Re: backend connections life times
On Tue, Jul 6, 2021 at 4:22 PM Stefan Eissing wrote: > > Coming back to this discussion, starting at the head because this has become > a bit nested, I try to summarise: > > Fact: when the client of a proxied http request aborts the connection (as in > causing a c->aborted somehow), mod_proxy_http only react to this when writing > (parts of) a response. The time this takes depends on the responsiveness of > the backend. Long delay can commonly come from invoking an expensive request > (long time to compute) or from a long-running request (as in > server-side-events, SSEs). Right. > > Even disregarding SSEs and opinions about its design, we could reduce > resource waste in our server when we can eliminate those delays. We could let idle connections be handled by the MPM's listener thread instead of holding a worker thread. > > In mod_proxy_wstunnel we have to monitor frontend and backend connection > simultaneously due to the nature of the protocol and there the delay will not > happen. This uses a pollset in 2.4.x and in trunk Yann wrapped that into > ap_proxy_tunnel_* functions. Both trunk and 2.4.x use the same proxy tunneling mechanism/functions since 2.4.48, mod_proxy_wstunnel is now an "empty shell" falling back to mod_proxy_http (which is the one creating and starting the tunnel, only for Upgrade(d) protocols so far). In 2.4.x the tunnel is holding a worker thread for the lifetime of the connections still, while trunk goes one step further by allowing the configuration of an AsyncDelay above which when both client and backend connections are idle their polling is deferred to MPM event by using the mpm_register_poll_callback_timeout hook mechanism (the connections are handled by the registered callback from now). The handler then returns SUSPENDED and the worker thread is given back to the MPM (to take another work like handling a new incoming connection or running the callback that resumes the tunneling loop once the connections are ready, and so on..). > > It seeems that ap_proxy_tunnel_* should be usable in mod_proxy_http as well. It is already, see above. > Especially when waiting for the status line and when streaming the response > body. When the frontend connection is HTTP/1.1... That part is indeed missing, for that we'd need to move the HTTP state tracking and response parsing in a hook/callback run by the tunneling loop for each chunk of request/response data or connection event (possibly different hooks depending on the type of event). > > Alas, for HTTP/2, this will not do the trick since H2 secondary connections > do not really have their own socket for polling. But that is a long-open > issue which needs addressing. Not that easy, but certainly beneficial to have > a PIPE socket pair where H2 main connection and workers can at least notify > each other, if not transfer the actual data over. The tunneling loop needs an fd on both sides for polling, but once any fd triggers (is ready) the loop uses the usual input/output filters chain to read/write the buckets brigade. So possibly two pipes per stream could do it for h2<->h1: - the main connection writes incoming data to istream[1] to make them available for the secondary connection on istream[0] - the secondary connection writes outgoing data to ostream[1] to make them available for the main connection on ostream[0] The advantage of the pipes (over socketpair or else) is that they are available on all platforms and apr_pollset() compatible already. That's two fds per pipe but with the above they could be reused for successive streams, provided all the data have been consumed. With this most of the missing work would be on the main connection side I suppose, writing incoming data as they arrive is probably easy but some kind of listener is needed for the responses on the multiple ostream[0], to multiplex them on the main connection. For istream at least, I don't think we can write raw incoming data as is though, more a tuple like (type, length, data) for each chunk so to be able to pass meta like RST_STREAM or alike. On the h1 / secondary connection side all this becomes kind of transparent, all we need is a pair of core secondary input/output filters able to read from / write to the pipes (eventually extracting and interpreting the tuples as needed), plus small changes here and there to accommodate for ap_get_conn_socket() which could actually be a pipe now. > > Another approach could be to "stutter" the blocking backend reads in > mod_proxy_http with a 5 sec socket timeout or so, only to check > frontend->aborted and read again. That might be a minimum effort approach for > the short term. Like Eric I don't think this can work, we are unlikely to have ->aborted set on read, unless the connection is really reset by peer. So with a half-closed connection we still owe a response to the frontend.. > > Yann, did I get this right? Hopefully I made sense above with the picture of what could/remains-to be
Re: backend connections life times
> Another approach could be to "stutter" the blocking backend reads in > mod_proxy_http with a 5 sec socket timeout or so, only to check > frontend->aborted and read again. That might be a minimum effort approach for > the short term. Unfortunately I don't think you will find frontend->aborted is set in such a case (w HTTP 1.x at least). There is nobody watching while the request is being processed. If you split up the long poll, you still have to do _something_ with the frontend socket to discover it's unusable.
