[Desktop-packages] [Bug 1084804] Re: BCM4331 was quite hard to get working
*** This bug is a duplicate of bug 912941 *** https://bugs.launchpad.net/bugs/912941 ** This bug has been marked a duplicate of bug 912941 Broadcom 4331 is not supported -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to jockey in Ubuntu. https://bugs.launchpad.net/bugs/1084804 Title: BCM4331 was quite hard to get working Status in “b43-fwcutter” package in Ubuntu: New Status in “jockey” package in Ubuntu: New Status in “linux-firmware-nonfree” package in Ubuntu: New Bug description: I have 12.04 on a macbook pro 8,2; to run bcm4331 i used all methods on https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx . Getting b43-fwcutter from software center didn't work; so I tried the no internet access method and got the *.deb package from a 10.04 cd. This didn't work either so after hours on #ubuntu IRC i found another *.deb package; which accepted the propreiatery firmware from broadcom. I'm not sure if this is a bug, only filing this cause https://launchpad.net/~josephjamesmills suggested i should. Hope it helps. jockey-gtk (jockey-gtk:2519): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed (jockey-gtk:2519): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed dmesg | grep -e bcma -e wlan -e eth -e b43 [3.079077] i2c-core: driver [aat2870] using legacy suspend method [3.079079] i2c-core: driver [aat2870] using legacy resume method [5.275917] tg3 :02:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:1f:d6:e5 [5.275921] tg3 :02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [5.275923] tg3 :02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [5.275924] tg3 :02:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [9.828593] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.145719] bcma-pci-bridge :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 13.145733] bcma-pci-bridge :03:00.0: setting latency timer to 64 [ 13.145795] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 13.145823] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 13.145885] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 13.146027] bcma: PMU resource config unknown for device 0x4331 [ 13.216020] bcma: Bus registered [ 15.212877] ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached [ 15.212890] usbcore: registered new interface driver ipheth [ 15.684771] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 24.252201] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.252932] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.364110] b43-phy0 ERROR: Firmware file b43/ucode29_mimo.fw not found [ 24.364113] b43-phy0 ERROR: Firmware file b43-open/ucode29_mimo.fw not found [ 24.364115] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 24.364231] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.685636] eth1: no IPv6 routers present [ 73.412770] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 87.870842] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 97.978167] eth1: no IPv6 routers present [ 413.798660] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 417.269597] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 427.479302] eth1: no IPv6 routers present [ 620.605656] b43-phy1: Broadcom 4331 WLAN found (core revision 29) [ 620.616316] b43-phy1 ERROR: Firmware file b43/ucode29_mimo.fw not found [ 620.616330] b43-phy1 ERROR: Firmware file b43-open/ucode29_mimo.fw not found [ 620.616332] b43-phy1 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 620.616453] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1605.704612] bcma-pci-bridge :03:00.0: PCI INT A disabled [ 1762.473427] bcma-pci-bridge :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 1762.473462] bcma-pci-bridge :03:00.0: setting latency timer to 64 [ 1762.473610] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 1762.473642] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 1762.473704] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 1762.473844] bcma: PMU resource config unknown for device 0x4331 [ 1762.482891] bcma: Bus registered [ 1762.500611] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 1762.518681] b43-phy0
[Desktop-packages] [Bug 1084804] Re: BCM4331 was quite hard to get working
even after installing linux-firmware-nonfree and firmware-b43-installer It was still not getting all firmware that was needed. Irc conversation happens on November 29th 2012 maybe this should be moved to jockey-gtk or to linux-firmware-nonfree and firmware-b43-installer ** Also affects: linux-firmware-nonfree (Ubuntu) Importance: Undecided Status: New ** Also affects: jockey (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to jockey in Ubuntu. https://bugs.launchpad.net/bugs/1084804 Title: BCM4331 was quite hard to get working Status in “b43-fwcutter” package in Ubuntu: New Status in “jockey” package in Ubuntu: New Status in “linux-firmware-nonfree” package in Ubuntu: New Bug description: I have 12.04 on a macbook pro 8,2; to run bcm4331 i used all methods on https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx . Getting b43-fwcutter from software center didn't work; so I tried the no internet access method and got the *.deb package from a 10.04 cd. This didn't work either so after hours on #ubuntu IRC i found another *.deb package; which accepted the propreiatery firmware from broadcom. I'm not sure if this is a bug, only filing this cause https://launchpad.net/~josephjamesmills suggested i should. Hope it helps. jockey-gtk (jockey-gtk:2519): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed (jockey-gtk:2519): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed dmesg | grep -e bcma -e wlan -e eth -e b43 [3.079077] i2c-core: driver [aat2870] using legacy suspend method [3.079079] i2c-core: driver [aat2870] using legacy resume method [5.275917] tg3 :02:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:1f:d6:e5 [5.275921] tg3 :02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [5.275923] tg3 :02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [5.275924] tg3 :02:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [9.828593] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.145719] bcma-pci-bridge :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 13.145733] bcma-pci-bridge :03:00.0: setting latency timer to 64 [ 13.145795] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 13.145823] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 13.145885] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 13.146027] bcma: PMU resource config unknown for device 0x4331 [ 13.216020] bcma: Bus registered [ 15.212877] ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached [ 15.212890] usbcore: registered new interface driver ipheth [ 15.684771] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 24.252201] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.252932] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.364110] b43-phy0 ERROR: Firmware file b43/ucode29_mimo.fw not found [ 24.364113] b43-phy0 ERROR: Firmware file b43-open/ucode29_mimo.fw not found [ 24.364115] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 24.364231] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.685636] eth1: no IPv6 routers present [ 73.412770] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 87.870842] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 97.978167] eth1: no IPv6 routers present [ 413.798660] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 417.269597] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 427.479302] eth1: no IPv6 routers present [ 620.605656] b43-phy1: Broadcom 4331 WLAN found (core revision 29) [ 620.616316] b43-phy1 ERROR: Firmware file b43/ucode29_mimo.fw not found [ 620.616330] b43-phy1 ERROR: Firmware file b43-open/ucode29_mimo.fw not found [ 620.616332] b43-phy1 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 620.616453] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1605.704612] bcma-pci-bridge :03:00.0: PCI INT A disabled [ 1762.473427] bcma-pci-bridge :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 1762.473462] bcma-pci-bridge :03:00.0: setting latency timer to 64 [ 1762.473610] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 1762.473642] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 1762.473704] bcma:
