Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Dennis Clarke 

On 12/3/18 4:10 PM, Fred wrote:

On 12/03/2018 12:29 PM, Dennis Clarke wrote:

On 12/3/18 2:18 PM, Fred wrote:

On 12/03/2018 10:14 AM, Phillip Stevens wrote:
Mach64 (PGX24 PGX64) driver is not working. Also Radeon (XVR-100) is 
not working.



Hi Dennis,

I thought the U5 was exactly like the U10 but in a pizza box. 


Close enough. However this is historical computing.
...

to use the Sun three button mouse on a PC.



I think you can use any mouse you want or even touch screens with
 Debian.

Dennis

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

On 12/03/2018 12:29 PM, Dennis Clarke wrote:

On 12/3/18 2:18 PM, Fred wrote:

On 12/03/2018 10:14 AM, Phillip Stevens wrote:
Mach64 (PGX24 PGX64) driver is not working. Also Radeon (XVR-100) is 
not working.

...


I don't know what Mach64 is.  The computer is a plain U5 with 512K 
ram. The only card plugged in is a USB card.  Should I remove the USB 
card?

Best regards,
Fred



There were very few options for the old sun ultra5. It was to be a sun
experiment into low cost PC-like dirt cheap slapped together low-end
workstations. So the graphics options were bottom dollar. The ultra10
had the benefit of actual OpenGL ready hardware but that is another
story.

So the ultra5 would ship with a 3D RAGE II M64 video graphics ability.
However you may also have the bone stock "SunVideo Plus" thing which I
can not recall what it was. There was also a thing called the pgx32 and
the pgx64.

You would need to boot the machine to the firmware ok prompt and look at
the device list to know for sure what you really have there.

Dennis



Hi Dennis,

I thought the U5 was exactly like the U10 but in a pizza box.  I also 
have a U10 that is running Solaris 2.6 that is used for all my business 
stuff.  I like Solaris 2.6/OpenWindows very much but the computer has 
been running essentially continuously for more than 20 years and I would 
like to upgrade to current Debian.  I would buy a x86 PC but they all 
use a beetle wing with wheel mouse which I despise.  I use a pcb layout 
program on the U10 that uses the mouse middle button.  It is not looking 
good for upgrading the Ultras and maybe it would be easier to find a way 
to use the Sun three button mouse on a PC.


Best regards,
Fred

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Dennis Clarke 

On 12/3/18 2:18 PM, Fred wrote:

On 12/03/2018 10:14 AM, Phillip Stevens wrote:
Mach64 (PGX24 PGX64) driver is not working. Also Radeon (XVR-100) is 
not working.

...


I don't know what Mach64 is.  The computer is a plain U5 with 512K ram. 
The only card plugged in is a USB card.  Should I remove the USB card?

Best regards,
Fred



There were very few options for the old sun ultra5. It was to be a sun
experiment into low cost PC-like dirt cheap slapped together low-end
workstations. So the graphics options were bottom dollar. The ultra10
had the benefit of actual OpenGL ready hardware but that is another
story.

So the ultra5 would ship with a 3D RAGE II M64 video graphics ability.
However you may also have the bone stock "SunVideo Plus" thing which I
can not recall what it was. There was also a thing called the pgx32 and
the pgx64.

You would need to boot the machine to the firmware ok prompt and look at
the device list to know for sure what you really have there.

Dennis

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

On 12/03/2018 12:17 PM, Gregor Riepl wrote:

Am I right to guess that you have an ATI Mac64 PCI card in the Ultra5? In that
case, the error below seems important:

[542823.455] (WW) Warning, couldn't open module mach64

[542823.456] (EE) Failed to load module "mach64" (module does not
exist, 0)

Did you install xserver-xorg-video-mach64 ?


I have read the link provided by Phillip Stevens and will try his 
suggestions.


Thanks for the help!

Best regards,
Fred

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Gregor Riepl 
> Am I right to guess that you have an ATI Mac64 PCI card in the Ultra5? In that
> case, the error below seems important:
> 
> [542823.455] (WW) Warning, couldn't open module mach64
> 
> [542823.456] (EE) Failed to load module "mach64" (module does not
> exist, 0)

Did you install xserver-xorg-video-mach64 ?

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

On 12/03/2018 10:14 AM, Phillip Stevens wrote:
Mach64 (PGX24 PGX64) driver is not working. Also Radeon (XVR-100) is 
not working.


My experience...

https://feilipu.me/2018/04/14/old-sunshine-migrating-ultra5-to-sparc64/

Phillip


On Tue., 4 Dec. 2018, 01:56 Fred  wrote:


Hello,

I installed debian 9.0 from the 4 April 18 netinstall .iso, also X
and
openbox.  When I run startx the xserver refuses the connection.  I
have
not been able to figure out why.  Here is the Xorg.0.log:

[542822.625]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[542822.628] Build Operating System: Linux 4.17.0-1-sparc64-smp
sparc64
Debian
[542822.629] Current Operating System: Linux peeves
4.15.0-2-sparc64 #1
Debian 4.15.11-1 (2018-03-20) sparc64
[542822.629] Kernel command line: root=/dev/sda2 ro
[542822.631] Build Date: 25 October 2018  06:15:23PM
[542822.632] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[542822.633] Current version of pixman: 0.34.0
[542822.634] Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
[542822.634] Markers: (--) probed, (**) from config file, (==)
default
setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[542822.639] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2
14:54:39 2018
[542822.676] (==) Using system config directory
"/usr/share/X11/xorg.conf.d"
[542822.765] (==) No Layout section.  Using the first Screen section.
[542822.766] (==) No screen section available. Using defaults.
[542822.766] (**) |-->Screen "Default Screen Section" (0)
[542822.767] (**) |   |-->Monitor ""
[542822.777] (==) No monitor specified for screen "Default Screen
Section".
 Using a default monitor configuration.
[542822.778] (==) Automatically adding devices
[542822.778] (==) Automatically enabling devices
[542822.779] (==) Automatically adding GPU devices
[542822.779] (==) Max clients allowed: 256, resource mask: 0x1f
[542822.830] (WW) The directory "/usr/share/fonts/X11/cyrillic"
does not
exist.
[542822.831] Entry deleted from font path.
[542822.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does
not
exist.
[542822.868] Entry deleted from font path.
[542822.884] (WW) The directory "/usr/share/fonts/X11/75dpi" does
not exist.
[542822.884] Entry deleted from font path.
[542822.885] (==) FontPath set to:
 /usr/share/fonts/X11/misc,
 /usr/share/fonts/X11/100dpi/:unscaled,
 /usr/share/fonts/X11/Type1,
 /usr/share/fonts/X11/100dpi,
 built-ins
[542822.885] (==) ModulePath set to "/usr/lib/xorg/modules"
[542822.885] (II) The server relies on udev to provide the list of
input
devices.
 If no devices become available, reconfigure udev or disable
AutoAddDevices.
[542822.885] (II) Loader magic: 0x1340bd0
[542822.886] (II) Module ABI versions:
[542822.886] X.Org ANSI C Emulation: 0.4
[542822.886] X.Org Video Driver: 24.0
[542822.886] X.Org XInput driver : 24.1
[542822.887] X.Org Server Extension : 10.0
[542822.897] (++) using VT number 1

[542822.923] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/_31424
[542822.954] (--) PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @
0xe100/16777216, 0xe200/4096
[542822.963] (II) LoadModule: "glx"
[542822.974] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[542823.422] (II) Module glx: vendor="X.Org Foundation"
[542823.423] compiled for 1.20.3, module version = 1.0.0
[542823.423] ABI class: X.Org Server Extension, version 10.0
[542823.426] (==) Matched ati as autoconfigured driver 0
[542823.426] (==) Matched modesetting as autoconfigured driver 1
[542823.427] (==) Matched fbdev as autoconfigured driver 2
[542823.427] (==) Matched sunffb as autoconfigured driver 3
[542823.427] (==) Assigned the driver to the xf86ConfigLayout
[542823.428] (II) LoadModule: "ati"
[542823.429] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[542823.450] (II) Module ati: vendor="X.Org Foundation"
[542823.451] compiled for 1.20.1, module version = 18.1.0
[542823.451] Module class: X.Org Video Driver
[542823.451] ABI class: X.Org Video Driver, version 24.0
[542823.452] (II) LoadModule: "mach64"
[542823.455] (WW) Warning, couldn't open module mach64
[542823.456] (EE) Failed to load module "mach64" (module does not
exist, 0)
[542823.456] (II) LoadModule: "modesetting"
[542823.457] (II) Loading
/usr/lib/xorg/modules/drivers/modesetting_drv.so
[542823.486] (II) Module modesetting: vendor="X.Org

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

On 12/03/2018 09:09 AM, Rick Leir wrote:

Fred,
Am I right to guess that you have an ATI Mac64 PCI card in the Ultra5? 
In that case, the error below seems important:


[542823.455] (WW) Warning, couldn't open module mach64

[542823.456] (EE) Failed to load module "mach64" (module does not
exist, 0)

HTH -- Rick

On December 3, 2018 10:25:31 AM EST, Fred  wrote:

On 12/03/2018 07:52 AM, Fred wrote:

Hello, I installed debian 9.0 from the 4 April 18 netinstall
.iso, also X and openbox. When I run startx the xserver
refuses the connection. I have not been able to figure out
why. Here is the Xorg.0.log: 


(Ultra 5)

[542822.625] X.Org X Server 1.20.3 X Protocol Version 11,
Revision 0 [542822.628] Build Operating System: Linux
4.17.0-1-sparc64-smp sparc64 Debian [542822.629] Current
Operating System: Linux peeves 4.15.0-2-sparc64 #1 Debian
4.15.11-1 (2018-03-20) sparc64 [542822.629] Kernel command
line: root=/dev/sda2 ro [542822.631] Build Date: 25 October
2018 06:15:23PM [542822.632] xorg-server 2:1.20.3-1
(https://www.debian.org/support)
 [542822.633] Current
version of pixman: 0.34.0 [542822.634] Before reporting
problems, check http://wiki.x.org to make sure that you have
the latest version. [542822.634] Markers: (--) probed, (**)
from config file, (==) default setting, (++) from command
line, (!!) notice, (II) informational, (WW) warning, (EE)
error, (NI) not implemented, (??) unknown. [542822.639] (==)
Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 14:54:39 2018
[542822.676] (==) Using system config directory
"/usr/share/X11/xorg.conf.d" [542822.765] (==) No Layout
section. Using the first Screen section. [542822.766] (==) No
screen section available. Using defaults. [542822.766] (**)
|-->Screen "Default Screen Section" (0) [542822.767] (**) |
|-->Monitor "" [542822.777] (==) No monitor
specified for screen "Default Screen Section". Using a default
monitor configuration. [542822.778] (==) Automatically adding
devices [542822.778] (==) Automatically enabling devices
[542822.779] (==) Automatically adding GPU devices
[542822.779] (==) Max clients allowed: 256, resource mask:
0x1f [542822.830] (WW) The directory
"/usr/share/fonts/X11/cyrillic" does not exist. [542822.831]
Entry deleted from font path. [542822.867] (WW) The directory
"/usr/share/fonts/X11/75dpi/" does not exist. [542822.868]
Entry deleted from font path. [542822.884] (WW) The directory
"/usr/share/fonts/X11/75dpi" does not exist. [542822.884]
Entry deleted from font path. [542822.885] (==) FontPath set
to: /usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi,
built-ins [542822.885] (==) ModulePath set to
"/usr/lib/xorg/modules" [542822.885] (II) The server relies on
udev to provide the list of input devices. If no devices
become available, reconfigure udev or disable AutoAddDevices.
[542822.885] (II) Loader magic: 0x1340bd0 [542822.886]
(II) Module ABI versions: [542822.886] X.Org ANSI C Emulation:
0.4 [542822.886] X.Org Video Driver: 24.0 [542822.886] X.Org
XInput driver : 24.1 [542822.887] X.Org Server Extension :
10.0 [542822.897] (++) using VT number 1 [542822.923] (II)
systemd-logind: took control of session
/org/freedesktop/login1/session/_31424 [542822.954] (--)
PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @
0xe100/16777216, 0xe200/4096 [542822.963] (II)
LoadModule: "glx" [542822.974] (II) Loading
/usr/lib/xorg/modules/extensions/libglx.so [542823.422] (II)
Module glx: vendor="X.Org Foundation" [542823.423] compiled
for 1.20.3, module version = 1.0.0 [542823.423] ABI class:
X.Org Server Extension, version 10.0 [542823.426] (==) Matched
ati as autoconfigured driver 0 [542823.426] (==) Matched
modesetting as autoconfigured driver 1 [542823.427] (==)
Matched fbdev as autoconfigured driver 2 [542823.427] (==)
Matched sunffb as autoconfigured driver 3 [542823.427] (==)
Assigned the driver to the xf86ConfigLayout [542823.428] (II)
LoadModule: "ati" [542823.429] (II) Loading
/usr/lib/xorg/modules/drivers/ati_drv.so [542823.450] (II)
Module ati: vendor="X.Org Foundation" [542823.451] compiled
for 1.20.1, module version = 18.1.0 [542823.451] Module class:
X.Org Video Driver [542823.451] ABI class: X.Org Video Driver,
version 24.0 [542823.452] (II) LoadModule: "mach64"
[542823.455] (WW) Warning, couldn't open module mach64
[542823.456] (EE) Failed

