[Debian] Adaptec 2940 U2W-Controller
Hallo, ich versuche auf einem Rechner mit dem Adaptec 2940 Debian 2.2r3 zu installieren. Ich habe schon ein paar boot-Parameter ausprobiert, aber der Installationsvorgang bleibt immer an der selben Stelle hängen. [...] (scsi0) Adaptec AHA-294X Ultra2 SCSI host adapter found at PCI 0/15/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequenzer code... 398 instructions downloaded scsi: fdomain Detection failed (no card) NCR53c406a: no aviable ports found sym53c416.c: Version 1.0.0 An der Stelle kann ich meinen Rechner nur mit Reset neu starten. Ich habe beim Suchen nach diesem Problem leider nur gefunden, das es schon in Debian 2.1 aufgetreten ist und man bis 2.2 warten soll, da wird es nicht mehr auftreten. Zu dumm, das meine Installations-CD das nicht gelesen hat;-) Hat jemand das gleiche Problem und weiss, wie ich es lösen kann? Vielen Dank im Voraus, Andreas -- --- Um sich aus der Liste auszutragen schicken Sie bitte eine E-Mail an [EMAIL PROTECTED] die im Subject unsubscribe deine_email_adresse enthaelt. Bei Problemen bitte eine Mail an: [EMAIL PROTECTED] --- 946 eingetragene Mitglieder in dieser Liste.
Re: [Debian] Adaptec 2940 U2W-Controller
Andreas Ronneberg wrote: ich versuche auf einem Rechner mit dem Adaptec 2940 Debian 2.2r3 zu installieren. Ich habe schon ein paar boot-Parameter ausprobiert, aber der Installationsvorgang bleibt immer an der selben Stelle hängen. aus ftp://ftp.de.debian.org/pub/debian/dists/Debian2.2r3/main/disks-i386/current/images-1.44/compact/README.txt: The compact flavor contains a thinner, trimmer, stripped down kernel for the boot floppies. It is geared towards modern PCs. [snip] It includes support for PCI SCSI and IDE controllers, some PCI RAID controllers (including DAC960 and SMART2) and some network controllers. [snip] See the file 'kernel-config' for the complete list of devices included in this flavor. aus ftp://ftp.de.debian.org/pub/debian/dists/Debian2.2r3/main/disks-i386/current/images-1.44/compact/kernel-config: CONFIG_SCSI_AIC7XXX=y aus /usr/src/kernel-source-2.2.19-pre/Documentation/Configure.help: CONFIG_SCSI_AIC7XXX This is support for the various aic7xxx based Adaptec SCSI controllers. These include the 274x EISA cards; 284x VLB cards; 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and motherboard based SCSI controllers from Adaptec. It does not support [snip] hm? -- hafi -- --- Um sich aus der Liste auszutragen schicken Sie bitte eine E-Mail an [EMAIL PROTECTED] die im Subject unsubscribe deine_email_adresse enthaelt. Bei Problemen bitte eine Mail an: [EMAIL PROTECTED] --- 946 eingetragene Mitglieder in dieser Liste.
Re: [Debian] Adaptec 2940 U2W-Controller
Hartmut Figge wrote: aus ftp://ftp.de.debian.org/pub/debian/dists/Debian2.2r3/main/disks-i386/current/images-1.44/compact/README.txt: The compact flavor contains a thinner, trimmer, stripped down kernel for the boot floppies. It is geared towards modern PCs. [...] CONFIG_SCSI_AIC7XXX This is support for the various aic7xxx based Adaptec SCSI controllers. These include the 274x EISA cards; 284x VLB cards; 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and motherboard based SCSI controllers from Adaptec. It does not support Ich habe jetzt alle Bootdisketten-Images ausprobiert, leider besteht das Problem immernoch. Mich wundert nur, das noch der Rechner erst bei sym53c416.c: Version 1.0.0 hängen bleibt. Kann man bei der Installation verhindern, das alle Module für die SCSI-Adapter durchprobiert werden, um zu sehen, ob vielleicht das Symbios-Modul das Problem verursacht? Das aic7xxx-Modul könnte man ja während der Installation laden. Andi -- --- Um sich aus der Liste auszutragen schicken Sie bitte eine E-Mail an [EMAIL PROTECTED] die im Subject unsubscribe deine_email_adresse enthaelt. Bei Problemen bitte eine Mail an: [EMAIL PROTECTED] --- 948 eingetragene Mitglieder in dieser Liste.