Re: [IPOL discuss] libconfig

2018-03-31 Thread Miguel Colom 

Quoting Mariano Rodríguez :


Dear all,

I have proposed to the IPOL team to install the libconfig package (which is
on all repos) and they have accepted. If anyone is against it, please state
your reasons or otherwise the IPOL team will proceed to the installation of
it.


Dear Mariano,

The libconfig library has been installed in all our servers.

As a reminder, let me explain how the installation of libraries upon  
request works in IPOL:


- Anyone can ask the installation of a library if it's needed for a  
particular demo and it's deemed useful for others.


- The IPOL team studies the request and they will accept or reject its  
installation. The reason why a particular library might be rejected  
includes that it might not be mature enough, that it's not part of  
Debian Stable, or that there are better alternatives.


- Note that the fact that a library is available for the demos doesn't  
mean necessarily that it's automatically accepted for publications.  
It's always OK for a workshop, but any new library needs to be  
accepted by the IPOL Editorial Board before it's used in a  
publication. It's the duty of the editor in charge of an article to  
check that the submitted code is only using libraries accepted in IPOL.


- Both MATLAB and Octave are accepted in IPOL. If you need a  
particular toolbox which is not available in MATLAB, you can request  
it. At that moment, it'll be a system administration task and it's up  
to the IPOL sysadmins to decide if the toolbox can be installed or  
not, and it's the decision of the Editorial Board to accept it for  
publications. And again, it's the duty of the editor in charge of an  
article to check that the submitted code is only using toolboxes  
accepted in IPOL.


Best,
Miguel



Cheers,

Mariano





--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/

Re: [IPOL discuss] libconfig

2018-03-30 Thread Miguel Colom 

Quoting Pascal Monasse :


Dear Gabriele,


Using octave would be great (and faster than matlab by the way).
But for that I let you negotiate with Miguel.


That would be great. Let us see what Miguel says.


Dear all,

Octave is fully accepted in IPOL and therefore there's no problem on  
using it. MATLAB is also accepted, so you can choose if you prefer to  
run your code with Octave or with MATLAB.

I'd recommend Octave, but it's the choice of the author, of course.

Best,
Miguel





Regarding Matlab, I spent the last 5 hours trying to install this toolbox.
At last I found our product key so now we have the toolbox in matlab.


Wow, thanks a lot! Sorry that took you so much time.

Best,
Pascal



Best,
Gabriele


On Fri, Mar 30, 2018 at 2:39 PM, Pascal Monasse 

wrote:
> Dear Mariano,
>
> Thanks a lot for the feedback. I had the impression my request went into a
> black hole, this is reassuring. I understand Matlab is really a pain.
>
> Alternatively, my code works with GNU Octave. Would it be allowed to have
> a
> demo run with Octave?
>
> Best,
> Pascal
>
> On Friday, March 30, 2018 02:34:11 PM Mariano Rodríguez wrote:
> > Dear Pascal,
> >
> > In fact, at the time Gabriele and I tried to install the optimization
> > toolbox and we were stopped by the current MATLAB licence. We will try
> > again and see if there?s a way around this problem.
> >
> > We might have forgotten to communicate it back to the IPOL team. In any
> > case, we apologise for the inconvenience !
> >
> > Best Regards,
> >
> > Mariano & Gabriele
> >
> > 2018-03-30 9:33 GMT+02:00 Pascal Monasse :
> > > Dear Mariano,
> > >
> > > Nothing to say against libconfig.
> > >
> > > This is just to say that you are luckier than me: I have asked for
> > > installation of a single standard Matlab package several months ago,
>
> with
>
> > > no
> > > answer since. This is preventing me from submitting an article, which
>
> is
>
> > > otherwise ready.  Which channel did go through to have an answer?
> > >
> > > Hint to IPOL admins: any reaction to my request would be welcome.
> > >
> > > Best,
> > > Pascal
> > >
> > > On Thursday, March 29, 2018 03:54:35 PM Mariano Rodríguez wrote:
> > > > Dear all,
> > > >
> > > > I have proposed to the IPOL team to install the libconfig package
>
> (which
>
> > > is
> > >
> > > > on all repos) and they have accepted. If anyone is against it,
> > > > please
> > >
> > > state
> > >
> > > > your reasons or otherwise the IPOL team will proceed to the
>
> installation
>
> > > of
> > >
> > > > it.
> > > >
> > > > Cheers,
> > > >
> > > > Mariano
>
> --
> IPOL - Image Processing On Line   - http://ipol.im/
>
> contact e...@ipol.im  - http://www.ipol.im/meta/contact/
> news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
> announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
> discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/


--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/





--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/

Re: [IPOL discuss] libconfig

2018-03-30 Thread Gabriele Facciolo 
On Fri, Mar 30, 2018 at 4:01 PM, Pascal Monasse 
wrote:

> Dear Gabriele,
>
> > Using octave would be great (and faster than matlab by the way).
> > But for that I let you negotiate with Miguel.
>
> That would be great. Let us see what Miguel says.
>
> > Regarding Matlab, I spent the last 5 hours trying to install this
> toolbox.
> > At last I found our product key so now we have the toolbox in matlab.
>
> Wow, thanks a lot! Sorry that took you so much time.
>


Don't worry, matlab is always a bit messy: keys, activation codes,
licenses...

:)


>
> Best,
> Pascal
>
> >
> > Best,
> > Gabriele
> >
> >
> > On Fri, Mar 30, 2018 at 2:39 PM, Pascal Monasse  >
> >
> > wrote:
> > > Dear Mariano,
> > >
> > > Thanks a lot for the feedback. I had the impression my request went
> into a
> > > black hole, this is reassuring. I understand Matlab is really a pain.
> > >
> > > Alternatively, my code works with GNU Octave. Would it be allowed to
> have
> > > a
> > > demo run with Octave?
> > >
> > > Best,
> > > Pascal
> > >
> > > On Friday, March 30, 2018 02:34:11 PM Mariano Rodríguez wrote:
> > > > Dear Pascal,
> > > >
> > > > In fact, at the time Gabriele and I tried to install the optimization
> > > > toolbox and we were stopped by the current MATLAB licence. We will
> try
> > > > again and see if there’s a way around this problem.
> > > >
> > > > We might have forgotten to communicate it back to the IPOL team. In
> any
> > > > case, we apologise for the inconvenience !
> > > >
> > > > Best Regards,
> > > >
> > > > Mariano & Gabriele
> > > >
> > > > 2018-03-30 9:33 GMT+02:00 Pascal Monasse :
> > > > > Dear Mariano,
> > > > >
> > > > > Nothing to say against libconfig.
> > > > >
> > > > > This is just to say that you are luckier than me: I have asked for
> > > > > installation of a single standard Matlab package several months
> ago,
> > >
> > > with
> > >
> > > > > no
> > > > > answer since. This is preventing me from submitting an article,
> which
> > >
> > > is
> > >
> > > > > otherwise ready.  Which channel did go through to have an answer?
> > > > >
> > > > > Hint to IPOL admins: any reaction to my request would be welcome.
> > > > >
> > > > > Best,
> > > > > Pascal
> > > > >
> > > > > On Thursday, March 29, 2018 03:54:35 PM Mariano Rodríguez wrote:
> > > > > > Dear all,
> > > > > >
> > > > > > I have proposed to the IPOL team to install the libconfig package
> > >
> > > (which
> > >
> > > > > is
> > > > >
> > > > > > on all repos) and they have accepted. If anyone is against it,
> > > > > > please
> > > > >
> > > > > state
> > > > >
> > > > > > your reasons or otherwise the IPOL team will proceed to the
> > >
> > > installation
> > >
> > > > > of
> > > > >
> > > > > > it.
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > > Mariano
> > >
> > > --
> > > IPOL - Image Processing On Line   - http://ipol.im/
> > >
> > > contact e...@ipol.im  - http://www.ipol.im/meta/contact/
> > > news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
> > > announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
> > > discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/
>
>
--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/

Re: [IPOL discuss] libconfig

2018-03-30 Thread Pascal Monasse 
Dear Gabriele,

> Using octave would be great (and faster than matlab by the way).
> But for that I let you negotiate with Miguel.

That would be great. Let us see what Miguel says.

> Regarding Matlab, I spent the last 5 hours trying to install this toolbox.
> At last I found our product key so now we have the toolbox in matlab.

Wow, thanks a lot! Sorry that took you so much time.

Best,
Pascal

> 
> Best,
> Gabriele
> 
> 
> On Fri, Mar 30, 2018 at 2:39 PM, Pascal Monasse 
> 
> wrote:
> > Dear Mariano,
> > 
> > Thanks a lot for the feedback. I had the impression my request went into a
> > black hole, this is reassuring. I understand Matlab is really a pain.
> > 
> > Alternatively, my code works with GNU Octave. Would it be allowed to have
> > a
> > demo run with Octave?
> > 
> > Best,
> > Pascal
> > 
> > On Friday, March 30, 2018 02:34:11 PM Mariano Rodríguez wrote:
> > > Dear Pascal,
> > > 
> > > In fact, at the time Gabriele and I tried to install the optimization
> > > toolbox and we were stopped by the current MATLAB licence. We will try
> > > again and see if there’s a way around this problem.
> > > 
> > > We might have forgotten to communicate it back to the IPOL team. In any
> > > case, we apologise for the inconvenience !
> > > 
> > > Best Regards,
> > > 
> > > Mariano & Gabriele
> > > 
> > > 2018-03-30 9:33 GMT+02:00 Pascal Monasse :
> > > > Dear Mariano,
> > > > 
> > > > Nothing to say against libconfig.
> > > > 
> > > > This is just to say that you are luckier than me: I have asked for
> > > > installation of a single standard Matlab package several months ago,
> > 
> > with
> > 
> > > > no
> > > > answer since. This is preventing me from submitting an article, which
> > 
> > is
> > 
> > > > otherwise ready.  Which channel did go through to have an answer?
> > > > 
> > > > Hint to IPOL admins: any reaction to my request would be welcome.
> > > > 
> > > > Best,
> > > > Pascal
> > > > 
> > > > On Thursday, March 29, 2018 03:54:35 PM Mariano Rodríguez wrote:
> > > > > Dear all,
> > > > > 
> > > > > I have proposed to the IPOL team to install the libconfig package
> > 
> > (which
> > 
> > > > is
> > > > 
> > > > > on all repos) and they have accepted. If anyone is against it,
> > > > > please
> > > > 
> > > > state
> > > > 
> > > > > your reasons or otherwise the IPOL team will proceed to the
> > 
> > installation
> > 
> > > > of
> > > > 
> > > > > it.
> > > > > 
> > > > > Cheers,
> > > > > 
> > > > > Mariano
> > 
> > --
> > IPOL - Image Processing On Line   - http://ipol.im/
> > 
> > contact e...@ipol.im  - http://www.ipol.im/meta/contact/
> > news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
> > announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
> > discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/

--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/

[IPOL discuss] libconfig

2018-03-29 Thread Mariano Rodríguez 
Dear all,

I have proposed to the IPOL team to install the libconfig package (which is
on all repos) and they have accepted. If anyone is against it, please state
your reasons or otherwise the IPOL team will proceed to the installation of
it.

Cheers,

Mariano
--
IPOL - Image Processing On Line   - http://ipol.im/

contact e...@ipol.im  - http://www.ipol.im/meta/contact/
news+feeds  twitter @IPOL_journal - http://www.ipol.im/meta/feeds/
announces   annou...@list.ipol.im - http://tools.ipol.im/mm/announce/
discussions discuss@list.ipol.im  - http://tools.ipol.im/mm/discuss/