Re: backend connections life times
Coming back to this discussion, starting at the head because this has become a bit nested, I try to summarise: Fact: when the client of a proxied http request aborts the connection (as in causing a c->aborted somehow), mod_proxy_http only react to this when writing (parts of) a response. The time this takes depends on the responsiveness of the backend. Long delay can commonly come from invoking an expensive request (long time to compute) or from a long-running request (as in server-side-events, SSEs). Even disregarding SSEs and opinions about its design, we could reduce resource waste in our server when we can eliminate those delays. In mod_proxy_wstunnel we have to monitor frontend and backend connection simultaneously due to the nature of the protocol and there the delay will not happen. This uses a pollset in 2.4.x and in trunk Yann wrapped that into ap_proxy_tunnel_* functions. It seeems that ap_proxy_tunnel_* should be usable in mod_proxy_http as well. Especially when waiting for the status line and when streaming the response body. When the frontend connection is HTTP/1.1... Alas, for HTTP/2, this will not do the trick since H2 secondary connections do not really have their own socket for polling. But that is a long-open issue which needs addressing. Not that easy, but certainly beneficial to have a PIPE socket pair where H2 main connection and workers can at least notify each other, if not transfer the actual data over. Another approach could be to "stutter" the blocking backend reads in mod_proxy_http with a 5 sec socket timeout or so, only to check frontend->aborted and read again. That might be a minimum effort approach for the short term. Yann, did I get this right? Eric had also the suggestion to only do this on certain content types, but that would not solve slow responsiveness. - Stefan > Am 01.07.2021 um 16:06 schrieb Stefan Eissing : > > > >> Am 01.07.2021 um 14:16 schrieb Yann Ylavic : >> >> On Thu, Jul 1, 2021 at 10:15 AM Stefan Eissing >> wrote: >>> Am 30.06.2021 um 18:01 schrieb Eric Covener : On Wed, Jun 30, 2021 at 11:46 AM Stefan Eissing wrote: > > It looks like we stumbled upon an issue in > https://bz.apache.org/bugzilla/show_bug.cgi?id=65402 which concerns the > life times of our backend connections. > > When a frontend connection causes a backend request and drops, our > backend connection only notifies the loss when it attempts to pass some > data. In normal http response processing, this is not an issue since > response chunks are usually coming in quite frequently. Then the proxied > connection will fail to pass it to an aborted frontend connection and > cleanup will occur. > > However, with such modern shenanigans such as Server Side Events (SSE), > the request is supposed to be long running and will produce body chunks > quite infrequently, like every 30 seconds or so. This leaves our proxy > workers hanging in recv for quite a while and may lead to worker > exhaustion. > > We can say SSE is a bad idea anyway, but that will probably not stop > people from doing such crazy things. > > What other mitigations do we have? > - pthread_kill() will interrupt the recv and probably make it fail > - we can use shorter socket timeouts on backend and check r->connection > status in between > - ??? >> >> Can mod_proxy_http2 do better here? I suppose we lose all >> relationships in h2->h1 and then h1->h2, asking just in case.. > > I have not tested, but my guess is that it goes into a blocking read on the > backend as well, since there is nothing it wants to send when a response body > is incoming. > In trunk the tunnelling side of mod_proxy_http can go async and get called back for activity on either side by asking Event to watch both sockets. >>> >>> >>> How does that work, actually? Do we have an example somewhere? >> >> This is the ap_proxy_tunnel_create() and ap_proxy_tunnel_run() >> called/used by mod_proxy_http for Upgrade(d) protocols. >> >> I'm thinking to improve this interface to have a hook called in >> ap_proxy_transfer_between_connections() with the data being forwarded >> from one side to the other (in/out connection), and the hook could >> decide to let the data pass, or retain them, and/or switch to >> speculative mode, and/or remove/add one side/sense from the pollset, >> or abort, or.. The REALLY_LAST hook would be something like the >> existing ap_proxy_buckets_lifetime_transform(). >> >> The hook(s) would be responsible (each) of their connections' states, >> mod_proxy_http could then be implemented fully async in a callback, >> but I suppose mod_h2 could hook itself there too if it has something >> to care about. > > Just had a glimpse and it looks interesting, not only for "real" backends but > maybe also for handling h2 workers from a main
PROXY_WORKER_FREE and PROXY_WORKER_DRAIN
Hi, Actually those are not used, what was the idea when creating them? Guessing mark the worker as DRAIN (for draining) and later as FREE for reuse..., but how to define a FREE worker? Basically how to be sure it completely drained. Comments? -- Cheers Jean-Frederic
Passed: apache/httpd#1729 (trunk - b0c20e4)
Build Update for apache/httpd - Build: #1729 Status: Passed Duration: 17 mins and 56 secs Commit: b0c20e4 (trunk) Author: Yann Ylavic Message: Trigger ci. git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@1891304 13f79535-47bb-0310-9956-ffa450edef68 View the changeset: https://github.com/apache/httpd/compare/20dd120ce4c0...b0c20e4d1b01 View the full build log and details: https://app.travis-ci.com/github/apache/httpd/builds/231894490?utm_medium=notification_source=email -- You can unsubscribe from build emails from the apache/httpd repository going to https://app.travis-ci.com/account/preferences/unsubscribe?repository=16806660_medium=notification_source=email. Or unsubscribe from *all* email updating your settings at https://app.travis-ci.com/account/preferences/unsubscribe?utm_medium=notification_source=email. Or configure specific recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications.
