--- Begin Message ---
Package: linux-2.6
Version: 2.6.38-4
Severity: normal
When trying to mount NTFS partition, I get an error that inserting
module fuse failed due to "kstrtoull" being an unknown symbol and the
drive is not mounted.
$ sudo mount -t ntfs-3g /dev/sdb1 /mnt/disk
FATAL: Error inserting fuse
(/lib/modules/2.6.38-2-amd64/kernel/fs/fuse/fuse.ko): Unknown symbol in module,
or unknown parameter (see dmesg)
ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
$
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64
root=UUID=163ded38-b055-41d5-9664-d873b0a0f92e ro
** Tainted: WIO (6656)
* Taint on warning.
* Working around severe firmware bug.
* Out-of-tree module has been loaded.
** Kernel log:
[258506.647370] PM: early resume of devices complete after 7.025 msecs
[258506.647507] i915 0000:00:02.0: setting latency timer to 64
[258506.653913] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[258506.653937] usb usb3: root hub lost power or was reset
[258506.653950] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[258506.653973] usb usb4: root hub lost power or was reset
[258506.653984] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[258506.654008] usb usb5: root hub lost power or was reset
[258506.654021] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[258506.654117] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[258506.654141] usb usb6: root hub lost power or was reset
[258506.654152] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[258506.654176] usb usb7: root hub lost power or was reset
[258506.654187] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[258506.654211] usb usb8: root hub lost power or was reset
[258506.654223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[258506.654263] pci 0000:00:1e.0: setting latency timer to 64
[258506.654275] ata_piix 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[258506.654280] ata_piix 0000:00:1f.2: setting latency timer to 64
[258506.654294] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[258506.654298] ata_piix 0000:00:1f.5: setting latency timer to 64
[258506.654324] iwlagn 0000:02:00.0: RF_KILL bit toggled to disable radio.
[258506.656019] tg3 0000:85:00.0: eth0: Link is down
[258506.684793] sd 0:0:0:0: [sda] Starting disk
[258506.711001] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[258506.711013] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[258506.711025] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[258506.711034] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[258506.711047] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[258506.711060] HDA Intel 0000:00:1b.0: setting latency timer to 64
[258506.711137] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[258506.740256] firewire_core: skipped bus generations, destroying all nodes
[258507.044124] usb 4-1: reset full speed USB device using uhci_hcd and address
2
[258507.160327] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[258507.168586] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[258507.168595] ata2.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered
out
[258507.184538] ata2.00: configured for UDMA/100
[258507.240310] firewire_core: rediscovered device fw0
[258507.547491] serial 00:09: activated
[258507.550806] parport_pc 00:0a: activated
[258509.620304] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[258509.652501] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[258509.652510] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered
out
[258509.684457] ata1.00: configured for UDMA/100
[258509.770467] PM: resume of devices complete after 3123.016 msecs
[258509.966353] PM: Finishing wakeup.
[258509.966359] Restarting tasks ... done.
[258509.988749] video LNXVIDEO:00: Restoring backlight state
[258510.260291] usb 6-2: new low speed USB device using uhci_hcd and address 5
[258510.440583] usb 6-2: New USB device found, idVendor=0461, idProduct=4d20
[258510.440588] usb 6-2: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[258510.440592] usb 6-2: Product: USB Optical Mouse
[258510.456943] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input15
[258510.457176] generic-usb 0003:0461:4D20.0004: input,hidraw0: USB HID v1.11
Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[258759.814949] iwlagn 0000:02:00.0: RF_KILL bit toggled to enable radio.
