[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Since installing 23.04 I can no longer print at all. Attempting to print anything from any application makes the printer display "Error 49 - Turn off and turn on again" on the display, and then reboot itself. This was a clean install. Older versions of Ubuntu continue to print at the correct size as they always have. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
The printer has firmware 20111021. The newest available firmware is 20140618 but can only be installed through Windows. This printer always reports low toner and I ignore it because it will continue printing with no loss of quality for hundreds of pages, usually several times what I already printed. It has also been telling me to replace the imaging drum for about 4 years. If you want me to try sending a mono Apple Raster you'll need to tell me how. How does any of this explain why 18.04 still prints at the correct size? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
PPD file from 18.04. The MD5 does not match the other one so it is definitely different somehow. Note that the name is nearly identical but has an extra underscore at the end for some reason. Also there are two print queues for this printer on the old machine. I didn't try the other one. It's PPD file is 10x the size of this one. ** Attachment added: "HP_LaserJet_100_colorMFP_M175nw_61F41D_.ppd" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5643469/+files/HP_LaserJet_100_colorMFP_M175nw_61F41D_.ppd -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Error log from 18.04. The command I ran was: lp -d HP_LaserJet_100_colorMFP_M175nw_61F41D_ -o print-scaling=none 170x230.pdf I also previously tried it without the print-scaling option (not logged), and result was the same. Very close to the correct size both times. ** Attachment added: "error_log_18_04" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5643468/+files/error_log_18_04 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Also I just tried printing the test document on another computer which still has Ubuntu 18.04 installed. The output rectangle was undersized by less than 1mm, which seems okay. I can attach the ppd file and error log from there if it would help. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
error log ** Attachment added: "error_log" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5643437/+files/error_log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Note that both of the print commands failed to print anything at all, but the testipp printer does know that my printer is low on toner. Also I tried deleting the testipp printer and recreating it but still nothing. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
ppd file ** Attachment added: "testipp.ppd" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5643436/+files/testipp.ppd -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
So attaching the PPD to my bug report about not being able to attach it seems to have fixed the problem, and now I was able to attach it here. :) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
ppd ** Attachment added: "HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5642945/+files/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
test ** Attachment added: "170x230.pdf" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5642941/+files/170x230.pdf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Okay well it seems to be specific to the PPD file. I wonder why it won't accept it. I tried adding ".txt" to the filename too but it still wouldn't accept it. Must be due to the contents. Anyway that's the PDF I used to test (same as previous one) and I used the lp command line invocation. I'll see about getting you the PPD some other way. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Launchpad throws an error whenever I try to attach the ppd. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
error log ** Attachment added: "var_log_cups_error_log.txt" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5642940/+files/var_log_cups_error_log.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
** Attachment added: "Test SVG" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5635061/+files/170x230.svg -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
I tested printing a PDF with `lp -o print-scaling=none 170x230.pdf`. The PDF and source SVG are attached. The resulting rectangle is still 168mm x 226mm. ** Attachment added: "Test PDF" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5635060/+files/170x230.pdf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Inkscape and Atril both have the same print dialog. It looks like the attached screenshot. Notice "Scale" is set to 101.5%. This is the only way I can get either of them to print at the correct size. LibreOffice has a different print dialog with no scaling options at all, hence why I had to print it to a PDF first, and then print the PDF using Atril. ** Attachment added: "print dialog for most software except libreoffice" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+attachment/5635059/+files/print-dialog.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] Re: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
In order to work around this I first printed my labels to a PDF file in LibreOffice, then printed that file with 101.5% scaling. I had to do it this way because LibreOffice does not use the standard printer dialog - the scaling option is not shown. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1998917/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1998917] [NEW] Everything prints approximately 2% too small after upgrading to Ubuntu 22.04
Public bug reported: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-Gray..\' already exists W [06/Dec/2022:00:00:06 +] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'HP_LaserJet_100_colorMFP_M175nw_61F41D-DeviceN..\' already exists CurrentDesktop: XFCE Date: Tue Dec 6 11:42:58 2022 InstallationDate: Installed on 2018-05-07 (1673 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lpstat: device for HP_LaserJet_100_colorMFP_M175nw_61F41D: implicitclass://HP_LaserJet_100_colorMFP_M175nw_61F41D/ MachineType: System manufacturer System Product Name Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd'] failed with exit code 2: grep: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw_61F41D.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-48-generic root=UUID=96ca3669-e2ac-4371-b36d-55bc9f3bd03a ro quiet splash vt.handoff=7 RebootRequiredPkgs: Error: path contained symlinks. Snap.Changes: no changes found SourcePackage: cups UpgradeStatus: Upgraded to jammy on 2022-08-12 (115 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: cups (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1998917 Title: Everything prints approximately 2% too small after upgrading to Ubuntu 22.04 Status in cups package in Ubuntu: New Bug description: To reproduce: 1. Open Inkscape. 2. Draw a rectangle 170mm x 230mm. 3. Print it. Expected result: The printed rectangle on paper should measure 170mm x 230mm. Actual result: The rectangle measures 168mm x 226mm, a difference of approximately 2%. I print a lot of labels. I make them in both LibreOffice (for mail merge) and Inkscape (when I want them all the same). I use standard downloaded templates in LibreOffice and in Inkscape I have made my own manually. I recently upgraded to 22.04 and now whenever I print any of my existing documents they no longer line up with the labels. They line up in the top left of the page but at the bottom right they are misaligned, shifted up and left. This happens because the entire page is now printed 2% smaller. Nothing else has changed about my setup: it is the same printer and the same documents printing differently. The printer is a network printer. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: cups 2.4.1op1-1ubuntu4.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CupsErrorLog: W
[Desktop-packages] [Bug 1992254] Re: PCI/internal sound card not detected
I rebooted and everything came back? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1992254 Title: PCI/internal sound card not detected Status in alsa-driver package in Ubuntu: New Bug description: I just rebooted my computer and now my sound card, which has worked perfectly well for the past 5 or so years, apparently no longer exists. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown CurrentDesktop: XFCE Date: Sat Oct 8 19:52:11 2022 InstallationDate: Installed on 2018-05-07 (1614 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: Upgraded to jammy on 2022-08-12 (57 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1992254/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1992254] Re: PCI/internal sound card not detected
** Attachment added: "No sound cards" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1992254/+attachment/5622336/+files/no-sound-cards.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1992254 Title: PCI/internal sound card not detected Status in alsa-driver package in Ubuntu: New Bug description: I just rebooted my computer and now my sound card, which has worked perfectly well for the past 5 or so years, apparently no longer exists. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown CurrentDesktop: XFCE Date: Sat Oct 8 19:52:11 2022 InstallationDate: Installed on 2018-05-07 (1614 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: Upgraded to jammy on 2022-08-12 (57 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1992254/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1992254] [NEW] PCI/internal sound card not detected
Public bug reported: I just rebooted my computer and now my sound card, which has worked perfectly well for the past 5 or so years, apparently no longer exists. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown CurrentDesktop: XFCE Date: Sat Oct 8 19:52:11 2022 InstallationDate: Installed on 2018-05-07 (1614 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: Upgraded to jammy on 2022-08-12 (57 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1992254 Title: PCI/internal sound card not detected Status in alsa-driver package in Ubuntu: New Bug description: I just rebooted my computer and now my sound card, which has worked perfectly well for the past 5 or so years, apparently no longer exists. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown CurrentDesktop: XFCE Date: Sat Oct 8 19:52:11 2022 InstallationDate: Installed on 2018-05-07 (1614 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: Upgraded to jammy on 2022-08-12 (57 days ago) dmi.bios.date: 03/15/2018 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3802 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3802:bd03/15/2018:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1992254/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1968627] Re: file saving dialog grows and grows with each additional file dialog
*** This bug is a duplicate of bug 1971112 *** https://bugs.launchpad.net/bugs/1971112 ** This bug has been marked a duplicate of bug 1971112 File picker gets bigger more and more each time! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xdg-desktop-portal-gtk in Ubuntu. https://bugs.launchpad.net/bugs/1968627 Title: file saving dialog grows and grows with each additional file dialog Status in xdg-desktop-portal-gtk package in Ubuntu: New Bug description: This might be an issue with xdg-desktop-portal-gnome as well, I am using the Brave Browser and noticed this. I *think* it uses xdg- desktop-portal-gtk for the time being though. This is 22.04 Daily Build from April 9th updated. What happens: If you decide to save an image, the file save dialog pops up, provided by either xdg-desktop-portal-gtk or -gnome, this is fine. However, multiple instances of calling the file save dialog such as saving multiple images from a website will cause the dialog box to grow and grow every time it is called, leading to it stretching off the main screen onto my secondary (which is a portrait 1080x1920 monitor to the right of the main 2560x1440 monitor). This is super annoying because you never know where the window is going to appear, and at what size (well, I guess you do know that it is going to grow each time, but it is VERY inconsistent). I've attached a scaled down webm, in it I am downloading cat pictures from Google Image Search. For the first image, it shows how large it tends to get, and I resize it to a smaller size. Then, with each image that the dialog is brought up for, it grows and grows. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xdg-desktop-portal-gtk 1.14.0-1build1 ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30 Uname: Linux 5.15.0-25-generic x86_64 ApportVersion: 2.20.11-0ubuntu80 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Apr 11 15:39:25 2022 InstallationDate: Installed on 2022-04-09 (1 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Daily amd64 (20220409) SourcePackage: xdg-desktop-portal-gtk UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xdg-desktop-portal-gtk/+bug/1968627/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1905458] Re: [snap] Chromium USB enumeration fails when usbmon module is loaded
Or rather, the bug is between apparmor and this: https://man7.org/linux /man-pages/man3/udev_enumerate_scan_devices.3.html -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1905458 Title: [snap] Chromium USB enumeration fails when usbmon module is loaded Status in chromium-browser package in Ubuntu: New Bug description: Version: chromium 87.0.4280.66 1411 Steps to reproduce: 1. Have Chromium snap, with raw-usb plug connected. 2. sudo modprobe usbmon. 3. Open Chromium and try to use a webpage that has webusb. Result: Chromium cannot see any USB devices on the system, regardless of whether it has raw-usb or not. The following errors are printed on dmesg: ``` [3701471.283584] audit: type=1400 audit(1606101844.664:6015): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:4" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283636] audit: type=1400 audit(1606101844.664:6016): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:2" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283700] audit: type=1400 audit(1606101844.664:6017): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:0" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283786] audit: type=1400 audit(1606101844.664:6018): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:7" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283869] audit: type=1400 audit(1606101844.664:6019): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:5" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283982] audit: type=1400 audit(1606101844.664:6020): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:3" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 ``` Chromium will then print this on stderr: ``` [3121487:3121626:1123/032552.888385:ERROR:udev_watcher.cc(97)] Failed to begin udev enumeration. ``` Why this happens: Chromium enumerates USB devices by querying udev. Specifically by using udev_enumerate_scan_devices. When usbmon module is loaded, some new device nodes are created for the monitor endpoints. They are only readable by root. When Chromium scans for normal USB devices, it finds the monitors and tries to probe them. Apparmor blocks it, which causes udev_enumerate_scan_devices to fail. Impact: There is no way for the user to know this error has occurred unless they happen to be watching dmesg or the stderr of Chromium (which requires they ran it from a terminal). Unless they check both of these places and realize that the error messages are connected, Chromium will just appear to behave as if there are no USB devices connected to the system at all. If the user does realize that usbmon is causing a problem, they must restart Chromium after unloading it, because it will not retry if enumeration ever fails. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1905458/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1905458] Re: [snap] Chromium USB enumeration fails when usbmon module is loaded
This problem has got somewhat worse: now all webcam raw-usb udev nodes are owned by root. That means chromium raw-usb won't work if you have a webcam. I think this is really a bug in chromium tbh. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1905458 Title: [snap] Chromium USB enumeration fails when usbmon module is loaded Status in chromium-browser package in Ubuntu: New Bug description: Version: chromium 87.0.4280.66 1411 Steps to reproduce: 1. Have Chromium snap, with raw-usb plug connected. 2. sudo modprobe usbmon. 3. Open Chromium and try to use a webpage that has webusb. Result: Chromium cannot see any USB devices on the system, regardless of whether it has raw-usb or not. The following errors are printed on dmesg: ``` [3701471.283584] audit: type=1400 audit(1606101844.664:6015): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:4" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283636] audit: type=1400 audit(1606101844.664:6016): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:2" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283700] audit: type=1400 audit(1606101844.664:6017): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:0" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283786] audit: type=1400 audit(1606101844.664:6018): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:7" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283869] audit: type=1400 audit(1606101844.664:6019): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:5" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283982] audit: type=1400 audit(1606101844.664:6020): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:3" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 ``` Chromium will then print this on stderr: ``` [3121487:3121626:1123/032552.888385:ERROR:udev_watcher.cc(97)] Failed to begin udev enumeration. ``` Why this happens: Chromium enumerates USB devices by querying udev. Specifically by using udev_enumerate_scan_devices. When usbmon module is loaded, some new device nodes are created for the monitor endpoints. They are only readable by root. When Chromium scans for normal USB devices, it finds the monitors and tries to probe them. Apparmor blocks it, which causes udev_enumerate_scan_devices to fail. Impact: There is no way for the user to know this error has occurred unless they happen to be watching dmesg or the stderr of Chromium (which requires they ran it from a terminal). Unless they check both of these places and realize that the error messages are connected, Chromium will just appear to behave as if there are no USB devices connected to the system at all. If the user does realize that usbmon is causing a problem, they must restart Chromium after unloading it, because it will not retry if enumeration ever fails. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1905458/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1905458] [NEW] [snap] Chromium USB enumeration fails with usbmon module is loaded
Public bug reported: Version: chromium 87.0.4280.66 1411 Steps to reproduce: 1. Have Chromium snap, with raw-usb plug connected. 2. sudo modprobe usbmon. 3. Open Chromium and try to use a webpage that has webusb. Result: Chromium cannot see any USB devices on the system, regardless of whether it has raw-usb or not. The following errors are printed on dmesg: ``` [3701471.283584] audit: type=1400 audit(1606101844.664:6015): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:4" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283636] audit: type=1400 audit(1606101844.664:6016): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:2" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283700] audit: type=1400 audit(1606101844.664:6017): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:0" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283786] audit: type=1400 audit(1606101844.664:6018): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:7" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283869] audit: type=1400 audit(1606101844.664:6019): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:5" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283982] audit: type=1400 audit(1606101844.664:6020): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:3" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 ``` Chromium will then print this on stderr: ``` [3121487:3121626:1123/032552.888385:ERROR:udev_watcher.cc(97)] Failed to begin udev enumeration. ``` Why this happens: Chromium enumerates USB devices by querying udev. Specifically by using udev_enumerate_scan_devices. When usbmon module is loaded, some new device nodes are created for the monitor endpoints. They are only readable by root. When Chromium scans for normal USB devices, it finds the monitors and tries to probe them. Apparmor blocks it, which causes udev_enumerate_scan_devices to fail. Impact: There is no way for the user to know this error has occurred unless they happen to be watching dmesg or the stderr of Chromium (which requires they ran it from a terminal). Unless they check both of these places and realize that the error messages are connected, Chromium will just appear to behave as if there are no USB devices connected to the system at all. If the user does realize that usbmon is causing a problem, they must restart Chromium after unloading it, because it will not retry if enumeration ever fails. ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New ** Description changed: Version: chromium 87.0.4280.66 1411 - Steps to reproduce: 1. Have Chromium snap, with raw-usb plug connected. 2. sudo modprobe usbmon. 3. Open Chromium and try to use a webpage that has webusb. Result: Chromium cannot see any USB devices on the system, regardless of whether it has raw-usb or not. The following errors are printed on dmesg: ``` [3701471.283584] audit: type=1400 audit(1606101844.664:6015): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:4" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283636] audit: type=1400 audit(1606101844.664:6016): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:2" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283700] audit: type=1400 audit(1606101844.664:6017): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:0" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283786] audit: type=1400 audit(1606101844.664:6018): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:7" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283869] audit: type=1400 audit(1606101844.664:6019): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:5" pid=3120526 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [3701471.283982] audit: type=1400 audit(1606101844.664:6020): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c508:3" pid=3120526 comm="ThreadPoolForeg"
[Desktop-packages] [Bug 1905457] [NEW] [snap] Chromium can enumerate USB devices without the raw-usb plug
Public bug reported: Version: chromium 87.0.4280.66 1411 Steps to reproduce: 1. Have Chromium snap, with raw-usb plug disconnected. 2. Open Chromium and try to use a webpage that has webusb. Result: USB.getDevices() and USB.requestDevice() will succeed but USBDevice.open() will fail, emitting "DOMException: Permission Denied" on the browser console. Or, put another way, you can select a USB device that you want the webpage to use, but it is impossible for the webpage to actually use it. Why this happens: Chromium enumerates USB devices by querying udev. It does not require elevated permissions beyond the snap defaults in order to do this. So it can retrieve a list of USB devices even without raw-usb. Impact: It is impossible to access the USB devices until the raw-usb plug is connected. However, to a normal user, it appears that Chromium already has USB permissions because it can enumerate devices. The webusb API is in a confusing, partially-working state, and there is nothing to indicate that Chromium needs additional permissions in order for it to fully work. ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1905457 Title: [snap] Chromium can enumerate USB devices without the raw-usb plug Status in chromium-browser package in Ubuntu: New Bug description: Version: chromium 87.0.4280.66 1411 Steps to reproduce: 1. Have Chromium snap, with raw-usb plug disconnected. 2. Open Chromium and try to use a webpage that has webusb. Result: USB.getDevices() and USB.requestDevice() will succeed but USBDevice.open() will fail, emitting "DOMException: Permission Denied" on the browser console. Or, put another way, you can select a USB device that you want the webpage to use, but it is impossible for the webpage to actually use it. Why this happens: Chromium enumerates USB devices by querying udev. It does not require elevated permissions beyond the snap defaults in order to do this. So it can retrieve a list of USB devices even without raw-usb. Impact: It is impossible to access the USB devices until the raw-usb plug is connected. However, to a normal user, it appears that Chromium already has USB permissions because it can enumerate devices. The webusb API is in a confusing, partially-working state, and there is nothing to indicate that Chromium needs additional permissions in order for it to fully work. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1905457/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1332623] Re: Thunar behaves inconsistently with USB flash drive FAT32 partitions
I have Bionic/18.04/glib 2.56 and this bug still happens. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1332623 Title: Thunar behaves inconsistently with USB flash drive FAT32 partitions Status in glib2.0 package in Ubuntu: Confirmed Status in thunar package in Ubuntu: Fix Released Bug description: I installed Xubuntu 14.04 and performed no customizations or reconfigurations. Observation: Thunar 1.6.3 ("File Manager" from menu) on Xubuntu 14.04 handles write permission to inserted USB flash drives inconsistently: * I am able to create a nil file on the flash drive with Thunar and edit it. Clearly, the flash drive is not read-only. * Using Thunar, I cannot copy an existing file (E.g. ~/.profile) and paste it on the flash drive - "destination is read-only" (not true!). * However, in a terminal window, `cp` with the flash drive as a destination succeeds. I tried this on drives by different manufacturers and with differing capacities and on two different Xubuntu 14.04 installations. There might be a configuration change for Thunar to allow paste to flash drives. If so, this should be enabled when Thunar is installed as this behaviour is what users expect. Note: I created the FAT32 partition with `gparted` on Linux. I also got the same results after creating a FAT32 partition using an MACOSX system. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: thunar 1.6.3-1ubuntu5 ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2 Uname: Linux 3.13.0-29-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Jun 20 11:30:40 2014 InstallationDate: Installed on 2014-06-19 (1 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) SourcePackage: thunar UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1332623/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
*** This bug is a duplicate of bug 1749546 *** https://bugs.launchpad.net/bugs/1749546 The Bluez timeout errors still show up in ~/.xsession-errors at least on hardware without Bluetooth. However, it seems to be harmless. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
One final thing: this does not affect Ubuntu desktop after install. But it does affect the Ubuntu live image, which takes an extra minute or so to boot. It seems that the Ubuntu desktop installer rebuilds the system font cache during install. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
Some more: touching the system cache files doesn't make it work. Binary diff on the cache files before and after running fc-cache shows this: 63 c7 c3 5a 00 00 00 00 47 72 ce 15 00 00 00 00 63 c7 c3 5a 00 00 00 00 00 00 00 00 00 00 00 00 Before, at offset 0x38, the "bad" cache files have a non-zero 32 bit number. The number is different in every "bad" cache file. It is always zero in the "good" files. This is the only difference. The rest of each file is identical. I don't know what this field represents. Need a fontconfig expert to look at this. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
Another piece of the puzzle: if you run: sudo fc-cache -fv this will rebuild the system font cache in /var/cache/fontconfig If you then delete the user's cache in ~/.cache/fontconfig and re-log, there is no delay... and the user's font cache will NOT be rebuilt. After a delayed login, user's cache and the system cache appear to contain the same files. So it looks as if something thinks the system cache is out of date and wants to rebuild it. Whatever it is only has user permissions, so rebuilds the font cache in the user's .cache -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
seems related: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=845058 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
As far as the original bug with delayed login goes... it seems that the Bluetooth stuff is a red herring. Since it only happens on first login, I deleted the contents of ~ and relogged. The delay came back, so I bisected the files until I arrived at the single file which needs to be deleted in order for the delay to happen. And that file is: ~/.cache/fontconfig/9b89f8e3dae116d678bbf48e5f21f69b-le32d4.cache-7 This cache file is associated with the Noto CJK fonts at: /usr/share/fonts/opentype/noto (You can see this by running strings on it.) Deleting this file while the user is not logged in causes the next login to take 60 seconds. ** Bug watch added: Debian Bug tracker #845058 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=845058 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
I tried to log in over ssh and run top so I could watch which processes were running but this caused the delay to disappear. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
Since this only happens on first login, I ran a diff on the full home directory before/after login: https://paste.ubuntu.com/p/SJ2nNx7WfP/ I don't see anything obvious in there. The pulse cookie and a blueman settings file (empty) were created. The rest seems to be Thunar/desktop defaults and example files. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
On the current daily ISO this now hangs for 50 seconds instead of 75, and the blueman/bluetooth messages are completely gone from xsession- errors. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in blueman package in Ubuntu: New Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin- bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
There is more stuff in syslog too. It looks like pulseaudio is trying and failing to start blueman. ** Attachment added: "cat syslog | grep -E '(pulseaudio|blueman)'" https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+attachment/5077997/+files/syslog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Possibly also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate servic
** Attachment added: "log running blueman-applet manually" https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+attachment/5077985/+files/blueman-applet-manual.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Possibly also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bl
** Summary changed: - Xubuntu: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) + ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) ** Summary changed: - ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) + Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: Xubuntu: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Possibly also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1754836] Re: Xubuntu: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_st
No, we are talking about the errors in xsession-errors.txt: ERROR:dbus.proxies:Introspect error on org.bluez:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) ERROR:dbus.proxies:Introspect error on org.bluez:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Note that each one of these errors is a separate time out, so the total delay is 75 seconds. This delay blocks the desktop from starting during boot and first login. The delay can be reproduced any time on the live session by attempting to start blueman-applet from the terminal - it will produce the same errors and then give up after 75 seconds. The computer under test has no bluetooth hardware and blueman is not running. A patch was added to 16.04 because this situation led to blueman outright crashing there. Now in 18.04 instead of crashing it delays boot up by 75 seconds instead. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1754836 Title: ERROR:dbus.proxies:Introspect error on org.bluez:/org/bluez: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Xubuntu seeing long first time boot to desktop from login. Possibly also causing the long time to desktop from try/install livesession dialogue. Including xsession-errors from the first time boot on installed system. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Mar 10 11:32:59 2018 InstallationDate: Installed on 2018-03-08 (1 days ago) InstallationMedia: Xubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180306.1) InterestingModules: bluetooth MachineType: NOVATECH LTD MBB-44608 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=8d9f054a-4c7a-481f-966e-fc2cd6f51aca ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: 7383241-001 dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnMBB-44608:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.family: AMI PLATFORM dmi.product.name: MBB-44608 dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD hciconfig: rfkill: syslog: Mar 10 11:30:16 test-MBB-44608 NetworkManager[679]: [1520681416.8951] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1754836/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1719209] Re: firefox opens nautilus inside XCFE desktop
** Also affects: desktop-file-utils (Ubuntu) Importance: Undecided Status: New ** Changed in: desktop-file-utils (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to desktop-file-utils in Ubuntu. https://bugs.launchpad.net/bugs/1719209 Title: firefox opens nautilus inside XCFE desktop Status in desktop-file-utils package in Ubuntu: Confirmed Status in firefox package in Ubuntu: Confirmed Bug description: Firefox opens nautilus inside XCFE desktop whereas XCFE file browser thunar ought to be opened. Since I didn't change the settings the file browser should adapt to the desktop environment. ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: firefox 55.0.2+build1-0ubuntu0.17.04.1 ProcVersionSignature: Ubuntu 4.10.0-35.39-generic 4.10.17 Uname: Linux 4.10.0-35-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.4-0ubuntu4.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: felix 1568 F pulseaudio BuildID: 20170816204344 Channel: Unavailable CurrentDesktop: XFCE Date: Sun Sep 24 22:23:52 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2017-06-14 (101 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) IpRoute: default via 192.168.1.1 dev wlp4s0 proto static metric 600 169.254.0.0/16 dev wlp4s0 scope link metric 1000 192.168.1.0/24 dev wlp4s0 proto kernel scope link src 192.168.1.2 metric 600 Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=55.0.2/20170816204344 (In use) RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/12/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: V1.12 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire V5-571G dmi.board.vendor: Acer dmi.board.version: V1.12 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: Acer dmi.chassis.version: V1.12 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrV1.12:bd06/12/2012:svnAcer:pnAspireV5-571G:pvrV1.12:rvnAcer:rnAspireV5-571G:rvrV1.12:cvnAcer:ct9:cvrV1.12: dmi.product.name: Aspire V5-571G dmi.product.version: V1.12 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/desktop-file-utils/+bug/1719209/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1712587] Re: Firefox 55 instantly crashes on Google Maps
** Bug watch added: Mozilla Bugzilla #1393164 https://bugzilla.mozilla.org/show_bug.cgi?id=1393164 ** Also affects: firefox via https://bugzilla.mozilla.org/show_bug.cgi?id=1393164 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1712587 Title: Firefox 55 instantly crashes on Google Maps Status in Mozilla Firefox: Unknown Status in firefox package in Ubuntu: New Bug description: To reproduce: 1. Go to http://maps.google.co.uk Result: Firefox instantly crashes. I tried disabling hardware acceleration. It didn't make any difference. This crash is 100% reproducible. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: firefox 55.0.2+build1-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-92.115-generic 4.4.76 Uname: Linux 4.4.0-92-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: al 2782 F pulseaudio /dev/snd/controlC1: al 2782 F pulseaudio /dev/snd/controlC2: al 2782 F pulseaudio /dev/snd/controlC0: al 2782 F pulseaudio BuildID: 20170816210634 Channel: Unavailable CurrentDesktop: XFCE Date: Wed Aug 23 14:46:26 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2015-07-12 (773 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) IpRoute: default via 192.168.0.1 dev enp0s31f6 proto static metric 100 169.254.0.0/16 dev docker0 scope link metric 1000 linkdown 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 192.168.0.0/24 dev enp0s31f6 proto kernel scope link src 192.168.0.5 metric 100 IwConfig: lono wireless extensions. enp0s31f6 no wireless extensions. docker0 no wireless extensions. Locales: extensions.sqlite corrupt or missing MostRecentCrashID: bp-b982df2a-0748-4395-a586-f88c01170823 PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=55.0.2/20170816210634 (In use) RfKill: RunningIncompatibleAddons: False SourcePackage: firefox SubmittedCrashIDs: bp-b982df2a-0748-4395-a586-f88c01170823 bp-93cc1950-6206-4734-99b7-7cfea1170823 bp-7dec83a1-282b-4c55-9b8f-3f5690170823 bp-d61de9e9-55ac-4c4d-8f89-867360170823 bp-f907228f-d818-4d12-8ff5-cef060170823 Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/24/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1801 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1801:bd03/24/2016:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1712587/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1712587] [NEW] Firefox 55 instantly crashes on Google Maps
Public bug reported: To reproduce: 1. Go to http://maps.google.co.uk Result: Firefox instantly crashes. I tried disabling hardware acceleration. It didn't make any difference. This crash is 100% reproducible. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: firefox 55.0.2+build1-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-92.115-generic 4.4.76 Uname: Linux 4.4.0-92-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: al 2782 F pulseaudio /dev/snd/controlC1: al 2782 F pulseaudio /dev/snd/controlC2: al 2782 F pulseaudio /dev/snd/controlC0: al 2782 F pulseaudio BuildID: 20170816210634 Channel: Unavailable CurrentDesktop: XFCE Date: Wed Aug 23 14:46:26 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2015-07-12 (773 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) IpRoute: default via 192.168.0.1 dev enp0s31f6 proto static metric 100 169.254.0.0/16 dev docker0 scope link metric 1000 linkdown 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 192.168.0.0/24 dev enp0s31f6 proto kernel scope link src 192.168.0.5 metric 100 IwConfig: lono wireless extensions. enp0s31f6 no wireless extensions. docker0 no wireless extensions. Locales: extensions.sqlite corrupt or missing MostRecentCrashID: bp-b982df2a-0748-4395-a586-f88c01170823 PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=55.0.2/20170816210634 (In use) RfKill: RunningIncompatibleAddons: False SourcePackage: firefox SubmittedCrashIDs: bp-b982df2a-0748-4395-a586-f88c01170823 bp-93cc1950-6206-4734-99b7-7cfea1170823 bp-7dec83a1-282b-4c55-9b8f-3f5690170823 bp-d61de9e9-55ac-4c4d-8f89-867360170823 bp-f907228f-d818-4d12-8ff5-cef060170823 Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/24/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1801 dmi.board.asset.tag: Default string dmi.board.name: Z170-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1801:bd03/24/2016:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ170-A:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1712587 Title: Firefox 55 instantly crashes on Google Maps Status in firefox package in Ubuntu: New Bug description: To reproduce: 1. Go to http://maps.google.co.uk Result: Firefox instantly crashes. I tried disabling hardware acceleration. It didn't make any difference. This crash is 100% reproducible. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: firefox 55.0.2+build1-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-92.115-generic 4.4.76 Uname: Linux 4.4.0-92-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: al 2782 F pulseaudio /dev/snd/controlC1: al 2782 F pulseaudio /dev/snd/controlC2: al 2782 F pulseaudio /dev/snd/controlC0: al 2782 F pulseaudio BuildID: 20170816210634 Channel: Unavailable CurrentDesktop: XFCE Date: Wed Aug 23 14:46:26 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2015-07-12 (773 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) IpRoute: default via 192.168.0.1 dev enp0s31f6 proto static metric 100 169.254.0.0/16 dev docker0 scope link metric 1000 linkdown 172.17.0.0/16 dev docker0 proto kernel scope link src
[Desktop-packages] [Bug 1217585] Re: System hangs after some time with nouveau and GT240
I do wish you would stop marking this bug incomplete. It is very much incomplete, is an upstream bug, and the developers are not asking for further information. ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/1217585 Title: System hangs after some time with nouveau and GT240 Status in Nouveau Xorg driver: Confirmed Status in xserver-xorg-video-nouveau package in Ubuntu: Confirmed Status in xserver-xorg-video-nouveau package in Fedora: Unknown Bug description: With the Nouveau driver I get random system hangs in the Live CD - any version since it was switched to nouveau up until today's daily images. It happens after half an hour to a couple of hours usage and affects installed systems as well, until they are switched to the proprietary driver. This is a well known bug in other trackers but I can't see it anywhere on Launchpad, so I'm reporting it and will add bug watches. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: xserver-xorg-video-nouveau 1:1.0.8-0ubuntu3 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 CasperVersion: 1.336 Date: Tue Aug 27 22:16:06 2013 LiveMediaBuild: Xubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) MarkForUpload: True ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-nouveau UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/nouveau/+bug/1217585/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1644911] Re: simple-scan no longer functions after upgrade to 16.04
