Re: [DEBIAN-BR] halt vs shutdown

2021-09-14 Por tôpico Leandro Guimarães Faria Corcete DUTRA
Le mardi 14 septembre 2021 à 00:45 -0300, Gilberto F da Silva a écrit :
> Estou surpreso commuma coisa. Achava que essas coisas de linha de
> comando eram iguais em todas as distribuções.

Na verdade em geral é, mas o Slackware em particular segue o SysV mais
de perto, enquanto as outras são mais GNU e Posix.


-- 
Leandro Guimarães Faria Corcete DUTRA 



Re: [DEBIAN-BR] halt vs shutdown

2021-09-14 Por tôpico Gilberto F da Silva
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On Mon, Sep 13, 2021 at 05:52:15PM -0300, Leandro Guimarães Faria Corcete DUTRA 
wrote:
Le lundi 13 septembre 2021 à 17:20 -0300, Gilberto F da Silva a écrit :
> On Sep 10, 2021 12:34:30PM −3, Leandro Guimarães Faria Corcete DUTRA:
> 10 set 2021 9:40 −3, Gilberto F da Silva:
> > No Slackware o halt desliga a máquina.
> 
> man halt:
> 
> ‘Note that on many SysV systems halt used to be synonymous
> to poweroff, i.e. both commands would equally result in
> powering the machine off. systemd is more accurate here,
> and halt results in halting the machine only (leaving
> power on)

Isso fala que *era* o caso em alguns SysV, mas que não é o caso no
systemd, e nada fala sobre o Slackware.



>> ¿Que diz o man do Slackware?
>
> NOTES
>
> Under older sysvinit releases, reboot and halt should never be
> called directly. From release 2.74 on halt and reboot invoke
> shutdown(8) if the system is not in runlevel 0 or 6. This means
> that if halt or reboot cannot find out the current runlevel (for
> example, when /var/run/utmp hasn't been initialized correctly and
> /var/run/runlevel does not exist) shutdown will be called, which
> might not be what you want.  Use the -f flag if you want to do a
> hard halt or reboot.
> 
> The -h flag puts all hard disks in standby mode just before halt
> or power-off. Right now this is only implemented for IDE drives. A
> side effect of putting the drive in stand-by mode is that the
> write cache on the disk is flushed. This is important for IDE
> drives, since the kernel doesn't flush the write cache itself
> before power-off.

Ainda não está claro.  Se isso é parte do man halt do Slackware, diz
apenas que chama o shutdown em algumas circunstâncias, mas não diz
com que parâmetros exatamente.  De qualquer modo, é irrelevante aqui
nesta lista de Debian…

  Estou surpreso commuma coisa. Achava que essas coisas de linha de comando 
eram iguais em todas as distribuções.
  
- -- 

Stela dato:2.459.471,655  Loka tempo:2021-09-14 00:43:54 Mardo
- -==-
"Eu às vezes me pergunto como as igrejas evangélicas conseguem fazer 
lavagem cerebral em milhares de pessoas.  Os fiéis ficam 
completamente obcecados  e não percebem que estão deixando os 
pastores cada vez mais ricos às custas desse mensalinho do demônio.  
Eu não acredito absolutamente naquilo .  Fé a gente tem sem explicar. 
 O que eles fazem são promessas vazias, agem como políticos."
-- Hebe Camargo - Veja 1926
-BEGIN PGP SIGNATURE-
Comment: +-+
Comment: !   Gilberto F da Silva - ICQ 136.782.571 !
Comment: +-+

iF0EARECAB0WIQR6BybJIKBLy3+8xXcnG6Ba0yEbDgUCYUAa5wAKCRAnG6Ba0yEb
Dih9AKCVlfgtNcD+9wbMobImwNXXV7N4RgCgvJnamg2LJqt1sDnpYm1B5vIWa6s=
=TbLd
-END PGP SIGNATURE-



Re: [DEBIAN-BR] halt vs shutdown

2021-09-13 Por tôpico Leandro Guimarães Faria Corcete DUTRA
Le lundi 13 septembre 2021 à 17:20 -0300, Gilberto F da Silva a écrit :
> On Sep 10, 2021 12:34:30PM −3, Leandro Guimarães Faria Corcete DUTRA:
> 10 set 2021 9:40 −3, Gilberto F da Silva:
> > No Slackware o halt desliga a máquina.
> 
> man halt:
> 
> ‘Note that on many SysV systems halt used to be synonymous
> to poweroff, i.e. both commands would equally result in
> powering the machine off. systemd is more accurate here,
> and halt results in halting the machine only (leaving
> power on)

Isso fala que *era* o caso em alguns SysV, mas que não é o caso no
systemd, e nada fala sobre o Slackware.



>> ¿Que diz o man do Slackware?
>
> NOTES
>
> Under older sysvinit releases, reboot and halt should never be
> called directly. From release 2.74 on halt and reboot invoke
> shutdown(8) if the system is not in runlevel 0 or 6. This means
> that if halt or reboot cannot find out the current runlevel (for
> example, when /var/run/utmp hasn't been initialized correctly and
> /var/run/runlevel does not exist) shutdown will be called, which
> might not be what you want.  Use the -f flag if you want to do a
> hard halt or reboot.
> 
> The -h flag puts all hard disks in standby mode just before halt
> or power-off. Right now this is only implemented for IDE drives. A
> side effect of putting the drive in stand-by mode is that the
> write cache on the disk is flushed. This is important for IDE
> drives, since the kernel doesn't flush the write cache itself
> before power-off.

Ainda não está claro.  Se isso é parte do man halt do Slackware, diz
apenas que chama o shutdown em algumas circunstâncias, mas não diz
com que parâmetros exatamente.  De qualquer modo, é irrelevante aqui
nesta lista de Debian…


-- 
/¯\
\ / +55 (61) 3546 7191 xmpp:leand...@jabber.org
 X  +55 (61) 99302 2691
/ \ BRAZIL GMT−3 https://useplaintext.email/#why-plaintext




Re: [DEBIAN-BR] halt vs shutdown

2021-09-10 Por tôpico Leandro Guimarães Faria Corcete DUTRA
10 set 2021 9:40 −3, Gilberto F da Silva:
> No Slackware o halt desliga a máquina.

man halt:

‘Note that on many SysV systems halt used to be synonymous
to poweroff, i.e. both commands would equally result in
powering the machine off. systemd is more accurate here, and
halt results in halting the machine only (leaving power on),
and poweroff is required to actually power it off.’


¿Que diz o man do Slackware?


-- 
/¯\
\ / +55 (61) 3546 7191   xmpp:leand...@jabber.org
 X  +55 (61) 99302 2691
/ \ BRAZIL GMT−3 https://useplaintext.email/#why-plaintext




[DEBIAN-BR] halt vs shutdown

2021-09-10 Por tôpico Gilberto F da Silva
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On Wed, Sep 08, 2021 at 05:33:02PM -0300, Guimarães Faria Corcete DUTRA, 
Leandro wrote:
>Il giorno mer 8 set 2021 alle ore 16:03 Vitor Hugo
> ha scritto:
>>
>> Boa tarde, o halt seria hibernar a maquina?
>
>Não.  Como disse, é a mesma coisa que os outros, mas sem desligar a
>máquina.  Ou seja, encerra o sistema operacional, mas deixa a máquina
>ligada.  Não vejo muita utilidade, na minha ignorância.

  Shutdown é uma palavra muito comprida para quando você
  morrendo de sono e só quer desligar a máquina para ir
  dormir. No Slackware o halt desliga a máquina.
- -- 

Stela dato:2.459.468,023  Loka tempo:2021-09-10 09:33:35 Vendredo 
- -==-
"O livre arbítrio na realidade não é livre, pois é uma coação você só 
pode escolher dois caminhos, um é bom e outro é ruim. Livre arbítrio 
mesmo é poder escolher muitos caminhos, todos bons".
-- Perrone
-BEGIN PGP SIGNATURE-
Comment: +-+
Comment: !   Gilberto F da Silva - ICQ 136.782.571 !
Comment: +-+

iF0EARECAB0WIQR6BybJIKBLy3+8xXcnG6Ba0yEbDgUCYTtSKAAKCRAnG6Ba0yEb
Dp+TAKCUn7jAbgIj1zQLBEKlAOerSR9IGgCg7LaJa6lo9rbuF5oeOiblnHNtdfg=
=AQy4
-END PGP SIGNATURE-