[digitalradio] Need help setting up a K'wood TS 2000

2010-07-02 Thread greathounder 
This morning UPS brought my SignaLink USB. I've got it connected thru the 13 
pin ACC port in back. I'm using Air Link EXpress. I can get it to decode the 
signal, but when I click on tune, my ptt light doesn't turn on. It must be 
something I haven't done on the radio. Any Ideas? Thanks in advance  73  Bill 
N8VWI

Re: [digitalradio] Need help setting up a K'wood TS 2000

2010-07-02 Thread greathounder 
I think I found the problem. I forgot to change mode from usb to fsk.  
Atleast the red light comes on now..Bill  N8VWI

Re: [digitalradio] Need help setting up a K'wood TS 2000

2010-07-02 Thread Jeremy Cowgar 
I do not know about the SignaLink really, but if you have it connected 
correctly to the rear accessory port, there is nothing you need to do 
with the radio. When the PTT line is grounded, it enters TX mode.


Thus, I would look into either your software setup (look for a PTT com 
port and/or DTR/RTS high/low type setup) or possibly the SignaLink cable 
setup (if it's anything like the RigBlaster that has jumpers you have to 
setup correctly.


Also, you may want to check out the TS-2000 group: 
http://groups.yahoo.com/group/KenwoodTS-2000/ ... I belong there and 
they may be able to help as well... but I really think it's software or 
the SignaLink setup.


Jeremy
KB8LFA
http://www.kb8lfa.com

On 7/2/2010 3:19 PM, greathounder wrote:


This morning UPS brought my SignaLink USB. I've got it connected thru 
the 13 pin ACC port in back. I'm using Air Link EXpress. I can get it 
to decode the signal, but when I click on tune, my ptt light doesn't 
turn on. It must be something I haven't done on the radio. Any Ideas? 
Thanks in advance 73 Bill N8VWI