[PATCH rtems-docs v2] user/imx: Add i.MX6UL/ULL.
Update #3869 --- user/bsps/arm/imx.rst | 47 --- 1 file changed, 44 insertions(+), 3 deletions(-) diff --git a/user/bsps/arm/imx.rst b/user/bsps/arm/imx.rst index bc93ae3..ee98f0b 100644 --- a/user/bsps/arm/imx.rst +++ b/user/bsps/arm/imx.rst @@ -7,9 +7,10 @@ imx (NXP i.MX) == This BSP offers only one variant, the `imx7`. This variant supports the i.MX -7Dual processor. The basic hardware initialization is not performed by the -BSP. A boot loader with device tree support must be used to start the BSP, -e.g. U-Boot. +7Dual processor and the i.MX 6UL/ULL processor family (with slightly different +clock settings). The basic hardware initialization is not performed by the BSP. +A boot loader with device tree support must be used to start the BSP, e.g. +U-Boot or barebox. Build Configuration Options --- @@ -40,9 +41,30 @@ The following options are available at the configure command line. ``IMX_CCM_UART_HZ`` The UART clock frequency in Hz (default is 2400). +``IMX_CCM_ECSPI_HZ`` + The ECSPI clock frequency in Hz (default is 6750). + ``IMX_CCM_AHB_HZ`` The AHB clock frequency in Hz (default is 13500). +``IMX_CCM_SDHCI_HZ`` + The SDHCI clock frequency in Hz (default is 196363000). + +Clock settings for different boards +--- + +The default clock settings are targeted for an i.MX 7Dual evaluation board using +U-Boot. Some other boards with different boot loaders need different settings: + + * Phytec phyCORE-i.MX 6ULL (system on module) with MCIMX6Y2CVM08AB and a + barebox bootloader (version ``2019.01.0-bsp-yocto-i.mx6ul-pd19.1.0``): + + * IMX_CCM_IPG_HZ=6600 + * IMX_CCM_UART_HZ=8000 + * IMX_CCM_AHB_HZ=6600 + * IMX_CCM_SDHCI_HZ=19800 + * IMX_CCM_ECSPI_HZ=6000 + Boot via U-Boot --- @@ -65,6 +87,14 @@ The ``loadfdt`` command may be not defined in your U-Boot environment. Just replace it with the appropriate commands to load the device tree at ``${fdt_addr}``. +Boot via barebox + + +The same command like for U-Boot can be used to generate an application image. +In a default configuration barebox expects an fdt image called `oftree` and a +kernel image called `zImage` in the root folder of the bootable medium (e.g. an +SD card). + Clock Driver @@ -133,6 +163,17 @@ system controls: A value of zero for the time or count disables the interrupt coalescing in the corresponding direction. +On the Phytec phyCORE-i.MX 6ULL modules the PHY needs an initialization for the +clock. A special PHY driver handles that (``ksz8091rnb``). Add it to your libbsd +config like that: + +.. code-block:: c + +#define RTEMS_BSD_CONFIG_BSP_CONFIG +#define RTEMS_BSD_CONFIG_INIT +SYSINIT_DRIVER_REFERENCE(ksz8091rnb, miibus); +#include + MMC/SDCard Driver - -- 2.16.4 ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
[PATCH rtems-docs v2] user/imx: Add i.MX6UL/ULL.
Update #3869 --- user/bsps/arm/imx.rst | 47 --- 1 file changed, 44 insertions(+), 3 deletions(-) diff --git a/user/bsps/arm/imx.rst b/user/bsps/arm/imx.rst index bc93ae3..ee98f0b 100644 --- a/user/bsps/arm/imx.rst +++ b/user/bsps/arm/imx.rst @@ -7,9 +7,10 @@ imx (NXP i.MX) == This BSP offers only one variant, the `imx7`. This variant supports the i.MX -7Dual processor. The basic hardware initialization is not performed by the -BSP. A boot loader with device tree support must be used to start the BSP, -e.g. U-Boot. +7Dual processor and the i.MX 6UL/ULL processor family (with slightly different +clock settings). The basic hardware initialization is not performed by the BSP. +A boot loader with device tree support must be used to start the BSP, e.g. +U-Boot or barebox. Build Configuration Options --- @@ -40,9 +41,30 @@ The following options are available at the configure command line. ``IMX_CCM_UART_HZ`` The UART clock frequency in Hz (default is 2400). +``IMX_CCM_ECSPI_HZ`` + The ECSPI clock frequency in Hz (default is 6750). + ``IMX_CCM_AHB_HZ`` The AHB clock frequency in Hz (default is 13500). +``IMX_CCM_SDHCI_HZ`` + The SDHCI clock frequency in Hz (default is 196363000). + +Clock settings for different boards +--- + +The default clock settings are targeted for an i.MX 7Dual evaluation board using +U-Boot. Some other boards with different boot loaders need different settings: + + * Phytec phyCORE-i.MX 6ULL (system on module) with MCIMX6Y2CVM08AB and a + barebox bootloader (version ``2019.01.0-bsp-yocto-i.mx6ul-pd19.1.0``): + + * IMX_CCM_IPG_HZ=6600 + * IMX_CCM_UART_HZ=8000 + * IMX_CCM_AHB_HZ=6600 + * IMX_CCM_SDHCI_HZ=19800 + * IMX_CCM_ECSPI_HZ=6000 + Boot via U-Boot --- @@ -65,6 +87,14 @@ The ``loadfdt`` command may be not defined in your U-Boot environment. Just replace it with the appropriate commands to load the device tree at ``${fdt_addr}``. +Boot via barebox + + +The same command like for U-Boot can be used to generate an application image. +In a default configuration barebox expects an fdt image called `oftree` and a +kernel image called `zImage` in the root folder of the bootable medium (e.g. an +SD card). + Clock Driver @@ -133,6 +163,17 @@ system controls: A value of zero for the time or count disables the interrupt coalescing in the corresponding direction. +On the Phytec phyCORE-i.MX 6ULL modules the PHY needs an initialization for the +clock. A special PHY driver handles that (``ksz8091rnb``). Add it to your libbsd +config like that: + +.. code-block:: c + +#define RTEMS_BSD_CONFIG_BSP_CONFIG +#define RTEMS_BSD_CONFIG_INIT +SYSINIT_DRIVER_REFERENCE(ksz8091rnb, miibus); +#include + MMC/SDCard Driver - -- 2.16.4 ___ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel