[RESULT] [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
The voting time has passed, and we now have enough votes. Thank you for testing and voting everyone! I'm happy to announce that we have unanimously approved this candidate as the 2.1.0 release for Apache Flink Stateful Functions. There are 7 approving votes, 3 of which are binding: * Igal Shilman * Congxian Qiu * Hequn Cheng (binding) * Tzu-Li (Gordon) Tai (binding) * Yu Li * Robert Metzger (binding) * Matt Wang There are no disapproving notes. The announcements for the release will happen in a separate thread once all released artifacts are available. Cheers, Gordon On Sat, Jun 6, 2020 at 8:34 PM Matt Wang wrote: > +1 (non-binding) > > > - signatures & hash, ok > - mvn clean install -Prun-e2e-tests on 1.8.0_77, ok > - source archives do not contains any binaries, ok > - version of POM files and Dockerfiles are correct, ok > > > --- > Best, > Matt Wang > > > On 06/5/2020 16:58，Robert Metzger wrote： > Thanks a lot for creating this release Gordon! > > +1 (binding) > > - maven staging repo looks fine (version tags, license files) > - source archive looks good (no binaries, no unexpected files, pom has > right version) > - quickly checked diff: > > https://github.com/apache/flink-statefun/compare/release-2.0.0-rc6...release-2.1.0-rc1 > > > On Fri, Jun 5, 2020 at 5:05 AM Congxian Qiu > wrote: > > @Tzu-Li (Gordon) Tai Thanks for the info. `mvn > clean > install -Prun=e2e-tests` works for me. before verified demo on a clean > source directory. > > Best, > Congxian > > > Tzu-Li (Gordon) Tai 于2020年6月4日周四 下午6:35写道： > > +1 (binding) > > Legal > > - Verified signatures and hashes of staged Maven artifacts, source > distribution and Python SDK distribution > - Checked NOTICE file of statefun-flink-distribution and > statefun-ridesharing-example-simulator > > Functional > > - Full build with end-to-end-tests, JDK 8: mvn clean install > -Prun-e2e-tests > - Manually verified state TTL for remote functions > - Manually verified checkpointing with failure recovery > - Manually verified savepointing + manual restore > - Generated quickstart project from archetype works > > > On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: > > +1 (binding) > > - Signatures and hash are correct. > - All artifacts to be released to Maven in the staging Nexus > repository. > - Verify that the source archives do not contain any binaries. > - Go through all commits from the last release. No license problem > spotted. > - Check end-to-end tests. All tests have been passed on Travis(both for > JDK > 1.8 and 1.11). > > Best, > Hequn > > On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai < > tzuli...@apache.org > > wrote: > > Hi Hequn, > > Sorry, I mis-tagged the wrong commit. > Just fixed this, the tag [1] [2] should now be pointing to the > correct > commit that contains the updated version. > > Gordon > > [1] > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng > wrote: > > It seems the release tag is not correct? The version in the poms > should > be 2.1.0 instead of 2.1-SNAPSHOT. > > Best, > Hequn > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu < > qcx978132...@gmail.com > > wrote: > > +1 (non-binding) > > maybe there is something that needs to be updated in > README.md(currently > the official docs link points to the master instead of 2.1) > > and have another question: do we need to add the command used to > build > the > base image locally(which was on the README.md in release-2.0.0)? > > checked > - sha & gpg, ok > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > - source archives do not contains any binaries > - maven clean install -Papache-release, ok (this step need a gpg > secret > key) > - check all pom files, dockerfiles, examples point to the same > version, > ok > - check READM.md, nothing unexpected. > - but the official docs link points to the master instead of > 2.1 > - run greeter demo, ok > > Best, > Congxian > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > Hi everyone, > > Please review and vote on the *release candidate #1* for the > version > 2.1.0 > of > Apache Flink Stateful Functions, > as follows: > [ ] +1, Approve the release > [ ] -1, Do not approve the release (please provide specific > comments) > > ***Testing Guideline*** > > You can find here [1] a page in the project wiki on > instructions > for > testing. > To cast a vote, it is not necessary to perform all listed > checks, > but please mention which checks you have performed when voting. > > ***Release Overview*** > > As an overview, the release consists of the following: > a) Stateful Functions canonical source distribution, to be > deployed > to > the > release repository at dist.apache.org > b) Stateful Functions Python SDK distributions to be deployed > to > PyPI > c) Maven artifacts to be deployed to the Maven Central > Repository > > ***Staging
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (non-binding) - signatures & hash, ok - mvn clean install -Prun-e2e-tests on 1.8.0_77, ok - source archives do not contains any binaries, ok - version of POM files and Dockerfiles are correct, ok --- Best, Matt Wang On 06/5/2020 16:58，Robert Metzger wrote： Thanks a lot for creating this release Gordon! +1 (binding) - maven staging repo looks fine (version tags, license files) - source archive looks good (no binaries, no unexpected files, pom has right version) - quickly checked diff: https://github.com/apache/flink-statefun/compare/release-2.0.0-rc6...release-2.1.0-rc1 On Fri, Jun 5, 2020 at 5:05 AM Congxian Qiu wrote: @Tzu-Li (Gordon) Tai Thanks for the info. `mvn clean install -Prun=e2e-tests` works for me. before verified demo on a clean source directory. Best, Congxian Tzu-Li (Gordon) Tai 于2020年6月4日周四 下午6:35写道： +1 (binding) Legal - Verified signatures and hashes of staged Maven artifacts, source distribution and Python SDK distribution - Checked NOTICE file of statefun-flink-distribution and statefun-ridesharing-example-simulator Functional - Full build with end-to-end-tests, JDK 8: mvn clean install -Prun-e2e-tests - Manually verified state TTL for remote functions - Manually verified checkpointing with failure recovery - Manually verified savepointing + manual restore - Generated quickstart project from archetype works On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: +1 (binding) - Signatures and hash are correct. - All artifacts to be released to Maven in the staging Nexus repository. - Verify that the source archives do not contain any binaries. - Go through all commits from the last release. No license problem spotted. - Check end-to-end tests. All tests have been passed on Travis(both for JDK 1.8 and 1.11). Best, Hequn On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai < tzuli...@apache.org wrote: Hi Hequn, Sorry, I mis-tagged the wrong commit. Just fixed this, the tag [1] [2] should now be pointing to the correct commit that contains the updated version. Gordon [1] https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: It seems the release tag is not correct? The version in the poms should be 2.1.0 instead of 2.1-SNAPSHOT. Best, Hequn On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu < qcx978132...@gmail.com wrote: +1 (non-binding) maybe there is something that needs to be updated in README.md(currently the official docs link points to the master instead of 2.1) and have another question: do we need to add the command used to build the base image locally(which was on the README.md in release-2.0.0)? checked - sha & gpg, ok - mvn clean install -Prun-e2e-test on 1.8.0_252, ok - source archives do not contains any binaries - maven clean install -Papache-release, ok (this step need a gpg secret key) - check all pom files, dockerfiles, examples point to the same version, ok - check READM.md, nothing unexpected. - but the official docs link points to the master instead of 2.1 - run greeter demo, ok Best, Congxian Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： Hi everyone, Please review and vote on the *release candidate #1* for the version 2.1.0 of Apache Flink Stateful Functions, as follows: [ ] +1, Approve the release [ ] -1, Do not approve the release (please provide specific comments) ***Testing Guideline*** You can find here [1] a page in the project wiki on instructions for testing. To cast a vote, it is not necessary to perform all listed checks, but please mention which checks you have performed when voting. ***Release Overview*** As an overview, the release consists of the following: a) Stateful Functions canonical source distribution, to be deployed to the release repository at dist.apache.org b) Stateful Functions Python SDK distributions to be deployed to PyPI c) Maven artifacts to be deployed to the Maven Central Repository ***Staging Areas to Review*** The staging areas containing the above mentioned artifacts are as follows, for your review: * All artifacts for a) and b) can be found in the corresponding dev repository at dist.apache.org [2] * All artifacts for c) can be found at the Apache Nexus Repository [3] All artifacts are singed with the key 1C1E2394D3194E1944613488F320986D35C33D6A [4] Other links for your review: * JIRA release notes [5] * source code tag "release-2.1.0-rc1" [6] [7] ***Vote Duration*** The vote will be open for at least 72 hours *(target end date is Wednesday, Jun. 3rd).* It is adopted by majority approval, with at least 3 PMC affirmative votes. Thanks, Gordon [1] https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release [2] https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ [3] https://repository.apache.org/content/repositories/orgapacheflink-1373/ [4]
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
Thanks a lot for creating this release Gordon! +1 (binding) - maven staging repo looks fine (version tags, license files) - source archive looks good (no binaries, no unexpected files, pom has right version) - quickly checked diff: https://github.com/apache/flink-statefun/compare/release-2.0.0-rc6...release-2.1.0-rc1 On Fri, Jun 5, 2020 at 5:05 AM Congxian Qiu wrote: > @Tzu-Li (Gordon) Tai Thanks for the info. `mvn > clean > install -Prun=e2e-tests` works for me. before verified demo on a clean > source directory. > > Best, > Congxian > > > Tzu-Li (Gordon) Tai 于2020年6月4日周四 下午6:35写道： > > > +1 (binding) > > > > Legal > > > > - Verified signatures and hashes of staged Maven artifacts, source > > distribution and Python SDK distribution > > - Checked NOTICE file of statefun-flink-distribution and > > statefun-ridesharing-example-simulator > > > > Functional > > > > - Full build with end-to-end-tests, JDK 8: mvn clean install > > -Prun-e2e-tests > > - Manually verified state TTL for remote functions > > - Manually verified checkpointing with failure recovery > > - Manually verified savepointing + manual restore > > - Generated quickstart project from archetype works > > > > > > On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: > > > > > +1 (binding) > > > > > > - Signatures and hash are correct. > > > - All artifacts to be released to Maven in the staging Nexus > repository. > > > - Verify that the source archives do not contain any binaries. > > > - Go through all commits from the last release. No license problem > > spotted. > > > - Check end-to-end tests. All tests have been passed on Travis(both for > > JDK > > > 1.8 and 1.11). > > > > > > Best, > > > Hequn > > > > > > On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai < > tzuli...@apache.org > > > > > > wrote: > > > > > > > Hi Hequn, > > > > > > > > Sorry, I mis-tagged the wrong commit. > > > > Just fixed this, the tag [1] [2] should now be pointing to the > correct > > > > commit that contains the updated version. > > > > > > > > Gordon > > > > > > > > [1] > > > > > > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > > > > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > > > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng > wrote: > > > > > > > > > It seems the release tag is not correct? The version in the poms > > should > > > > > be 2.1.0 instead of 2.1-SNAPSHOT. > > > > > > > > > > Best, > > > > > Hequn > > > > > > > > > > > > > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu < > qcx978132...@gmail.com > > > > > > > > wrote: > > > > > > > > > > > +1 (non-binding) > > > > > > > > > > > > maybe there is something that needs to be updated in > > > > README.md(currently > > > > > > the official docs link points to the master instead of 2.1) > > > > > > > > > > > > and have another question: do we need to add the command used to > > > build > > > > > the > > > > > > base image locally(which was on the README.md in release-2.0.0)? > > > > > > > > > > > > checked > > > > > > - sha & gpg, ok > > > > > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > > > > > - source archives do not contains any binaries > > > > > > - maven clean install -Papache-release, ok (this step need a gpg > > > secret > > > > > > key) > > > > > > - check all pom files, dockerfiles, examples point to the same > > > version, > > > > > ok > > > > > > - check READM.md, nothing unexpected. > > > > > > - but the official docs link points to the master instead of > > 2.1 > > > > > > - run greeter demo, ok > > > > > > > > > > > > Best, > > > > > > Congxian > > > > > > > > > > > > > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > > > > > > > > > Hi everyone, > > > > > > > > > > > > > > Please review and vote on the *release candidate #1* for the > > > version > > > > > > 2.1.0 > > > > > > > of > > > > > > > Apache Flink Stateful Functions, > > > > > > > as follows: > > > > > > > [ ] +1, Approve the release > > > > > > > [ ] -1, Do not approve the release (please provide specific > > > comments) > > > > > > > > > > > > > > ***Testing Guideline*** > > > > > > > > > > > > > > You can find here [1] a page in the project wiki on > instructions > > > for > > > > > > > testing. > > > > > > > To cast a vote, it is not necessary to perform all listed > checks, > > > > > > > but please mention which checks you have performed when voting. > > > > > > > > > > > > > > ***Release Overview*** > > > > > > > > > > > > > > As an overview, the release consists of the following: > > > > > > > a) Stateful Functions canonical source distribution, to be > > deployed > > > > to > > > > > > the > > > > > > > release repository at dist.apache.org > > > > > > > b) Stateful Functions Python SDK distributions to be deployed > to > > > PyPI > > > > > > > c) Maven artifacts to be deployed to the Maven Central > Repository > > > > > > > > > > > > > > ***Staging Areas to Review*** > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
@Tzu-Li (Gordon) Tai Thanks for the info. `mvn clean install -Prun=e2e-tests` works for me. before verified demo on a clean source directory. Best, Congxian Tzu-Li (Gordon) Tai 于2020年6月4日周四 下午6:35写道： > +1 (binding) > > Legal > > - Verified signatures and hashes of staged Maven artifacts, source > distribution and Python SDK distribution > - Checked NOTICE file of statefun-flink-distribution and > statefun-ridesharing-example-simulator > > Functional > > - Full build with end-to-end-tests, JDK 8: mvn clean install > -Prun-e2e-tests > - Manually verified state TTL for remote functions > - Manually verified checkpointing with failure recovery > - Manually verified savepointing + manual restore > - Generated quickstart project from archetype works > > > On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: > > > +1 (binding) > > > > - Signatures and hash are correct. > > - All artifacts to be released to Maven in the staging Nexus repository. > > - Verify that the source archives do not contain any binaries. > > - Go through all commits from the last release. No license problem > spotted. > > - Check end-to-end tests. All tests have been passed on Travis(both for > JDK > > 1.8 and 1.11). > > > > Best, > > Hequn > > > > On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai > > > wrote: > > > > > Hi Hequn, > > > > > > Sorry, I mis-tagged the wrong commit. > > > Just fixed this, the tag [1] [2] should now be pointing to the correct > > > commit that contains the updated version. > > > > > > Gordon > > > > > > [1] > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > > > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > > > > > > > It seems the release tag is not correct? The version in the poms > should > > > > be 2.1.0 instead of 2.1-SNAPSHOT. > > > > > > > > Best, > > > > Hequn > > > > > > > > > > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > > > > > wrote: > > > > > > > > > +1 (non-binding) > > > > > > > > > > maybe there is something that needs to be updated in > > > README.md(currently > > > > > the official docs link points to the master instead of 2.1) > > > > > > > > > > and have another question: do we need to add the command used to > > build > > > > the > > > > > base image locally(which was on the README.md in release-2.0.0)? > > > > > > > > > > checked > > > > > - sha & gpg, ok > > > > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > > > > - source archives do not contains any binaries > > > > > - maven clean install -Papache-release, ok (this step need a gpg > > secret > > > > > key) > > > > > - check all pom files, dockerfiles, examples point to the same > > version, > > > > ok > > > > > - check READM.md, nothing unexpected. > > > > > - but the official docs link points to the master instead of > 2.1 > > > > > - run greeter demo, ok > > > > > > > > > > Best, > > > > > Congxian > > > > > > > > > > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > > > > > > > Hi everyone, > > > > > > > > > > > > Please review and vote on the *release candidate #1* for the > > version > > > > > 2.1.0 > > > > > > of > > > > > > Apache Flink Stateful Functions, > > > > > > as follows: > > > > > > [ ] +1, Approve the release > > > > > > [ ] -1, Do not approve the release (please provide specific > > comments) > > > > > > > > > > > > ***Testing Guideline*** > > > > > > > > > > > > You can find here [1] a page in the project wiki on instructions > > for > > > > > > testing. > > > > > > To cast a vote, it is not necessary to perform all listed checks, > > > > > > but please mention which checks you have performed when voting. > > > > > > > > > > > > ***Release Overview*** > > > > > > > > > > > > As an overview, the release consists of the following: > > > > > > a) Stateful Functions canonical source distribution, to be > deployed > > > to > > > > > the > > > > > > release repository at dist.apache.org > > > > > > b) Stateful Functions Python SDK distributions to be deployed to > > PyPI > > > > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > > > > > > > ***Staging Areas to Review*** > > > > > > > > > > > > The staging areas containing the above mentioned artifacts are as > > > > > follows, > > > > > > for your review: > > > > > > * All artifacts for a) and b) can be found in the corresponding > dev > > > > > > repository at dist.apache.org [2] > > > > > > * All artifacts for c) can be found at the Apache Nexus > Repository > > > [3] > > > > > > > > > > > > All artifacts are singed with the > > > > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > > > > > > > Other links for your review: > > > > > > * JIRA release notes [5] > > > > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > > > > > > > ***Vote Duration*** > > > > > > > > > > > > The vote will be open for at least 72
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (non-binding) Checked sums and signatures: OK Checked no binaries in source distribution: OK Checked RAT and end-to-end tests (8u101): OK Checked version in pom/README/setup.py files: OK Best Regards, Yu On Thu, 4 Jun 2020 at 18:35, Tzu-Li (Gordon) Tai wrote: > +1 (binding) > > Legal > > - Verified signatures and hashes of staged Maven artifacts, source > distribution and Python SDK distribution > - Checked NOTICE file of statefun-flink-distribution and > statefun-ridesharing-example-simulator > > Functional > > - Full build with end-to-end-tests, JDK 8: mvn clean install > -Prun-e2e-tests > - Manually verified state TTL for remote functions > - Manually verified checkpointing with failure recovery > - Manually verified savepointing + manual restore > - Generated quickstart project from archetype works > > > On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: > > > +1 (binding) > > > > - Signatures and hash are correct. > > - All artifacts to be released to Maven in the staging Nexus repository. > > - Verify that the source archives do not contain any binaries. > > - Go through all commits from the last release. No license problem > spotted. > > - Check end-to-end tests. All tests have been passed on Travis(both for > JDK > > 1.8 and 1.11). > > > > Best, > > Hequn > > > > On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai > > > wrote: > > > > > Hi Hequn, > > > > > > Sorry, I mis-tagged the wrong commit. > > > Just fixed this, the tag [1] [2] should now be pointing to the correct > > > commit that contains the updated version. > > > > > > Gordon > > > > > > [1] > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > > > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > > > > > > > It seems the release tag is not correct? The version in the poms > should > > > > be 2.1.0 instead of 2.1-SNAPSHOT. > > > > > > > > Best, > > > > Hequn > > > > > > > > > > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > > > > > wrote: > > > > > > > > > +1 (non-binding) > > > > > > > > > > maybe there is something that needs to be updated in > > > README.md(currently > > > > > the official docs link points to the master instead of 2.1) > > > > > > > > > > and have another question: do we need to add the command used to > > build > > > > the > > > > > base image locally(which was on the README.md in release-2.0.0)? > > > > > > > > > > checked > > > > > - sha & gpg, ok > > > > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > > > > - source archives do not contains any binaries > > > > > - maven clean install -Papache-release, ok (this step need a gpg > > secret > > > > > key) > > > > > - check all pom files, dockerfiles, examples point to the same > > version, > > > > ok > > > > > - check READM.md, nothing unexpected. > > > > > - but the official docs link points to the master instead of > 2.1 > > > > > - run greeter demo, ok > > > > > > > > > > Best, > > > > > Congxian > > > > > > > > > > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > > > > > > > Hi everyone, > > > > > > > > > > > > Please review and vote on the *release candidate #1* for the > > version > > > > > 2.1.0 > > > > > > of > > > > > > Apache Flink Stateful Functions, > > > > > > as follows: > > > > > > [ ] +1, Approve the release > > > > > > [ ] -1, Do not approve the release (please provide specific > > comments) > > > > > > > > > > > > ***Testing Guideline*** > > > > > > > > > > > > You can find here [1] a page in the project wiki on instructions > > for > > > > > > testing. > > > > > > To cast a vote, it is not necessary to perform all listed checks, > > > > > > but please mention which checks you have performed when voting. > > > > > > > > > > > > ***Release Overview*** > > > > > > > > > > > > As an overview, the release consists of the following: > > > > > > a) Stateful Functions canonical source distribution, to be > deployed > > > to > > > > > the > > > > > > release repository at dist.apache.org > > > > > > b) Stateful Functions Python SDK distributions to be deployed to > > PyPI > > > > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > > > > > > > ***Staging Areas to Review*** > > > > > > > > > > > > The staging areas containing the above mentioned artifacts are as > > > > > follows, > > > > > > for your review: > > > > > > * All artifacts for a) and b) can be found in the corresponding > dev > > > > > > repository at dist.apache.org [2] > > > > > > * All artifacts for c) can be found at the Apache Nexus > Repository > > > [3] > > > > > > > > > > > > All artifacts are singed with the > > > > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > > > > > > > Other links for your review: > > > > > > * JIRA release notes [5] > > > > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > > > > > > > ***Vote Duration*** >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (binding) Legal - Verified signatures and hashes of staged Maven artifacts, source distribution and Python SDK distribution - Checked NOTICE file of statefun-flink-distribution and statefun-ridesharing-example-simulator Functional - Full build with end-to-end-tests, JDK 8: mvn clean install -Prun-e2e-tests - Manually verified state TTL for remote functions - Manually verified checkpointing with failure recovery - Manually verified savepointing + manual restore - Generated quickstart project from archetype works On Thu, Jun 4, 2020 at 3:10 PM Hequn Cheng wrote: > +1 (binding) > > - Signatures and hash are correct. > - All artifacts to be released to Maven in the staging Nexus repository. > - Verify that the source archives do not contain any binaries. > - Go through all commits from the last release. No license problem spotted. > - Check end-to-end tests. All tests have been passed on Travis(both for JDK > 1.8 and 1.11). > > Best, > Hequn > > On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai > wrote: > > > Hi Hequn, > > > > Sorry, I mis-tagged the wrong commit. > > Just fixed this, the tag [1] [2] should now be pointing to the correct > > commit that contains the updated version. > > > > Gordon > > > > [1] > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > > > > > It seems the release tag is not correct? The version in the poms should > > > be 2.1.0 instead of 2.1-SNAPSHOT. > > > > > > Best, > > > Hequn > > > > > > > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > > > wrote: > > > > > > > +1 (non-binding) > > > > > > > > maybe there is something that needs to be updated in > > README.md(currently > > > > the official docs link points to the master instead of 2.1) > > > > > > > > and have another question: do we need to add the command used to > build > > > the > > > > base image locally(which was on the README.md in release-2.0.0)? > > > > > > > > checked > > > > - sha & gpg, ok > > > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > > > - source archives do not contains any binaries > > > > - maven clean install -Papache-release, ok (this step need a gpg > secret > > > > key) > > > > - check all pom files, dockerfiles, examples point to the same > version, > > > ok > > > > - check READM.md, nothing unexpected. > > > > - but the official docs link points to the master instead of 2.1 > > > > - run greeter demo, ok > > > > > > > > Best, > > > > Congxian > > > > > > > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > > > > > Hi everyone, > > > > > > > > > > Please review and vote on the *release candidate #1* for the > version > > > > 2.1.0 > > > > > of > > > > > Apache Flink Stateful Functions, > > > > > as follows: > > > > > [ ] +1, Approve the release > > > > > [ ] -1, Do not approve the release (please provide specific > comments) > > > > > > > > > > ***Testing Guideline*** > > > > > > > > > > You can find here [1] a page in the project wiki on instructions > for > > > > > testing. > > > > > To cast a vote, it is not necessary to perform all listed checks, > > > > > but please mention which checks you have performed when voting. > > > > > > > > > > ***Release Overview*** > > > > > > > > > > As an overview, the release consists of the following: > > > > > a) Stateful Functions canonical source distribution, to be deployed > > to > > > > the > > > > > release repository at dist.apache.org > > > > > b) Stateful Functions Python SDK distributions to be deployed to > PyPI > > > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > > > > > ***Staging Areas to Review*** > > > > > > > > > > The staging areas containing the above mentioned artifacts are as > > > > follows, > > > > > for your review: > > > > > * All artifacts for a) and b) can be found in the corresponding dev > > > > > repository at dist.apache.org [2] > > > > > * All artifacts for c) can be found at the Apache Nexus Repository > > [3] > > > > > > > > > > All artifacts are singed with the > > > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > > > > > Other links for your review: > > > > > * JIRA release notes [5] > > > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > > > > > ***Vote Duration*** > > > > > > > > > > The vote will be open for at least 72 hours *(target end date is > > > > Wednesday, > > > > > Jun. 3rd).* > > > > > It is adopted by majority approval, with at least 3 PMC affirmative > > > > votes. > > > > > > > > > > Thanks, > > > > > Gordon > > > > > > > > > > [1] > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > > > > > [2] > > > > > https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > > > > > [3] > > > > > > > > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (binding) - Signatures and hash are correct. - All artifacts to be released to Maven in the staging Nexus repository. - Verify that the source archives do not contain any binaries. - Go through all commits from the last release. No license problem spotted. - Check end-to-end tests. All tests have been passed on Travis(both for JDK 1.8 and 1.11). Best, Hequn On Thu, Jun 4, 2020 at 12:50 PM Tzu-Li (Gordon) Tai wrote: > Hi Hequn, > > Sorry, I mis-tagged the wrong commit. > Just fixed this, the tag [1] [2] should now be pointing to the correct > commit that contains the updated version. > > Gordon > > [1] > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 > [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > > > It seems the release tag is not correct? The version in the poms should > > be 2.1.0 instead of 2.1-SNAPSHOT. > > > > Best, > > Hequn > > > > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > > wrote: > > > > > +1 (non-binding) > > > > > > maybe there is something that needs to be updated in > README.md(currently > > > the official docs link points to the master instead of 2.1) > > > > > > and have another question: do we need to add the command used to build > > the > > > base image locally(which was on the README.md in release-2.0.0)? > > > > > > checked > > > - sha & gpg, ok > > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > > - source archives do not contains any binaries > > > - maven clean install -Papache-release, ok (this step need a gpg secret > > > key) > > > - check all pom files, dockerfiles, examples point to the same version, > > ok > > > - check READM.md, nothing unexpected. > > > - but the official docs link points to the master instead of 2.1 > > > - run greeter demo, ok > > > > > > Best, > > > Congxian > > > > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > > > Hi everyone, > > > > > > > > Please review and vote on the *release candidate #1* for the version > > > 2.1.0 > > > > of > > > > Apache Flink Stateful Functions, > > > > as follows: > > > > [ ] +1, Approve the release > > > > [ ] -1, Do not approve the release (please provide specific comments) > > > > > > > > ***Testing Guideline*** > > > > > > > > You can find here [1] a page in the project wiki on instructions for > > > > testing. > > > > To cast a vote, it is not necessary to perform all listed checks, > > > > but please mention which checks you have performed when voting. > > > > > > > > ***Release Overview*** > > > > > > > > As an overview, the release consists of the following: > > > > a) Stateful Functions canonical source distribution, to be deployed > to > > > the > > > > release repository at dist.apache.org > > > > b) Stateful Functions Python SDK distributions to be deployed to PyPI > > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > > > ***Staging Areas to Review*** > > > > > > > > The staging areas containing the above mentioned artifacts are as > > > follows, > > > > for your review: > > > > * All artifacts for a) and b) can be found in the corresponding dev > > > > repository at dist.apache.org [2] > > > > * All artifacts for c) can be found at the Apache Nexus Repository > [3] > > > > > > > > All artifacts are singed with the > > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > > > Other links for your review: > > > > * JIRA release notes [5] > > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > > > ***Vote Duration*** > > > > > > > > The vote will be open for at least 72 hours *(target end date is > > > Wednesday, > > > > Jun. 3rd).