Bug#774576: linux-image-3.16.0-4-amd64: SATA errors with non-faulty disks
Had the same SATA error messages after changing OS from Wheezy 32-Bit to Jessie 64-Bit, saw them when copying big (some 100 MBs) files. But the MD5-Sums of copied files where the same as the of the original files, so there seemed to be no real impact. Had the SATA disk (Samsung SSD 830 series) in use for years without problem before. SMART was also looking good. Solution for me was replacing the SATA cable with another one from another producer (saw that solution somewhere on the internet). Just grabbed in the hardware box and took that other cable- the mentioned error messages did not occur anymore. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150428214158.4139e...@koog.heimnetz.zone
Bug#774576: linux-image-3.16.0-4-amd64: SATA errors with non-faulty disks
Package: src:linux Version: 3.19.1-1~exp1 Followup-For: Bug #774576 I have been running into the same problem on my box here. Nothing visibly breaks, but the messages are worrisome. [ 32.085102] wlan0: associated [ 1328.949241] ata1.00: exception Emask 0x10 SAct 0x20 SErr 0x440100 action 0x6 frozen [ 1328.949249] ata1.00: irq_stat 0x0800, interface fatal error [ 1328.949254] ata1: SError: { UnrecovData CommWake Handshk } [ 1328.949259] ata1.00: failed command: WRITE FPDMA QUEUED [ 1328.949267] ata1.00: cmd 61/80:a8:00:20:06/03:00:16:00:00/40 tag 21 ncq 458752 out res 40/00:ac:00:20:06/00:00:16:00:00/40 Emask 0x10 (ATA bus error) [ 1328.949271] ata1.00: status: { DRDY } [ 1328.949277] ata1: hard resetting link [ 1329.269196] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1329.271370] ata1.00: configured for UDMA/133 [ 1329.271484] ata1: EH complete -- Package-specific info: ** Version: Linux version 3.19.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19.1-1~exp1 (2015-03-08) ** Command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-amd64 root=/dev/mapper/SSHDCrypt-ROOT ro cgroup_enable=memory swapaccount=1 rootflags=data=writeback quiet ** Not tainted ** Kernel log: [ 11.850316] ACPI: AC Adapter [ACAD] (off-line) [ 11.983249] EFI Variables Facility v0.08 2004-May-17 [ 12.057422] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.087745] ACPI: Battery Slot [BAT1] (battery present) [ 12.127673] pstore: Registered efi as persistent store backend [ 12.347632] cfg80211: Calling CRDA to update world regulatory domain [ 12.352715] [drm] Initialized drm 1.1.0 20060810 [ 12.658527] input: Ideapad extra buttons as /devices/pci:00/:00:1f.0/PNP0C09:00/VPC2004:00/input/input7 [ 12.839101] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x127c00, board id: 2132, fw id: 1517529 [ 12.887240] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 13.213143] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 13.213147] sound hdaudioC1D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.213149] sound hdaudioC1D0:hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 13.213151] sound hdaudioC1D0:mono: mono_out=0x0 [ 13.213152] sound hdaudioC1D0:inputs: [ 13.213154] sound hdaudioC1D0: Mic=0x19 [ 13.213156] sound hdaudioC1D0: Internal Mic=0x12 [ 13.217556] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/sound/card1/hdaudioC1D0/input8 [ 13.217675] input: HDA Intel PCH Mic as /devices/pci:00/:00:1b.0/sound/card1/input9 [ 13.217716] input: HDA Intel PCH Front Headphone as /devices/pci:00/:00:1b.0/sound/card1/input10 [ 13.243737] iTCO_vendor_support: vendor-support=0 [ 13.282987] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin [ 13.311388] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.311423] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 13.311518] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.377951] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 13.378183] rtlwifi: rtlwifi: wireless switch is on [ 13.566745] rtl8723be :01:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 13.649484] [drm] Memory usable by graphics device = 2048M [ 13.649487] checking generic (a000 7e9000) vs hw (a000 1000) [ 13.649488] fb: switching to inteldrmfb from simple [ 13.649512] Console: switching to colour dummy device 80x25 [ 13.649562] [drm] Replacing VGA console driver [ 13.672711] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.672713] [drm] Driver supports precise vblank timestamp query. [ 13.672784] vgaarb: device changed decodes: PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.742570] fbcon: inteldrmfb (fb0) is primary device [ 13.742727] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.742903] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 13.742972] [drm] Initialized i915 1.6.0 20141121 for :00:02.0 on minor 0 [ 14.095521] input: ELAN Touchscreen as /devices/pci:00/:00:14.0/usb1/1-5/1-5:1.0/0003:04F3:0303.0001/input/input12 [ 14.095678] hid-multitouch 0003:04F3:0303.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-:00:14.0-5/input0 [ 14.177582] media: Linux media interface: v0.10 [ 14.230260] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci:00/:00:03.0/sound/card0/input14 [ 14.230342] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci:00/:00:03.0/sound/card0/input15 [ 14.230438] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci:00/:00:03.0/sound/card0/input16 [ 14.230890] Bluetooth: Core ver 2.20 [ 14.230898] NET: Registered protocol family 31
