Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Mon, 17 Jun 2013 22:10:03 +0200
Juergen Schmidt  wrote:

> Am Freitag, 14. Juni 2013 um 15:43 schrieb Rory O'Farrell:
> > On Fri, 14 Jun 2013 15:24:43 +0200
> > Armin Le Grand  wrote:
> >  
> > > Hi Ricardo,
> > >  
> > > as I already wrote in #122456# I am very surprised how something like  
> > > that can happen. I would be happy to be able to reproduce this. Could  
> > > you give a step-by-step description and infos about machine/system  
> > > running on? Maybe put it directly in the task and write that you canks  
> > > in advance!
> > >  
> > > Sincerely,
> > > Armin
> > >  
> > > On 14.06.2013 15:08, RGB ES wrote:
> > > > Just draw a thick line and see if you can reproduce this
> > > >  
> > > > http://people.apache.org/~rgb-es/Draw-341vs400.png
> > > >  
> > > > On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> > > > misplaced on 4.0. There is also a lot of "noise" when you move an object
> > > > around con 4.0
> > > >  
> > > > http://people.apache.org/~rgb-es/Draw-400noise.png
> > > >  
> > > > This problem is absent on 3.4.1.
> > > >  
> > > > I'm testing the 64 bits Linux build. From the Help → About
> > > >  
> > > > AOO400m2(Build:9701) - Rev. 1491860
> > > > 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
> > > >  
> > > > Refreshing the screen with Ctrl-Shift-R fix the second problem, but not 
> > > > the
> > > > first one. I cannot find any related issue in bugzilla.
> > > >  
> > > > One user on ES forums reported that boxes like font name/size are not
> > > > repainting for him, but I cannot reproduce that.
> > > >  
> > > > Regards
> > > > Ricardo
> > > >  
> > >  
> > > --
> > > ALG
> > >  
> >  
> >  
> > I have just tested this and I'm getting the same effect using AOO 4.0.2 
> > (buld 1489073) on Xubuntu 12.10.  
> please don't use such a version number 4.0.2, we don't have released a 4.0.0 
> yet and it can be very confusing for external readers.

I may have been mistaken; I remembered that as the version number and didn't 
check.  Installing AOO 4 on another machine it said it was 4.0.0-2 during the 
install and perhaps that is what I misremembered.  In any case the build number 
is the significant item. 

>   
> Juergen
> > Also, with a wide line (24pt) the corners of the line away from the green 
> > handles are clipped (bevelled) perhaps by the bounding box of the 
> > selection. Also, draw a rectangle or square using the thick line. The four 
> > lines are offset from the desired position: that is the wide line is being 
> > drawn to one side of the target position, instead of being centred on it, 
> > and the top and left lines are the correct width, but the bottom and right 
> > lines are narrower.
> >  
> > Using the sidepanel, I am only able to alter the line width using the spin 
> > buttons (up/down arrows beside the width selector. I cannot highlight ad 
> > enter a value direct into the line width selector.
> >  
> >  
> > --  
> > Rory O'Farrell 
> >  
> > -
> > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
> > For additional commands, e-mail: dev-h...@openoffice.apache.org
> >  
> >  
> 
> 


-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Juergen Schmidt]

Am Freitag, 14. Juni 2013 um 15:43 schrieb Rory O'Farrell:
> On Fri, 14 Jun 2013 15:24:43 +0200
> Armin Le Grand  wrote:
>  
> > Hi Ricardo,
> >  
> > as I already wrote in #122456# I am very surprised how something like  
> > that can happen. I would be happy to be able to reproduce this. Could  
> > you give a step-by-step description and infos about machine/system  
> > running on? Maybe put it directly in the task and write that you canks  
> > in advance!
> >  
> > Sincerely,
> > Armin
> >  
> > On 14.06.2013 15:08, RGB ES wrote:
> > > Just draw a thick line and see if you can reproduce this
> > >  
> > > http://people.apache.org/~rgb-es/Draw-341vs400.png
> > >  
> > > On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> > > misplaced on 4.0. There is also a lot of "noise" when you move an object
> > > around con 4.0
> > >  
> > > http://people.apache.org/~rgb-es/Draw-400noise.png
> > >  
> > > This problem is absent on 3.4.1.
> > >  
> > > I'm testing the 64 bits Linux build. From the Help → About
> > >  
> > > AOO400m2(Build:9701) - Rev. 1491860
> > > 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
> > >  
> > > Refreshing the screen with Ctrl-Shift-R fix the second problem, but not 
> > > the
> > > first one. I cannot find any related issue in bugzilla.
> > >  
> > > One user on ES forums reported that boxes like font name/size are not
> > > repainting for him, but I cannot reproduce that.
> > >  
> > > Regards
> > > Ricardo
> > >  
> >  
> > --
> > ALG
> >  
>  
>  
> I have just tested this and I'm getting the same effect using AOO 4.0.2 (buld 
> 1489073) on Xubuntu 12.10.  
please don't use such a version number 4.0.2, we don't have released a 4.0.0 
yet and it can be very confusing for external readers.
  
Juergen
> Also, with a wide line (24pt) the corners of the line away from the green 
> handles are clipped (bevelled) perhaps by the bounding box of the selection. 
> Also, draw a rectangle or square using the thick line. The four lines are 
> offset from the desired position: that is the wide line is being drawn to one 
> side of the target position, instead of being centred on it, and the top and 
> left lines are the correct width, but the bottom and right lines are narrower.
>  
> Using the sidepanel, I am only able to alter the line width using the spin 
> buttons (up/down arrows beside the width selector. I cannot highlight ad 
> enter a value direct into the line width selector.
>  
>  
> --  
> Rory O'Farrell 
>  
> -
> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
> For additional commands, e-mail: dev-h...@openoffice.apache.org
>  
>  

Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Fri, 14 Jun 2013 17:06:18 +0200
Armin Le Grand  wrote:

> On 14.06.2013 16:59, Rory O'Farrell wrote:
> > On Fri, 14 Jun 2013 15:41:24 +0100
> > The problem still exists in AOO build 1491860 on Ubuntu, although not on 
> > the Windows version of that build.
> Yes, the commit is r1493078, you will need some patience ;-)
> >
> > Also, on Windows version (same build) the line widths are predetermined, on 
> > the side panel I could find no selection box into which one can enter a 
> > desired line width, or adjust the line width using the up/down arrows. To 
> > test in Windows, I had to use the line width selector on the Toolbar.
> In the Line panel (which you should see) is the Width dropdown. Drop it 
> down to see predefined widths and a input box for custom value.
> HTH!
> >

Got it now, Armin! I was getting the custom line widths, but was working in too 
small a window, so that the input box fell under the window edge.

-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[RGB ES]

2013/6/14 Armin Le Grand 

> Hi Ricrado,
>
> how do I open webm format...?
> Interested because I still look for a good format/tooling to do some
> screencasts for the AOO4.0 feature page ;-)
>

VLC. But be sure to install all codecs first.

I did a clumsy screencast of the sidebar some days ago:

http://youtu.be/L4T1uTn7p0U

I still need to learn how to do those things better...

I used a strange tandem: RecordItNow on top of RecordMyDesktop, setting the
bitrate of it (through RecordItNow UI) to 200. But that only provides
ogv videos that are not accepted by youtube, so I converted the ogv to webm
with VLC, to obtain a video of same quality but something like one third of
its size :)

Regards
Ricardo


>
> Sincerely,
> Armin
>
> On 14.06.2013 16:20, RGB ES wrote:
>
>> 2013/6/14 Armin Le Grand 
>>
>>   Hi Rory,
>>>
>>> Thanks a lot! I can now reproduce, recativated the task and I am on it
>>> ;-)
>>>
>>>  You are fast! While I was submitting a short screencast to the report,
>> you
>> fixed it! Many thanks!!
>>
>> Regards
>> Ricardo
>>
>>
>>
>>
>>  Sincerely,
>>>  Armin
>>>
>>>
>>> On 14.06.2013 15:47, Rory O'Farrell wrote:
>>>
>>>  On Fri, 14 Jun 2013 14:43:22 +0100
 Rory O'Farrell  wrote:

   On Fri, 14 Jun 2013 15:24:43 +0200

> Armin Le Grand  wrote:
>
> Hi Ricardo,
>
>> as I already wrote in #122456# I am very surprised how something like
>> that can happen. I would be happy to be able to reproduce this. Could
>> you give a step-by-step description and infos about machine/system
>> running on? Maybe put it directly in the task and write that you canks
>> in advance!
>>
>> Sincerely,
>>Armin
>>
>> On 14.06.2013 15:08, RGB ES wrote:
>>
>>  Just draw a thick line and see if you can reproduce this
>>>
>>> http://people.apache.org/~rgb-es/Draw-341vs400.png
>>> 
>>> >
>>>
>>>
>>> On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
>>> misplaced on 4.0. There is also a lot of "noise" when you move an
>>> object
>>> around con 4.0
>>>
>>> http://people.apache.org/~rgb-es/Draw-400noise.png
>>> 
>>> >
>>>
>>>
>>> This problem is absent on 3.4.1.
>>>
>>> I'm testing the 64 bits Linux build. From the Help → About
>>>
>>> AOO400m2(Build:9701)  -  Rev. 1491860
>>> 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
>>>
>>> Refreshing the screen with Ctrl-Shift-R fix the second problem, but
>>> not the
>>> first one. I cannot find any related issue in bugzilla.
>>>
>>> One user on ES forums reported that boxes like font name/size are not
>>> repainting for him, but I cannot reproduce that.
>>>
>>> Regards
>>> Ricardo
>>>
>>>   --
>>>
>> ALG
>>
>>  I have just tested this and I'm getting the same effect using AOO
> 4.0.2
> (buld 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the
> corners
> of the line away from the green handles are clipped (bevelled) perhaps
> by
> the bounding box of the selection.  Also, draw a rectangle or square
> using
> the thick line.  The four lines are offset from the desired position:
> that
> is the wide line is being drawn to one side of the target position,
> instead
> of being centred on it, and the top and left lines are the correct
> width,
> but the bottom and right lines are narrower.
>
> Using the sidepanel, I am only able to alter the line width using the
> spin buttons (up/down arrows beside the width selector.  I cannot
> highlight
> ad enter a value direct into the line width selector.
>
>
> --
> Rory O'Farrell 
>
>   I follow up immediately to say that Draw prints and Exports as PDF
>
 correctly, so the problem is probably localisable to the display module.

   --

>>> ALG
>>>
>>>
>>> --**
>>> --**-
>>> To unsubscribe, e-mail: 
>>> dev-unsubscribe@openoffice.**a**pache.org
>>> 
>>> >
>>>
>>> For additional commands, e-mail: dev-h...@openoffice.apache.org
>>>
>>>
>>>
>
> --**--**-
> To unsubscribe, e-mail: 
> dev-unsubscribe@openoffice.**apache.org
> For additional commands, e-mail: dev-h...@openoffice.apache.org
>
>

Re: Graphical glitches on Draw 4.0

[Armin Le Grand]

On 14.06.2013 16:59, Rory O'Farrell wrote:

On Fri, 14 Jun 2013 15:41:24 +0100
The problem still exists in AOO build 1491860 on Ubuntu, although not on the 
Windows version of that build.

Yes, the commit is r1493078, you will need some patience ;-)


Also, on Windows version (same build) the line widths are predetermined, on the 
side panel I could find no selection box into which one can enter a desired 
line width, or adjust the line width using the up/down arrows. To test in 
Windows, I had to use the line width selector on the Toolbar.
In the Line panel (which you should see) is the Width dropdown. Drop it 
down to see predefined widths and a input box for custom value.

HTH!






-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Fri, 14 Jun 2013 15:41:24 +0100
The problem still exists in AOO build 1491860 on Ubuntu, although not on the 
Windows version of that build.  

Also, on Windows version (same build) the line widths are predetermined, on the 
side panel I could find no selection box into which one can enter a desired 
line width, or adjust the line width using the up/down arrows. To test in 
Windows, I had to use the line width selector on the Toolbar.


-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Fri, 14 Jun 2013 16:20:25 +0200
RGB ES  wrote:

> 2013/6/14 Armin Le Grand 
> 
> > Hi Rory,
> >
> > Thanks a lot! I can now reproduce, recativated the task and I am on it ;-)
> >
> 
> You are fast! While I was submitting a short screencast to the report, you
> fixed it! Many thanks!!
> 
> Regards
> Ricardo
> 
> 
> 
> 
> >
> > Sincerely,
> > Armin
> >
> >
> > On 14.06.2013 15:47, Rory O'Farrell wrote:
> >
> >> On Fri, 14 Jun 2013 14:43:22 +0100
> >> Rory O'Farrell  wrote:
> >>
> >>  On Fri, 14 Jun 2013 15:24:43 +0200
> >>> Armin Le Grand  wrote:
> >>>
> >>>Hi Ricardo,
> 
>  as I already wrote in #122456# I am very surprised how something like
>  that can happen. I would be happy to be able to reproduce this. Could
>  you give a step-by-step description and infos about machine/system
>  running on? Maybe put it directly in the task and write that you canks
>  in advance!
> 
>  Sincerely,
>    Armin
> 
>  On 14.06.2013 15:08, RGB ES wrote:
> 
> > Just draw a thick line and see if you can reproduce this
> >
> > http://people.apache.org/~rgb-**es/Draw-341vs400.png
> >
> > On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> > misplaced on 4.0. There is also a lot of "noise" when you move an
> > object
> > around con 4.0
> >
> > http://people.apache.org/~rgb-**es/Draw-400noise.png
> >
> > This problem is absent on 3.4.1.
> >
> > I'm testing the 64 bits Linux build. From the Help → About
> >
> > AOO400m2(Build:9701)  -  Rev. 1491860
> > 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
> >
> > Refreshing the screen with Ctrl-Shift-R fix the second problem, but
> > not the
> > first one. I cannot find any related issue in bugzilla.
> >
> > One user on ES forums reported that boxes like font name/size are not
> > repainting for him, but I cannot reproduce that.
> >
> > Regards
> > Ricardo
> >
> >  --
>  ALG
> 
> >>> I have just tested this and I'm getting the same effect using AOO 4.0.2
> >>> (buld 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the 
> >>> corners
> >>> of the line away from the green handles are clipped (bevelled) perhaps by
> >>> the bounding box of the selection.  Also, draw a rectangle or square using
> >>> the thick line.  The four lines are offset from the desired position: that
> >>> is the wide line is being drawn to one side of the target position, 
> >>> instead
> >>> of being centred on it, and the top and left lines are the correct width,
> >>> but the bottom and right lines are narrower.
> >>>
> >>> Using the sidepanel, I am only able to alter the line width using the
> >>> spin buttons (up/down arrows beside the width selector.  I cannot 
> >>> highlight
> >>> ad enter a value direct into the line width selector.
> >>>
> >>>
> >>> --
> >>> Rory O'Farrell 
> >>>
> >>>  I follow up immediately to say that Draw prints and Exports as PDF
> >> correctly, so the problem is probably localisable to the display module.
> >>
> >>  --
> > ALG
> >
> >
> > --**--**-

Earlier, where I said AO0 4.0.2 I was wrong: it is AOO 4.0.0, but the build 
number I gave was correct.  

I have now tried using AOO 4.0.0 (build 1491860) on Windows XP SP2 and the 
display is good, without the problem.

I am using the prebuilt snapshots, not building myself (no time!)


-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Armin Le Grand]

Hi Ricrado,

how do I open webm format...?
Interested because I still look for a good format/tooling to do some 
screencasts for the AOO4.0 feature page ;-)


Sincerely,
Armin

On 14.06.2013 16:20, RGB ES wrote:

2013/6/14 Armin Le Grand 


 Hi Rory,

Thanks a lot! I can now reproduce, recativated the task and I am on it ;-)


You are fast! While I was submitting a short screencast to the report, you
fixed it! Many thanks!!

Regards
Ricardo





Sincerely,
 Armin


On 14.06.2013 15:47, Rory O'Farrell wrote:


On Fri, 14 Jun 2013 14:43:22 +0100
Rory O'Farrell  wrote:

  On Fri, 14 Jun 2013 15:24:43 +0200

Armin Le Grand  wrote:

Hi Ricardo,

as I already wrote in #122456# I am very surprised how something like
that can happen. I would be happy to be able to reproduce this. Could
you give a step-by-step description and infos about machine/system
running on? Maybe put it directly in the task and write that you canks
in advance!

Sincerely,
   Armin

On 14.06.2013 15:08, RGB ES wrote:


Just draw a thick line and see if you can reproduce this

http://people.apache.org/~rgb-**es/Draw-341vs400.png

On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
misplaced on 4.0. There is also a lot of "noise" when you move an
object
around con 4.0

http://people.apache.org/~rgb-**es/Draw-400noise.png

This problem is absent on 3.4.1.

I'm testing the 64 bits Linux build. From the Help → About

AOO400m2(Build:9701)  -  Rev. 1491860
2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64

Refreshing the screen with Ctrl-Shift-R fix the second problem, but
not the
first one. I cannot find any related issue in bugzilla.

One user on ES forums reported that boxes like font name/size are not
repainting for him, but I cannot reproduce that.

Regards
Ricardo

  --

ALG


I have just tested this and I'm getting the same effect using AOO 4.0.2
(buld 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners
of the line away from the green handles are clipped (bevelled) perhaps by
the bounding box of the selection.  Also, draw a rectangle or square using
the thick line.  The four lines are offset from the desired position: that
is the wide line is being drawn to one side of the target position, instead
of being centred on it, and the top and left lines are the correct width,
but the bottom and right lines are narrower.

Using the sidepanel, I am only able to alter the line width using the
spin buttons (up/down arrows beside the width selector.  I cannot highlight
ad enter a value direct into the line width selector.


--
Rory O'Farrell 

  I follow up immediately to say that Draw prints and Exports as PDF

correctly, so the problem is probably localisable to the display module.

  --

ALG


--**--**-
To unsubscribe, e-mail: 
dev-unsubscribe@openoffice.**apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org





-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Armin Le Grand]

Hi Ricardo,

On 14.06.2013 16:20, RGB ES wrote:

2013/6/14 Armin Le Grand 


 Hi Rory,

Thanks a lot! I can now reproduce, recativated the task and I am on it ;-)


You are fast! While I was submitting a short screencast to the report, you
fixed it! Many thanks!!


Well, thank you to bring this up again. I had this somewhere in the 
backhead and hoped to be able to reproduce it. Also I was lucky having a 
linux build ready for debugging ;-)




Regards
Ricardo





Sincerely,
 Armin


On 14.06.2013 15:47, Rory O'Farrell wrote:


On Fri, 14 Jun 2013 14:43:22 +0100
Rory O'Farrell  wrote:

  On Fri, 14 Jun 2013 15:24:43 +0200

Armin Le Grand  wrote:

Hi Ricardo,

as I already wrote in #122456# I am very surprised how something like
that can happen. I would be happy to be able to reproduce this. Could
you give a step-by-step description and infos about machine/system
running on? Maybe put it directly in the task and write that you canks
in advance!

Sincerely,
   Armin

On 14.06.2013 15:08, RGB ES wrote:


Just draw a thick line and see if you can reproduce this

http://people.apache.org/~rgb-**es/Draw-341vs400.png

On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
misplaced on 4.0. There is also a lot of "noise" when you move an
object
around con 4.0

http://people.apache.org/~rgb-**es/Draw-400noise.png

This problem is absent on 3.4.1.

I'm testing the 64 bits Linux build. From the Help → About

AOO400m2(Build:9701)  -  Rev. 1491860
2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64

Refreshing the screen with Ctrl-Shift-R fix the second problem, but
not the
first one. I cannot find any related issue in bugzilla.

One user on ES forums reported that boxes like font name/size are not
repainting for him, but I cannot reproduce that.

Regards
Ricardo

  --

ALG


I have just tested this and I'm getting the same effect using AOO 4.0.2
(buld 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners
of the line away from the green handles are clipped (bevelled) perhaps by
the bounding box of the selection.  Also, draw a rectangle or square using
the thick line.  The four lines are offset from the desired position: that
is the wide line is being drawn to one side of the target position, instead
of being centred on it, and the top and left lines are the correct width,
but the bottom and right lines are narrower.

Using the sidepanel, I am only able to alter the line width using the
spin buttons (up/down arrows beside the width selector.  I cannot highlight
ad enter a value direct into the line width selector.


--
Rory O'Farrell 

  I follow up immediately to say that Draw prints and Exports as PDF

correctly, so the problem is probably localisable to the display module.

  --

ALG


--**--**-
To unsubscribe, e-mail: 
dev-unsubscribe@openoffice.**apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org





-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[RGB ES]

2013/6/14 Armin Le Grand 

> Hi Rory,
>
> Thanks a lot! I can now reproduce, recativated the task and I am on it ;-)
>

You are fast! While I was submitting a short screencast to the report, you
fixed it! Many thanks!!

Regards
Ricardo




>
> Sincerely,
> Armin
>
>
> On 14.06.2013 15:47, Rory O'Farrell wrote:
>
>> On Fri, 14 Jun 2013 14:43:22 +0100
>> Rory O'Farrell  wrote:
>>
>>  On Fri, 14 Jun 2013 15:24:43 +0200
>>> Armin Le Grand  wrote:
>>>
>>>Hi Ricardo,

 as I already wrote in #122456# I am very surprised how something like
 that can happen. I would be happy to be able to reproduce this. Could
 you give a step-by-step description and infos about machine/system
 running on? Maybe put it directly in the task and write that you canks
 in advance!

 Sincerely,
   Armin

 On 14.06.2013 15:08, RGB ES wrote:

> Just draw a thick line and see if you can reproduce this
>
> http://people.apache.org/~rgb-**es/Draw-341vs400.png
>
> On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> misplaced on 4.0. There is also a lot of "noise" when you move an
> object
> around con 4.0
>
> http://people.apache.org/~rgb-**es/Draw-400noise.png
>
> This problem is absent on 3.4.1.
>
> I'm testing the 64 bits Linux build. From the Help → About
>
> AOO400m2(Build:9701)  -  Rev. 1491860
> 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
>
> Refreshing the screen with Ctrl-Shift-R fix the second problem, but
> not the
> first one. I cannot find any related issue in bugzilla.
>
> One user on ES forums reported that boxes like font name/size are not
> repainting for him, but I cannot reproduce that.
>
> Regards
> Ricardo
>
>  --
 ALG

>>> I have just tested this and I'm getting the same effect using AOO 4.0.2
>>> (buld 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners
>>> of the line away from the green handles are clipped (bevelled) perhaps by
>>> the bounding box of the selection.  Also, draw a rectangle or square using
>>> the thick line.  The four lines are offset from the desired position: that
>>> is the wide line is being drawn to one side of the target position, instead
>>> of being centred on it, and the top and left lines are the correct width,
>>> but the bottom and right lines are narrower.
>>>
>>> Using the sidepanel, I am only able to alter the line width using the
>>> spin buttons (up/down arrows beside the width selector.  I cannot highlight
>>> ad enter a value direct into the line width selector.
>>>
>>>
>>> --
>>> Rory O'Farrell 
>>>
>>>  I follow up immediately to say that Draw prints and Exports as PDF
>> correctly, so the problem is probably localisable to the display module.
>>
>>  --
> ALG
>
>
> --**--**-
> To unsubscribe, e-mail: 
> dev-unsubscribe@openoffice.**apache.org
> For additional commands, e-mail: dev-h...@openoffice.apache.org
>
>

Re: Graphical glitches on Draw 4.0

[Armin Le Grand]

Hi Rory,

Thanks a lot! I can now reproduce, recativated the task and I am on it ;-)

Sincerely,
Armin

On 14.06.2013 15:47, Rory O'Farrell wrote:

On Fri, 14 Jun 2013 14:43:22 +0100
Rory O'Farrell  wrote:


On Fri, 14 Jun 2013 15:24:43 +0200
Armin Le Grand  wrote:


  Hi Ricardo,

as I already wrote in #122456# I am very surprised how something like
that can happen. I would be happy to be able to reproduce this. Could
you give a step-by-step description and infos about machine/system
running on? Maybe put it directly in the task and write that you canks
in advance!

Sincerely,
  Armin

On 14.06.2013 15:08, RGB ES wrote:

Just draw a thick line and see if you can reproduce this

http://people.apache.org/~rgb-es/Draw-341vs400.png

On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
misplaced on 4.0. There is also a lot of "noise" when you move an object
around con 4.0

http://people.apache.org/~rgb-es/Draw-400noise.png

This problem is absent on 3.4.1.

I'm testing the 64 bits Linux build. From the Help → About

AOO400m2(Build:9701)  -  Rev. 1491860
2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64

Refreshing the screen with Ctrl-Shift-R fix the second problem, but not the
first one. I cannot find any related issue in bugzilla.

One user on ES forums reported that boxes like font name/size are not
repainting for him, but I cannot reproduce that.

Regards
Ricardo


--
ALG

I have just tested this and I'm getting the same effect using AOO 4.0.2 (buld 
1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners of the 
line away from the green handles are clipped (bevelled) perhaps by the bounding 
box of the selection.  Also, draw a rectangle or square using the thick line.  
The four lines are offset from the desired position: that is the wide line is 
being drawn to one side of the target position, instead of being centred on it, 
and the top and left lines are the correct width, but the bottom and right 
lines are narrower.

Using the sidepanel, I am only able to alter the line width using the spin 
buttons (up/down arrows beside the width selector.  I cannot highlight ad enter 
a value direct into the line width selector.


--
Rory O'Farrell 


I follow up immediately to say that Draw prints and Exports as PDF correctly, 
so the problem is probably localisable to the display module.


--
ALG

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Fri, 14 Jun 2013 14:43:22 +0100
Rory O'Farrell  wrote:

> On Fri, 14 Jun 2013 15:24:43 +0200
> Armin Le Grand  wrote:
> 
> >  Hi Ricardo,
> > 
> > as I already wrote in #122456# I am very surprised how something like 
> > that can happen. I would be happy to be able to reproduce this. Could 
> > you give a step-by-step description and infos about machine/system 
> > running on? Maybe put it directly in the task and write that you canks 
> > in advance!
> > 
> > Sincerely,
> >  Armin
> > 
> > On 14.06.2013 15:08, RGB ES wrote:
> > > Just draw a thick line and see if you can reproduce this
> > >
> > > http://people.apache.org/~rgb-es/Draw-341vs400.png
> > >
> > > On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> > > misplaced on 4.0. There is also a lot of "noise" when you move an object
> > > around con 4.0
> > >
> > > http://people.apache.org/~rgb-es/Draw-400noise.png
> > >
> > > This problem is absent on 3.4.1.
> > >
> > > I'm testing the 64 bits Linux build. From the Help → About
> > >
> > > AOO400m2(Build:9701)  -  Rev. 1491860
> > > 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
> > >
> > > Refreshing the screen with Ctrl-Shift-R fix the second problem, but not 
> > > the
> > > first one. I cannot find any related issue in bugzilla.
> > >
> > > One user on ES forums reported that boxes like font name/size are not
> > > repainting for him, but I cannot reproduce that.
> > >
> > > Regards
> > > Ricardo
> > >
> > --
> > ALG
> 
> I have just tested this and I'm getting the same effect using AOO 4.0.2 (buld 
> 1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners of the 
> line away from the green handles are clipped (bevelled) perhaps by the 
> bounding box of the selection.  Also, draw a rectangle or square using the 
> thick line.  The four lines are offset from the desired position: that is the 
> wide line is being drawn to one side of the target position, instead of being 
> centred on it, and the top and left lines are the correct width, but the 
> bottom and right lines are narrower.
> 
> Using the sidepanel, I am only able to alter the line width using the spin 
> buttons (up/down arrows beside the width selector.  I cannot highlight ad 
> enter a value direct into the line width selector.
> 
> 
> -- 
> Rory O'Farrell 
> 

I follow up immediately to say that Draw prints and Exports as PDF correctly, 
so the problem is probably localisable to the display module.

-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Rory O'Farrell]

On Fri, 14 Jun 2013 15:24:43 +0200
Armin Le Grand  wrote:

>  Hi Ricardo,
> 
> as I already wrote in #122456# I am very surprised how something like 
> that can happen. I would be happy to be able to reproduce this. Could 
> you give a step-by-step description and infos about machine/system 
> running on? Maybe put it directly in the task and write that you canks 
> in advance!
> 
> Sincerely,
>  Armin
> 
> On 14.06.2013 15:08, RGB ES wrote:
> > Just draw a thick line and see if you can reproduce this
> >
> > http://people.apache.org/~rgb-es/Draw-341vs400.png
> >
> > On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> > misplaced on 4.0. There is also a lot of "noise" when you move an object
> > around con 4.0
> >
> > http://people.apache.org/~rgb-es/Draw-400noise.png
> >
> > This problem is absent on 3.4.1.
> >
> > I'm testing the 64 bits Linux build. From the Help → About
> >
> > AOO400m2(Build:9701)  -  Rev. 1491860
> > 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
> >
> > Refreshing the screen with Ctrl-Shift-R fix the second problem, but not the
> > first one. I cannot find any related issue in bugzilla.
> >
> > One user on ES forums reported that boxes like font name/size are not
> > repainting for him, but I cannot reproduce that.
> >
> > Regards
> > Ricardo
> >
> --
> ALG

I have just tested this and I'm getting the same effect using AOO 4.0.2 (buld 
1489073) on Xubuntu 12.10.  Also, with a wide line (24pt) the corners of the 
line away from the green handles are clipped (bevelled) perhaps by the bounding 
box of the selection.  Also, draw a rectangle or square using the thick line.  
The four lines are offset from the desired position: that is the wide line is 
being drawn to one side of the target position, instead of being centred on it, 
and the top and left lines are the correct width, but the bottom and right 
lines are narrower.

Using the sidepanel, I am only able to alter the line width using the spin 
buttons (up/down arrows beside the width selector.  I cannot highlight ad enter 
a value direct into the line width selector.


-- 
Rory O'Farrell 

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Armin Le Grand]

Hi Ricardo,

as I already wrote in #122456# I am very surprised how something like 
that can happen. I would be happy to be able to reproduce this. Could 
you give a step-by-step description and infos about machine/system 
running on? Maybe put it directly in the task and write that you canks 
in advance!


Sincerely,
Armin

On 14.06.2013 15:08, RGB ES wrote:

Just draw a thick line and see if you can reproduce this

http://people.apache.org/~rgb-es/Draw-341vs400.png

On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
misplaced on 4.0. There is also a lot of "noise" when you move an object
around con 4.0

http://people.apache.org/~rgb-es/Draw-400noise.png

This problem is absent on 3.4.1.

I'm testing the 64 bits Linux build. From the Help → About

AOO400m2(Build:9701)  -  Rev. 1491860
2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64

Refreshing the screen with Ctrl-Shift-R fix the second problem, but not the
first one. I cannot find any related issue in bugzilla.

One user on ES forums reported that boxes like font name/size are not
repainting for him, but I cannot reproduce that.

Regards
Ricardo


--
ALG

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: Graphical glitches on Draw 4.0

[Tsutomu Uchino]

2013/6/14, RGB ES :
> Just draw a thick line and see if you can reproduce this
>
> http://people.apache.org/~rgb-es/Draw-341vs400.png
>
> On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
> misplaced on 4.0. There is also a lot of "noise" when you move an object
> around con 4.0
>
> http://people.apache.org/~rgb-es/Draw-400noise.png
>
> This problem is absent on 3.4.1.
>
> I'm testing the 64 bits Linux build. From the Help → About
>
> AOO400m2(Build:9701)  -  Rev. 1491860
> 2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64
>
> Refreshing the screen with Ctrl-Shift-R fix the second problem, but not the
> first one. I cannot find any related issue in bugzilla.
>
Here you are:
https://issues.apache.org/ooo/show_bug.cgi?id=122456

Regards
- Tsutomu
> One user on ES forums reported that boxes like font name/size are not
> repainting for him, but I cannot reproduce that.
>
> Regards
> Ricardo
>

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Graphical glitches on Draw 4.0

[RGB ES]

Just draw a thick line and see if you can reproduce this

http://people.apache.org/~rgb-es/Draw-341vs400.png

On the left, 3.4.1, on the right, 4.0. As you can see, handlers are
misplaced on 4.0. There is also a lot of "noise" when you move an object
around con 4.0

http://people.apache.org/~rgb-es/Draw-400noise.png

This problem is absent on 3.4.1.

I'm testing the 64 bits Linux build. From the Help → About

AOO400m2(Build:9701)  -  Rev. 1491860
2013-06-11 15:16:25 (Tue, 11 Jun 2013) - Linux x86_64

Refreshing the screen with Ctrl-Shift-R fix the second problem, but not the
first one. I cannot find any related issue in bugzilla.

One user on ES forums reported that boxes like font name/size are not
repainting for him, but I cannot reproduce that.

Regards
Ricardo