* > > > > It is adopted by majority approval, with at least 3 PMC affirmative > > > votes. > > > > > > > > Thanks, > > > > Gordon > > > > > > > > [1] > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > > > > [2] > > > https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > > > > [3] > > > > > > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > > > > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > > > > [5] > > > > > > > > > > > > > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > > > > [6] > > > > > > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > > > > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > > > > > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
Hi Hequn, Sorry, I mis-tagged the wrong commit. Just fixed this, the tag [1] [2] should now be pointing to the correct commit that contains the updated version. Gordon [1] https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=c08c9850147d818fc8fed877a01ff87021f3cf21 [2] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > It seems the release tag is not correct? The version in the poms should > be 2.1.0 instead of 2.1-SNAPSHOT. > > Best, > Hequn > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > wrote: > > > +1 (non-binding) > > > > maybe there is something that needs to be updated in README.md(currently > > the official docs link points to the master instead of 2.1) > > > > and have another question: do we need to add the command used to build > the > > base image locally(which was on the README.md in release-2.0.0)? > > > > checked > > - sha & gpg, ok > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > - source archives do not contains any binaries > > - maven clean install -Papache-release, ok (this step need a gpg secret > > key) > > - check all pom files, dockerfiles, examples point to the same version, > ok > > - check READM.md, nothing unexpected. > > - but the official docs link points to the master instead of 2.1 > > - run greeter demo, ok > > > > Best, > > Congxian > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > Hi everyone, > > > > > > Please review and vote on the *release candidate #1* for the version > > 2.1.0 > > > of > > > Apache Flink Stateful Functions, > > > as follows: > > > [ ] +1, Approve the release > > > [ ] -1, Do not approve the release (please provide specific comments) > > > > > > ***Testing Guideline*** > > > > > > You can find here [1] a page in the project wiki on instructions for > > > testing. > > > To cast a vote, it is not necessary to perform all listed checks, > > > but please mention which checks you have performed when voting. > > > > > > ***Release Overview*** > > > > > > As an overview, the release consists of the following: > > > a) Stateful Functions canonical source distribution, to be deployed to > > the > > > release repository at dist.apache.org > > > b) Stateful Functions Python SDK distributions to be deployed to PyPI > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > ***Staging Areas to Review*** > > > > > > The staging areas containing the above mentioned artifacts are as > > follows, > > > for your review: > > > * All artifacts for a) and b) can be found in the corresponding dev > > > repository at dist.apache.org [2] > > > * All artifacts for c) can be found at the Apache Nexus Repository [3] > > > > > > All artifacts are singed with the > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > Other links for your review: > > > * JIRA release notes [5] > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > ***Vote Duration*** > > > > > > The vote will be open for at least 72 hours *(target end date is > > Wednesday, > > > Jun. 3rd).* > > > It is adopted by majority approval, with at least 3 PMC affirmative > > votes. > > > > > > Thanks, > > > Gordon > > > > > > [1] > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > > > [2] > > https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > > > [3] > > > > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > > > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > > > [5] > > > > > > > > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > > > [6] > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > > > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
@Congxian Qiu You're right, the documentation link in the README currently isn't being updated per release. We should fix that (non-blocker). As for locally building the image: For testing this RC, you would need to build the image locally. That is already done if you built the project using `mvn clean install -Prun=e2e-tests`. The build process builds the image first before running the e2e tests. On Thu, Jun 4, 2020 at 12:10 PM Hequn Cheng wrote: > It seems the release tag is not correct? The version in the poms should > be 2.1.0 instead of 2.1-SNAPSHOT. > > Best, > Hequn > > > On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu > wrote: > > > +1 (non-binding) > > > > maybe there is something that needs to be updated in README.md(currently > > the official docs link points to the master instead of 2.1) > > > > and have another question: do we need to add the command used to build > the > > base image locally(which was on the README.md in release-2.0.0)? > > > > checked > > - sha & gpg, ok > > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > > - source archives do not contains any binaries > > - maven clean install -Papache-release, ok (this step need a gpg secret > > key) > > - check all pom files, dockerfiles, examples point to the same version, > ok > > - check READM.md, nothing unexpected. > > - but the official docs link points to the master instead of 2.1 > > - run greeter demo, ok > > > > Best, > > Congxian > > > > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > > > Hi everyone, > > > > > > Please review and vote on the *release candidate #1* for the version > > 2.1.0 > > > of > > > Apache Flink Stateful Functions, > > > as follows: > > > [ ] +1, Approve the release > > > [ ] -1, Do not approve the release (please provide specific comments) > > > > > > ***Testing Guideline*** > > > > > > You can find here [1] a page in the project wiki on instructions for > > > testing. > > > To cast a vote, it is not necessary to perform all listed checks, > > > but please mention which checks you have performed when voting. > > > > > > ***Release Overview*** > > > > > > As an overview, the release consists of the following: > > > a) Stateful Functions canonical source distribution, to be deployed to > > the > > > release repository at dist.apache.org > > > b) Stateful Functions Python SDK distributions to be deployed to PyPI > > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > > > ***Staging Areas to Review*** > > > > > > The staging areas containing the above mentioned artifacts are as > > follows, > > > for your review: > > > * All artifacts for a) and b) can be found in the corresponding dev > > > repository at dist.apache.org [2] > > > * All artifacts for c) can be found at the Apache Nexus Repository [3] > > > > > > All artifacts are singed with the > > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > > > Other links for your review: > > > * JIRA release notes [5] > > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > > > ***Vote Duration*** > > > > > > The vote will be open for at least 72 hours *(target end date is > > Wednesday, > > > Jun. 3rd).* > > > It is adopted by majority approval, with at least 3 PMC affirmative > > votes. > > > > > > Thanks, > > > Gordon > > > > > > [1] > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > > > [2] > > https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > > > [3] > > > > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > > > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > > > [5] > > > > > > > > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > > > [6] > > > > > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > > > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > > > > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
It seems the release tag is not correct? The version in the poms should be 2.1.0 instead of 2.1-SNAPSHOT. Best, Hequn On Thu, Jun 4, 2020 at 10:33 AM Congxian Qiu wrote: > +1 (non-binding) > > maybe there is something that needs to be updated in README.md(currently > the official docs link points to the master instead of 2.1) > > and have another question: do we need to add the command used to build the > base image locally(which was on the README.md in release-2.0.0)? > > checked > - sha & gpg, ok > - mvn clean install -Prun-e2e-test on 1.8.0_252, ok > - source archives do not contains any binaries > - maven clean install -Papache-release, ok (this step need a gpg secret > key) > - check all pom files, dockerfiles, examples point to the same version, ok > - check READM.md, nothing unexpected. > - but the official docs link points to the master instead of 2.1 > - run greeter demo, ok > > Best, > Congxian > > > Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > > > Hi everyone, > > > > Please review and vote on the *release candidate #1* for the version > 2.1.0 > > of > > Apache Flink Stateful Functions, > > as follows: > > [ ] +1, Approve the release > > [ ] -1, Do not approve the release (please provide specific comments) > > > > ***Testing Guideline*** > > > > You can find here [1] a page in the project wiki on instructions for > > testing. > > To cast a vote, it is not necessary to perform all listed checks, > > but please mention which checks you have performed when voting. > > > > ***Release Overview*** > > > > As an overview, the release consists of the following: > > a) Stateful Functions canonical source distribution, to be deployed to > the > > release repository at dist.apache.org > > b) Stateful Functions Python SDK distributions to be deployed to PyPI > > c) Maven artifacts to be deployed to the Maven Central Repository > > > > ***Staging Areas to Review*** > > > > The staging areas containing the above mentioned artifacts are as > follows, > > for your review: > > * All artifacts for a) and b) can be found in the corresponding dev > > repository at dist.apache.org [2] > > * All artifacts for c) can be found at the Apache Nexus Repository [3] > > > > All artifacts are singed with the > > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > > > Other links for your review: > > * JIRA release notes [5] > > * source code tag "release-2.1.0-rc1" [6] [7] > > > > ***Vote Duration*** > > > > The vote will be open for at least 72 hours *(target end date is > Wednesday, > > Jun. 3rd).* > > It is adopted by majority approval, with at least 3 PMC affirmative > votes. > > > > Thanks, > > Gordon > > > > [1] > > > > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > > [2] > https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > > [3] > > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > > [5] > > > > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > > [6] > > > > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 > > >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (non-binding) maybe there is something that needs to be updated in README.md(currently the official docs link points to the master instead of 2.1) and have another question: do we need to add the command used to build the base image locally(which was on the README.md in release-2.0.0)? checked - sha & gpg, ok - mvn clean install -Prun-e2e-test on 1.8.0_252, ok - source archives do not contains any binaries - maven clean install -Papache-release, ok (this step need a gpg secret key) - check all pom files, dockerfiles, examples point to the same version, ok - check READM.md, nothing unexpected. - but the official docs link points to the master instead of 2.1 - run greeter demo, ok Best, Congxian Tzu-Li (Gordon) Tai 于2020年6月1日周一 下午3:25写道： > Hi everyone, > > Please review and vote on the *release candidate #1* for the version 2.1.0 > of > Apache Flink Stateful Functions, > as follows: > [ ] +1, Approve the release > [ ] -1, Do not approve the release (please provide specific