Bug#647900: linux-image-3.0.0-1-sparc64-smp: Server fails to boot with illegal instruction on SunFire v490

2011-11-07 Thread Biblioteka UR

Package: linux-image-3.0.0-1-sparc64-smp
Version: 3.0.0-3
Severity: important

Dear Maintainer,
Server fails to boot on my v490 with 2 dual processors ultrasparc machine. It 
does not boot at all.
I join to the but report the output of the boot capture through the serial port.


-- Package-specific info:
** boot messages below

Sun Fire V490, No Keyboard
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.4, 8192 MB memory installed, Serial #67176146.
Ethernet address 0:14:4f:1:6:d2, Host ID: 840106d2.

Initializing 1MB of memory at addra1ffb2c000
Initializing12MB of memory at addra1ff00
Initializing  8176MB of memory at addra0
Rebooting with command: boot
Boot device: /pci@8,60/scsi@1/disk@0,0  File and args:
SILO Version 1.4.14
boot:
Allocated 64 Megs of memory at 0x4000 for kernel
Uncompressing image...

Loaded kernel version 3.0.0
Loading initial ramdisk (10098428 bytes at 0xA1FF00 phys, 0x40C0 virt).
/
[0.00] PROMLIB: Sun IEEE Boot Prom 'OBP 4.30.4 2009/08/19 07:20'
[0.00] PROMLIB: Root node compatible:
[0.00] Initializing cgroup subsys cpuset
[0.00] Initializing cgroup subsys cpu
[0.00] Linux version 3.0.0-1-sparc64-smp (Debian 3.0.0-3) 
(b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 
19:51:14 UTC 20
[0.00] bootconsole [earlyprom0] enabled
[0.00] ARCH: SUN4U
[0.00] Ethernet address: 00:14:4f:01:06:d2
[0.00] Kernel: Using 2 locked TLB entries for main kernel image.
[0.00] Remapping the kernel... done.
[0.00] OF stdout device is: /pci@9,70/ebus@1/serial@1,40:a
[0.00] PROM: Built device tree with 101044 bytes of memory.
[0.00] Top of RAM: 0xa1ffb2e000, Total RAM: 0x1ffb18000
[0.00] Memory hole size: 655360MB
[0.00] [01014000-f8a000c0] page_structs=131072 node=0 
etry=1280/8192
[0.00] [01014000-f8a00100] page_structs=131072 node=0 
etry=1281/8192
[0.00] [01014080-f8a00140] page_structs=131072 node=0 
etry=1282/8192
[0.00] [01014080-f8a00180] page_structs=131072 node=0 
etry=1283/8192
[0.00] [01014100-f8a001c0] page_structs=131072 node=0 
etry=1284/8192
[0.00] [01014100-f8a00200] page_structs=131072 node=0 
etry=1285/8192
[0.00] [01014180-f8a00240] page_structs=131072 node=0 
etry=1286/8192
[0.00] [01014180-f8a00280] page_structs=131072 node=0 
etry=1287/8192
[0.00] [01014200-f8a002c0] page_structs=131072 node=0 
etry=1288/8192
[0.00] [01014200-f8a00300] page_structs=131072 node=0 
etry=1289/8192
[0.00] [01014280-f8a00340] page_structs=131072 node=0 
etry=1290/8192
[0.00] [01014280-f8a00380] page_structs=131072 node=0 
etry=1291/8192
[0.00] [01014300-f8a003c0] page_structs=131072 node=0 
etry=1292/8192
[0.00] [01014300-f8a00400] page_structs=131072 node=0 
etry=1293/8192
[0.00] [01014380-f8a00440] page_structs=131072 node=0 
etry=1294/8192
[0.00] [01014380-f8a00480] page_structs=131072 node=0 
etry=1295/8192
[0.00] Zone PFN ranges:
[0.00]   Normal   0x0500 -  0x050ffd97
[0.00] Movable zone start PFN for each node
[0.00] early_node_map[4] active PFN ranges
[0.00] 0: 0x0500 -  0x050ff7ff
[0.00] 0: 0x050ff800 -  0x050ffd7c
[0.00] 0: 0x050ffd84 -  0x050ffd94
[0.00] 0: 0x050ffd96 -  0x050ffd97
[0.00] Booting Linux...
[0.00] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[0.00] CPU CAPS: [v8plus,popc,vis,vis2]
[0.00] PERCPU: Embedded 6 pages/cpu @f8a004c0 s12352 r8192 
d2868 u1048576
[0.00] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1039760
[0.00] Kernel command line: root=/dev/sda2 ro
[0.00] PID hash table entries: 4096 (order: 2, 32768 bytes)
[0.00] Dentry cache hash table entries: 1048576 (order: 10, 8388608 
bytes)
[0.00] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[0.00] Memory: 8288896k available (3632k kernel code, 1560k data, 232k
init) [f800,00a1ffb2e000]
[0.00] Hierarchical RCU implementation.
[0.00] CONFIG_RCU_FANOUT set to non-default value of 32
[0.00] RCU dyntick-idle grace-period acceleration is enabled.
[0.00] NR_IRQS:255
[0.00] clocksource: mult[6400] shift[24]
[0.00] clockevent: mult[28f5c29] shift[32]
[0.00] Console: colour dummy device 80x25
[0.00] console [tty0] enabled, bootconsole disabled
[0.00] PROMLIB: Sun IEEE Boot Prom 'OBP 4.30.4 2009/08/19 07:20'
[

Bug#647900: linux-image-3.0.0-1-sparc64-smp: Server fails to boot with illegal instruction on SunFire v490

2011-11-07 Thread Ben Hutchings
Your subject refers to an 'illegal instruction' error but I don't
see that in the log messages you attached.  Where do you see this
error?

What was the last kernel version that worked on this system in an
SMP configuration?

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
  - Albert Camus



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/2007205409.gg3...@decadent.org.uk



Bug#647900: linux-image-3.0.0-1-sparc64-smp: Server fails to boot with illegal instruction on SunFire v490

2011-11-07 Thread Biblioteka UR

W dniu 2011-11-07 21:54, Ben Hutchings pisze:

Your subject refers to an 'illegal instruction' error but I don't
see that in the log messages you attached.  Where do you see this
error?
Sorry. This is my first notification and first contact with Debian. I 
based on a different notification (my english is poor).
Server starts and last entries from the log messagess are repeated. 
Server can't boot to the end.


I tried with linux-image-2.6-*-smp (last version) - the same.

What was the last kernel version that worked on this system in an
SMP configuration?

Ben.
This is my first installation of Debian. I had Solaris on this machine 
to this time.


Thank you in advance for your help.

Mariusz



--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4eb858e8.6090...@univ.rzeszow.pl