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Phillip Stevens 
Mach64 (PGX24 PGX64) driver is not working. Also Radeon (XVR-100) is not
working.

My experience...

https://feilipu.me/2018/04/14/old-sunshine-migrating-ultra5-to-sparc64/

Phillip


On Tue., 4 Dec. 2018, 01:56 Fred  Hello,
>
> I installed debian 9.0 from the 4 April 18 netinstall .iso, also X and
> openbox.  When I run startx the xserver refuses the connection.  I have
> not been able to figure out why.  Here is the Xorg.0.log:
>
> [542822.625]
> X.Org X Server 1.20.3
> X Protocol Version 11, Revision 0
> [542822.628] Build Operating System: Linux 4.17.0-1-sparc64-smp sparc64
> Debian
> [542822.629] Current Operating System: Linux peeves 4.15.0-2-sparc64 #1
> Debian 4.15.11-1 (2018-03-20) sparc64
> [542822.629] Kernel command line: root=/dev/sda2 ro
> [542822.631] Build Date: 25 October 2018  06:15:23PM
> [542822.632] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
> [542822.633] Current version of pixman: 0.34.0
> [542822.634] Before reporting problems, check http://wiki.x.org
>  to make sure that you have the latest version.
> [542822.634] Markers: (--) probed, (**) from config file, (==) default
> setting,
>  (++) from command line, (!!) notice, (II) informational,
>  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [542822.639] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2
> 14:54:39 2018
> [542822.676] (==) Using system config directory
> "/usr/share/X11/xorg.conf.d"
> [542822.765] (==) No Layout section.  Using the first Screen section.
> [542822.766] (==) No screen section available. Using defaults.
> [542822.766] (**) |-->Screen "Default Screen Section" (0)
> [542822.767] (**) |   |-->Monitor ""
> [542822.777] (==) No monitor specified for screen "Default Screen Section".
>  Using a default monitor configuration.
> [542822.778] (==) Automatically adding devices
> [542822.778] (==) Automatically enabling devices
> [542822.779] (==) Automatically adding GPU devices
> [542822.779] (==) Max clients allowed: 256, resource mask: 0x1f
> [542822.830] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
> exist.
> [542822.831] Entry deleted from font path.
> [542822.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not
> exist.
> [542822.868] Entry deleted from font path.
> [542822.884] (WW) The directory "/usr/share/fonts/X11/75dpi" does not
> exist.
> [542822.884] Entry deleted from font path.
> [542822.885] (==) FontPath set to:
>  /usr/share/fonts/X11/misc,
>  /usr/share/fonts/X11/100dpi/:unscaled,
>  /usr/share/fonts/X11/Type1,
>  /usr/share/fonts/X11/100dpi,
>  built-ins
> [542822.885] (==) ModulePath set to "/usr/lib/xorg/modules"
> [542822.885] (II) The server relies on udev to provide the list of input
> devices.
>  If no devices become available, reconfigure udev or disable
> AutoAddDevices.
> [542822.885] (II) Loader magic: 0x1340bd0
> [542822.886] (II) Module ABI versions:
> [542822.886] X.Org ANSI C Emulation: 0.4
> [542822.886] X.Org Video Driver: 24.0
> [542822.886] X.Org XInput driver : 24.1
> [542822.887] X.Org Server Extension : 10.0
> [542822.897] (++) using VT number 1
>
> [542822.923] (II) systemd-logind: took control of session
> /org/freedesktop/login1/session/_31424
> [542822.954] (--) PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @
> 0xe100/16777216, 0xe200/4096
> [542822.963] (II) LoadModule: "glx"
> [542822.974] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [542823.422] (II) Module glx: vendor="X.Org Foundation"
> [542823.423] compiled for 1.20.3, module version = 1.0.0
> [542823.423] ABI class: X.Org Server Extension, version 10.0
> [542823.426] (==) Matched ati as autoconfigured driver 0
> [542823.426] (==) Matched modesetting as autoconfigured driver 1
> [542823.427] (==) Matched fbdev as autoconfigured driver 2
> [542823.427] (==) Matched sunffb as autoconfigured driver 3
> [542823.427] (==) Assigned the driver to the xf86ConfigLayout
> [542823.428] (II) LoadModule: "ati"
> [542823.429] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
> [542823.450] (II) Module ati: vendor="X.Org Foundation"
> [542823.451] compiled for 1.20.1, module version = 18.1.0
> [542823.451] Module class: X.Org Video Driver
> [542823.451] ABI class: X.Org Video Driver, version 24.0
> [542823.452] (II) LoadModule: "mach64"
> [542823.455] (WW) Warning, couldn't open module mach64
> [542823.456] (EE) Failed to load module "mach64" (module does not exist, 0)
> [542823.456] (II) LoadModule: "modesetting"
> [542823.457] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [542823.486] (II) Module modesetting: vendor="X.Org Foundation"
> [542823.486] compiled for 1.20.3, module version = 1.20.3
> [542823.487] Module class: X.Org Video Driver
> [542823.487] ABI class: X.Org Video Driver, version 24.0
> [542823.487] (II) LoadModule: "fbdev"
> [542823.489] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Rick Leir 
Fred,
Am I right to guess that you have an ATI Mac64 PCI card in the Ultra5? In that 
case, the error below seems important:

[542823.455] (WW) Warning, couldn't open module mach64

[542823.456] (EE) Failed to load module "mach64" (module does not 
exist, 0)

HTH -- Rick

On December 3, 2018 10:25:31 AM EST, Fred  wrote:
>On 12/03/2018 07:52 AM, Fred wrote:
>> Hello,
>>
>> I installed debian 9.0 from the 4 April 18 netinstall .iso, also X
>and 
>> openbox.  When I run startx the xserver refuses the connection.  I 
>> have not been able to figure out why.  Here is the Xorg.0.log:
>>
>(Ultra 5)
>
>> [542822.625]
>> X.Org X Server 1.20.3
>> X Protocol Version 11, Revision 0
>> [542822.628] Build Operating System: Linux 4.17.0-1-sparc64-smp 
>> sparc64 Debian
>> [542822.629] Current Operating System: Linux peeves 4.15.0-2-sparc64 
>> #1 Debian 4.15.11-1 (2018-03-20) sparc64
>> [542822.629] Kernel command line: root=/dev/sda2 ro
>> [542822.631] Build Date: 25 October 2018  06:15:23PM
>> [542822.632] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
>> [542822.633] Current version of pixman: 0.34.0
>> [542822.634] Before reporting problems, check http://wiki.x.org
>> to make sure that you have the latest version.
>> [542822.634] Markers: (--) probed, (**) from config file, (==)
>default 
>> setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> [542822.639] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 
>> 14:54:39 2018
>> [542822.676] (==) Using system config directory 
>> "/usr/share/X11/xorg.conf.d"
>> [542822.765] (==) No Layout section.  Using the first Screen section.
>> [542822.766] (==) No screen section available. Using defaults.
>> [542822.766] (**) |-->Screen "Default Screen Section" (0)
>> [542822.767] (**) |   |-->Monitor ""
>> [542822.777] (==) No monitor specified for screen "Default Screen 
>> Section".
>> Using a default monitor configuration.
>> [542822.778] (==) Automatically adding devices
>> [542822.778] (==) Automatically enabling devices
>> [542822.779] (==) Automatically adding GPU devices
>> [542822.779] (==) Max clients allowed: 256, resource mask: 0x1f
>> [542822.830] (WW) The directory "/usr/share/fonts/X11/cyrillic" does 
>> not exist.
>> [542822.831] Entry deleted from font path.
>> [542822.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does
>not 
>> exist.
>> [542822.868] Entry deleted from font path.
>> [542822.884] (WW) The directory "/usr/share/fonts/X11/75dpi" does not
>
>> exist.
>> [542822.884] Entry deleted from font path.
>> [542822.885] (==) FontPath set to:
>> /usr/share/fonts/X11/misc,
>> /usr/share/fonts/X11/100dpi/:unscaled,
>> /usr/share/fonts/X11/Type1,
>> /usr/share/fonts/X11/100dpi,
>> built-ins
>> [542822.885] (==) ModulePath set to "/usr/lib/xorg/modules"
>> [542822.885] (II) The server relies on udev to provide the list of 
>> input devices.
>> If no devices become available, reconfigure udev or disable 
>> AutoAddDevices.
>> [542822.885] (II) Loader magic: 0x1340bd0
>> [542822.886] (II) Module ABI versions:
>> [542822.886] X.Org ANSI C Emulation: 0.4
>> [542822.886] X.Org Video Driver: 24.0
>> [542822.886] X.Org XInput driver : 24.1
>> [542822.887] X.Org Server Extension : 10.0
>> [542822.897] (++) using VT number 1
>>
>> [542822.923] (II) systemd-logind: took control of session 
>> /org/freedesktop/login1/session/_31424
>> [542822.954] (--) PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @ 
>> 0xe100/16777216, 0xe200/4096
>> [542822.963] (II) LoadModule: "glx"
>> [542822.974] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>> [542823.422] (II) Module glx: vendor="X.Org Foundation"
>> [542823.423] compiled for 1.20.3, module version = 1.0.0
>> [542823.423] ABI class: X.Org Server Extension, version 10.0
>> [542823.426] (==) Matched ati as autoconfigured driver 0
>> [542823.426] (==) Matched modesetting as autoconfigured driver 1
>> [542823.427] (==) Matched fbdev as autoconfigured driver 2
>> [542823.427] (==) Matched sunffb as autoconfigured driver 3
>> [542823.427] (==) Assigned the driver to the xf86ConfigLayout
>> [542823.428] (II) LoadModule: "ati"
>> [542823.429] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
>> [542823.450] (II) Module ati: vendor="X.Org Foundation"
>> [542823.451] compiled for 1.20.1, module version = 18.1.0
>> [542823.451] Module class: X.Org Video Driver
>> [542823.451] ABI class: X.Org Video Driver, version 24.0
>> [542823.452] (II) LoadModule: "mach64"
>> [542823.455] (WW) Warning, couldn't open module mach64
>> [542823.456] (EE) Failed to load module "mach64" (module does not 
>> exist, 0)
>> [542823.456] (II) LoadModule: "modesetting"
>> [542823.457] (II) Loading 
>> /usr/lib/xorg/modules/drivers/modesetting_drv.so
>> [542823.486] (II) Module modesetting: vendor="X.Org Foundation"
>> [542823.486] compiled

Re: xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

On 12/03/2018 07:52 AM, Fred wrote:

Hello,

I installed debian 9.0 from the 4 April 18 netinstall .iso, also X and 
openbox.  When I run startx the xserver refuses the connection.  I 
have not been able to figure out why.  Here is the Xorg.0.log:



(Ultra 5)


[542822.625]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[542822.628] Build Operating System: Linux 4.17.0-1-sparc64-smp 
sparc64 Debian
[542822.629] Current Operating System: Linux peeves 4.15.0-2-sparc64 
#1 Debian 4.15.11-1 (2018-03-20) sparc64

[542822.629] Kernel command line: root=/dev/sda2 ro
[542822.631] Build Date: 25 October 2018  06:15:23PM
[542822.632] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[542822.633] Current version of pixman: 0.34.0
[542822.634] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[542822.634] Markers: (--) probed, (**) from config file, (==) default 
setting,

(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[542822.639] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 
14:54:39 2018
[542822.676] (==) Using system config directory 
"/usr/share/X11/xorg.conf.d"

[542822.765] (==) No Layout section.  Using the first Screen section.
[542822.766] (==) No screen section available. Using defaults.
[542822.766] (**) |-->Screen "Default Screen Section" (0)
[542822.767] (**) |   |-->Monitor ""
[542822.777] (==) No monitor specified for screen "Default Screen 
Section".

Using a default monitor configuration.
[542822.778] (==) Automatically adding devices
[542822.778] (==) Automatically enabling devices
[542822.779] (==) Automatically adding GPU devices
[542822.779] (==) Max clients allowed: 256, resource mask: 0x1f
[542822.830] (WW) The directory "/usr/share/fonts/X11/cyrillic" does 
not exist.

[542822.831] Entry deleted from font path.
[542822.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not 
exist.

[542822.868] Entry deleted from font path.
[542822.884] (WW) The directory "/usr/share/fonts/X11/75dpi" does not 
exist.

[542822.884] Entry deleted from font path.
[542822.885] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[542822.885] (==) ModulePath set to "/usr/lib/xorg/modules"
[542822.885] (II) The server relies on udev to provide the list of 
input devices.
If no devices become available, reconfigure udev or disable 
AutoAddDevices.

[542822.885] (II) Loader magic: 0x1340bd0
[542822.886] (II) Module ABI versions:
[542822.886] X.Org ANSI C Emulation: 0.4
[542822.886] X.Org Video Driver: 24.0
[542822.886] X.Org XInput driver : 24.1
[542822.887] X.Org Server Extension : 10.0
[542822.897] (++) using VT number 1

[542822.923] (II) systemd-logind: took control of session 
/org/freedesktop/login1/session/_31424
[542822.954] (--) PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @ 
0xe100/16777216, 0xe200/4096

[542822.963] (II) LoadModule: "glx"
[542822.974] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[542823.422] (II) Module glx: vendor="X.Org Foundation"
[542823.423] compiled for 1.20.3, module version = 1.0.0
[542823.423] ABI class: X.Org Server Extension, version 10.0
[542823.426] (==) Matched ati as autoconfigured driver 0
[542823.426] (==) Matched modesetting as autoconfigured driver 1
[542823.427] (==) Matched fbdev as autoconfigured driver 2
[542823.427] (==) Matched sunffb as autoconfigured driver 3
[542823.427] (==) Assigned the driver to the xf86ConfigLayout
[542823.428] (II) LoadModule: "ati"
[542823.429] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[542823.450] (II) Module ati: vendor="X.Org Foundation"
[542823.451] compiled for 1.20.1, module version = 18.1.0
[542823.451] Module class: X.Org Video Driver
[542823.451] ABI class: X.Org Video Driver, version 24.0
[542823.452] (II) LoadModule: "mach64"
[542823.455] (WW) Warning, couldn't open module mach64
[542823.456] (EE) Failed to load module "mach64" (module does not 
exist, 0)

[542823.456] (II) LoadModule: "modesetting"
[542823.457] (II) Loading 
/usr/lib/xorg/modules/drivers/modesetting_drv.so

[542823.486] (II) Module modesetting: vendor="X.Org Foundation"
[542823.486] compiled for 1.20.3, module version = 1.20.3
[542823.487] Module class: X.Org Video Driver
[542823.487] ABI class: X.Org Video Driver, version 24.0
[542823.487] (II) LoadModule: "fbdev"
[542823.489] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[542823.494] (II) Module fbdev: vendor="X.Org Foundation"
[542823.494] compiled for 1.20.0, module version = 0.5.0
[542823.495] Module class: X.Org Video Driver
[542823.495] ABI class: X.Org Video Driver, version 24.0
[542823.495] (II) LoadModule: "sunffb"
[542823.498] (WW) Warning, couldn't open module sunffb
[542823.498] (EE)

xserver problem 9.0-sparc64 netinst

2018-12-03 Thread Fred 

Hello,

I installed debian 9.0 from the 4 April 18 netinstall .iso, also X and 
openbox.  When I run startx the xserver refuses the connection.  I have 
not been able to figure out why.  Here is the Xorg.0.log:


[542822.625]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[542822.628] Build Operating System: Linux 4.17.0-1-sparc64-smp sparc64 
Debian
[542822.629] Current Operating System: Linux peeves 4.15.0-2-sparc64 #1 
Debian 4.15.11-1 (2018-03-20) sparc64

[542822.629] Kernel command line: root=/dev/sda2 ro
[542822.631] Build Date: 25 October 2018  06:15:23PM
[542822.632] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[542822.633] Current version of pixman: 0.34.0
[542822.634] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[542822.634] Markers: (--) probed, (**) from config file, (==) default 
setting,

(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[542822.639] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 
14:54:39 2018

[542822.676] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[542822.765] (==) No Layout section.  Using the first Screen section.
[542822.766] (==) No screen section available. Using defaults.
[542822.766] (**) |-->Screen "Default Screen Section" (0)
[542822.767] (**) |   |-->Monitor ""
[542822.777] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[542822.778] (==) Automatically adding devices
[542822.778] (==) Automatically enabling devices
[542822.779] (==) Automatically adding GPU devices
[542822.779] (==) Max clients allowed: 256, resource mask: 0x1f
[542822.830] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not 
exist.

[542822.831] Entry deleted from font path.
[542822.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not 
exist.

[542822.868] Entry deleted from font path.
[542822.884] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[542822.884] Entry deleted from font path.
[542822.885] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[542822.885] (==) ModulePath set to "/usr/lib/xorg/modules"
[542822.885] (II) The server relies on udev to provide the list of input 
devices.
If no devices become available, reconfigure udev or disable 
AutoAddDevices.

[542822.885] (II) Loader magic: 0x1340bd0
[542822.886] (II) Module ABI versions:
[542822.886] X.Org ANSI C Emulation: 0.4
[542822.886] X.Org Video Driver: 24.0
[542822.886] X.Org XInput driver : 24.1
[542822.887] X.Org Server Extension : 10.0
[542822.897] (++) using VT number 1

[542822.923] (II) systemd-logind: took control of session 
/org/freedesktop/login1/session/_31424
[542822.954] (--) PCI:*(1@0:2:0) 1002:4750:: rev 92, Mem @ 
0xe100/16777216, 0xe200/4096

[542822.963] (II) LoadModule: "glx"
[542822.974] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[542823.422] (II) Module glx: vendor="X.Org Foundation"
[542823.423] compiled for 1.20.3, module version = 1.0.0
[542823.423] ABI class: X.Org Server Extension, version 10.0
[542823.426] (==) Matched ati as autoconfigured driver 0
[542823.426] (==) Matched modesetting as autoconfigured driver 1
[542823.427] (==) Matched fbdev as autoconfigured driver 2
[542823.427] (==) Matched sunffb as autoconfigured driver 3
[542823.427] (==) Assigned the driver to the xf86ConfigLayout
[542823.428] (II) LoadModule: "ati"
[542823.429] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[542823.450] (II) Module ati: vendor="X.Org Foundation"
[542823.451] compiled for 1.20.1, module version = 18.1.0
[542823.451] Module class: X.Org Video Driver
[542823.451] ABI class: X.Org Video Driver, version 24.0
[542823.452] (II) LoadModule: "mach64"
[542823.455] (WW) Warning, couldn't open module mach64
[542823.456] (EE) Failed to load module "mach64" (module does not exist, 0)
[542823.456] (II) LoadModule: "modesetting"
[542823.457] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[542823.486] (II) Module modesetting: vendor="X.Org Foundation"
[542823.486] compiled for 1.20.3, module version = 1.20.3
[542823.487] Module class: X.Org Video Driver
[542823.487] ABI class: X.Org Video Driver, version 24.0
[542823.487] (II) LoadModule: "fbdev"
[542823.489] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[542823.494] (II) Module fbdev: vendor="X.Org Foundation"
[542823.494] compiled for 1.20.0, module version = 0.5.0
[542823.495] Module class: X.Org Video Driver
[542823.495] ABI class: X.Org Video Driver, version 24.0
[542823.495] (II) LoadModule: "sunffb"
[542823.498] (WW) Warning, couldn't open module sunffb
[542823.498] (EE) Failed to load module "sunffb" (module does not exist, 0)