[258759.913646] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[258760.472270] usb 3-1: new full speed USB device using uhci_hcd and address 7
[258760.640327] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[258760.640338] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[258760.640344] usb 3-1: Product: HP Integrated Module
[258760.640349] usb 3-1: Manufacturer: Broadcom Corp
[258766.649130] wlan0: authenticate with e0:cb:4e:56:93:4a (try 1)
[258766.651085] wlan0: authenticated
[258766.651145] wlan0: associate with e0:cb:4e:56:93:4a (try 1)
[258766.655978] wlan0: RX AssocResp from e0:cb:4e:56:93:4a (capab=0x411
status=0 aid=5)
[258766.655987] wlan0: associated
[258766.657905] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[258777.008233] wlan0: no IPv6 routers present
[277042.328065] usb 2-1: new high speed USB device using ehci_hcd and address 10
[277042.462042] usb 2-1: New USB device found, idVendor=1058, idProduct=0704
[277042.462054] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[277042.462060] usb 2-1: Product: External HDD
[277042.462065] usb 2-1: Manufacturer: Western Digital
[277042.462070] usb 2-1: SerialNumber: 57442D575834304136395537373431
[277042.462769] usb-storage 2-1:1.0: Quirks match for vid 1058 pid 0704: 8000
[277042.462852] scsi8 : usb-storage 2-1:1.0
[277043.461066] scsi 8:0:0:0: Direct-Access WD 5000BMV External 1.75
PQ: 0 ANSI: 4
[277043.465023] sd 8:0:0:0: Attached scsi generic sg2 type 0
[277043.465109] sd 8:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[277043.465623] sd 8:0:0:0: [sdb] Write Protect is off
[277043.465631] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[277043.466370] sd 8:0:0:0: [sdb] No Caching mode page present
[277043.466376] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[277043.468730] sd 8:0:0:0: [sdb] No Caching mode page present
[277043.468739] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[277043.501157] sdb: sdb1
[277043.503228] sd 8:0:0:0: [sdb] No Caching mode page present
[277043.503232] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[277043.503234] sd 8:0:0:0: [sdb] Attached SCSI disk
[277044.834376] fuse: Unknown symbol kstrtoull (err 0)
[277046.573621] fuse: Unknown symbol kstrtoull (err 0)
[277061.352483] fuse: Unknown symbol kstrtoull (err 0)
[277107.916377] fuse: Unknown symbol kstrtoull (err 0)
[277109.787582] fuse: Unknown symbol kstrtoull (err 0)
[277140.800676] fuse: Unknown symbol kstrtoull (err 0)
[277142.653617] fuse: Unknown symbol kstrtoull (err 0)
[277183.336923] fuse: Unknown symbol kstrtoull (err 0)
[277185.196966] fuse: Unknown symbol kstrtoull (err 0)
[277524.450286] usb 2-1: USB disconnect, address 10
[277649.252593] fuse: Unknown symbol kstrtoull (err 0)
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 6730b (GB991EA#AKB)
product_version: F.08
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68PDD Ver. F.08
board_vendor: Hewlett-Packard
board_name: 30DD
board_version: KBC Version 96.18
** Loaded modules:
Module Size Used by
nls_utf8 12456 0
nls_cp437 16553 0
btrfs 428766 0
zlib_deflate 25466 1 btrfs
crc32c 12656 1
libcrc32c 12426 1 btrfs
ufs 61682 0
qnx4 13184 0
hfsplus 75370 0
hfs 45666 0
minix 27349 0
ntfs 166790 0
vfat 17165 0
msdos 17070 0
fat 45206 2 vfat,msdos
jfs 140566 0
xfs 603664 0
exportfs 12591 1 xfs
reiserfs 198112 0
ext4 285166 0
jbd2 65157 1 ext4
ext2 62796 0
cryptd 14463 0
aes_x86_64 16796 0
aes_generic 37122 1 aes_x86_64
xts 12645 0
gf128mul 13000 1 xts
dm_crypt 22256 0
dm_mod 62467 1 dm_crypt
usb_storage 43639 0
uas 13151 0
hidp 17832 0
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_userspace 12576 0
cpufreq_powersave 12454 0
cpufreq_conservative 13878 0
cpufreq_stats 12713 0
sco 17555 2
rfcomm 32744 8
bnep 17424 2
l2cap 40163 17 hidp,rfcomm,bnep
crc16 12343 2 ext4,l2cap
vboxnetadp 13143 0
vboxnetflt 24179 0
vboxdrv 171737 2 vboxnetadp,vboxnetflt
uinput 17392 1
firewire_sbp2 17825 0
loop 22515 0
snd_hda_codec_analog 77560 1
arc4 12458 2
ecb 12737 2
usbhid 39900 0
hid 72616 2 hidp,usbhid
uvcvideo 57386 0
videodev 57418 1 uvcvideo
v4l2_compat_ioctl32 16575 1 videodev
snd_hda_intel 25946 4
snd_hda_codec 67647 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67327 3 snd_hda_intel,snd_hda_codec
iwlagn 141628 0
btusb 17417 2
tpm_infineon 16875 0
bluetooth 55503 10 hidp,sco,rfcomm,bnep,l2cap,btusb
snd_seq 44678 0
iwlcore 59776 1 iwlagn
mac80211 180997 2 iwlagn,iwlcore
