Re: [edk2-devel] [PATCH 0/3] add GetMaintainer.py helper script (and Maintainers.txt format change)
Thanks Bob, Liming. GetMaintainer.py patch pushed as 7d0a56c4a125 On Wed, Jul 24, 2019 at 02:03:34AM +, Feng, Bob C wrote: > Patch looks fine for me. > > Reviewed-by: Bob Feng > > -Original Message- > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of Leif > Lindholm > Sent: Friday, July 19, 2019 5:00 PM > To: Laszlo Ersek > Cc: edk2-devel-groups-io ; Andrew Fish > ; Kinney, Michael D ; Philippe > Mathieu-Daude ; Feng, Bob C ; Gao, > Liming ; Wu, Hao A ; Stefan Berger > > Subject: Re: [edk2-devel] [PATCH 0/3] add GetMaintainer.py helper script (and > Maintainers.txt format change) > > On Thu, Jul 18, 2019 at 11:17:30PM +0200, Laszlo Ersek wrote: > > On 07/18/19 18:27, Leif Lindholm wrote: > > > Laszlo, Hao - I have prepared a set for pushing as below. > > > > > > (Reviewed-by: Leif Lindholm for all of > > > your > > > patches.) > > > *But*, I need a review from Bob and/or Liming before I push the final > > > one: > > > "BaseTools: add GetMaintainer.py script" - > > > https://edk2.groups.io/g/devel/message/43666 > > > > > > I have verified reviews/acks by all affected reviewers, except for > > > Stefan Berger for Ovmf TCG/TPM2. > > > > Stefan's R-b has arrived as well: > > > > http://mid.mail-archive.com/7201b3fb-d84b-30e0-61c8-bf9bb9defa7a@linux > > .ibm.com > > > > So, I agree, those four patches regarding OvmfPkg reviewership are now > > fully approved. > > > > Please pick up Phil's feedback as well. > > > > > While I would prefer to have that too, this is a file format shift - > > > not a change in responsibility areas. > > > Laszlo, do you agree? > > > If so, I can push 1-7/8 as is. > > > > See above -- then I'm OK. > > 1-7/8 pushed as: > 3dafa0382286..296c908c6968 > > Will push the GetMaintainer.py script once approved by BaseTools maintainers. > > Thanks! > > / > Leif > > > Thank you! > > Laszlo > > > > > > > > / > > > Leif > > > > > > Hao A Wu (1): > > > Maintainers.txt: Fine-grained review ownership for MdeModulePkg > > > > > > Laszlo Ersek (4): > > > Maintainers.txt: split out section "ArmVirtPkg: modules used on Xen" > > > Maintainers.txt: split out section "OvmfPkg: Xen-related modules" > > > Maintainers.txt: split out section "OvmfPkg: TCG- and TPM2-related > > > modules" > > > Maintainers.txt: split out section "OvmfPkg: CSM modules" > > > > > > Leif Lindholm (3): > > > Maintainers.txt: update for filesystem area descriptions > > > Maintainers.txt: add wildcard path association for Arm/AArch64 > > > BaseTools: add GetMaintainer.py script > > > > > > > > > On Fri, 12 Jul 2019 at 18:01, Leif Lindholm > > > > > > wrote: > > > > > >> Changes are available directly from: > > >> > > >> https://git.linaro.org/people/leif.lindholm/edk2.git/log/?h=upstrea > > >> ming/git-maintainer-v1 > > >> > > >> This series adds new tags to the Maintainers.txt format, making it > > >> possible to describe which filesystem paths are looked after by > > >> which people, and hence automating the extraction of a list over > > >> who should be cc:d on a patch submission. > > >> > > >> Remaining shorcomings in v1: > > >> - Will still be misparsing OvmfPkg and MdeModulePkg due to non-tag lines > > >> interspersed with the tag lines. These lines will be removed as areas > > >> of > > >> responsibility is formally rewritten as tags. > > >> - * Wildcard support is not fully filesystem compliant except in first or > > >> last position in the file pattern (it translates as regex .* > > >> elsewhere). > > >> However, actual cases of mismatch are expected to be unlikely, and they > > >> will be false positives rather than false negatives - so I think this > > >> is > > >> good enough at least for a start. > > >> - Provides no information of why certain people or meiling lists were > > >> picked - it just bundles all recipients up, deduplicates them, and > > >> prints them out. > > >> > > >> Using the script requires the gitpython module to be installed. > > >> > > >> Worthwhil
Re: [edk2-devel] [PATCH 0/3] add GetMaintainer.py helper script (and Maintainers.txt format change)