Bug#774576: linux-image-3.16.0-4-amd64: SATA errors with non-faulty disks
This also happens on the Jessie kernel. s3nt fr0m a $martph0ne, excuse typ0s On Mar 22, 2015 7:32 PM, Ritesh Raj Sarraf r...@debian.org wrote: Package: src:linux Version: 3.19.1-1~exp1 Followup-For: Bug #774576 I have been running into the same problem on my box here. Nothing visibly breaks, but the messages are worrisome. [ 32.085102] wlan0: associated [ 1328.949241] ata1.00: exception Emask 0x10 SAct 0x20 SErr 0x440100 action 0x6 frozen [ 1328.949249] ata1.00: irq_stat 0x0800, interface fatal error [ 1328.949254] ata1: SError: { UnrecovData CommWake Handshk } [ 1328.949259] ata1.00: failed command: WRITE FPDMA QUEUED [ 1328.949267] ata1.00: cmd 61/80:a8:00:20:06/03:00:16:00:00/40 tag 21 ncq 458752 out res 40/00:ac:00:20:06/00:00:16:00:00/40 Emask 0x10 (ATA bus error) [ 1328.949271] ata1.00: status: { DRDY } [ 1328.949277] ata1: hard resetting link [ 1329.269196] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1329.271370] ata1.00: configured for UDMA/133 [ 1329.271484] ata1: EH complete -- Package-specific info: ** Version: Linux version 3.19.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19.1-1~exp1 (2015-03-08) ** Command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-amd64 root=/dev/mapper/SSHDCrypt-ROOT ro cgroup_enable=memory swapaccount=1 rootflags=data=writeback quiet ** Not tainted ** Kernel log: [ 11.850316] ACPI: AC Adapter [ACAD] (off-line) [ 11.983249] EFI Variables Facility v0.08 2004-May-17 [ 12.057422] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.087745] ACPI: Battery Slot [BAT1] (battery present) [ 12.127673] pstore: Registered efi as persistent store backend [ 12.347632] cfg80211: Calling CRDA to update world regulatory domain [ 12.352715] [drm] Initialized drm 1.1.0 20060810 [ 12.658527] input: Ideapad extra buttons as /devices/pci:00/:00:1f.0/PNP0C09:00/VPC2004:00/input/input7 [ 12.839101] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x127c00, board id: 2132, fw id: 1517529 [ 12.887240] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 13.213143] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 13.213147] sound hdaudioC1D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.213149] sound hdaudioC1D0:hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 13.213151] sound hdaudioC1D0:mono: mono_out=0x0 [ 13.213152] sound hdaudioC1D0:inputs: [ 13.213154] sound hdaudioC1D0: Mic=0x19 [ 13.213156] sound hdaudioC1D0: Internal Mic=0x12 [ 13.217556] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/sound/card1/hdaudioC1D0/input8 [ 13.217675] input: HDA Intel PCH Mic as /devices/pci:00/:00:1b.0/sound/card1/input9 [ 13.217716] input: HDA Intel PCH Front Headphone as /devices/pci:00/:00:1b.0/sound/card1/input10 [ 13.243737] iTCO_vendor_support: vendor-support=0 [ 13.282987] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin [ 13.311388] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.311423] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 13.311518] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.377951] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 13.378183] rtlwifi: rtlwifi: wireless switch is on [ 13.566745] rtl8723be :01:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 13.649484] [drm] Memory usable by graphics device = 2048M [ 13.649487] checking generic (a000 7e9000) vs hw (a000 1000) [ 13.649488] fb: switching to inteldrmfb from simple [ 13.649512] Console: switching to colour dummy device 80x25 [ 13.649562] [drm] Replacing VGA console driver [ 13.672711] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.672713] [drm] Driver supports precise vblank timestamp query. [ 13.672784] vgaarb: device changed decodes: PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.742570] fbcon: inteldrmfb (fb0) is primary device [ 13.742727] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.742903] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 13.742972] [drm] Initialized i915 1.6.0 20141121 for :00:02.0 on minor 0 [ 14.095521] input: ELAN Touchscreen as /devices/pci:00/:00:14.0/usb1/1-5/1-5:1.0/0003:04F3:0303.0001/input/input12 [ 14.095678] hid-multitouch 0003:04F3:0303.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-:00:14.0-5/input0 [ 14.177582] media: Linux media interface: v0.10 [ 14.230260] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci:00/:00:03.0/sound/card0/input14 [ 14.230342] input: HDA Intel HDMI HDMI/DP,pcm=7 as
Bug#774576: linux-image-3.16.0-4-amd64: SATA errors with non-faulty disks
Package: src:linux Version: 3.16.7-ckt2-1 Severity: grave Justification: causes non-serious data loss Dear Maintainer, I'm getting SATA errors with my drives, using two different motherboards (old one, Nvidia chipset, new one, Intel chipset), new, quality SATA cables, a new, yesterday-bought hard disk. Seems the errors come more frequently when the drives wake up from sleep. [Sun Jan 4 16:20:36 2015] ata2.00: status: { DRDY } [Sun Jan 4 16:20:36 2015] ata2.00: failed command: WRITE FPDMA QUEUED [Sun Jan 4 16:20:36 2015] ata2.00: cmd 61/10:f0:c0:09:40/00:00:3d:00:00/40 tag 30 ncq 8192 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [Sun Jan 4 16:20:36 2015] ata2.00: status: { DRDY } [Sun Jan 4 16:20:36 2015] ata2: hard resetting link [Sun Jan 4 16:20:37 2015] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [Sun Jan 4 16:20:37 2015] ata2.00: configured for UDMA/133 [Sun Jan 4 16:20:37 2015] ata2: EH complete [Sun Jan 4 16:22:07 2015] ata4.00: exception Emask 0x0 SAct 0x180 SErr 0x0 action 0x6 frozen [Sun Jan 4 16:22:07 2015] ata4.00: failed command: WRITE FPDMA QUEUED [Sun Jan 4 16:22:07 2015] ata4.00: cmd 61/08:b8:00:08:00/00:00:00:00:00/40 tag 23 ncq 4096 out res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [Sun Jan 4 16:22:07 2015] ata4.00: status: { DRDY } [Sun Jan 4 16:22:07 2015] ata4.00: failed command: WRITE FPDMA QUEUED [Sun Jan 4 16:22:07 2015] ata4.00: cmd 61/08:c0:00:08:04/00:00:3a:00:00/40 tag 24 ncq 4096 out res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [Sun Jan 4 16:22:07 2015] ata4.00: status: { DRDY } [Sun Jan 4 16:22:07 2015] ata4: hard resetting link [Sun Jan 4 16:22:08 2015] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [Sun Jan 4 16:22:08 2015] ata4.00: configured for UDMA/133 [Sun Jan 4 16:22:08 2015] ata4.00: device reported invalid CHS sector 0 [Sun Jan 4 16:22:08 2015] ata4.00: device reported invalid CHS sector 0 [Sun Jan 4 16:22:08 2015] ata4: EH complete [Sun Jan 4 16:45:33 2015] ata4.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x6 frozen [Sun Jan 4 16:45:33 2015] ata4.00: failed command: READ FPDMA QUEUED [Sun Jan 4 16:45:33 2015] ata4.00: cmd 60/20:b0:08:08:80/00:00:5a:00:00/40 tag 22 ncq 16384 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [Sun Jan 4 16:45:33 2015] ata4.00: status: { DRDY } [Sun Jan 4 16:45:33 2015] ata4: hard resetting link [Sun Jan 4 16:45:33 2015] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [Sun Jan 4 16:45:33 2015] ata4.00: configured for UDMA/133 [Sun Jan 4 16:45:33 2015] ata4.00: device reported invalid CHS sector 0 [Sun Jan 4 16:45:33 2015] ata4: EH complete -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=9b2fd7b4-8d27-45e8-86f4-24c53f451c99 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533823] ata2.00: status: { DRDY } [29316.533824] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533825] ata2.00: cmd 61/18:70:90:0c:40/00:00:3d:00:00/40 tag 14 ncq 12288 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533826] ata2.00: status: { DRDY } [29316.533827] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533828] ata2.00: cmd 61/10:78:e0:0c:40/00:00:3d:00:00/40 tag 15 ncq 8192 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533829] ata2.00: status: { DRDY } [29316.533830] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533831] ata2.00: cmd 61/10:80:f8:0c:40/00:00:3d:00:00/40 tag 16 ncq 8192 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533832] ata2.00: status: { DRDY } [29316.533833] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533834] ata2.00: cmd 61/10:88:10:0d:40/00:00:3d:00:00/40 tag 17 ncq 8192 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533835] ata2.00: status: { DRDY } [29316.533836] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533837] ata2.00: cmd 61/38:90:28:0d:40/00:00:3d:00:00/40 tag 18 ncq 28672 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533838] ata2.00: status: { DRDY } [29316.533839] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533840] ata2.00: cmd 61/10:98:b0:0d:40/00:00:3d:00:00/40 tag 19 ncq 8192 out res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error) [29316.533841] ata2.00: status: { DRDY } [29316.533842] ata2.00: failed command: WRITE FPDMA QUEUED [29316.533843] ata2.00: cmd 61/18:a0:d0:0d:40/00:00:3d:00:00/40 tag 20 ncq 12288 out res