Podling Report Reminder - July 2017

[johndament]

Dear podling,

This email was sent by an automated system on behalf of the Apache
Incubator PMC. It is an initial reminder to give you plenty of time to
prepare your quarterly board report.

The board meeting is scheduled for Wed, 19 July 2017, 10:30 am PDT.
The report for your podling will form a part of the Incubator PMC
report. The Incubator PMC requires your report to be submitted 2 weeks
before the board meeting, to allow sufficient time for review and
submission (Wed, July 05).

Please submit your report with sufficient time to allow the Incubator
PMC, and subsequently board members to review and digest. Again, the
very latest you should submit your report is 2 weeks prior to the board
meeting.

Thanks,

The Apache Incubator PMC

Submitting your Report

--

Your report should contain the following:

*   Your project name
*   A brief description of your project, which assumes no knowledge of
the project or necessarily of its field
*   A list of the three most important issues to address in the move
towards graduation.
*   Any issues that the Incubator PMC or ASF Board might wish/need to be
aware of
*   How has the community developed since the last report
*   How has the project developed since the last report.
*   How does the podling rate their own maturity.

This should be appended to the Incubator Wiki page at:

https://wiki.apache.org/incubator/July2017

Note: This is manually populated. You may need to wait a little before
this page is created from a template.

Mentors
---

Mentors should review reports for their project(s) and sign them off on
the Incubator wiki page. Signing off reports shows that you are
following the project - projects that are not signed may raise alarms
for the Incubator PMC.

Incubator PMC

newtmgr with onboard bluetooth chip of raspberry zero W

[Alfred Schilken]

Has anybody the newtmgr working with the onboard bluetooth chip of the 
raspberry pi zero W?

If yes: what are the settings for the blehostd and what is to configure with 
the hci on the linux side?

I think this tiny zero-W-board could be a good gateway for IP to BLE.

Regards
Alf

Re: What are the best config settings to reduce ram usage, so that an app runs in 16 kb with least impact on functionality?

[Alfred Schilken]

@Chris
Yes - if I press the reset button on the microbit it works again for a while.

If I try without resetting it seems not to resolve itself - but maybe I tried 
not long enough - just about 10 times.

Sorry for the late response - I was on vacation :-)

Alf

EDV-Beratung Schilken
alf...@schilken.de
www.schilken.de
mobil: +49 178 1475677

> Am 16.06.2017 um 22:57 schrieb Christopher Collins :
> 
> On Fri, Jun 16, 2017 at 10:08:21PM +0200, Alfred Schilken wrote:
>> BTW:
>> every now and then I get this timeout error:
>> 
>> newtmgr -c ble0c stat ble_gattc
>> Error: Timeout waiting for host <-> controller sync
>> 
>> I’m using a microbit running the blehci, connected via adafruit FT232H with 
>> rts/cts.
> 
> The BLE host (running in newtmgr) thinks the controller is unresponsive.
> I have not seen this happend for a while.  Does the problem eventually
> resolve itself?  Does resetting the controller make the problem go away?
> 
> Chris