pb install serveur graphique sur Debian Woody 3.0r2
Bonjour, J'ai un souci pour installer le serveur graphique XFree86 Version 4.1.0.1 sur une Debian 3.0r2 (woody) et je trouve pas sur le web la solution... Ma carte graphique est une ATI rage pro (cf la sortie de lspci ci- dessous) A la fin de l'install et de la configuration de XFree86, lorsque je lance startx... Ca plante !!! Apparemment le driver pour la carte graphique n'est pas le bon, j'utilise le r128 je vois pas comment faire autrement. Je vous donne ci dessous la sortie du fichier XFree86.0.log désolé pour la longueur du message... Merci d'avance sortie du lspci : 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) 00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) 00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) 00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 01) 00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 81) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF 02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) 02:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 46) sortie du XFree86.0.log : This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.20-8um i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon May 3 15:16:28 2004 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor iiyama vision master 405 (**) | |--Device ati rage 128 pro (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout fr (**) XKB: layout: fr (==) Keyboard: CustomKeycode disabled (**) |--Input Device Configured Mouse (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unsca led,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 11 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 11 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,5032 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,5032 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,5032 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 8086,5032 rev 01 class
Re: pb install serveur graphique sur Debian Woody 3.0r2
On Mon, 2004-05-03 at 14:35, Guillaume Rolland wrote: Bonjour, J'ai un souci pour installer le serveur graphique XFree86 Version 4.1.0.1 sur une Debian 3.0r2 (woody) et je trouve pas sur le web la solution... Ma carte graphique est une ATI rage pro (cf la sortie de lspci ci- dessous) A la fin de l'install et de la configuration de XFree86, lorsque je lance startx... Ca plante !!! Apparemment le driver pour la carte graphique n'est pas le bon, j'utilise le r128 je vois pas comment faire autrement. Je vous donne ci dessous la sortie du fichier XFree86.0.log désolé pour la longueur du message... Merci d'avance sortie du lspci : 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) 00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) 00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) 00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 01) 00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 81) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF 02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) 02:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 46) sortie du XFree86.0.log : This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.20-8um i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon May 3 15:16:28 2004 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor iiyama vision master 405 (**) | |--Device ati rage 128 pro (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout fr (**) XKB: layout: fr (==) Keyboard: CustomKeycode disabled (**) |--Input Device Configured Mouse (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unsca led,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 11 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 11 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,5032 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,5032 rev 01 class 0c,03,00 hdr 00