Still broken. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to simple-scan in Ubuntu. https://bugs.launchpad.net/bugs/1644911 Title: simple-scan no longer functions after upgrade to 16.04 Status in simple-scan package in Ubuntu: New Bug description: My scanner is a HP M175nw. On 15.10 my scanner worked correctly. After upgrading from 15.10 to 16.04, simple-scan can no longer communicate with my scanner, on two different computers. Printing still works correctly. Upon attempting to scan any kind of document the error message "Failed to scan. Cannot connect to scanner." is displayed. In the console, the following messages are displayed: MIB search path: /home/al/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp Cannot find module (SNMPv2-MIB): At line 1 in (none) Cannot find module (IF-MIB): At line 1 in (none) Cannot find module (IP-MIB): At line 1 in (none) Cannot find module (TCP-MIB): At line 1 in (none) Cannot find module (UDP-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 1 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 1 in (none) Cannot find module (MTA-MIB): At line 1 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 1 in (none) Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 37 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'TruthValue' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Unlinked OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Undefined identifier: enterprises near line 39 of /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Unlinked OID in UCD-DISKIO-MIB: ucdDiskIOMIB ::= { ucdExperimental 15 } Undefined identifier: ucdExperimental near line 19 of /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-TC): At line 10 in /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Unlinked OID in UCD-DLMOD-MIB: ucdDlmodMIB ::= { ucdExperimental 14 } Undefined identifier: ucdExperimental near line 13 of /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Unlinked OID in LM-SENSORS-MIB: lmSensors ::= { ucdExperimental 16 } Undefined identifier: ucdExperimental near line 32 of /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'ucdavis' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DEMO-MIB.txt) Unlinked OID in UCD-DEMO-MIB: ucdDemoMIB ::= { ucdavis 14 } Undefined identifier: ucdavis near line 7 of /usr/share/snmp/mibs/UCD-DEMO-MIB.txt Cannot find module (SNMP-TARGET-MIB): At line 1 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 9 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Cannot find module (SNMPv2-SMI): At line 8 in /usr/share/snmp/mibs/NET-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-MIB.txt) Unlinked OID in NET-SNMP-MIB: netSnmp ::= { enterprises 8072 } Undefined identifier: enterprises near line 10 of /usr/share/snmp/mibs/NET-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 21 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Did not find 'SnmpAdminString' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpObjects' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpModuleIDs' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpNotifications' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpGroups' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find
[Desktop-packages] [Bug 1644911] Re: simple-scan no longer functions after upgrade to 16.04
Tested with a Canon USB scanner. That also fails. Also tested scanning with scanimage which also fails, while producing the same output. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to simple-scan in Ubuntu. https://bugs.launchpad.net/bugs/1644911 Title: simple-scan no longer functions after upgrade to 16.04 Status in simple-scan package in Ubuntu: New Bug description: My scanner is a HP M175nw. On 15.10 my scanner worked correctly. After upgrading from 15.10 to 16.04, simple-scan can no longer communicate with my scanner, on two different computers. Printing still works correctly. Upon attempting to scan any kind of document the error message "Failed to scan. Cannot connect to scanner." is displayed. In the console, the following messages are displayed: MIB search path: /home/al/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp Cannot find module (SNMPv2-MIB): At line 1 in (none) Cannot find module (IF-MIB): At line 1 in (none) Cannot find module (IP-MIB): At line 1 in (none) Cannot find module (TCP-MIB): At line 1 in (none) Cannot find module (UDP-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 1 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 1 in (none) Cannot find module (MTA-MIB): At line 1 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 1 in (none) Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 37 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'TruthValue' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Unlinked OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Undefined identifier: enterprises near line 39 of /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Unlinked OID in UCD-DISKIO-MIB: ucdDiskIOMIB ::= { ucdExperimental 15 } Undefined identifier: ucdExperimental near line 19 of /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-TC): At line 10 in /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Unlinked OID in UCD-DLMOD-MIB: ucdDlmodMIB ::= { ucdExperimental 14 } Undefined identifier: ucdExperimental near line 13 of /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Unlinked OID in LM-SENSORS-MIB: lmSensors ::= { ucdExperimental 16 } Undefined identifier: ucdExperimental near line 32 of /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'ucdavis' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DEMO-MIB.txt) Unlinked OID in UCD-DEMO-MIB: ucdDemoMIB ::= { ucdavis 14 } Undefined identifier: ucdavis near line 7 of /usr/share/snmp/mibs/UCD-DEMO-MIB.txt Cannot find module (SNMP-TARGET-MIB): At line 1 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 9 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Cannot find module (SNMPv2-SMI): At line 8 in /usr/share/snmp/mibs/NET-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-MIB.txt) Unlinked OID in NET-SNMP-MIB: netSnmp ::= { enterprises 8072 } Undefined identifier: enterprises near line 10 of /usr/share/snmp/mibs/NET-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 21 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Did not find 'SnmpAdminString' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpObjects' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpModuleIDs' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpNotifications' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpGroups' in module NET-SNMP-MIB
[Desktop-packages] [Bug 1644911] [NEW] simple-scan no longer functions after upgrade to 16.04
Public bug reported: My scanner is a HP M175nw. On 15.10 my scanner worked correctly. After upgrading from 15.10 to 16.04, simple-scan can no longer communicate with my scanner, on two different computers. Printing still works correctly. Upon attempting to scan any kind of document the error message "Failed to scan. Cannot connect to scanner." is displayed. In the console, the following messages are displayed: MIB search path: /home/al/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp Cannot find module (SNMPv2-MIB): At line 1 in (none) Cannot find module (IF-MIB): At line 1 in (none) Cannot find module (IP-MIB): At line 1 in (none) Cannot find module (TCP-MIB): At line 1 in (none) Cannot find module (UDP-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 1 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 1 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 1 in (none) Cannot find module (MTA-MIB): At line 1 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 1 in (none) Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 37 in /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Did not find 'TruthValue' in module #-1 (/usr/share/snmp/mibs/UCD-SNMP-MIB.txt) Unlinked OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Undefined identifier: enterprises near line 39 of /usr/share/snmp/mibs/UCD-SNMP-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DISKIO-MIB.txt) Unlinked OID in UCD-DISKIO-MIB: ucdDiskIOMIB ::= { ucdExperimental 15 } Undefined identifier: ucdExperimental near line 19 of /usr/share/snmp/mibs/UCD-DISKIO-MIB.txt Cannot find module (SNMPv2-TC): At line 10 in /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DLMOD-MIB.txt) Unlinked OID in UCD-DLMOD-MIB: ucdDlmodMIB ::= { ucdExperimental 14 } Undefined identifier: ucdExperimental near line 13 of /usr/share/snmp/mibs/UCD-DLMOD-MIB.txt Cannot find module (SNMPv2-TC): At line 15 in /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/LM-SENSORS-MIB.txt) Unlinked OID in LM-SENSORS-MIB: lmSensors ::= { ucdExperimental 16 } Undefined identifier: ucdExperimental near line 32 of /usr/share/snmp/mibs/LM-SENSORS-MIB.txt Did not find 'ucdavis' in module UCD-SNMP-MIB (/usr/share/snmp/mibs/UCD-DEMO-MIB.txt) Unlinked OID in UCD-DEMO-MIB: ucdDemoMIB ::= { ucdavis 14 } Undefined identifier: ucdavis near line 7 of /usr/share/snmp/mibs/UCD-DEMO-MIB.txt Cannot find module (SNMP-TARGET-MIB): At line 1 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 9 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Cannot find module (SNMPv2-SMI): At line 8 in /usr/share/snmp/mibs/NET-SNMP-MIB.txt Did not find 'enterprises' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-MIB.txt) Unlinked OID in NET-SNMP-MIB: netSnmp ::= { enterprises 8072 } Undefined identifier: enterprises near line 10 of /usr/share/snmp/mibs/NET-SNMP-MIB.txt Cannot find module (SNMPv2-TC): At line 21 in /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Did not find 'SnmpAdminString' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpObjects' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpModuleIDs' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpNotifications' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'netSnmpGroups' in module NET-SNMP-MIB (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'DisplayString' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'RowStatus' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Did not find 'TruthValue' in module #-1 (/usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt) Unlinked OID in NET-SNMP-AGENT-MIB: nsAgentNotifyGroup ::= { netSnmpGroups 9 } Undefined identifier: netSnmpGroups near line 545 of /usr/share/snmp/mibs/NET-SNMP-AGENT-MIB.txt Unlinked OID in NET-SNMP-AGENT-MIB: nsTransactionGroup ::= { netSnmpGroups 8 }
[Desktop-packages] [Bug 1511626] Re: gvfsd-smb crashed with signal 5 in g_settings_set_property()
User error. XDG_DATA_DIRS was messed up by local configuration. ** Changed in: gvfs (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1511626 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() Status in gvfs package in Ubuntu: Invalid Bug description: Happens every time I try to mount a samba share. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: gvfs-backends 1.24.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.7 Architecture: amd64 Date: Fri Oct 30 06:32:26 2015 ExecutablePath: /usr/lib/gvfs/gvfsd-smb InstallationDate: Installed on 2015-07-12 (110 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) ProcCmdline: /usr/lib/gvfs/gvfsd-smb --spawner :1.9 /org/gtk/gvfs/exec_spaw/7 ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 Signal: 5 SourcePackage: gvfs StacktraceTop: g_settings_set_property (object=0x1695f50 [GSettings], prop_id=, value=, pspec=) at /build/buildd/glib2.0-2.44.1/./gio/gsettings.c:521 g_object_new_internal (nqueue=, value=, pspec=, object=) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1415 g_object_new_internal (class=0x7f1d6cc47c00 , class@entry=0x16a, params=0x0, params@entry=0x7ffea81b7370, n_params=1) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1808 g_object_new_valist (object_type=object_type@entry=23644640, first_property_name=first_property_name@entry=0x7f1d6d4efc4f "schema-id", var_args=var_args@entry=0x7ffea81b74c0) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2033 g_object_new (object_type=23644640, first_property_name=0x7f1d6d4efc4f "schema-id") at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1617 ThreadStacktrace: $4 = 0x4 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1511626/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1549455] Re: Unity 8 doesn't load on Intel Pineview graphics [qtubuntu: ASSERT: "eglDestroyContext(mEglDisplay, mEglContext) == EGL_TRUE"]
I have an Atom N455 convertible with Pineview graphics. Unity8 session just displays a black screen forever. Unity 7 works fine. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1549455 Title: Unity 8 doesn't load on Intel Pineview graphics [qtubuntu: ASSERT: "eglDestroyContext(mEglDisplay, mEglContext) == EGL_TRUE"] Status in Mir: Confirmed Status in mesa package in Ubuntu: Confirmed Status in mir package in Ubuntu: Confirmed Status in qtdeclarative package in Ubuntu: Confirmed Status in qtubuntu package in Ubuntu: Confirmed Bug description: This bug Makes the pc UNUSABLE when I try to launch Unity 8 and Mir, after writing the password on the login (in the image attached) the bar to enter the password disappears and my computer screen stays stuck without them let me do anything. the connection begins to separate and reattach alone and I can only move the cursor. it makes the computer unusable and I am forced to restart forced to then enter into Unity 7. represented in the screenshot is the lock status after entering the password. Version: unity8.12+16.04.201604.01.1 Version of Mir : 0.21 To manage notifications about this bug go to: https://bugs.launchpad.net/mir/+bug/1549455/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1512002] Re: Annoying dialog "Authentication is required to change your own user data"
This is somehow related to indicator-messages. It has been reported before at https://bugs.launchpad.net/ubuntu/+source/indicator- messages/+bug/1192300 but that bug involves a remote authentication server. I have no such server, so it is similar but not the same. ** Also affects: indicator-messages (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to policykit-1-gnome in Ubuntu. https://bugs.launchpad.net/bugs/1512002 Title: Annoying dialog "Authentication is required to change your own user data" Status in indicator-messages package in Ubuntu: New Status in policykit-1-gnome package in Ubuntu: Confirmed Bug description: Every few days a dialog pops up saying "Authentication is required to change your own user data" with an entry field for a password. If I type my user's password the dialog will reappear with an empty entry field. If I click on the cross to close the window many times it will be gone, but reappear a few days later. I don't know what this window is for and it makes no difference whether I close it or leave it. I don't use the gnome keyring. This started with Ubuntu 15.04 or maybe with an earlier release, and is still there in Ubuntu 15.10, also on machines I did a fresh install. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-messages/+bug/1512002/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1511626] Re: gvfsd-smb crashed with signal 5 in g_settings_set_property()
