Your message dated Fri, 30 Apr 2021 15:31:08 +0200
with message-id <E1lcTEJ-001M3O-3k@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #781423,
regarding linux-image-3.16.0-4-amd64: BUG: Bad page map in process x
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
781423: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=781423
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.7-ckt7-1
Severity: important
Hello all,
This is more or less a followup to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=708064
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=708737
only for a more recent kernel version added with a new kind of message.
All of them seem to point to problems in the VM system, though.
FWIW, I also get
BUG: Bad rss-counter state
messages, but even upstream at
http://comments.gmane.org/gmane.linux.kernel/1316358
seems to have no solution for that. They provide
https://lkml.org/lkml/2012/6/9/47
which comes up empty for me …
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=0a492183-24f8-4fcf-a41b-434efd825fe8 ro quiet
nouveau.config=NvBios=vbios.rom
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 10.894280] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[ 10.924249] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[ 10.924281] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 10.936439] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 11.001450] wmi: Mapper loaded
[ 11.072321] iTCO_vendor_support: vendor-support=0
[ 11.095208] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.095251] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 11.095358] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.191089] b43 ssb0:0: firmware: direct-loading firmware b43/ucode11.fw
[ 11.345433] b43 ssb0:0: firmware: direct-loading firmware b43/n0initvals11.fw
[ 11.436026] b43 ssb0:0: firmware: direct-loading firmware
b43/n0bsinitvals11.fw
[ 11.560402] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.703635] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x084700a2
[ 11.703639] nouveau [ DEVICE][0000:01:00.0] Chipset: G84 (NV84)
[ 11.703641] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 11.754997] nouveau 0000:01:00.0: firmware: direct-loading firmware vbios.rom
[ 11.755025] nouveau [ VBIOS][0000:01:00.0] image: vbios.rom
[ 11.755070] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 11.755162] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 11.755165] nouveau [ VBIOS][0000:01:00.0] version 60.84.49.03.00
[ 11.775217] nouveau 0000:01:00.0: irq 47 for MSI/MSI-X
[ 11.775229] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 11.775264] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
[ 11.775266] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 11.775268] nouveau [ PFB][0000:01:00.0] ZCOMP: 1892 tags
[ 11.777111] nouveau [ VOLT][0000:01:00.0] GPU voltage: 1130000uv
[ 11.806301] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 11.806310] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 11.806314] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 11.806333] nouveau [ CLK][0000:01:00.0] 20: core 169 MHz shader 338
MHz memory 100 MHz
[ 11.806336] nouveau [ CLK][0000:01:00.0] 21: core 283 MHz shader 566
MHz memory 297 MHz
[ 11.806339] nouveau [ CLK][0000:01:00.0] 22: core 375 MHz shader 750
MHz memory 502 MHz
[ 11.806344] nouveau [ CLK][0000:01:00.0] 23: core 470 MHz shader 940
MHz memory 635 MHz
[ 11.806373] nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 550
MHz memory 302 MHz
[ 11.806526] [TTM] Zone kernel: Available graphics memory: 1019504 kiB
[ 11.806528] [TTM] Initializing pool allocator
[ 11.806534] [TTM] Initializing DMA pool allocator
[ 11.806545] nouveau [ DRM] VRAM: 512 MiB
[ 11.806547] nouveau [ DRM] GART: 1048576 MiB
[ 11.806550] nouveau [ DRM] TMDS table version 2.0
[ 11.806552] nouveau [ DRM] DCB version 4.0
[ 11.806554] nouveau [ DRM] DCB outp 00: 01000123 00010034
[ 11.806556] nouveau [ DRM] DCB outp 01: 02011210 00000028
[ 11.806558] nouveau [ DRM] DCB outp 02: 02011212 00000030
[ 11.806560] nouveau [ DRM] DCB outp 03: 01011211 0080c070
[ 11.806562] nouveau [ DRM] DCB conn 00: 0040
[ 11.806564] nouveau [ DRM] DCB conn 01: 1120
[ 11.823431] nouveau W[ DRM] unknown connector type 20
[ 11.823473] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 11.823475] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.823476] [drm] Driver supports precise vblank timestamp query.
[ 11.840864] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 12.317529] input: bcm5974 as
/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.2/input/input12
[ 12.317773] usbcore: registered new interface driver bcm5974
[ 12.355367] media: Linux media interface: v0.10
[ 12.408853] Linux video capture interface: v2.00
[ 12.697316] Bluetooth: Core ver 2.19
[ 12.697342] NET: Registered protocol family 31
[ 12.697344] Bluetooth: HCI device and connection manager initialized
[ 12.697354] Bluetooth: HCI socket layer initialized
[ 12.697357] Bluetooth: L2CAP socket layer initialized
[ 12.697373] Bluetooth: SCO socket layer initialized
[ 12.813828] usbcore: registered new interface driver btusb
[ 12.891388] nouveau [ DRM] allocated 1440x900 fb: 0x70000, bo
ffff880079f0b800
[ 12.891482] fbcon: nouveaufb (fb0) is primary device
[ 12.977186] Console: switching to colour frame buffer device 180x56
[ 12.979495] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 12.979497] nouveau 0000:01:00.0: registered panic notifier
[ 12.992082] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on
minor 0
[ 13.068660] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[ 13.071471] input: Built-in iSight as
/devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4:1.0/input/input13
[ 13.071630] usbcore: registered new interface driver uvcvideo
[ 13.071632] USB Video Class driver (1.1.1)
[ 17.781297] Adding 4194300k swap on /dev/sda15. Priority:-1 extents:1
across:4194300k FS
[ 19.138298] EXT4-fs (sda16): mounted filesystem with ordered data mode.