snd_timer 22658 3 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
snd 52280 14
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 13014 1 snd
cfg80211 126017 3 iwlagn,iwlcore,mac80211
i915 315266 3
drm_kms_helper 26893 1 i915
drm 165567 4 i915,drm_kms_helper
parport_pc 22191 0
parport 31650 1 parport_pc
hp_wmi 13094 0
joydev 17138 0
sparse_keymap 12760 1 hp_wmi
container 12581 0
hp_accel 21104 0
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
lis3lv02d 17723 1 hp_accel
input_polldev 12906 1 lis3lv02d
i2c_algo_bit 12834 1 i915
tpm_tis 13125 0
i2c_core 23725 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
tpm 17726 2 tpm_infineon,tpm_tis
pcspkr 12579 0
psmouse 55199 0
wmi 13202 1 hp_wmi
button 12994 1 i915
ac 12624 0
rfkill 19014 5 bluetooth,cfg80211,hp_wmi
tpm_bios 12903 1 tpm
serio_raw 12878 0
video 17553 1 i915
battery 13070 0
power_supply 13475 2 ac,battery
evdev 17475 17
processor 27431 3 acpi_cpufreq
ext3 112218 2
jbd 41698 1 ext3
mbcache 12930 3 ext4,ext2,ext3
sg 25769 0
sr_mod 21824 0
sd_mod 35501 4
cdrom 35134 1 sr_mod
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
uhci_hcd 26290 0
ata_piix 25319 3
libata 147240 2 ata_generic,ata_piix
firewire_ohci 30887 0
ehci_hcd 39529 0
tg3 109263 0
firewire_core 47683 2 firewire_sbp2,firewire_ohci
scsi_mod 161457 7
usb_storage,uas,firewire_sbp2,sg,sr_mod,sd_mod,libata
crc_itu_t 12347 1 firewire_core
usbcore 122908 8
usb_storage,uas,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
libphy 18759 1 tg3
fan 12674 0
thermal 17330 0
thermal_sys 17939 4 video,processor,fan,thermal
nls_base 12753 9
nls_utf8,nls_cp437,hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 98000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 6120 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 98400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 60a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at 98904400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30e6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 98900000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 98800000-988fffff
Prefetchable memory behind bridge: 0000000098a00000-0000000098bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 98700000-987fffff
Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
I/O behind bridge: 00004000-00005fff
Memory behind bridge: 94000000-97ffffff
Prefetchable memory behind bridge: 0000000098e00000-0000000098ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: 90000000-93ffffff
Prefetchable memory behind bridge: 0000000099000000-00000000991fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=85, subordinate=85, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: 98600000-986fffff
Prefetchable memory behind bridge: 0000000099200000-00000000993fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 6020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 0: Memory at 98904000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=86, subordinate=86, sec-latency=32
Memory behind bridge: 98500000-985fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller [8086:2928] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 60f0 [size=16]
Region 5: I/O ports at 60e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.5 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller [8086:292d] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 6108 [size=8]
Region 1: I/O ports at 612c [size=4]
Region 2: I/O ports at 6100 [size=8]
Region 3: I/O ports at 6128 [size=4]
Region 4: I/O ports at 60d0 [size=16]
Region 5: I/O ports at 60c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN
[Shiloh] Network Connection [8086:4237]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at 98700000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
85:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M
Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 98600000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
86:02.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev
70) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 98500000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd
Bus 006 Device 005: ID 0461:4d20 Primax Electronics, Ltd
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 003 Device 007: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN)
Interface [Integrated Module]
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--- End Message ---