No such directory in /usr/local The output of that command is: '' -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1511626 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() Status in gvfs package in Ubuntu: New Bug description: Happens every time I try to mount a samba share. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: gvfs-backends 1.24.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.7 Architecture: amd64 Date: Fri Oct 30 06:32:26 2015 ExecutablePath: /usr/lib/gvfs/gvfsd-smb InstallationDate: Installed on 2015-07-12 (110 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) ProcCmdline: /usr/lib/gvfs/gvfsd-smb --spawner :1.9 /org/gtk/gvfs/exec_spaw/7 ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 Signal: 5 SourcePackage: gvfs StacktraceTop: g_settings_set_property (object=0x1695f50 [GSettings], prop_id=, value=, pspec=) at /build/buildd/glib2.0-2.44.1/./gio/gsettings.c:521 g_object_new_internal (nqueue=, value=, pspec=, object=) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1415 g_object_new_internal (class=0x7f1d6cc47c00 , class@entry=0x16a, params=0x0, params@entry=0x7ffea81b7370, n_params=1) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1808 g_object_new_valist (object_type=object_type@entry=23644640, first_property_name=first_property_name@entry=0x7f1d6d4efc4f "schema-id", var_args=var_args@entry=0x7ffea81b74c0) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2033 g_object_new (object_type=23644640, first_property_name=0x7f1d6d4efc4f "schema-id") at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1617 ThreadStacktrace: $4 = 0x4 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1511626/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1511626] Re: gvfsd-smb crashed with signal 5 in g_settings_set_property()
** Changed in: gvfs (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1511626 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() Status in gvfs package in Ubuntu: New Bug description: Happens every time I try to mount a samba share. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: gvfs-backends 1.24.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.7 Architecture: amd64 Date: Fri Oct 30 06:32:26 2015 ExecutablePath: /usr/lib/gvfs/gvfsd-smb InstallationDate: Installed on 2015-07-12 (110 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) ProcCmdline: /usr/lib/gvfs/gvfsd-smb --spawner :1.9 /org/gtk/gvfs/exec_spaw/7 ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 Signal: 5 SourcePackage: gvfs StacktraceTop: g_settings_set_property (object=0x1695f50 [GSettings], prop_id=, value=, pspec=) at /build/buildd/glib2.0-2.44.1/./gio/gsettings.c:521 g_object_new_internal (nqueue=, value=, pspec=, object=) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1415 g_object_new_internal (class=0x7f1d6cc47c00 , class@entry=0x16a, params=0x0, params@entry=0x7ffea81b7370, n_params=1) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1808 g_object_new_valist (object_type=object_type@entry=23644640, first_property_name=first_property_name@entry=0x7f1d6d4efc4f "schema-id", var_args=var_args@entry=0x7ffea81b74c0) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2033 g_object_new (object_type=23644640, first_property_name=0x7f1d6d4efc4f "schema-id") at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1617 ThreadStacktrace: $4 = 0x4 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1511626/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1511626] Re: gvfsd-smb crashed with signal 5 in g_settings_set_property()
al@al-desktop:~$ dpkg -S org.gnome.system.smb gvfs-backends: /usr/share/glib-2.0/schemas/org.gnome.system.smb.gschema.xml al@al-desktop:~$ ls -l /usr/share/glib-2.0/schemas/org.gnome.system.smb.gschema.xml -rw-r--r-- 1 root root 418 Apr 14 2015 /usr/share/glib-2.0/schemas/org.gnome.system.smb.gschema.xml -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1511626 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() Status in gvfs package in Ubuntu: Incomplete Bug description: Happens every time I try to mount a samba share. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: gvfs-backends 1.24.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.7 Architecture: amd64 Date: Fri Oct 30 06:32:26 2015 ExecutablePath: /usr/lib/gvfs/gvfsd-smb InstallationDate: Installed on 2015-07-12 (110 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) ProcCmdline: /usr/lib/gvfs/gvfsd-smb --spawner :1.9 /org/gtk/gvfs/exec_spaw/7 ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, user) LANGUAGE=en_GB:en LANG=en_GB.UTF-8 Signal: 5 SourcePackage: gvfs StacktraceTop: g_settings_set_property (object=0x1695f50 [GSettings], prop_id=, value=, pspec=) at /build/buildd/glib2.0-2.44.1/./gio/gsettings.c:521 g_object_new_internal (nqueue=, value=, pspec=, object=) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1415 g_object_new_internal (class=0x7f1d6cc47c00 , class@entry=0x16a, params=0x0, params@entry=0x7ffea81b7370, n_params=1) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1808 g_object_new_valist (object_type=object_type@entry=23644640, first_property_name=first_property_name@entry=0x7f1d6d4efc4f "schema-id", var_args=var_args@entry=0x7ffea81b74c0) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2033 g_object_new (object_type=23644640, first_property_name=0x7f1d6d4efc4f "schema-id") at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:1617 ThreadStacktrace: $4 = 0x4 Title: gvfsd-smb crashed with signal 5 in g_settings_set_property() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1511626/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1181423] Re: Cannot print at all with USB to parallel adapter and HP 4L
Still broken in 15.04. ** Changed in: cups (Ubuntu) Status: Expired = New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1181423 Title: Cannot print at all with USB to parallel adapter and HP 4L Status in cups package in Ubuntu: New Bug description: Since upgrading to raring I am unable to print anything at all using Prolific 2303 USB to parallel adapter and a HP LaserJet 4L. cups error log attached. This is the output when adding the printer and trying to print a test page. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: cups 1.6.2-1ubuntu5 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Fri May 17 23:29:30 2013 InstallationDate: Installed on 2013-04-26 (20 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) KernLog: Lpstat: device for HP-LaserJet-4L: usb://Unknown/Printer device for M175nw: hp:/net/HP_LaserJet_100_colorMFP_M175nw?ip=192.168.0.175 MachineType: System manufacturer System Product Name MarkForUpload: True Papersize: a4 PpdFiles: HP-LaserJet-4L: HP LaserJet 4L Foomatic/ljet4 (recommended) M175nw: HP LaserJet 100 color MFP M175 Postscript (recommended) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=52fbfaf1-aa35-45f8-9a1c-b867ce923edd ro quiet splash SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0704 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: M4A79XTD EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0X dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0704:bd11/25/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A79XTDEVO:rvrRevX.0X:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1181423/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1181423] Re: Cannot print at all with USB to parallel adapter and HP 4L
** Attachment added: cups error log https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1181423/+attachment/4437636/+files/error_log.gz -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1181423 Title: Cannot print at all with USB to parallel adapter and HP 4L Status in cups package in Ubuntu: New Bug description: Since upgrading to raring I am unable to print anything at all using Prolific 2303 USB to parallel adapter and a HP LaserJet 4L. cups error log attached. This is the output when adding the printer and trying to print a test page. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: cups 1.6.2-1ubuntu5 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Fri May 17 23:29:30 2013 InstallationDate: Installed on 2013-04-26 (20 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) KernLog: Lpstat: device for HP-LaserJet-4L: usb://Unknown/Printer device for M175nw: hp:/net/HP_LaserJet_100_colorMFP_M175nw?ip=192.168.0.175 MachineType: System manufacturer System Product Name MarkForUpload: True Papersize: a4 PpdFiles: HP-LaserJet-4L: HP LaserJet 4L Foomatic/ljet4 (recommended) M175nw: HP LaserJet 100 color MFP M175 Postscript (recommended) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=52fbfaf1-aa35-45f8-9a1c-b867ce923edd ro quiet splash SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0704 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: M4A79XTD EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0X dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0704:bd11/25/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A79XTDEVO:rvrRevX.0X:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1181423/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1437023] [NEW] Jump to playing song doesn't work if filters are used
Public bug reported: Steps to reproduce: 1. Play a song. 2. Browse to another part of the library. 3. Press Ctrl-J or Playback-Jump to playing song Expected result: Playing song should be displayed. Actual result: Nothing happens. Video demonstrating the bug: https://www.youtube.com/watch?v=XaypxFPLRk4 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: banshee 2.9.0+really2.6.2-2ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2 Uname: Linux 3.19.0-10-generic i686 ApportVersion: 2.16.2-0ubuntu4 Architecture: i386 CurrentDesktop: XFCE Date: Thu Mar 26 19:45:31 2015 InstallationDate: Installed on 2015-03-03 (23 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha i386 (20150303) SourcePackage: banshee UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: banshee (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to banshee in Ubuntu. https://bugs.launchpad.net/bugs/1437023 Title: Jump to playing song doesn't work if filters are used Status in banshee package in Ubuntu: New Bug description: Steps to reproduce: 1. Play a song. 2. Browse to another part of the library. 3. Press Ctrl-J or Playback-Jump to playing song Expected result: Playing song should be displayed. Actual result: Nothing happens. Video demonstrating the bug: https://www.youtube.com/watch?v=XaypxFPLRk4 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: banshee 2.9.0+really2.6.2-2ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2 Uname: Linux 3.19.0-10-generic i686 ApportVersion: 2.16.2-0ubuntu4 Architecture: i386 CurrentDesktop: XFCE Date: Thu Mar 26 19:45:31 2015 InstallationDate: Installed on 2015-03-03 (23 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha i386 (20150303) SourcePackage: banshee UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/1437023/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1437020] [NEW] Jump to playing song doesn't work if filters are used
Public bug reported: To reproduce: 1. Select an artist and start playing a song. 2. Browse to another part of the library. 3. Press ctrl-J or View-Jump to playing song Expected result: Playing song should be displayed. Actual result: Nothing happens. Video demonstrating the bug: https://www.youtube.com/watch?v=SkiCdh7-Ops ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: rhythmbox 3.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2 Uname: Linux 3.19.0-10-generic i686 ApportVersion: 2.16.2-0ubuntu4 Architecture: i386 CurrentDesktop: XFCE Date: Thu Mar 26 19:38:39 2015 InstallationDate: Installed on 2015-03-03 (23 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha i386 (20150303) SourcePackage: rhythmbox UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1437020 Title: Jump to playing song doesn't work if filters are used Status in rhythmbox package in Ubuntu: New Bug description: To reproduce: 1. Select an artist and start playing a song. 2. Browse to another part of the library. 3. Press ctrl-J or View-Jump to playing song Expected result: Playing song should be displayed. Actual result: Nothing happens. Video demonstrating the bug: https://www.youtube.com/watch?v=SkiCdh7-Ops ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: rhythmbox 3.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2 Uname: Linux 3.19.0-10-generic i686 ApportVersion: 2.16.2-0ubuntu4 Architecture: i386 CurrentDesktop: XFCE Date: Thu Mar 26 19:38:39 2015 InstallationDate: Installed on 2015-03-03 (23 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha i386 (20150303) SourcePackage: rhythmbox UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1437020/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270090] Re: time-admin can not install ntp
This broke in the first place because gksudo was removed from the default distribution. So it is broken in all recent releases. I would do the patch for Vivid if I knew how. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-system-tools in Ubuntu. https://bugs.launchpad.net/bugs/1270090 Title: time-admin can not install ntp Status in gnome-system-tools package in Ubuntu: Confirmed Bug description: xfce4-panel clock can not install ntp, take a look at the image. Could not install package The necessary applications to install the package could not be found I can install ntp by apt-get, and it works at the clock. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xfce4-panel 4.10.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-3.18-generic 3.13.0-rc8 Uname: Linux 3.13.0-3-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 Date: Fri Jan 17 11:51:15 2014 InstallationDate: Installed on 2014-01-09 (7 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140109) ProcEnviron: LANGUAGE=fr_FR TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: xfce4-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1409015] [NEW] about:startpage is in wrong language
