Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
The quick workaround is to request PNG. Ian On 10 Dec 2013 20:46, Stephen Woodbridge wood...@swoodbridge.com wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/ wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6. nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Thanks for your quick response. From firebug I captured the request that is being made. Here is an example: http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=FORMAT=image%2FjpegSRS=EPSG%3A4326BBOX=-45,-45,0,0WIDTH=256HEIGHT=256 I would like to note, that this seems to be effecting the WMS examples on the openlayers.org website as well. Mike On 12/10/2013 3:44 PM, Stephen Woodbridge wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicFORMAT=image%2FpngSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=SRS=EPSG%3A4326BBOX=-135,0,-90,45WIDTH=256HEIGHT=256 seems to give me the exact same response. Mike On 12/10/2013 3:50 PM, Ian Turton wrote: The quick workaround is to request PNG. Ian On 10 Dec 2013 20:46, Stephen Woodbridge wood...@swoodbridge.com mailto:wood...@swoodbridge.com wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms http://vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org mailto:Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org mailto:Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
OK, interestingly that url works fine for me! But if I SHIFT-refresh a bunch of times I can get that error. So it seems that the load balancer is hitting one/some? server that is miss configured. -Steve On 12/10/2013 3:50 PM, Mike Toothaker wrote: Thanks for your quick response. From firebug I captured the request that is being made. Here is an example: http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=FORMAT=image%2FjpegSRS=EPSG%3A4326BBOX=-45,-45,0,0WIDTH=256HEIGHT=256 I would like to note, that this seems to be effecting the WMS examples on the openlayers.org website as well. Mike On 12/10/2013 3:44 PM, Stephen Woodbridge wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
That is interesting. I seem to get it all the time. Is there anything that you can suggest as for an avenue of recourse from my end? Do I just wait until someone notices the misconfiguration? Can I find out which server has the misconfiguration and attempt to contact the admin? Thanks again for your quick help. Mike On 12/10/2013 4:12 PM, Stephen Woodbridge wrote: OK, interestingly that url works fine for me! But if I SHIFT-refresh a bunch of times I can get that error. So it seems that the load balancer is hitting one/some? server that is miss configured. -Steve On 12/10/2013 3:50 PM, Mike Toothaker wrote: Thanks for your quick response. From firebug I captured the request that is being made. Here is an example: http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=FORMAT=image%2FjpegSRS=EPSG%3A4326BBOX=-45,-45,0,0WIDTH=256HEIGHT=256 I would like to note, that this seems to be effecting the WMS examples on the openlayers.org website as well. Mike On 12/10/2013 3:44 PM, Stephen Woodbridge wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Create a ticket here: http://trac.osgeo.org/osgeo/newticket?component=Systems%20Admin And add my comments to the ticket. This has been an open issues for about a month and come up on Discuss a few times so there may already be a ticket for it. -Steve On 12/10/2013 4:19 PM, Mike Toothaker wrote: That is interesting. I seem to get it all the time. Is there anything that you can suggest as for an avenue of recourse from my end? Do I just wait until someone notices the misconfiguration? Can I find out which server has the misconfiguration and attempt to contact the admin? Thanks again for your quick help. Mike On 12/10/2013 4:12 PM, Stephen Woodbridge wrote: OK, interestingly that url works fine for me! But if I SHIFT-refresh a bunch of times I can get that error. So it seems that the load balancer is hitting one/some? server that is miss configured. -Steve On 12/10/2013 3:50 PM, Mike Toothaker wrote: Thanks for your quick response. From firebug I captured the request that is being made. Here is an example: http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=FORMAT=image%2FjpegSRS=EPSG%3A4326BBOX=-45,-45,0,0WIDTH=256HEIGHT=256 I would like to note, that this seems to be effecting the WMS examples on the openlayers.org website as well. Mike On 12/10/2013 3:44 PM, Stephen Woodbridge wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Done and for anyone interested the ticket is here : http://trac.osgeo.org/osgeo/ticket/1264 Feel free to add more info. Thanks again, Mike On 12/10/2013 4:29 PM, Stephen Woodbridge wrote: Create a ticket here: http://trac.osgeo.org/osgeo/newticket?component=Systems%20Admin And add my comments to the ticket. This has been an open issues for about a month and come up on Discuss a few times so there may already be a ticket for it. -Steve On 12/10/2013 4:19 PM, Mike Toothaker wrote: That is interesting. I seem to get it all the time. Is there anything that you can suggest as for an avenue of recourse from my end? Do I just wait until someone notices the misconfiguration? Can I find out which server has the misconfiguration and attempt to contact the admin? Thanks again for your quick help. Mike On 12/10/2013 4:12 PM, Stephen Woodbridge wrote: OK, interestingly that url works fine for me! But if I SHIFT-refresh a bunch of times I can get that error. So it seems that the load balancer is hitting one/some? server that is miss configured. -Steve On 12/10/2013 3:50 PM, Mike Toothaker wrote: Thanks for your quick response. From firebug I captured the request that is being made. Here is an example: http://vmap0.tiles.osgeo.org/wms/vmap0?LAYERS=basicSERVICE=WMSVERSION=1.1.1REQUEST=GetMapSTYLES=FORMAT=image%2FjpegSRS=EPSG%3A4326BBOX=-45,-45,0,0WIDTH=256HEIGHT=256 I would like to note, that this seems to be effecting the WMS examples on the openlayers.org website as well. Mike On 12/10/2013 3:44 PM, Stephen Woodbridge wrote: Can you post the full url to a single tile that is generating this error message? If mapserver has been upgraded to v6.4 the GD/JPEG support might not be built into it and you might have better luck requesting map_imagetype=jpeg or map_imagetype=png -Steve W On 12/10/2013 3:09 PM, mtoothaker wrote: As of last week sometime this started happening to us as well. We are interfacing through OpenLayers, everything was working fine and then all of a sudden we stop getting tiles from http://vmap0.tiles.osgeo.org/wms/vmap0 and when I copy the request to my browser address bar I get in reply : loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. . When I started reading this thead I was hoping to find my solution, but I don't know how to follow up. Thanks in advanced. Mike Frank Warmerdam wrote Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton lt; ijturton@ gt; wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@.osgeo http://lists.osgeo.org/mailman/listinfo/discuss -- View this message in context: http://osgeo-org.1560.x6.nabble.com/vmap0-tiles-osgeo-org-broken-tp5091321p5093633.html Sent from the OSGeo Discuss mailing list archive at Nabble.com. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
[OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] vmap0.tiles.osgeo.org broken?
Ian, Hmm, interesting. I was under the vague belief that the vmap0 tiles are being generated by a variety of servers and that one of those was the webextra VM at OSU OSL which has been having problems. When I login I see I'm on sphere at telescience. Can you give me the specific request you issue to give that response. It may be that it is misconfigured for the requests you are making, but it is still handling normal tile requests ok. +cc Martin Spott who I think knows a bunch about this service. We could likely drop osgeo discuss off this thread. Best regards, Frank On Tue, Nov 26, 2013 at 8:41 AM, Ian Turton ijtur...@gmail.com wrote: Does anyone know who to ask about vmap0.tiles.osgeo.org/wms always returning loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver GD/JPEG, but this driver isn't configured. Cheers Ian -- Ian Turton ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss -- ---+-- I set the clouds in motion - turn up | Frank Warmerdam, warmer...@pobox.com light and sound - activate the windows | http://pobox.com/~warmerdam and watch the world go round - Rush| Geospatial Software Developer ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
