[Bug 397412] Re: brasero fails when burning DVD
Hi, the initial error report of 2009 is probably due to a hardware problem in the computers bus controller, or the cabling, or the drive's bus controller. > BraseroWodim stderr: CDB: 2A 00 00 01 6C 7E 00 00 1F 00 > ... > BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11 > ... > BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 > 00 00 > ... > BraseroWodim stderr: Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 wodim reported the error wrongly, because it does not recognize the error message format, which is not supposed to be issued by a CD drive. The error codes are rather: Key= 0xB, ASC= 0, ASCQ= 0. This means "Command aborted". I.e. Linux decided to abort the WRITE transaction to block 0x16C7E = 93310. No reason given. (Maybe in dmesg ?) One can find several reports about this error message and its misinterpretation by cdrecord, wodim, or growisofs. Whatever, the error is neither the fault of Brasero nor of the burn program wodim. --- > https://ubuntuforums.org/showthread.php?p=7493563 The drive reports that it is not ready to write to block 0x256B = 9579. That's a drive internal problem. --- > https://ubuntuforums.org/showthread.php?t=1197582 This is simply a Medium Error, i.e. a problem between drive and medium. No software on the Linux side of the cable is to blame. --- > https://lists.ubuntu.com/archives/ubuntu-users/2009-April/179336.html Totally unrelated. --- > https://answers.launchpad.net/ubuntu/+source/brasero/+question/76444 The drive reports that it is not ready to write to block 0x1F9B = 8091. About the same problem as in https://ubuntuforums.org/showthread.php?p=7493563 --- > BraseroCDRecord stderr: cdrecord: Input/output error. write_g1: scsi sendcmd: no error That's what cdrecord and wodim say when they get Key=0xB in the unexpected error reply format. --- > https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/comments/10 > > BraseroWodim stderr: Sense Key: 0x4 Hardware Error, deferred error, Segment 0 > ... > BraseroWodim stderr: Sense Code: 0x09 Qual 0x00 (track following error) Fru This is a problem between drive and medium, reported in the expected format. --- > https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/comments/11/+download > > BraseroCDRecord stderr: Sense Key: 0x5 Illegal Request, Segment 0 > ... > BraseroCDRecord stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - > incompatible format) Fru 0x0 The drive did not like the mediumi state. Maybe it was already written. --- Finally the report of today: > https://launchpadlibrarian.net/331859195/brasero-session.log > > BraseroCDRecord stderr: Sense Key: 0x3 Medium Error, Segment 0 > ... > BraseroCDRecord stderr: Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 The drive perceived an error when trying to write to the medium. Block address was 0xFF6A = -150. Strange as it is, -150 is the normal start address for a CD SAO run. So no fault of the burn program. --- So these bug reports are all about poorly working busses, drives, or media. Not a single software bug in userland is to see. Else i would advise to try the libburn backend of Brasero. But in the cases reported here, success could only happen by incident when the busses, drives, and media are in better mood. Have a nice day :) Thomas -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. https://bugs.launchpad.net/bugs/397412 Title: brasero fails when burning DVD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+subscriptions -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
Same bug here. Also, brasero is leaving behind a lot of temporary files after session is closed with this error: j ~ ❯❯❯ ls /tmp | grep brasero brasero-session.log brasero_tmp_22JU4Y brasero_tmp_55ZT4Y.md5 brasero_tmp_7FJH4Y brasero_tmp_9L2R4Y.bin brasero_tmp_A4JU4Y brasero_tmp_E3JU4Y brasero_tmp_EJLI4Y.bin brasero_tmp_FU0S4Y brasero_tmp_GT0S4Y brasero_tmp_I25P4Y.bin brasero_tmp_IW0S4Y.bin brasero_tmp_OGJH4Y brasero_tmp_QMLI4Y brasero_tmp_STBJ4Y.md5 brasero_tmp_TFJH4Y brasero_tmp_W6LJ4Y brasero_tmp_WMLI4Y brasero_tmp_X6XU4Y brasero_tmp_XU0S4Y brasero_tmp_ZVLI4Y ** Attachment added: "Log with the error" https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+attachment/4926860/+files/brasero-session.log -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. https://bugs.launchpad.net/bugs/397412 Title: brasero fails when burning DVD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+subscriptions -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
I concur! This should be a higher priority! Here's my setup and Error: $ wodim driveropts=help -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/sr0 Device type: Removable CD-ROM Version: 5 Response Format: 2 Capabilities : Vendor_info: 'LITE-ON ' Identification : 'DVDRW LH-20A1S ' Revision : '9L03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Driver options: burnfreePrepare writer to use BURN-Free technology noburnfree Disable using BURN-Free technology forcespeed Tell the drive to force speed even for low quality media $ wodim -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/sr0 Device type: Removable CD-ROM Version: 5 Response Format: 2 Capabilities : Vendor_info: 'LITE-ON ' Identification : 'DVDRW LH-20A1S ' Revision : '9L03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R ** Attachment added: Brasero Log https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+attachment/3141428/+files/brasero-session.log -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. https://bugs.launchpad.net/bugs/397412 Title: brasero fails when burning DVD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+subscriptions -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
Importance Low!!!? Just remember that Brasero is a CD/DVD burning software, and because of this bug it CAN'T BURN DVD's ¬¬ Five versions of Ubuntu had been passed with this problem, thousands of DVD's were wasted and the community had not been officially alerted by developers (and they had been alerted by the community). Brasero is a very big fail in Ubuntu from many points of view: ecological, economical, technical... Sorry, I'm not the kind of people who get so mad with bugs, but I found very irresponsible the treatment of this one. -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. https://bugs.launchpad.net/bugs/397412 Title: brasero fails when burning DVD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/397412/+subscriptions -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
i have the same problem, even after i updated some ppa packages for cdrecord: Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_FZ28AV.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_set_output_size_for_current_track BraseroLocalTrack stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_session_output_size BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_4428AV.bin toc = none BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_current_track BraseroLocalTrack no remote URIs BraseroLocalTrack stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_flags BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_fd_in BraseroChecksumImage called brasero_job_set_output_size_for_current_track BraseroChecksumImage stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage There is a checksum already 0 BraseroCDRecord called brasero_job_get_action BraseroCDRecord getting varg BraseroCDRecord called brasero_job_get_action BraseroCDRecord got varg: BraseroCDRecord deactivating BraseroCDRecord called brasero_job_get_action BraseroCDRecord getting varg BraseroCDRecord called brasero_job_get_action BraseroCDRecord called brasero_job_get_bus_target_lun BraseroCDRecord called brasero_job_get_flags BraseroCDRecord called brasero_job_get_speed BraseroCDRecord called brasero_job_get_flags BraseroCDRecord called brasero_job_get_input_type BraseroCDRecord called brasero_job_get_fd_in BraseroCDRecord called brasero_job_get_current_track BraseroCDRecord called brasero_job_set_current_action BraseroCDRecord got varg: cdrecord -v dev=/dev/sr0 gracetime=0 speed=40 driveropts=burnfree fs=16m -data -nopad /home/vincent/Downloads/VMware-VMvisor-Installer-4.0.0.Update01-208167.x86_64.iso BraseroCDRecord Launching command BraseroCDRecord called brasero_job_get_fd_out BraseroCDRecord stderr: cdrecord: No write mode specified. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: cdrecord: Assuming -sao mode. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: cdrecord: If your drive does not accept -sao, try -tao. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: cdrecord: Future versions of cdrecord may have different drive dependent defaults. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: scsidev: '/dev/sr0' BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: devname: '/dev/sr0' BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: scsibus: -2 target: -2 lun: -2 BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: Warning: Open by 'devname' is unintentional and not supported. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: Linux sg driver version: 3.5.27 BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: SCSI buffer size: 64512 BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stderr: cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stdout: Cdrecord-ProDVD-ProBD-Clone 2.01.01a76 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J BraseroCDRecord stderr: cdrecord: Warning: The DMA speed test has been skipped. BraseroCDRecord called brasero_job_get_flags BraseroCDRecord stdout: TOC Type: 1 = CD-ROM BraseroCDRecord stdout: Using libscg version 'schily-0.9'. BraseroCDRecord stdout: Driveropts: 'burnfree' BraseroCDRecord stdout: atapi: 1 BraseroCDRecord stdout: Device type: Removable CD-ROM BraseroCDRecord stdout: Version: 5 BraseroCDRecord stdout: Response Format: 2 BraseroCDRecord stdout: Capabilities : BraseroCDRecord stdout: Vendor_info: 'hp ' BraseroCDRecord stdout: Identifikation : 'DVD-RAM GH40L ' BraseroCDRecord stdout: Revision : 'RB0E' BraseroCDRecord stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. BraseroCDRecord stdout: Current: CD-R BraseroCDRecord stdout:
[Bug 397412] Re: brasero fails when burning DVD
i have the same problem on Ubuntu 9.10 simulation runs ok, but real job does not. kern.log: [code] . . . Mar 15 21:06:12 dosbook kernel: [ 2833.388464] cdrom: This disc doesn't have any tracks I recognize! Mar 15 21:06:12 dosbook kernel: [ 2833.400561] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.400723] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.400868] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.400905] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.403455] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 15 21:06:12 dosbook kernel: [ 2833.403466] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] Mar 15 21:06:12 dosbook kernel: [ 2833.403477] sr 3:0:0:0: [sr0] Add. Sense: Logical block address out of range Mar 15 21:06:12 dosbook kernel: [ 2833.403488] end_request: I/O error, dev sr0, sector 0 Mar 15 21:06:12 dosbook kernel: [ 2833.405414] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 15 21:06:12 dosbook kernel: [ 2833.405423] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] Mar 15 21:06:12 dosbook kernel: [ 2833.405432] sr 3:0:0:0: [sr0] Add. Sense: Logical block address out of range Mar 15 21:06:12 dosbook kernel: [ 2833.405442] end_request: I/O error, dev sr0, sector 0 Mar 15 21:06:12 dosbook kernel: [ 2833.413203] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.413238] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.414490] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 15 21:06:12 dosbook kernel: [ 2833.414500] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] Mar 15 21:06:12 dosbook kernel: [ 2833.414510] sr 3:0:0:0: [sr0] Add. Sense: Logical block address out of range Mar 15 21:06:12 dosbook kernel: [ 2833.414519] end_request: I/O error, dev sr0, sector 0 Mar 15 21:06:12 dosbook kernel: [ 2833.425005] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.425042] sr 3:0:0:0: [sr0] unaligned transfer Mar 15 21:06:12 dosbook kernel: [ 2833.427756] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 15 21:06:12 dosbook kernel: [ 2833.427767] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] Mar 15 21:06:12 dosbook kernel: [ 2833.427779] sr 3:0:0:0: [sr0] Add. Sense: Logical block address out of range Mar 15 21:06:12 dosbook kernel: [ 2833.427790] end_request: I/O error, dev sr0, sector 0 [/code] brasero-session.log fractions: [code] ... BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=24 driveropts=burnfree -dao fs=27m -swab -audio -useinfo -text ... BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 0 = CD-DA BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type: Removable CD-ROM BraseroWodim stdout: Version: 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info: 'MATSHITA' BraseroWodim stdout: Identification : 'UJDA775 DVD/CDRW' BraseroWodim stdout: Revision : '1.00' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-ROM. BraseroWodim stdout: Current: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) (current) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). BraseroWodim stdout: Driver flags : MMC-3 SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R BraseroWodim stdout: Drive buf size : 1433600 = 1400 KB BraseroWodim stdout: FIFO size : 28311552 = 27648 KB BraseroWodim stderr: Speed set to 4234 KB/s ... BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_set_current_action BraseroWodim stdout: Track 03: 47 of 63 MB written (fifo 100%) [buf 99%] 8.2x. BraseroWodim called
[Bug 397412] Re: brasero fails when burning DVD
could you send it upstream then? Thanks. -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
After Upgrade from 9.04 to 9.10 i got this error as well. I am not able to burn CD /DVD. -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
** Changed in: brasero (Ubuntu) Status: New = Confirmed -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
Thanks for your report, that's something to send directly upstream at http://bugzilla.gnome.org by someone having the issue, for forwarding instructions please read http://wiki.ubuntu.com/Bugs/Upstream/GNOME, Thanks in advance. ** Changed in: brasero (Ubuntu) Importance: Undecided = Low ** Changed in: brasero (Ubuntu) Assignee: (unassigned) = Ubuntu Desktop Bugs (desktop-bugs) -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is a bug assignee. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
Having read an article about bugs in wodim and all sorts of controversy with the original cdrtools, I managed to replace the cdrecord and mkisofs on my system with 'originals' from http://cdrecord.berlios.de/private/cdrecord.html A simulation burn passed but my delight was short lived as again, an error occurred halfway through the write and the log shows the same issue: BraseroCDRecord stderr: cdrecord: Input/output error. write_g1: scsi sendcmd: no error Does it matter that I'm using SATA hdd and dvdrw? The drive controller in my system is : Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) I'll now revert my system back to the original wodim packages and I'll investigate what this 'write_g1: scsi sendcmd: no error' is all about. -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to brasero in ubuntu. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
A victorious workaround! - I installed Nero Linux Trial 3.5.2.1 and it so far works beautifully. I've managed to write discs that have so far failed, using the same ISO images. Of course I'd rather use the native utilities, however I've abandoned those until I learn more about this bug, or it finally is resolved in an update... -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to brasero in ubuntu. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD iso
Hi, I've found this error also occurs during 'simulation' mode, so that should remove my writer hardware and media completely from the equation. At least I can stop wasting media now as I try different things. Also, I've found at this forum, http://ubuntuforums.org/showthread.php?p=7493563, a user experiencing the same symptoms and like that user I have also tried reinstalling wodim and other cdr/dvd related packages. Like this user, I performed an upgrade from ubuntu 8.10 to 9.04. The user on the forum mentions the problem disappeared after a clean install, which I will soon have to try. Could the issue be related to something left over from ubuntu 8.10 upsetting the packages for 9.04? Best Regards, Noel. ** Description changed: Binary package hint: brasero brasero 2.26.1 on ubuntu 9.04 jaunty, all updates applied as of July 09, 2009. DVD ISO images, both DVD-Video and DVD-ROM images, fail to burn. A sample brasero log follows, in this instance the image was of a 4.1Gb DVD-Video. I have been living with this problem since upgrading from ubuntu 8.10 (in which brasero worked fine). I dual-boot with Windows XP and the same image writes ok using Nero on the same hardware, using media from the same spindle. ---brasero log start--- Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_PBU5WU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=8 driveropts=burnfree -dao fs=16m -data -nopad /home/noel/Desktop/dvd.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type: Removable CD-ROM BraseroWodim stdout: Version: 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info: 'PIONEER ' BraseroWodim stdout: Identification : 'DVD-RW DVR-217 ' BraseroWodim stdout: Revision : '1.05' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) BraseroWodim stdout: Profile: 0x0002 (Removable disk) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current)
[Bug 397412] Re: brasero fails when burning DVD
** Summary changed: - brasero fails when burning DVD iso + brasero fails when burning DVD ** Description changed: - Binary package hint: brasero + Binary package hint: brasero wodim brasero 2.26.1 on ubuntu 9.04 jaunty, all updates applied as of July 09, 2009. - DVD ISO images, both DVD-Video and DVD-ROM images, fail to burn. A - sample brasero log follows, in this instance the image was of a 4.1Gb - DVD-Video. I have been living with this problem since upgrading from - ubuntu 8.10 (in which brasero worked fine). + DVD ISO images, both DVD-Video and DVD-ROM images, fail to burn, data + discs created in brasero also fail. A sample brasero log follows, in + this instance the image was of a 4.1Gb DVD-Video. I have been living + with this problem since upgrading from ubuntu 8.10 (in which brasero + worked fine). I dual-boot with Windows XP and the same image writes ok using Nero on the same hardware, using media from the same spindle. ---brasero log start--- Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_PBU5WU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=8 driveropts=burnfree -dao fs=16m -data -nopad /home/noel/Desktop/dvd.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type: Removable CD-ROM BraseroWodim stdout: Version: 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info: 'PIONEER ' BraseroWodim stdout: Identification : 'DVD-RW DVR-217 ' BraseroWodim stdout: Revision : '1.05' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) BraseroWodim stdout: Profile: 0x0002 (Removable disk) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). BraseroWodim stdout:
[Bug 397412] Re: brasero fails when burning DVD iso
Desperately need to get this resolved, I performed a clean install of Ubuntu 9.04 and applied all updates. Burning still fails - the logs show the same error - specifically this line: ... BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error ... For now I'll keep booting into Windows to write to CD/DVDs. Regards, Noel. -- brasero fails when burning DVD iso https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to brasero in ubuntu. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD
Searching for more on this issue, I'm finding I'm not alone: http://ubuntuforums.org/showthread.php?t=1197582 https://lists.ubuntu.com/archives/ubuntu-users/2009-April/179336.html https://answers.launchpad.net/ubuntu/+source/brasero/+question/76444 All show logs with the same error: BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error -- brasero fails when burning DVD https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to brasero in ubuntu. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
[Bug 397412] Re: brasero fails when burning DVD iso
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/28847002/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/28847003/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/28847004/ProcStatus.txt -- brasero fails when burning DVD iso https://bugs.launchpad.net/bugs/397412 You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to brasero in ubuntu. -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