comments) > > ***Testing Guideline*** > > You can find here [1] a page in the project wiki on instructions for > testing. > To cast a vote, it is not necessary to perform all listed checks, > but please mention which checks you have performed when voting. > > ***Release Overview*** > > As an overview, the release consists of the following: > a) Stateful Functions canonical source distribution, to be deployed to the > release repository at dist.apache.org > b) Stateful Functions Python SDK distributions to be deployed to PyPI > c) Maven artifacts to be deployed to the Maven Central Repository > > ***Staging Areas to Review*** > > The staging areas containing the above mentioned artifacts are as follows, > for your review: > * All artifacts for a) and b) can be found in the corresponding dev > repository at dist.apache.org [2] > * All artifacts for c) can be found at the Apache Nexus Repository [3] > > All artifacts are singed with the > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > Other links for your review: > * JIRA release notes [5] > * source code tag "release-2.1.0-rc1" [6] [7] > > ***Vote Duration*** > > The vote will be open for at least 72 hours *(target end date is Wednesday, > Jun. 3rd).* > It is adopted by majority approval, with at least 3 PMC affirmative votes. > > Thanks, > Gordon > > [1] > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > [2] https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > [3] > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > [5] > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > [6] > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 >
Re: [VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
+1 (non binding) * verified hashes * verified signatures * checked that the source distribution doesn't contain any binaries * built with java8 and run e2e tests * built with java11 and run e2e tests * run the dockerized greeter example * run the dockerized python greeter example * run the dockeried python greeter example with a unix domain socket transport. * run the ride-sharing examples with parallelism 10. * created a project with mvn archetype:generate, and validated its content. Cheers, Igal. On Mon, Jun 1, 2020 at 9:25 AM Tzu-Li (Gordon) Tai wrote: > Hi everyone, > > Please review and vote on the *release candidate #1* for the version 2.1.0 > of > Apache Flink Stateful Functions, > as follows: > [ ] +1, Approve the release > [ ] -1, Do not approve the release (please provide specific comments) > > ***Testing Guideline*** > > You can find here [1] a page in the project wiki on instructions for > testing. > To cast a vote, it is not necessary to perform all listed checks, > but please mention which checks you have performed when voting. > > ***Release Overview*** > > As an overview, the release consists of the following: > a) Stateful Functions canonical source distribution, to be deployed to the > release repository at dist.apache.org > b) Stateful Functions Python SDK distributions to be deployed to PyPI > c) Maven artifacts to be deployed to the Maven Central Repository > > ***Staging Areas to Review*** > > The staging areas containing the above mentioned artifacts are as follows, > for your review: > * All artifacts for a) and b) can be found in the corresponding dev > repository at dist.apache.org [2] > * All artifacts for c) can be found at the Apache Nexus Repository [3] > > All artifacts are singed with the > key 1C1E2394D3194E1944613488F320986D35C33D6A [4] > > Other links for your review: > * JIRA release notes [5] > * source code tag "release-2.1.0-rc1" [6] [7] > > ***Vote Duration*** > > The vote will be open for at least 72 hours *(target end date is Wednesday, > Jun. 3rd).* > It is adopted by majority approval, with at least 3 PMC affirmative votes. > > Thanks, > Gordon > > [1] > > https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release > [2] https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ > [3] > https://repository.apache.org/content/repositories/orgapacheflink-1373/ > [4] https://dist.apache.org/repos/dist/release/flink/KEYS > [5] > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 > [6] > > https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e > [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1 >
[VOTE] Apache Flink Stateful Functions 2.1.0, release candidate #1
Hi everyone, Please review and vote on the *release candidate #1* for the version 2.1.0 of Apache Flink Stateful Functions, as follows: [ ] +1, Approve the release [ ] -1, Do not approve the release (please provide specific comments) ***Testing Guideline*** You can find here [1] a page in the project wiki on instructions for testing. To cast a vote, it is not necessary to perform all listed checks, but please mention which checks you have performed when voting. ***Release Overview*** As an overview, the release consists of the following: a) Stateful Functions canonical source distribution, to be deployed to the release repository at dist.apache.org b) Stateful Functions Python SDK distributions to be deployed to PyPI c) Maven artifacts to be deployed to the Maven Central Repository ***Staging Areas to Review*** The staging areas containing the above mentioned artifacts are as follows, for your review: * All artifacts for a) and b) can be found in the corresponding dev repository at dist.apache.org [2] * All artifacts for c) can be found at the Apache Nexus Repository [3] All artifacts are singed with the key 1C1E2394D3194E1944613488F320986D35C33D6A [4] Other links for your review: * JIRA release notes [5] * source code tag "release-2.1.0-rc1" [6] [7] ***Vote Duration*** The vote will be open for at least 72 hours *(target end date is Wednesday, Jun. 3rd).* It is adopted by majority approval, with at least 3 PMC affirmative votes. Thanks, Gordon [1] https://cwiki.apache.org/confluence/display/FLINK/Verifying+a+Flink+Stateful+Functions+Release [2] https://dist.apache.org/repos/dist/dev/flink/flink-statefun-2.1.0-rc1/ [3] https://repository.apache.org/content/repositories/orgapacheflink-1373/ [4] https://dist.apache.org/repos/dist/release/flink/KEYS [5] https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522=12347861 [6] https://gitbox.apache.org/repos/asf?p=flink-statefun.git;a=tag;h=a372c69501b8816609f9e90872b1a1e10ab66e8e [7] https://github.com/apache/flink-statefun/tree/release-2.1.0-rc1
