Re: no mic on ibook g4
On 5/5/06, Magnus Rosenbaum [EMAIL PROTECTED] wrote: Paul Brossier wrote: I haven't been able to record from the microphone of this ibook g4 since at least 2.6.14 and up to 2.6.17-rc3. In my iBook G4 (PowerBook6,7) the mic works fine. Vanilla kernel 2.6.17-rc3 Which application you use for mic ? (My ibook G4 is a PowerBook6,5.) Best regards, Bin -- Carl Magnus Rosenbaum M.A. Tel: 089 - 700 666 26 Administration - Programmierung - Weiterbildung Fax: 089 - 700 666 86 http://cmr.forestfactory.de/ Mobil: 0163 - 700 666 2 PGP Fingerprint: DEBC 3C99 EF1D 74F0 D4C7 EFF5 C268 3690 0EA1 7641 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [RFC][Patch] Cirumvent appletouch fuzziness
Le jeudi 04 mai 2006 à 13:56 +0200, Johannes Berg a écrit : On Wed, 2006-05-03 at 17:16 +0200, Stelian Pop wrote: Sven: What Powerbook model do you have ? I know Johannes has the hi-res Powerbook, and I have the slighly older lo-res Powerbook... No, I have the lo-res too, my brother has the hi-res. Ah, my bad. I was half correct though :) -- Stelian Pop [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: no mic on ibook g4
Bin Zhang wrote: Which application you use for mic ? First I started alsamixer and switched Input So to Mic and turned up the volume for Monitor. Now I can hear it in the speakers if I knock on the mic. Then I recorded some seconds with arecord and checked them with aplay. Please note that I run Gentoo Linux and I have this alsa version: ibookx ~ # alsactl -v alsactl version 1.0.10 ibookx ~ # lsmod | grep snd snd_pcm_oss47008 0 snd_mixer_oss 19552 1 snd_pcm_oss snd_powermac 47004 0 snd_pcm92932 2 snd_pcm_oss,snd_powermac snd_timer 23044 1 snd_pcm snd60948 5 snd_pcm_oss,snd_mixer_oss,snd_powermac,snd_pcm,snd_timer soundcore 8676 1 snd snd_page_alloc 8776 1 snd_pcm cu, Magnum -- Carl Magnus Rosenbaum M.A. Tel: 089 - 700 666 26 Administration - Programmierung - Weiterbildung Fax: 089 - 700 666 86 http://cmr.forestfactory.de/ Mobil: 0163 - 700 666 2 PGP Fingerprint: DEBC 3C99 EF1D 74F0 D4C7 EFF5 C268 3690 0EA1 7641 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: no mic on ibook g4
On 5/5/06, Magnus Rosenbaum [EMAIL PROTECTED] wrote: Bin Zhang wrote: Which application you use for mic ? First I started alsamixer and switched Input So to Mic and turned up the volume for Monitor. Now I can hear it in the speakers if I knock on the mic. Same for me. Then I recorded some seconds with arecord and checked them with aplay. Same for me. But audacity doesn't work. Thanks for your help. But this is not a good solution. I could record using audacity when turning OFF the volume for Monitor (I don't remember with which kernel). If you turn on volume for Monitor, you may get much noise. Please note that I run Gentoo Linux and I have this alsa version: I don't think this make a difference for using mic. Thanks, Bin ibookx ~ # alsactl -v alsactl version 1.0.10 ibookx ~ # lsmod | grep snd snd_pcm_oss47008 0 snd_mixer_oss 19552 1 snd_pcm_oss snd_powermac 47004 0 snd_pcm92932 2 snd_pcm_oss,snd_powermac snd_timer 23044 1 snd_pcm snd60948 5 snd_pcm_oss,snd_mixer_oss,snd_powermac,snd_pcm,snd_timer soundcore 8676 1 snd snd_page_alloc 8776 1 snd_pcm cu, Magnum -- Carl Magnus Rosenbaum M.A. Tel: 089 - 700 666 26 Administration - Programmierung - Weiterbildung Fax: 089 - 700 666 86 http://cmr.forestfactory.de/ Mobil: 0163 - 700 666 2 PGP Fingerprint: DEBC 3C99 EF1D 74F0 D4C7 EFF5 C268 3690 0EA1 7641
Re: [RFC][Patch] Cirumvent appletouch fuzziness
Le mercredi 03 mai 2006 à 19:32 +0200, Magnus Rosenbaum a écrit : Stelian Pop wrote: Very rarely the appletouch driver stops working completly (sometimes after a resume from suspend to ram, sometimes for other unknown reason) and I have to reload the module in order to make it work again. But this happens just once per week (and I use the laptop daily for 10+ hours), so it never bothered me enough to look more closely. I can confirm this, it happens also on my two G4 iBooks (12 1,33 GHz PowerBook6,7). And I don't understand why it happens. The driver explicitely invalidates all the prior values on resume, so its status should be just the same as after the initialisation. Anyways, I am testing Sven's patch. It doesn't change much for me (since I don't have that problem), but as far it doesn't hurt either. Stelian. -- Stelian Pop [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: problem about boot process
On Fri, May 05, 2006 at 12:32:23PM +0800, yang wrote: Hi all: Give me a help. Errors happened during initial process . Here's init messages,I donnot know why it could enter into the login.Every time the process will halt at INIT:. This is mpc850+linux2.4.4 platform can't create lock file /etc/mtab~40: Read-only file system (use -n flag to over)/etc/rc.d/rc.sysinit: /etc/mtab: Read-only file system can't create lock file /etc/mtab~42: Read-only file system (use -n flag to over)can't create lock file /etc/mtab~43: Read-only file system (use -n flag to over)Starting watchdog: Watchdog daemon ver 0.1, (c) 2002, FEL co. ltd. [OK] touch: /var/lock/subsys/watchdog: Read-only file system INIT: /etc/rc.d/rc: /var/run/runlevel.dir: Read-only file system I'd have a look to all the files mentioned above. To me this looks like something's wrong in there thus stopping the boot process ... If you can't login you might want to chroot or rescue-mode into your system ... chroot-ing into a Debian system, hopefully at least valid some time ago: http://lists.debian.org/debian-powerpc/2003/10/msg00262.html But it does not look to me as if you're on a Debian system: Fedora, Novell? ... :) If yes, I'd check their documentation. Good luck! Best Regards Wolfgang -- Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/ http://profiles.yahoo.com/wolfgangpfeiffer Key ID: E3037113 http://keyserver.mine.nu/pks/lookup?search=0xE3037113fingerprint=on -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using kernel 2.6.17-rc2
Hi Bin! Hi Michael! Thanks for your hints! On Thu, May 04, 2006 at 03:24:25PM +0200, Bin Zhang wrote: I have /dev/adb and /proc/sys/dev/mac_hid. I think it's a kernel config problem. Yes, it looks like it, I somehow did miss to configure: CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y I wonder why make oldconfig did not enable it, but I also just might have screwed it up myself. Sorry for the noise. pgphRaSkfjeHt.pgp Description: PGP signature
Re: problem about boot process
On Fri, May 05, 2006 at 12:32:23PM +0800, yang wrote: Hi all: Give me a help. Errors happened during initial process . Here's init messages,I donnot know why it could enter into the login.Every time the process will halt at INIT:. This is mpc850+linux2.4.4 platform -- U-Boot 0.3.1 (Jul 7 2003 - 16:48:07) CPU: XPC850xxZTB at 50 MHz: 2 kB I-Cache 1 kB D-Cache ### No HW ID - assuming SVM SC8xx Watchdog enabled DRAM: 16 MB FLASH: 4 MB In: serial Out: serial Err: serial DOC: DiskOnChip 2000 @ 0x8000, 16 MB Net: SCC ETHERNET Welcome to U-Boot SVM port Type ? or help to get on-line help Hit any key to stop autoboot: 0 Did you try that? Might save you the admittedly somewhat cumbersome chroot mentioned before ... DOC read: device 0 offset 65536, size 983040 ... 983040 bytes read: OK ## Booting image at 0021 ... Image Name: Linux-2.4.4 Created: 2003-07-07 8:51:23 UTC Okay ... :) Setting clock (utc): Wed Dec 31 19:39:22 EST 1969 [ OK ] And it looks your computer needs more than one fix ... :) Best Regards Wolfgang -- Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/ http://profiles.yahoo.com/wolfgangpfeiffer Key ID: E3037113 http://keyserver.mine.nu/pks/lookup?search=0xE3037113fingerprint=on -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: no mic on ibook g4
At Fri, 05 May 2006 10:30:40 +0200, Magnus Rosenbaum wrote: Bin Zhang wrote: Which application you use for mic ? First I started alsamixer and switched Input So to Mic and turned up the volume for Monitor. Now I can hear it in the speakers if I knock on the mic. Works for me too, but I also have a PowerBook6,7 like Magnus. Please note that I run Gentoo Linux and I have this alsa version: ibookx ~ # alsactl -v alsactl version 1.0.10 You use the 'external' modules (alsa-driver in gentoo, I believe)? I use the alsa version that comes with the kernel 2.6.17-rc3. guava ~ # alsactl -v alsactl version 1.0.11 ruben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using kernel 2.6.17-rc2
On Thu, May 04, 2006 at 03:24:25PM +0200, Bin Zhang wrote: I have /dev/adb and /proc/sys/dev/mac_hid. I think it's a kernel config problem. Yes, it looks like it, I somehow did miss to configure: CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y Please note that CONFIG_MAC_EMUMOUSEBTN isn't strictly needed anymore, mouseemu (among others?) does the same thing in user space. I wonder why make oldconfig did not enable it, but I also just might have screwed it up myself. Nah, I had to double check the config myself the first time after switching to ARCH=powerpc. Seems some of the old settings did not get carried over. Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using kernel 2.6.17-rc2
Dear all, I am going to try 2.6.17-rc3 with oldconfig. But without any lack. My kernel panic after loading the usb module. I use iBook1.2G, could anyone useing the same ibook providing me the config file which have been tested and worked. I want to try new bcm43xx driver. Thanks. Tsai Dung-Bang Michael Schmitz 写道: On Thu, May 04, 2006 at 03:24:25PM +0200, Bin Zhang wrote: I have /dev/adb and /proc/sys/dev/mac_hid. I think it's a kernel config problem. Yes, it looks like it, I somehow did miss to configure: CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y Please note that CONFIG_MAC_EMUMOUSEBTN isn't strictly needed anymore, mouseemu (among others?) does the same thing in user space. I wonder why make oldconfig did not enable it, but I also just might have screwed it up myself. Nah, I had to double check the config myself the first time after switching to ARCH=powerpc. Seems some of the old settings did not get carried over. Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
re: Woody base wrecks video on Oldworld.
At Tue, 25 Apr 2006 01:44:16 -0800 I described a problem with video on the old PowerWave 604|120. All that was needed to solve this was a better monitor. For a reason I do not understand, the base installation needs a better monitor than the diskette based installer needs. Thanks,... Peter Easthope Desktops.OpenDoc http://carnot.pathology.ubc.ca/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
libc6
Finally I've managed to upgrade the PowerWave 604|120, Woody - Sarge - Etch ... more or less. The current problem is with libc6. It appears to be stuck at Sarge and is not fully configured. The report in running dselect is this. dpkg: error processing libc6 (--configure): Can anyone suggest how to resolve this or at least how I might find why it happens? Thanks,... Peter Easthope Desktops.OpenDoc http://carnot.pathology.ubc.ca/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