Public bug reported: After a fresh install with today's Xubuntu daily, the Firefox homepage is in the wrong language. I expect English/UK. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: firefox 34.0+build2-0ubuntu2 ProcVersionSignature: Ubuntu 3.18.0-8.9-generic 3.18.1 Uname: Linux 3.18.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.15.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: al 1800 F pulseaudio BuildID: 20141127104503 Channel: Unavailable CurrentDesktop: XFCE Date: Fri Jan 9 13:48:25 2015 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2015-01-09 (0 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha amd64 (20150109) IpRoute: default via 192.168.0.1 dev eth0 proto static 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.68 metric 1 IwConfig: eth0 no wireless extensions. lono wireless extensions. Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=34.0/20141127104503 RfKill: RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid ** Attachment added: firefoxlang.png https://bugs.launchpad.net/bugs/1409015/+attachment/4294636/+files/firefoxlang.png ** Description changed: After a fresh install with today's Xubuntu daily, the Firefox homepage - is in the wrong language. + is in the wrong language. I expect English/UK. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: firefox 34.0+build2-0ubuntu2 ProcVersionSignature: Ubuntu 3.18.0-8.9-generic 3.18.1 Uname: Linux 3.18.0-8-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.15.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: al 1800 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: al 1800 F pulseaudio BuildID: 20141127104503 Channel: Unavailable CurrentDesktop: XFCE Date: Fri Jan 9 13:48:25 2015 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: - # interfaces(5) file used by ifup(8) and ifdown(8) - auto lo - iface lo inet loopback + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2015-01-09 (0 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha amd64 (20150109) IpRoute: - default via 192.168.0.1 dev eth0 proto static - 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.68 metric 1 + default via 192.168.0.1 dev eth0 proto static + 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.68 metric 1 IwConfig: - eth0 no wireless extensions. - - lono wireless extensions. + eth0 no wireless extensions. + + lono wireless extensions. Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js Profiles: Profile0 (Default) - LastVersion=34.0/20141127104503 RfKill: - + RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1409015 Title: about:startpage is in wrong
[Desktop-packages] [Bug 1385624] Re: wrapper-2.0 crashed with SIGSEGV in strrchr()
Did you attempt to add the indicator-menu (global menu indicator)? Because that does not work, will crash like this, and is unsupported. ** Also affects: xfce4-indicator-plugin (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1385624 Title: wrapper-2.0 crashed with SIGSEGV in strrchr() Status in gtk+3.0 package in Ubuntu: New Status in xfce4-indicator-plugin package in Ubuntu: New Status in xfce4-panel package in Ubuntu: Confirmed Bug description: It just crashed. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: xfce4-panel 4.11.1-0ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-23.31-lowlatency 3.16.4 Uname: Linux 3.16.0-23-lowlatency x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Oct 25 12:26:05 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/xfce4/panel/wrapper-2.0 InstallationDate: Installed on 2011-11-13 (1076 days ago) InstallationMedia: Xubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) ProcCmdline: /usr/lib/x86_64-linux-gnu/xfce4/panel/wrapper-2.0 /usr/lib/x86_64-linux-gnu/xfce4/panel/plugins/libindicator-plugin.so 5 18874401 indicator Indicator\ Plugin Provides\ a\ panel\ area\ for\ Unity\ indicators.\ Indicators\ allow\ applications\ and\ system\ services\ to\ display\ their\ status\ and\ interact\ with\ the\ user. SegvAnalysis: Segfault happened at: 0x7f6d654461f5 strrchr+37: movdqu (%rdi),%xmm0 PC (0x7f6d654461f5) ok source (%rdi) (0x) not located in a known VMA region (needed readable region)! destination %xmm0 ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: xfce4-panel StacktraceTop: strrchr () at ../sysdeps/x86_64/strrchr.S:32 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ffi_call_unix64 () from /usr/lib/x86_64-linux-gnu/libffi.so.6 Title: wrapper-2.0 crashed with SIGSEGV in strrchr() UpgradeStatus: Upgraded to utopic on 2014-10-25 (0 days ago) UserGroups: adm admin audio cdrom dialout dip fax floppy fuse lp lpadmin mythtv netdev plugdev sambashare scanner tape vboxusers video wireshark To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1385624/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270090] Re: time-admin can not install ntp
Sorry I forgot about this. Here's a debdiff which should fix it. It will need cleaning up and testing. ** Patch added: debdiff: use packagekit to install things instead of gksudo and synaptic https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+attachment/4279694/+files/use-package.diff -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-system-tools in Ubuntu. https://bugs.launchpad.net/bugs/1270090 Title: time-admin can not install ntp Status in gnome-system-tools package in Ubuntu: Confirmed Bug description: xfce4-panel clock can not install ntp, take a look at the image. Could not install package The necessary applications to install the package could not be found I can install ntp by apt-get, and it works at the clock. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xfce4-panel 4.10.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-3.18-generic 3.13.0-rc8 Uname: Linux 3.13.0-3-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 Date: Fri Jan 17 11:51:15 2014 InstallationDate: Installed on 2014-01-09 (7 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140109) ProcEnviron: LANGUAGE=fr_FR TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: xfce4-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270090] Re: time-admin can not install ntp
What this does is replace all the synaptic and gksudo code with a dbus call to packagekit. The old code was added in an Ubuntu patch, so I just regenerated that patch with the new code instead. I don't know if that is the correct way to do it. Only one file needs to be modified, gst- package.c. The new version of 80_gst-packages-common.patch is generated with different diff options so the diff is kind of confusing, sorry about that. The packagekit source is taken almost verbatim from the C example here: http://www.freedesktop.org/software/PackageKit/pk-faq.html#session- methods -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-system-tools in Ubuntu. https://bugs.launchpad.net/bugs/1270090 Title: time-admin can not install ntp Status in gnome-system-tools package in Ubuntu: Confirmed Bug description: xfce4-panel clock can not install ntp, take a look at the image. Could not install package The necessary applications to install the package could not be found I can install ntp by apt-get, and it works at the clock. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xfce4-panel 4.10.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-3.18-generic 3.13.0-rc8 Uname: Linux 3.13.0-3-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 Date: Fri Jan 17 11:51:15 2014 InstallationDate: Installed on 2014-01-09 (7 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140109) ProcEnviron: LANGUAGE=fr_FR TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: xfce4-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270090] Re: time-admin can not install ntp
** Patch removed: debdiff: use packagekit to install things instead of gksudo and synaptic https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+attachment/4279694/+files/use-package.diff ** Patch added: Fix typo on my email address https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+attachment/4279705/+files/use-packagekit.diff -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-system-tools in Ubuntu. https://bugs.launchpad.net/bugs/1270090 Title: time-admin can not install ntp Status in gnome-system-tools package in Ubuntu: Confirmed Bug description: xfce4-panel clock can not install ntp, take a look at the image. Could not install package The necessary applications to install the package could not be found I can install ntp by apt-get, and it works at the clock. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xfce4-panel 4.10.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-3.18-generic 3.13.0-rc8 Uname: Linux 3.13.0-3-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 Date: Fri Jan 17 11:51:15 2014 InstallationDate: Installed on 2014-01-09 (7 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140109) ProcEnviron: LANGUAGE=fr_FR TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: xfce4-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270090] Re: time-admin can not install ntp
PPA for trusty: https://launchpad.net/~a-j-buxton/+archive/ubuntu/gst- packagekit -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-system-tools in Ubuntu. https://bugs.launchpad.net/bugs/1270090 Title: time-admin can not install ntp Status in gnome-system-tools package in Ubuntu: Confirmed Bug description: xfce4-panel clock can not install ntp, take a look at the image. Could not install package The necessary applications to install the package could not be found I can install ntp by apt-get, and it works at the clock. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xfce4-panel 4.10.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-3.18-generic 3.13.0-rc8 Uname: Linux 3.13.0-3-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 Date: Fri Jan 17 11:51:15 2014 InstallationDate: Installed on 2014-01-09 (7 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140109) ProcEnviron: LANGUAGE=fr_FR TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: xfce4-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1270090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
(20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd09/26/2013:svnHewlett-Packard:pnHPPavilion17NotebookPC:pvr0892100059160:rvnHewlett-Packard:rn1985:rvr01.13:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 17 Notebook PC dmi.product.version: 0892100059160 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11+14.04.20140409-0ubuntu1 version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon Apr 21 08:29:06 2014 xserver.configfile: /etc/X11/xorg.conf xserver.errors: open /dev/dri/card0: No such file or directory AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2 xserver.video_driver: fglrx To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1310489/+subscriptions -- Alistair Buxton a.j.bux...@gmail.com -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in ubuntu-drivers-common source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf
[Desktop-packages] [Bug 512427] Re: Don't let offscreen widgets do grab adds
This patch causes an annoying g_critical if you add a grab on a widget before it is realized. In this case toplevel-window will be null. This also make me wonder what happens if you add a grab to an offscreen widget before realizing it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+2.0 in Ubuntu. https://bugs.launchpad.net/bugs/512427 Title: Don't let offscreen widgets do grab adds Status in “gtk+2.0” package in Ubuntu: Fix Released Bug description: Widgets inside GtkOffscreenWindow seem like they should not be allowed to do grab the mouse or whatever, as this can deactivate open menus and stuff. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/512427/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
gpu-manager only detected one GPU because I only *have* one GPU. This hardware configuration has never changed since I built the computer. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “ubuntu-drivers-common” source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10
[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
No, somewhat obviously, I did not unplug my graphics card or disable it in the BIOS; this would render the system unbootable. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “ubuntu-drivers-common” source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10 dmi.chassis.vendor:
[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
I also still have the same problem - xorg.conf is randomly overwritten by gpu-manager. ** Attachment added: nvidia-bug-report.log.gz https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1310489/+attachment/4242349/+files/nvidia-bug-report.log.gz -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “ubuntu-drivers-common” source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset
[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
** Attachment added: xorg.conf https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1310489/+attachment/4242350/+files/xorg.conf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “ubuntu-drivers-common” source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10
[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
Available here: https://launchpadlibrarian.net/186397248/gpu-manager.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “ubuntu-drivers-common” source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version
[Desktop-packages] [Bug 1225326] Re: transmission-gtk crashed with SIGSEGV in curl_easy_pause()
This bug has been fixed upstream, but Ubuntu is still shipping an older version without the fix. https://trac.transmissionbt.com/ticket/5580 ** Bug watch added: Transmission Trac #5580 https://trac.transmissionbt.com/ticket/5580 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to transmission in Ubuntu. https://bugs.launchpad.net/bugs/1225326 Title: transmission-gtk crashed with SIGSEGV in curl_easy_pause() Status in “transmission” package in Ubuntu: Confirmed Bug description: Transmission crashed twice since i added the download of LibreOffice 4.1.1 from http://tracker.documentfoundation.org:6969/announce. Crash report is attached. . Xubuntu 12.04.3 Transmission 2.82-0ubuntu0.12.04.2 . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/1225326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1225326] Re: transmission-gtk crashed with SIGSEGV in curl_easy_pause()
The only change to webseed.c between 2.82 (version in ubuntu) and the version reported as fixed (r14219) is this: https://trac.transmissionbt.com/changeset/14188/ -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to transmission in Ubuntu. https://bugs.launchpad.net/bugs/1225326 Title: transmission-gtk crashed with SIGSEGV in curl_easy_pause() Status in “transmission” package in Ubuntu: Confirmed Bug description: Transmission crashed twice since i added the download of LibreOffice 4.1.1 from http://tracker.documentfoundation.org:6969/announce. Crash report is attached. . Xubuntu 12.04.3 Transmission 2.82-0ubuntu0.12.04.2 . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/1225326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1376476] Re: custom xorg.conf still gets overwritten by gpu-manager
** Changed in: ubuntu-drivers-common (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1376476 Title: custom xorg.conf still gets overwritten by gpu-manager Status in “ubuntu-drivers-common” package in Ubuntu: Confirmed Bug description: I am using an Nvidia Tesla GPU unit C2070 for numerical calculations exclusively. I have installed the cuda 6.5 toolkit which includes the Nvidia drivers. My system also has an Intel video card that I use for display. The only way to make cuda and the intel display is to work together is by means of a custom xorg.conf, forcing the X server to work on the Intel card and the Cuda applications on the Nvidia Tesla unit. Once I have done the required changes to xorg.conf I reboot, X crashes and the changes to xorg.conf are gone. According to the gpu-manager log, it modified the file... Wouldn't it be a simple matter to include a config file option to tell gpu-manager not to modify xorg.conf when needed? I just upgraded from 12.04 to 14.04, gpu-manager version is 1:0.2.91.7 . Any help is appreciated, thanks! -Santiago To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1376476/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1376832] [NEW] gpu-manager still deletes xorg.conf
Public bug reported: To reproduce: 1. Create /etc/X11/xorg.conf 2. Wait until there is an update for some package (I don't know which one, suspect an nvidia driver one). 3. Reboot. Result: gpu-manager deletes xorg.conf. Expected result: gpu-manager does not delete xorg.conf. Despite claims of a fix, this is still happening. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-drivers-common 1:0.2.91.7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 CurrentDesktop: XFCE Date: Thu Oct 2 17:36:03 2014 InstallationDate: Installed on 2014-06-29 (94 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: ubuntu-drivers-common UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubuntu-drivers-common (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1376832 Title: gpu-manager still deletes xorg.conf Status in “ubuntu-drivers-common” package in Ubuntu: New Bug description: To reproduce: 1. Create /etc/X11/xorg.conf 2. Wait until there is an update for some package (I don't know which one, suspect an nvidia driver one). 3. Reboot. Result: gpu-manager deletes xorg.conf. Expected result: gpu-manager does not delete xorg.conf. Despite claims of a fix, this is still happening. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-drivers-common 1:0.2.91.7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 CurrentDesktop: XFCE Date: Thu Oct 2 17:36:03 2014 InstallationDate: Installed on 2014-06-29 (94 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: ubuntu-drivers-common UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1376832/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1376832] Re: gpu-manager still deletes xorg.conf
With commentary: How many cards? 1 The number of cards has changed! -- No it hasn't. Has the system changed? Yes -- Wrong System configuration has changed -- Wrong Single card detected Driver is already loaded and enabled Nothing to do System configuration has changed Removing xorg.conf. Path: /etc/X11/xorg.conf -- Wrong -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1376832 Title: gpu-manager still deletes xorg.conf Status in “ubuntu-drivers-common” package in Ubuntu: New Bug description: To reproduce: 1. Create /etc/X11/xorg.conf 2. Wait until there is an update for some package (I don't know which one, suspect an nvidia driver one). 3. Reboot. Result: gpu-manager deletes xorg.conf. Expected result: gpu-manager does not delete xorg.conf. Despite claims of a fix, this is still happening. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-drivers-common 1:0.2.91.7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 CurrentDesktop: XFCE Date: Thu Oct 2 17:36:03 2014 InstallationDate: Installed on 2014-06-29 (94 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: ubuntu-drivers-common UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1376832/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1376832] Re: gpu-manager still deletes xorg.conf
** Attachment added: gpu-manager-log https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1376832/+attachment/4222613/+files/gpu-manager.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1376832 Title: gpu-manager still deletes xorg.conf Status in “ubuntu-drivers-common” package in Ubuntu: New Bug description: To reproduce: 1. Create /etc/X11/xorg.conf 2. Wait until there is an update for some package (I don't know which one, suspect an nvidia driver one). 3. Reboot. Result: gpu-manager deletes xorg.conf. Expected result: gpu-manager does not delete xorg.conf. Despite claims of a fix, this is still happening. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-drivers-common 1:0.2.91.7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 CurrentDesktop: XFCE Date: Thu Oct 2 17:36:03 2014 InstallationDate: Installed on 2014-06-29 (94 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: ubuntu-drivers-common UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1376832/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1076830] Re: panel crashes if you add, remove, then add the same applet
Firstly this isn't a duplicate bug report - the steps to reproduce are different. Secondly, the steps to reproduce work on any hardware, so if a developer was really interested in fixing this it would be trivial for them to simply repeat the steps to reproduce and get a backtrace. ** This bug is no longer a duplicate of bug 1106388 gnome-panel crashes when removing applet from panel. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-panel in Ubuntu. https://bugs.launchpad.net/bugs/1076830 Title: panel crashes if you add, remove, then add the same applet Status in Desktop panel for GNOME: New Status in “gnome-panel” package in Ubuntu: New Bug description: To reproduce: 1. windows-alt-right-click the panel, and then add to panel 2. Add an applet that you don't already have, eg Fish, or Notification area (which is inexplicably missing from the default config) 3. Close Add to panel window 4. windows-alt-right-click the applet you just added and remove it. 5. Repeat steps 1 and 2, adding the same applet again. Expected result: Same as the first time. Actual result: gnome-panel crashes. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: gnome-panel 1:3.6.0-0ubuntu2 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 Date: Fri Nov 9 01:51:36 2012 GsettingsChanges: InstallationDate: Installed on 2012-11-08 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: gnome-panel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-panel/+bug/1076830/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1106388] Re: gnome-panel crashes when removing applet from panel.
This bug is trivial to reproduce on any computer, therefore no strack trace is required by the developers - if they really want one, they can generate it easily. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-panel in Ubuntu. https://bugs.launchpad.net/bugs/1106388 Title: gnome-panel crashes when removing applet from panel. Status in “gnome-panel” package in Ubuntu: Won't Fix Bug description: To reproduce: 1. Clean install raring 26th jan daily. 2. Install gnome-session-fallback and enter session. 3. Add fish applet to panel, then remove it. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: gnome-panel 1:3.6.2-0ubuntu3 ProcVersionSignature: Ubuntu 3.8.0-2.6-generic 3.8.0-rc4 Uname: Linux 3.8.0-2-generic x86_64 ApportVersion: 2.8-0ubuntu2 Architecture: amd64 CrashCounter: 1 Date: Sat Jan 26 22:13:55 2013 Disassembly: = 0x7f88a6e711c8: Cannot access memory at address 0x7f88a6e711c8 ExecutablePath: /usr/bin/gnome-panel GsettingsChanges: InstallationDate: Installed on 2013-01-26 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130126) MarkForUpload: True ProcCmdline: gnome-panel ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f88a6e711c8:Cannot access memory at address 0x7f88a6e711c8 PC (0x7f88a6e711c8) ok SP (0x7fff0542e6e0) ok Reason could not be automatically determined. Signal: 11 SourcePackage: gnome-panel StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: gnome-panel crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-panel/+bug/1106388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Re: Bogus another operation in progress error. Can't copy files from a bluetooth device
Subsribed additional packages to try to get some eyes on this. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Re: Bogus another operation in progress error. Can't copy files from a bluetooth device
Today my workaround didn't work. This suggests the problem is in gvfsd or obex-data-server. ** Also affects: obex-data-server (Ubuntu) Importance: Undecided Status: New ** Also affects: gvfs (Ubuntu) Importance: Undecided Status: New ** Changed in: gvfs (Ubuntu) Status: New = Confirmed ** Changed in: obex-data-server (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to obex-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Re: Bogus another operation in progress error. Can't copy files from a bluetooth device
ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-22 (228 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) InterestingModules: btusb rfcomm bnep bluetooth MachineType: ASUS All Series Package: obex-data-server PackageArchitecture: amd64 ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=e1e7d1a7-19e8-4203-ad6a-86a144db61bc ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Tags: trusty Uname: Linux 3.13.0-32-generic x86_64 UpgradeStatus: Upgraded to trusty on 2014-06-20 (49 days ago) UserGroups: _MarkForUpload: True dmi.bios.date: 04/10/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0401 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87M-E dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0401:bd04/10/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87M-E:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS hciconfig: hci0: Type: BR/EDR Bus: USB BD Address: 00:0A:3A:56:79:E3 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:7596474 acl:34665 sco:0 events:3541 errors:0 TX bytes:195498 acl:3728 sco:0 commands:44 errors:0 rfkill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no syslog: Aug 8 17:10:10 stuart-desktop bluetoothd[667]: Adapter /org/bluez/667/hci0 has been disabled Aug 8 17:27:48 stuart-desktop bluetoothd[667]: Adapter /org/bluez/667/hci0 has been enabled ** Tags added: apport-collected trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 -
[Desktop-packages] [Bug 1284308] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172993/+files/BootDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172994/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Dependencies.txt
apport information ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172995/+files/Dependencies.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172996/+files/Lspci.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172997/+files/Lsusb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4173001/+files/ProcModules.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] Re: Bogus another operation in progress error. Can't copy files from a bluetooth device
That didn't really attach anything useful, oh well. Here's the log snippet from ~/.cache/upstart/dbus/ showing the error happening: ** (zeitgeist-fts:2146): WARNING **: Unable to get info on application://nautilus-autostart.desktop ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-S9DAKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-S9DAKX (retval 2) ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-NM4FKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-NM4FKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-9X2MKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-9X2MKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-XTK5JX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-XTK5JX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-3LWGKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-3LWGKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-GYMKKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-GYMKKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-W77BKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-W77BKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: ChangeCurrentFolderToRoot failed ** (zeitgeist-fts:2146): WARNING **: Unable to get info on application://nautilus-autostart.desktop ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-RFE9JX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-RFE9JX (retval 2) ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-284GKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-284GKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-UP0AKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-UP0AKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** (zeitgeist-fts:2146): WARNING **: Unable to get info on application://nautilus-autostart.desktop ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-F3C5JX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-F3C5JX (retval 2) ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-LVIFKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-LVIFKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer got cancelled ** (zeitgeist-fts:2146): WARNING **: Unable to get info on application://nautilus-autostart.desktop ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-OQULKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-OQULKX (retval 2) ** Message: ChangeCurrentFolderToRoot failed ** Message: ChangeCurrentFolderToRoot failed ** Message: transfer of Image010.jpg to /tmp/gvfsobexftp-tmp-VWUIKX started ** Message: filename: /Memory card/Images/Image010.jpg (Image010.jpg) copying to /tmp/gvfsobexftp-tmp-VWUIKX (retval 2) The ChangeCurrentFolderToRoot failed appears to be harmless, for example when opening in eog this message is printed but the image still loads. transfer got cancelled appears to be the message which is ultimately printed when a transfer actually fails. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the
[Desktop-packages] [Bug 1284308] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4173000/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] getfacl.txt
apport information ** Attachment added: getfacl.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4173004/+files/getfacl.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4172998/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4173002/+files/UdevDb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1284308] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1284308/+attachment/4173003/+files/UdevLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1284308 Title: Bogus another operation in progress error. Can't copy files from a bluetooth device Status in “bluez” package in Ubuntu: Confirmed Status in “gvfs” package in Ubuntu: Confirmed Status in “obex-data-server” package in Ubuntu: Confirmed Bug description: I have upgraded to Ubuntu 13.10. And as usual, with the upgrade, a whole new bluetooth issue, which this times makes transferring files from the phone to the computer (which already was painful) completely impossible! How I reproduce (100% systematic): 1 - click on the Bluetooth icon in the notification area 2 - from the dropdown menu, choose bluetooth settings 3 - select the phone among the listed devices 4 - click on Browse files 5 - A Nautilus windows opens, allowing me to browse files on the phone. Open the DCIM/Camera folder 6 - Select a couple of files. Either drag and drop them, or copy and then paste them, into a folder on the computer = I systematically get an error, but it can be any of the two variants shown in the two screenshots (one says there was an error copying the file, the other says there was an error getting information about the file; in both cases the given reason is another operation in progress. Note also that in one case there is a Retry button, in the other there is not - pure nonsense). I then ejected the phone with the eject button next to its name in Nautilus, and repeated the whole process. I randomly get any of three outcomes: - the one described above (MOST of the times) - at step 4, I get an error This location could not be displayed. Another operation in progress, so I cannot even browse files or - at some point (not sure whether it was at step 4 above or when ejecting the phone) something CRASHES (I get the usual Ubuntu message informing me of that). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth (not installed) ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Mon Feb 24 21:24:05 2014 InstallationDate: Installed on 2013-10-11 (136 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Acer Aspire V3-571G MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago) dmi.bios.date: 10/15/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.07 dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07: dmi.product.name: Aspire V3-571G dmi.product.version: V2.07 dmi.sys.vendor: Acer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: A4:17:31:0D:4A:70 ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:44318 acl:198 sco:0 events:355 errors:0 TX bytes:6132 acl:178 sco:0 commands:82 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1284308/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1347272] Re: Several XFCE applications appear unresponsive after communicating with a daemon
@mspacek The unity-gtk-module packages are the trouble makers in this particular case, per the UBUNTU_MENUPROXY should not be set in Xfce bug. But that's only half the problem and having those loaded in Xfce causes other problems. The late fork() problems can potentially be triggered by other bugs also, so both these bugs need to be independently fixed. As such, I've unset the duplicate. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to policykit-1 in Ubuntu. https://bugs.launchpad.net/bugs/1347272 Title: Several XFCE applications appear unresponsive after communicating with a daemon Status in One Hundred Papercuts: Triaged Status in System policy: Confirmed Status in Thunar file manager: Confirmed Status in xfce4-appfinder: Confirmed Status in Xfce4 Power Manager: Confirmed Status in xfce4-settings: Fix Released Status in Volume management daemon for Xfce: Confirmed Status in “policykit-1” package in Ubuntu: Triaged Status in “thunar” package in Ubuntu: Triaged Status in “xfce4-appfinder” package in Ubuntu: Triaged Status in “xfce4-power-manager” package in Ubuntu: Triaged Status in “xfce4-settings” package in Ubuntu: Triaged Status in “xfce4-volumed” package in Ubuntu: Triaged Bug description: Several programs in Xfce have a daemon mode call gtk_init() before fork()ing. This is unsafe, and when it goes wrong this will typically manifest as the daemon hanging shortly after forking, and appearing to simply do nothing at all. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1347272/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1347272] Re: Several XFCE applications appear irresponsible after communicating with a daemon
Hi Alberto, Thanks for compiling all this information. There's a couple of pieces missing though. This bug doesn't happen as far as I know with vanilla Gtk. It happens when the Unity Gtk extensions (dbusmenu and overlay scrollbar) are loaded. They are Gtk plugins and one or both of them open dbus connections as soon as they are loaded. They are loaded at Gtk init and that dbus connection becomes invalid after the fork, but Gtk tries to reuse it anyway. That causes it to hang. As a result of the above, this bug only happens if you have Unity installed alongside the affected software eg Xfce. So a good way to spot duplicates is to ask if the user also has Unity installed if they are not using it. Another thing is that those Gtk extensions should not be loaded at all outside of Unity. There is a bug about that: https://bugs.launchpad.net/ubuntu/+source/xfce4-indicator- plugin/+bug/1307657 Finally, we don't have a metabug like this upstream at Xfce because bugzilla is not good at handling those types of bugs, but we are aware of the issue and there is a thread on the mailing list about it. https://mail.xfce.org/pipermail/xfce4-dev/2014-May/030715.html The conclusion we reached is that even though this is ultimately caused by Unity extensions, each application should be fixed to fork *before* it calls Gtk init, because you never know what extra plugins might get loaded and subsequently break. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to policykit-1 in Ubuntu. https://bugs.launchpad.net/bugs/1347272 Title: Several XFCE applications appear irresponsible after communicating with a daemon Status in pixbuf library for gtk+: New Status in One Hundred Papercuts: Triaged Status in System policy: Confirmed Status in Thunar file manager: Confirmed Status in xfce4-appfinder: Confirmed Status in Xfce4 Power Manager: Confirmed Status in xfce4-settings: Fix Released Status in Volume management daemon for XFCE 4: Invalid Status in Volume management daemon for Xfce: Confirmed Status in “gdk-pixbuf” package in Ubuntu: Triaged Status in “policykit-1” package in Ubuntu: Triaged Status in “thunar” package in Ubuntu: Triaged Status in “xfce4-appfinder” package in Ubuntu: Triaged Status in “xfce4-power-manager” package in Ubuntu: Triaged Status in “xfce4-settings” package in Ubuntu: Triaged Status in “xfce4-volumed” package in Ubuntu: Triaged Bug description: Several programs in Xfce have a daemon mode call gtk_init() before fork()ing. This is unsafe, and when it goes wrong this will typically manifest as the daemon hanging shortly after forking, and appearing to simply do nothing at all. To manage notifications about this bug go to: https://bugs.launchpad.net/gdk-pixbuf/+bug/1347272/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1283615] Re: xrandr layouts shouldn't be changed on nvidia-tool custom config
No, that's not correct at all. g-s-d/u-s-d do not run in Xubuntu, however, they do run in the greeter if the greeter is unity-greeter. They exit before Xubuntu desktop starts up, but at that point they have already ruined the monitor configuration. Since they do not run in Xubuntu, there is no way to configure them. I can use randr to set up my displays, but it won't be saved to g-s-d because g-s-d is not running. This is true regardless of what graphics card I use. This is not a feature request to detect custom nvidia configs, it is a feature request to not stomp all over the standard interface for configuring Xorg, which is Xorg.conf. Setting the bug name back to the original for this reason. ** Summary changed: - xrandr layouts shouldn't be changed on nvidia-tool custom config + gnome-settings-daemon trashes monitor config -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1283615 Title: gnome-settings-daemon trashes monitor config Status in “gnome-settings-daemon” package in Ubuntu: Confirmed Status in “unity-greeter” package in Ubuntu: Invalid Status in “unity-settings-daemon” package in Ubuntu: Confirmed Bug description: This is actually a bug in unity-settings-daemon and gnome-settings- daemon. To reproduce: 1. Have Nvidia multimonitor layout. 2. Position the monitors however you want. 3. Run g-s-d or u-s-d. Expected result: Monitor layout does not change. Actual result: Monitor layout is reset to default. Original description: To reproduce: 1. Have a multimonitor set up with nvidia 2. Position the monitors however you like. 3. Save the positions to xorg.conf 4. Log out Expected result: the configured monitor positions are used at the login screen. Actual result: the monitor positions are all reset to default, and this configuration persists past login, forcing the user to reconfigure monitor positioning after each login. Impact: When I boot up my computer with unity-greeter I see what is shown in the photo, regardless of how I attempt to configure the monitor layout. This bug does not affect lightdm-gtk-greeter or lightdm-webkit- greeter, which both correctly honour the Xorg configuration. This is also a regression, unity-greeter honoured the layout in 13.10. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-greeter 14.04.3-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.13.2-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Sun Feb 23 00:57:58 2014 InstallationDate: Installed on 2014-02-11 (11 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) SourcePackage: unity-greeter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1283615/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1283615] Re: gnome-settings-daemon trashes monitor config
Also, if you do for some reason run g-s-d in Xubuntu desktop, it will reset your monitor configuration to defaults. This bug appears to run deeper than just Xubuntu and nvidia, see for example: http://bernaerts.dyndns.org/linux/74-ubuntu/309-ubuntu-dual- display-monitor-position-lost The solution is simple: if g-s-d cannot find a monitors.xml it should leave the display configuration alone. There is no reason to care about any other configuation mechanism the user might or might not be using. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1283615 Title: gnome-settings-daemon trashes monitor config Status in “gnome-settings-daemon” package in Ubuntu: Confirmed Status in “unity-greeter” package in Ubuntu: Invalid Status in “unity-settings-daemon” package in Ubuntu: Confirmed Bug description: This is actually a bug in unity-settings-daemon and gnome-settings- daemon. To reproduce: 1. Have Nvidia multimonitor layout. 2. Position the monitors however you want. 3. Run g-s-d or u-s-d. Expected result: Monitor layout does not change. Actual result: Monitor layout is reset to default. Original description: To reproduce: 1. Have a multimonitor set up with nvidia 2. Position the monitors however you like. 3. Save the positions to xorg.conf 4. Log out Expected result: the configured monitor positions are used at the login screen. Actual result: the monitor positions are all reset to default, and this configuration persists past login, forcing the user to reconfigure monitor positioning after each login. Impact: When I boot up my computer with unity-greeter I see what is shown in the photo, regardless of how I attempt to configure the monitor layout. This bug does not affect lightdm-gtk-greeter or lightdm-webkit- greeter, which both correctly honour the Xorg configuration. This is also a regression, unity-greeter honoured the layout in 13.10. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-greeter 14.04.3-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.13.2-0ubuntu5 Architecture: amd64 CurrentDesktop: XFCE Date: Sun Feb 23 00:57:58 2014 InstallationDate: Installed on 2014-02-11 (11 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) SourcePackage: unity-greeter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1283615/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320450] Re: page up/page down/home/end don't work properly in firefox 29
I worked around this problem by wiping my firefox profile completely. Safe mode did not help, only completely wiping the profile. ** Changed in: firefox (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1320450 Title: page up/page down/home/end don't work properly in firefox 29 Status in “firefox” package in Ubuntu: Invalid Bug description: To reproduce: 1. Go to youtube.com (logged in or not, doesn't matter.) 2. Press page down: nothing happens. 3. Click the grey background of the page. 3. Press page down: you go instantly to the bottom of the page. 4. Press page up a few times: you are stuck at the bottom. 5. Press home/end: they don't work at all. This bug is not only limited to youtube.com, it happens on many websites. It is not something that I ever noticed with Firefox 28 and earlier. I have reproduced the bug in safe mode. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: firefox 29.0+build1-0ubuntu0.14.04.2 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: nvidia AddonCompatCheckDisabled: False ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: al 2261 F pulseaudio /dev/snd/controlC1: al 2261 F pulseaudio /dev/snd/controlC0: al 2261 F pulseaudio BuildID: 20140428193813 Channel: Unavailable CurrentDesktop: XFCE Date: Sat May 17 10:17:07 2014 ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: English (GB) Language Pack - langpack-en...@firefox.mozilla.org English (South Africa) Language Pack - langpack-en...@firefox.mozilla.org Default - {972ce4c6-7e08-4474-a285-3208198ce6fd} InstallationDate: Installed on 2014-02-11 (94 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) IpRoute: default via 192.168.0.1 dev eth0 proto static 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.5 metric 1 MostRecentCrashID: bp-7358c5d0-44ec-414f-98ab-e1cb92131216 PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js Profiles: Profile0 (Default) - LastVersion=29.0/20140428193813 RelatedPackageVersions: rhythmbox-mozilla 3.0.2-0ubuntu2 totem-mozilla 3.10.1-1ubuntu4 RunningIncompatibleAddons: True SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0704 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: M4A79XTD EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0X dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0704:bd11/25/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A79XTDEVO:rvrRevX.0X:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1320450/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp