Re: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander
Patrick, for the procedures i described, I am not using the SDR Direct part of Multipsk, just the usual Multipsk with 3kHZ waterfall. Andy K3UK On Fri, Mar 19, 2010 at 1:54 PM, Patrick Lindecker wrote: > > > Hello Andy, > > > > It is really Commander that performs the band changes , then Multipsk > with > > the decode. > However, there is a possibility to scan directly 4 frequencies from > Multipsk > (in the "Transceiver" window) using of course Commander. > > > > So far, these two days of band scanning have only captured PSK31 signals > > via the Panoramic feature. It has not captured any >RSIDs. I am not sure > > if that is because there were NO RSIDs transmitted on the frequencies I > > was scanning, or if the RS-ID >decode does not work in Multipsk when > > Panoroamic is enabled. I will do some more testing tomorrow as I check > > the > If the Panoramic is started, the (SdR) RS ID does not work. I must see this > > point... > > 73 > Patrick > > - Original Message - > From: "obrienaj" > > To: > > Sent: Friday, March 19, 2010 2:36 AM > Subject: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander > > > > > --- In digitalradio@yahoogroups.com , > "Francesco Piccone" > > wrote: > >> > >> Dear Andy and puts on MultiPSK to perform this function ? > >> 73 > >> tnx > >> Frank > >> yv4gjn > > > > > > Frank, > > > > It is really Commander that performs the band changes , then Multipsk > with > > the decode. > > > > 1. Set Commander to scan specific frequencies (see "config" in Commander" > > 2. Set 'dwell" time in Commander to suit your needs (I used 120 seconds) > > 3. Launch Multipsk, press Commander button ,at bottom of Multipsk screen > > ,to link Commander and Multipsk for frequency information. > > 4. in Multipsk, activate PSK reporter DLL > > 5. In Multipsk, if interested in PSK data, choose PSK31 as the mode and > > then press "Panoromic" > > > > 6. When ready to look at the signals decoded and captured, examine the > PSK > > reporter window in MultiPSK, you will see things like.. > > 22:26 PJ2MI PSK31 18101701 > > 21:54 G3WXC PSK31 10140894 > > 21:54 PA0DY PSK31 10141361 > > 21:49 N7UF PSK31 18102092 > > > > So far, these two days of band scanning have only captured PSK31 signals > > via the Panoramic feature. It has not captured any RSIDs. I am not sure > > if that is because there were NO RSIDs transmitted on the frequencies I > > was scanning, or if the RS-ID decode does not work in Multipsk when > > Panoroamic is enabled. I will do some more testing tomorrow as I check > > the frequencies suggested by Rein. > > > > Andy K3UK > > > > > > > > > > > > > http://www.obriensweb.com/digispotter.html > > Chat, Skeds, and "spots" all in one (resize to suit)Yahoo! Groups Links > > > > > > > > > > >
Re: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander
Hello Andy, > It is really Commander that performs the band changes , then Multipsk with > the decode. However, there is a possibility to scan directly 4 frequencies from Multipsk (in the "Transceiver" window) using of course Commander. > So far, these two days of band scanning have only captured PSK31 signals > via the Panoramic feature. It has not captured any >RSIDs. I am not sure > if that is because there were NO RSIDs transmitted on the frequencies I > was scanning, or if the RS-ID >decode does not work in Multipsk when > Panoroamic is enabled. I will do some more testing tomorrow as I check > the If the Panoramic is started, the (SdR) RS ID does not work. I must see this point... 73 Patrick - Original Message - From: "obrienaj" To: Sent: Friday, March 19, 2010 2:36 AM Subject: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander > > --- In digitalradio@yahoogroups.com, "Francesco Piccone" > wrote: >> >> Dear Andy and puts on MultiPSK to perform this function ? >> 73 >> tnx >> Frank >> yv4gjn > > > Frank, > > It is really Commander that performs the band changes , then Multipsk with > the decode. > > 1. Set Commander to scan specific frequencies (see "config" in Commander" > 2. Set 'dwell" time in Commander to suit your needs (I used 120 seconds) > 3. Launch Multipsk, press Commander button ,at bottom of Multipsk screen > ,to link Commander and Multipsk for frequency information. > 4. in Multipsk, activate PSK reporter DLL > 5. In Multipsk, if interested in PSK data, choose PSK31 as the mode and > then press "Panoromic" > > 6. When ready to look at the signals decoded and captured, examine the PSK > reporter window in MultiPSK, you will see things like.. > 22:26 PJ2MI PSK31 18101701 > 21:54 G3WXC PSK31 10140894 > 21:54 PA0DY PSK31 10141361 > 21:49 N7UF PSK31 18102092 > > So far, these two days of band scanning have only captured PSK31 signals > via the Panoramic feature. It has not captured any RSIDs. I am not sure > if that is because there were NO RSIDs transmitted on the frequencies I > was scanning, or if the RS-ID decode does not work in Multipsk when > Panoroamic is enabled. I will do some more testing tomorrow as I check > the frequencies suggested by Rein. > > Andy K3UK > > > > > > http://www.obriensweb.com/digispotter.html > Chat, Skeds, and "spots" all in one (resize to suit)Yahoo! Groups Links > > > >
Re: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander
Dear, Andy K3UK thank you ... 73" Frank YV4GJN (Muchas gracias por la explicacion mi amigo Andy saludos desde Valencia Venezuela) - Original Message - From: obrienaj To: digitalradio@yahoogroups.com Sent: Thursday, March 18, 2010 9:06 PM Subject: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander --- In digitalradio@yahoogroups.com, "Francesco Piccone" wrote: > > Dear Andy and puts on MultiPSK to perform this function ? > 73 > tnx > Frank > yv4gjn Frank, It is really Commander that performs the band changes , then Multipsk with the decode. 1. Set Commander to scan specific frequencies (see "config" in Commander" 2. Set 'dwell" time in Commander to suit your needs (I used 120 seconds) 3. Launch Multipsk, press Commander button ,at bottom of Multipsk screen ,to link Commander and Multipsk for frequency information. 4. in Multipsk, activate PSK reporter DLL 5. In Multipsk, if interested in PSK data, choose PSK31 as the mode and then press "Panoromic" 6. When ready to look at the signals decoded and captured, examine the PSK reporter window in MultiPSK, you will see things like.. 22:26 PJ2MI PSK31 18101701 21:54 G3WXC PSK31 10140894 21:54 PA0DY PSK31 10141361 21:49 N7UF PSK31 18102092 So far, these two days of band scanning have only captured PSK31 signals via the Panoramic feature. It has not captured any RSIDs. I am not sure if that is because there were NO RSIDs transmitted on the frequencies I was scanning, or if the RS-ID decode does not work in Multipsk when Panoroamic is enabled. I will do some more testing tomorrow as I check the frequencies suggested by Rein. Andy K3UK
