Re: [Devel] multiple replicated servers socket info read error
Hi Raymond in your scenario it's not useful to replicate the socket, since there is no shared IP between your servers. you may try to play at replication with the received value (the address where the request was received from) to make one server to point to the other for replicated registrations. regards, bogdan Raymond Chen wrote: Hi Bogdan, So we still can't solve the NAT binding problem in the current replicated design? Any other solutions to this ? Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月15日 5:26 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Ray, I guess is a misunderstanding regarding the purpose of this sock_info: the register saves information about the local socket on which the REGISTER was received - it;s useful in multiple interfaces scenario, when to perform proper nat traversal is essential to sent all request from the same interface as register was received on. The NAT bind of the UA will be open to communicate only with that socket/interface. regards, bogdan Raymond Chen wrote: Hi Bogdan, We have setup an environment where UA 1 registered openser 1 replicate openser 2. We want to use UA 2 which registered to openser 2 to call UA 1, there is no respond from UA 1, which means the invite message did not get through the UA1 router. We can get through the router if UA 2 is registered to Openser 1. We thought we can get around the problem by replicate the openser 1 sock_info to openser 2, so when UA 2 calls to UA1 through openser 2, it will route back to openser 1 and in turn get pass the router and to UA 1. I am not sure this is the right logic to solve the NAT issue though. Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月15日 0:34 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, Raymond Chen wrote: Hi Bogdan, My bad, I thought make install will overwrite the old modules. Now I got the CVS compiled and installed. Old error message has gone away, but another error occurs in debug: . 0(21224) grep_sock_info - checking if port 5060 matches port 5060 0(21224) ERROR:registrar:get_sock_hdr: non-local socket udp:xxx.xxx.xxx.xxx:5060 0(21224) parse_headers: flags=400 0(21224) parse_headers: flags=8 I thought the replicated proxy should store the remote sock_info and should not return the as non-local socket. Correct me if I am wrong about this replicate feature. here is more a matter of logic. If you replicate the sock_info (the socket the request was received on) to a server which doesn't use that socket, it's really useless - it will not be able to use it to send any requests by using that socket. If you describe what you are trying to achieve, I will be able to understand better you scenario. regards, bogdan Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org
Re: [Devel] multiple replicated servers socket info read error
Hi Raymond, Raymond Chen wrote: Hi Bogdan, My bad, I thought make install will overwrite the old modules. Now I got the CVS compiled and installed. Old error message has gone away, but another error occurs in debug: . 0(21224) grep_sock_info - checking if port 5060 matches port 5060 0(21224) ERROR:registrar:get_sock_hdr: non-local socket udp:xxx.xxx.xxx.xxx:5060 0(21224) parse_headers: flags=400 0(21224) parse_headers: flags=8 I thought the replicated proxy should store the remote sock_info and should not return the as non-local socket. Correct me if I am wrong about this replicate feature. here is more a matter of logic. If you replicate the sock_info (the socket the request was received on) to a server which doesn't use that socket, it's really useless - it will not be able to use it to send any requests by using that socket. If you describe what you are trying to achieve, I will be able to understand better you scenario. regards, bogdan Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
RE: [Devel] multiple replicated servers socket info read error
Hi Bogdan, So we still can't solve the NAT binding problem in the current replicated design? Any other solutions to this ? Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月15日 5:26 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Ray, I guess is a misunderstanding regarding the purpose of this sock_info: the register saves information about the local socket on which the REGISTER was received - it;s useful in multiple interfaces scenario, when to perform proper nat traversal is essential to sent all request from the same interface as register was received on. The NAT bind of the UA will be open to communicate only with that socket/interface. regards, bogdan Raymond Chen wrote: Hi Bogdan, We have setup an environment where UA 1 registered openser 1 replicate openser 2. We want to use UA 2 which registered to openser 2 to call UA 1, there is no respond from UA 1, which means the invite message did not get through the UA1 router. We can get through the router if UA 2 is registered to Openser 1. We thought we can get around the problem by replicate the openser 1 sock_info to openser 2, so when UA 2 calls to UA1 through openser 2, it will route back to openser 1 and in turn get pass the router and to UA 1. I am not sure this is the right logic to solve the NAT issue though. Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月15日 0:34 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, Raymond Chen wrote: Hi Bogdan, My bad, I thought make install will overwrite the old modules. Now I got the CVS compiled and installed. Old error message has gone away, but another error occurs in debug: . 0(21224) grep_sock_info - checking if port 5060 matches port 5060 0(21224) ERROR:registrar:get_sock_hdr: non-local socket udp:xxx.xxx.xxx.xxx:5060 0(21224) parse_headers: flags=400 0(21224) parse_headers: flags=8 I thought the replicated proxy should store the remote sock_info and should not return the as non-local socket. Correct me if I am wrong about this replicate feature. here is more a matter of logic. If you replicate the sock_info (the socket the request was received on) to a server which doesn't use that socket, it's really useless - it will not be able to use it to send any requests by using that socket. If you describe what you are trying to achieve, I will be able to understand better you scenario. regards, bogdan Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
Re: [Devel] multiple replicated servers socket info read error
Hi Raymond, as probably you use the pserver cvs, it will take some time until it will be updated (sourceforge policy). Do an update in couple of hours. regards, bogdan Raymond Chen wrote: Hi Bogdan, Thanks for the quick fix, but it's seems the problem still exist. Registration replication message: .. User-Agent: Sipura/SPA2000-2.0.13(g). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. P-hint: Proxied. Sock-Info: udp:xxx.xxx.xxx.xxx:5060 .. Debug info: .. 0(6258) parse_headers: flags= 0(6258) ERROR: parse_phostport: bad port number in udp:xxx.xxx.xxx.xxx:5060 0(6258) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(6258) parse_headers: flags=400 0(6258) parse_headers: flags=8 0(6258) build_contact(): Created Contact HF:Contact:sip:[EMAIL PROTECTED]:18373;expires=3600 .. Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
RE: [Devel] multiple replicated servers socket info read error
Just updated from CVS, but error still there. Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月14日 0:32 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, as probably you use the pserver cvs, it will take some time until it will be updated (sourceforge policy). Do an update in couple of hours. regards, bogdan Raymond Chen wrote: Hi Bogdan, Thanks for the quick fix, but it's seems the problem still exist. Registration replication message: .. User-Agent: Sipura/SPA2000-2.0.13(g). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. P-hint: Proxied. Sock-Info: udp:xxx.xxx.xxx.xxx:5060 .. Debug info: .. 0(6258) parse_headers: flags= 0(6258) ERROR: parse_phostport: bad port number in udp:xxx.xxx.xxx.xxx:5060 0(6258) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(6258) parse_headers: flags=400 0(6258) parse_headers: flags=8 0(6258) build_contact(): Created Contact HF:Contact:sip:[EMAIL PROTECTED]:18373;expires=3600 .. Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
RE: [Devel] multiple replicated servers socket info read error
Hi Bogdan, My bad, I thought make install will overwrite the old modules. Now I got the CVS compiled and installed. Old error message has gone away, but another error occurs in debug: . 0(21224) grep_sock_info - checking if port 5060 matches port 5060 0(21224) ERROR:registrar:get_sock_hdr: non-local socket udp:xxx.xxx.xxx.xxx:5060 0(21224) parse_headers: flags=400 0(21224) parse_headers: flags=8 I thought the replicated proxy should store the remote sock_info and should not return the as non-local socket. Correct me if I am wrong about this replicate feature. Thanks Ray -Original Message- From: Bogdan-Andrei Iancu [mailto:[EMAIL PROTECTED] Sent: 2005年12月13日 21:40 To: Raymond Chen Cc: devel@openser.org Subject: Re: [Devel] multiple replicated servers socket info read error Hi Raymond, the problem was fixed on CVS. Please give it a try. thanks for report, bogdan Bogdan-Andrei Iancu wrote: Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
Re: [Devel] multiple replicated servers socket info read error
Hi Raymond, I guess is not a config issue, but it might be the result of the latest work on it - proto was added couple of days ago. Please post the replicated request and I will take a look to see where is the problem. Regards, Bogdan Raymond Chen wrote: Dear all, We’ve setup a multiple replicated servers scenarios, openser 1 replicate to openser 2. Openser 1: …… add_sock_hdr(Sock-Info); t_replicate(“openser 2”); ……. Openser 2: ……. modparam(registrar, sock_flag, 18) modparam(registrar, sock_hdr_name, Sock-Info) …… setflag(18); ……… We are expecting the socket info will be stored by register instead of the received socket info. But from debug we have the following error message. 0(2599) ERROR: parse_phostport: bad port number in udp:xxx.xxx..xxx:5060 0(2599) ERROR:registrar:get_sock_hdr: bad socket udp:xxx.xxx.xxx.xxx:5060 in 0(2599) parse_headers: flags=400 0(2599) build_contact(): Created Contact HF: Contact: sip:[EMAIL PROTECTED]:51018;expires=300 Any idea? Is it the configuration we did was wrong? Thanks Ray ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel ___ Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel