Re: [dev] wmii noob key binding help
Traditionally, this was solved by making wmiirc (1) emit Start wmiirc to /event at startup and later (2) exit if they see Start wmiirc inside their /event processing loop. In this manner, new instances of wmiirc terminate previously existing ones. I don't know why that mechanism was removed from the default SH wmiirc. It did exist in the past, however. It still exists. See ll. 2-4 and 211-212 in cmd/wmii.sh.sh in the source tree. However, spawning wmiirc from the Action menu does not work for me as well, although with different symptoms: No keybindings work thereafter. -- Thomas Dahms
Re: [dev] wmii noob key binding help
I've put the following directly into the events() function of my wmiirc script in the KeyGroup Other section Key $MODKEY-z amixer sset PCM 4+ Key $MODKEY-v eval wmiir setsid amixer sset PCM 4+ I've since quit wmii, logged out, logged back in, and started X and wmii again. Still the key bindings don't work. When I test each of those commands in a terminal it has the desired effect. I'm at a loss at this point as to why it doesn't work. Is there a way for me to check and see if anything is happening at all, even though my volume isn't actually changing? -Eitan
Re: [dev] wmii noob key binding help
On Fri, 25 Feb 2011, Eitan Goldshtrom wrote: I've put the following directly into the events() function of my wmiirc script in the KeyGroup Other section Key $MODKEY-z amixer sset PCM 4+ Key $MODKEY-v eval wmiir setsid amixer sset PCM 4+ I've since quit wmii, logged out, logged back in, and started X and wmii again. Still the key bindings don't work. When I test each of those commands in a terminal it has the desired effect. I'm at a loss at this point as to why it doesn't work. Is there a way for me to check and see if anything is happening at all, even though my volume isn't actually changing? Try something interactive to see that keys are being reloaded (maybe you're editing the wrong wmiirc?): Key $MODKEY-z xmessage blahblah or something that creates an obvious change: Key $MODKEY-z wmiir xwrite /ctl view CHANGED Maybe amixer isn't in your $PATH by the time wmii starts: Key $MODKEY-z $HOME/local-stuff/amixer sset PCM 4+ Or just log the errors, and go from there: Key $MODKEY-z amixer sset PCM 4+ $HOME/amixer.stdout 2$HOME/amixer.stderr -- Best, Ben
Re: [dev] wmii noob key binding help
It was the wrong wmiirc turns out. I was editing /etc/wmii-hg/wmiirc and I was thinking about how the keybindings aren't the only thing that wasn't working, so I ran a locate on wmiirc and found out I have a /usr/local/etc/wmii-hg/wmiirc. Putting the key bindings in there made them work. But I'm still confused about why they don't work when I put them in wmiirc_local in the local_events() function. -Eitan On 02/25/2011 12:50 PM, Benjamin R. Haskell wrote: On Fri, 25 Feb 2011, Eitan Goldshtrom wrote: I've put the following directly into the events() function of my wmiirc script in the KeyGroup Other section Key $MODKEY-z amixer sset PCM 4+ Key $MODKEY-v eval wmiir setsid amixer sset PCM 4+ I've since quit wmii, logged out, logged back in, and started X and wmii again. Still the key bindings don't work. When I test each of those commands in a terminal it has the desired effect. I'm at a loss at this point as to why it doesn't work. Is there a way for me to check and see if anything is happening at all, even though my volume isn't actually changing? Try something interactive to see that keys are being reloaded (maybe you're editing the wrong wmiirc?): Key $MODKEY-z xmessage blahblah or something that creates an obvious change: Key $MODKEY-z wmiir xwrite /ctl view CHANGED Maybe amixer isn't in your $PATH by the time wmii starts: Key $MODKEY-z $HOME/local-stuff/amixer sset PCM 4+ Or just log the errors, and go from there: Key $MODKEY-z amixer sset PCM 4+ $HOME/amixer.stdout 2$HOME/amixer.stderr
Re: [dev] wmii noob key binding help
It was the wrong wmiirc turns out. I was editing /etc/wmii-hg/wmiirc and I was thinking about how the keybindings aren't the only thing that wasn't working, so I ran a locate on wmiirc and found out I have a /usr/local/etc/wmii-hg/wmiirc. Putting the key bindings in there made them work. But I'm still confused about why they don't work when I put them in wmiirc_local in the local_events() function. I have a similar problem [1], but only when using dash as the shell. Try another shell if you are using dash. Or use the workaround described in [1]. [1] http://code.google.com/p/wmii/issues/detail?id=229 -- Thomas Dahms
Re: [dev] wmii noob key binding help
On Thu, Feb 24, 2011 at 12:14 PM, Benjamin R. Haskell suckl...@benizi.com wrote: running the 'wmiirc' action just spawned a second instance of wmiirc (resulting in event doubling, e.g. keystroke that spawns a new terminal spawned two new terminals). Traditionally, this was solved by making wmiirc (1) emit Start wmiirc to /event at startup and later (2) exit if they see Start wmiirc inside their /event processing loop. In this manner, new instances of wmiirc terminate previously existing ones. I don't know why that mechanism was removed from the default SH wmiirc. It did exist in the past, however.
Re: [dev] wmii noob key binding help
I tried that just now and it didn't work. I also tried a few variations
that each didn't work. I checked the keys file and it looks like the 2
key combinations aren't in the file. I thought they would be added
because of the event declarations, but am I supposed to add them
manually or something? If so, how do I do that? When I try to wmiir
write or xwrite to any of those 9P files it overwrites the whole thing;
I just want to append them.
-Eitan
On 02/23/2011 12:15 AM, Benjamin R. Haskell wrote:
On Tue, 22 Feb 2011, Eitan Goldshtrom wrote:
Hi. So I read through as much as I could find on the subject of
defining my own keybindings. I can see how to do it from the 9P
virtual filesystem that wmii has setup, but I am under the impression
that it can be done moreproperly?...via wmiirc_local and the
local_events() function. Unfortunately, whatever I try to put in
there causes wmii to not watch for any input whatsoever, and I get
locked out from doing anything. Could someone show me an example of
how to, say, change volume with amixer? I have the cli commands:
amixer sset PCM 4+
amixer sset PCM 4-
and I would like to bind those commands to Mod-Control-bracketright
and Mod-Control-bracketleft respectively, or at this point any key
combination really. Could someone show me how to bind those, for
example?
E.g.:
Before:
local_events() { true;}
After:
local_events() {
cat '!'
Key XF86AudioRaiseVolume# raise the volume
amixer sset PCM 4+
Key XF86AudioLowerVolume# lower the volume
amixer sset PCM 4-
!
}
Since volume control programs should be of the
return-almost-immediately variety, I didn't bother with the `eval
wmiir setsid [cmd] ` that most of the default commands seem to use.
(What's the point of the `eval` there?). Makes sense to use the
setsid portion in this example:
local_events() {
cat '!'
Key $ALTKEY-slash# open SSH on a host I frequently use
eval wmiir setsid $WMII_TERM -e ssh remote.example.com
!
}
[dev] wmii noob key binding help
Hi. So I read through as much as I could find on the subject of defining my own keybindings. I can see how to do it from the 9P virtual filesystem that wmii has setup, but I am under the impression that it can be done moreproperly?...via wmiirc_local and the local_events() function. Unfortunately, whatever I try to put in there causes wmii to not watch for any input whatsoever, and I get locked out from doing anything. Could someone show me an example of how to, say, change volume with amixer? I have the cli commands: amixer sset PCM 4+ amixer sset PCM 4- and I would like to bind those commands to Mod-Control-bracketright and Mod-Control-bracketleft respectively, or at this point any key combination really. Could someone show me how to bind those, for example? -Eitan
Re: [dev] wmii noob key binding help
On Tue, 22 Feb 2011, Eitan Goldshtrom wrote:
Hi. So I read through as much as I could find on the subject of
defining my own keybindings. I can see how to do it from the 9P
virtual filesystem that wmii has setup, but I am under the impression
that it can be done moreproperly?...via wmiirc_local and the
local_events() function. Unfortunately, whatever I try to put in
there causes wmii to not watch for any input whatsoever, and I get
locked out from doing anything. Could someone show me an example of
how to, say, change volume with amixer? I have the cli commands:
amixer sset PCM 4+
amixer sset PCM 4-
and I would like to bind those commands to Mod-Control-bracketright
and Mod-Control-bracketleft respectively, or at this point any key
combination really. Could someone show me how to bind those, for
example?
E.g.:
Before:
local_events() { true;}
After:
local_events() {
cat '!'
Key XF86AudioRaiseVolume# raise the volume
amixer sset PCM 4+
Key XF86AudioLowerVolume# lower the volume
amixer sset PCM 4-
!
}
Since volume control programs should be of the
return-almost-immediately variety, I didn't bother with the `eval
wmiir setsid [cmd] ` that most of the default commands seem to use.
(What's the point of the `eval` there?). Makes sense to use the setsid
portion in this example:
local_events() {
cat '!'
Key $ALTKEY-slash# open SSH on a host I frequently use
eval wmiir setsid $WMII_TERM -e ssh remote.example.com
!
}
--
Best,
Ben
