Re: Booting doesn't: ?
On Wed, Mar 16, 2005 at 10:51:12PM +0100, Matthias Urlichs wrote: > I've been installing Sarge RC2 on my Hercules (3.01). RC2 will not install the right kernel since the package sync for RC3. This is a known but yet unfixed problem. Bastian -- The idea of male and female are universal constants. -- Kirk, "Metamorphosis", stardate 3219.8 signature.asc Description: Digital signature
RE: Booting doesn't: ?
> > > Ah. Obviously, the Debian Installer grabbed the wrong kernel. Hmm.. Aren't you given a kernel choice during the initial d-i run ? Anyway, When you boot the d-i base kernel, you will probably be running in 31 bit mode (which is a safe thing to do, since all post-IBM M/T 3090 systems can run 31 bit ESA).. At this point, it is almost impossible for the install procedure to know whether the system you are running on is or is not 64 bit capable.. (Machine Type doesn't count.. Since you can always pretend to be running on something else).. And even if the kernel issued the STFL (Store Facility List) or asked about the hardware via a Service Call and then provided the information to userland, it still wouldn't be reliable since some support platforms can be switched afterwards (like you just did !) > > > HTH, > > It does -- booting now. Thank you! > Good new :) --Ivan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Booting doesn't: ?
Hi,
Ivan Warren:
> Apparently, you are trying to IPL a z/Architecture kernel, but are
> running hercules in ESA/390 mode.
>
Ah. Obviously, the Debian Installer grabbed the wrong kernel.
> HTH,
It does -- booting now. Thank you!
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Booting doesn't: ?
On Wednesday 16 March 2005 22:51, Matthias Urlichs wrote: > Any idea what the problem is? Should I wait for RC3? I very much doubt that will fix it. Both RC2 and the current "pre RC3" install without problems on the self-compiled Hercules 3.02 I run on my Toshiba Satellite A40 (Pentium 4) laptop. I also successfully installed RC2 several times on a self-compiled Hercules 3.01. Cheers, FJP pgpbZwJKCTKwO.pgp Description: PGP signature
RE: Booting doesn't: ?
> CPU: SIGP CPU Set Architecture Mode PARM 0001 > HHCCP014I CPU: Operation exception CODE=0001 ILC=2 > PSW=00081000 80010016 INST=010E SAM64 > GR00= GR01=0002 GR02= GR03= > GR04= GR05= GR06= GR07= > GR08= GR09= GR10= GR11= > GR12= GR13=00010002 GR14= GR15= > HHCCP016I CPU: Program interrupt loop: PSW= Apparently, you are trying to IPL a z/Architecture kernel, but are running hercules in ESA/390 mode. You should specify "ESAME" in the architecture statement in the configuration file so as to allow the SIGP architecture switch to z/Architecture 64 bit mode to be successful... After that, z/Architecture instruction will be recognized as such, registers will be 64 bits, etc.. HTH, --Ivan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Booting doesn't: ?
Hi,
I've been installing Sarge RC2 on my Hercules (3.01).
Installation proceeds without a hitch, but when I try booting the new
DASD, this happens:
ipl 0120
HHCCP041I SYSCONS interface active
zIPL v1.3.1 interactive boot menu
0. default (debian)
1. debian
2. old
Please choose (default will boot in 10 seconds):
.1
Booting debian...
HHCCP042I SYSCONS interface inactive
CPU: SIGP CPU Set Architecture Mode PARM 0001
HHCCP014I CPU: Operation exception CODE=0001 ILC=2
PSW=00081000 80010016 INST=010E SAM64
GR00= GR01=0002 GR02= GR03=
GR04= GR05= GR06= GR07=
GR08= GR09= GR10= GR11=
GR12= GR13=00010002 GR14= GR15=
HHCCP016I CPU: Program interrupt loop: PSW=
Any idea what the problem is? Should I wait for RC3?
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