Opts: data=ordered,user_xattr,acl
[ 20.106357] systemd-journald[152]: Received request to flush runtime journal
from PID 1
[ 20.579176] sky2 0000:0c:00.0 eth0: enabling interface
[ 20.579484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.534205] RPC: Registered named UNIX socket transport module.
[ 21.534209] RPC: Registered udp transport module.
[ 21.534210] RPC: Registered tcp transport module.
[ 21.534211] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.558723] FS-Cache: Loaded
[ 21.585912] FS-Cache: Netfs 'nfs' registered for caching
[ 21.637374] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 22.353587] sky2 0000:0c:00.0 eth0: Link is up at 100 Mbps, full duplex,
flow control both
[ 22.353624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.863245] vboxdrv: Found 2 processor cores.
[ 22.863654] vboxdrv: fAsync=0 offMin=0x19c offMax=0x92e
[ 22.863788] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 22.863790] vboxdrv: Successfully loaded version 4.3.18_Debian (interface
0x001a0008).
[ 23.698591] vboxpci: IOMMU not found (not registered)
[ 23.825128] applesmc: light sensor data length set to 6
[ 177.167296] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts:
data=ordered,user_xattr,acl
[ 679.966578] applesmc: send_byte(0x56, 0x0300) fail: 0x00
[ 679.966586] applesmc: ALV1: read arg fail
[ 2109.614272] ACPI : EC: GPE storm detected(9 GPEs), transactions will use
polling mode
[ 2113.031276] perf interrupt took too long (2510 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[ 3768.675111] perf interrupt took too long (5012 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
** Model information
sys_vendor: Apple Inc.
product_name: MacBookPro4,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-F42C89C8
bios_vendor: Apple Inc.
bios_version: MBP41.88Z.00C1.B03.0802271651
board_vendor: Apple Inc.
board_name: Mac-F42C89C8
board_version: PVT
** Loaded modules:
binfmt_misc
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
uvcvideo
ecb
btusb
videobuf2_vmalloc
bluetooth
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
bcm5974
6lowpan_iphc
nouveau
arc4
joydev
iTCO_wdt
iTCO_vendor_support
mxm_wmi
wmi
ttm
drm_kms_helper
b43
evdev
coretemp
drm
kvm_intel
i2c_algo_bit
kvm
bcma
mac80211
applesmc
input_polldev
snd_hda_codec_realtek
cfg80211
pcspkr
snd_hda_codec_generic
snd_hda_intel
i2c_i801
snd_hda_controller
i2c_core
snd_hda_codec
rfkill
snd_hwdep
rng_core
snd_pcm
snd_timer
snd
lpc_ich
mfd_core
soundcore
sbs
ac
sbshc
shpchp
acpi_cpufreq
battery
video
apple_bl
processor
thermal_sys
button
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_apple
hid_appleir
usbhid
hid
usb_storage
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
firewire_ohci
ata_piix
firewire_core
crc_itu_t
libata
scsi_mod
ssb
mmc_core
pcmcia
sky2
pcmcia_core
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub [8086:2a00] (rev 03)
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI
Express Root Port [8086:2a01] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 90000000-930fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 04) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 80c0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at 80a0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 04) (prog-if 20 [EHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 0: Memory at 9b504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 04)
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at 9b500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 9b400000-9b4fffff
Prefetchable memory behind bridge: 000000009b600000-000000009b7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 [8086:2843] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=0a, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 97400000-9b3fffff
Prefetchable memory behind bridge: 0000000093100000-00000000970fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 97300000-973fffff
Prefetchable memory behind bridge: 000000009b800000-000000009b9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 [8086:2849] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 97200000-972fffff
Prefetchable memory behind bridge: 000000009ba00000-000000009bbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 8080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 8060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 8040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 0: Memory at 9b504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32
Memory behind bridge: 97100000-971fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface
Controller [8086:2815] (rev 04)
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE
Controller [8086:2850] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 8108 [size=8]
Region 1: I/O ports at 811c [size=4]
Region 2: I/O ports at 8100 [size=8]
Region 3: I/O ports at 8118 [size=4]
Region 4: I/O ports at 80e0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
SATA Controller [IDE mode] [8086:2828] (rev 04) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 80f8 [size=8]
Region 1: I/O ports at 8114 [size=4]
Region 2: I/O ports at 80f0 [size=8]
Region 3: I/O ports at 8110 [size=4]
Region 4: I/O ports at 8020 [size=16]
Region 5: I/O ports at 4000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 04)
Subsystem: Apple Inc. Device [106b:00a3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at 9b505000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84M [GeForce
8600M GT] [10de:0407] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Apple Inc. Device [106b:00a3]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 7000 [size=128]
Expansion ROM at 93000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n
[14e4:4328] (rev 05)
Subsystem: Apple Inc. AirPort Extreme [106b:008c]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 97300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
0c:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8058 PCI-E
Gigabit Ethernet Controller [11ab:436a] (rev 13)
Subsystem: Marvell Technology Group Ltd. Imac 8,1 Wired Ethernet
Adapter [11ab:00ba]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 97200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 5000 [size=256]
Expansion ROM at 97220000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
0d:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link
Layer Controller [104c:8025] (rev 02) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 97104000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 97100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 007 Device 002: ID 05ac:8502 Apple, Inc. Built-in iSight
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 003: ID 05ac:0231 Apple, Inc. Internal Keyboard/Trackpad
(MacBook Pro 4,1) (ISO)
Bus 005 Device 002: ID 05ac:8242 Apple, Inc. Built-in IR Receiver
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 1058:1001 Western Digital Technologies, Inc. External
Hard Disk [Elements]
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05ac:820f Apple, Inc. Bluetooth HCI
Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.119
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-21
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
