Re: [digitalradio] Re: Transceiver Mode Setting - Digital or USB

[kh6ty]

> Can I use Flarq directly on Windows???

> 73

> Omar YK1AO


Yes, it works under Windows XP or VISTA, or Linux.

73, Skip KH6TY

[digitalradio] Re: Transceiver Mode Setting - Digital or USB

[Shabsigh]

Can I use Flarq directly on Windows???

73

Omar YK1AO

[digitalradio] Re: Transceiver Mode Setting - Digital or USB

[Graham]

Dick,

USB is the  norm for data modes .. I think you  will find any speach 
processing  ie  envalope clipping  is 'off' when the  set is switched 
to  digital .. 

G ...


--- In digitalradio@yahoogroups.com, "kc4cop"  wrote:
>
> While I am sure that this question has been asked and answered many 
> times, I can't find the answer after a reasonable amount of 
searching. 
> On a radio that has a mode choice of "digital" and "(USB)" , is 
there a 
> preference for selecting the mode on the transceiver itself? An 
example 
> being PSK 31 on the 40  band. If PSK 31 is chosen in the software 
and 
> digital is selected on the radio is the transmitted signal 
> automatically set to use the upper side band?  What should the 
settings 
> be on the radio?
> 
> My solution thus far has been to stay off of the 40 m band when 
using 
> PSK. Might there be a better one?
> 
> Dick Zseltvay, KC4COP
>

[digitalradio] Re: Transceiver Mode Setting - Digital or USB

[kc4cop]

Simon:

I should have added that I have a RigBlaster Plug and Play sound card 
interface that does use the "data" jack on the FT-897D.

Dick Z., KC4COP

--- In digitalradio@yahoogroups.com, "Simon \(HB9DRV\)" 
 wrote:
>
> Dick, In general use USB - what's your radio?
> 
> Sometime selecting Digital enables audio I/O via a rear connector.
> 
> Simon Brown, HB9DRV
> www.ham-radio-deluxe.com
> 
> - Original Message - 
> From: "kc4cop" 
> 
> > On a radio that has a mode choice of "digital" and "(USB)" , is 
there a 
> > preference for selecting the mode on the transceiver itself?
>

[digitalradio] Re: Transceiver Mode Setting - Digital or USB

[kc4cop]

Simon - thanks for the quick reply

My Yaesu FT-1000D (without the "D") has a RTTY mode switch in addition 
to the USB mode and a FT-897D. The FT-897 just says "digital". 
Apparently it does not specifically address the various digital modes 
individually.

Dick Z. KC4COP

--- In digitalradio@yahoogroups.com, "Simon \(HB9DRV\)" 
 wrote:
>
> Dick, In general use USB - what's your radio?
> 
> Sometime selecting Digital enables audio I/O via a rear connector.
> 
> Simon Brown, HB9DRV
> www.ham-radio-deluxe.com
> 
> - Original Message - 
> From: "kc4cop" 
> 
> > On a radio that has a mode choice of "digital" and "(USB)" , is 
there a 
> > preference for selecting the mode on the transceiver itself?
>