On Thu, Jul 18, 2019 at 11:17:30PM +0200, Laszlo Ersek wrote: > On 07/18/19 18:27, Leif Lindholm wrote: > > Laszlo, Hao - I have prepared a set for pushing as below. > > > > (Reviewed-by: Leif Lindholm for all of your > > patches.) > > *But*, I need a review from Bob and/or Liming before I push the final one: > > "BaseTools: add GetMaintainer.py script" - > > https://edk2.groups.io/g/devel/message/43666 > > > > I have verified reviews/acks by all affected reviewers, except for Stefan > > Berger for Ovmf TCG/TPM2. > > Stefan's R-b has arrived as well: > > 7201b3fb-d84b-30e0-61c8-bf9bb9defa7a@linux.ibm.com">http://mid.mail-archive.com/7201b3fb-d84b-30e0-61c8-bf9bb9defa7a@linux.ibm.com > > So, I agree, those four patches regarding OvmfPkg reviewership are now > fully approved. > > Please pick up Phil's feedback as well. > > > While I would prefer to have that too, this is a file format shift - not a > > change in responsibility areas. > > Laszlo, do you agree? > > If so, I can push 1-7/8 as is. > > See above -- then I'm OK. 1-7/8 pushed as: 3dafa0382286..296c908c6968 Will push the GetMaintainer.py script once approved by BaseTools maintainers. Thanks! / Leif > Thank you! > Laszlo > > > > > / > > Leif > > > > Hao A Wu (1): > > Maintainers.txt: Fine-grained review ownership for MdeModulePkg > > > > Laszlo Ersek (4): > > Maintainers.txt: split out section "ArmVirtPkg: modules used on Xen" > > Maintainers.txt: split out section "OvmfPkg: Xen-related modules" > > Maintainers.txt: split out section "OvmfPkg: TCG- and TPM2-related > > modules" > > Maintainers.txt: split out section "OvmfPkg: CSM modules" > > > > Leif Lindholm (3): > > Maintainers.txt: update for filesystem area descriptions > > Maintainers.txt: add wildcard path association for Arm/AArch64 > > BaseTools: add GetMaintainer.py script > > > > > > On Fri, 12 Jul 2019 at 18:01, Leif Lindholm > > wrote: > > > >> Changes are available directly from: > >> > >> https://git.linaro.org/people/leif.lindholm/edk2.git/log/?h=upstreaming/git-maintainer-v1 > >> > >> This series adds new tags to the Maintainers.txt format, making it possible > >> to describe which filesystem paths are looked after by which people, and > >> hence automating the extraction of a list over who should be cc:d on a > >> patch > >> submission. > >> > >> Remaining shorcomings in v1: > >> - Will still be misparsing OvmfPkg and MdeModulePkg due to non-tag lines > >> interspersed with the tag lines. These lines will be removed as areas of > >> responsibility is formally rewritten as tags. > >> - * Wildcard support is not fully filesystem compliant except in first or > >> last position in the file pattern (it translates as regex .* elsewhere). > >> However, actual cases of mismatch are expected to be unlikely, and they > >> will be false positives rather than false negatives - so I think this is > >> good enough at least for a start. > >> - Provides no information of why certain people or meiling lists were > >> picked - it just bundles all recipients up, deduplicates them, and > >> prints them out. > >> > >> Using the script requires the gitpython module to be installed. > >> > >> Worthwhile mentioning outside the ChangeLog is the added -l flag, which > >> lets you look up what a given path would return in the way of matches. > >> E.g. "python BaseTools/Scripts/GetMaintainer.py -l Non/Existing/Path" > >> would return: > >> --- > >> Non/Existing/Path > >> "Non/Existing/Path": no maintainers found, looking for default > >> Andrew Fish > >> Laszlo Ersek > >> Leif Lindholm > >> Michael D Kinney > >> devel@edk2.groups.io > >> --- > >> > >> This series would still result in GetMaintainers.py missing some > >> maintainers/reviewers due to descriptions in prose rather than filename > >> patterns. My preferred way of handling this would be to merge 1-2/3 as > >> soon as found acceptable, following up and merging patches to update > >> ArmVirtPkg, MdeModulePkg, and OvmfPkg, and finally once the file is > >> consistent, proceed to merge 3/3. > >> > >> Changelog: > >> v1: > >> - Rebase to current Maintainers.txt. > >> - Fix typos and missed bits in Maintainers.txt. > >> - Get rid of the magic '' filename, let the single-char '*' > >> wildcard resolve this (_using_ the magic '' filename in the > >> script, but treating it as if it was a file in the top-level directory). > >> - Add -l flag to script to look up which maintainers would be returned for > >> a given path (which need not exist). > >> rfc: > >> - Split patches up > >> - one for new Maintainers.txt format (documentation and F: tags). > >> - one for adding a new wilcards responsibility area for */Arm, */AArch64 > >> - one for the GetMaintainer.py script > >> - Reworked wildcard handling based on Laszlo's explanation > >> - Trailing / covers everything under that directory > >> - Trailing * does not cover subdirectories > >> - Added support for X: tag