Re: [slim] Call for testers! Daphile
Does TIDAL work in LMS? Yes, of course. -- Michael ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Installing extra packages on piCorePlayer
Headphones is the correct output for onboard audio in pCP7 piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Installing extra packages on piCorePlayer
Jeff07971 wrote: > I ALWAYS resize the fs to full sdcard capacity before doing anything I did try that at one point, but it didn't seem to help. Jeff07971 wrote: > Maybe its ANY operation rather than changing O/P device I guess that's possible. Jeff07971 wrote: > Edit2: I Used piCorePlayer7.0.0b6 I'll try using that version and see what happens. But probably not for a couple of days now. (Interesting that the default output device for you was CARD=Headphones rather than CARD=ALSA. I'll check that when I try 7.0.0b6). Merry Christmas! Transporter -> ATC SCM100A cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Installing extra packages on piCorePlayer
Hi Cliveb Glad you got it working, if by a long winded process ! However > So it would seem that switching the audio output device is the crucial > step that gets everything going. > (I speculate that the reason others say "it just works" is perhaps > because they had already set their output device to something other than > the default analog audio). I don't think that this can be the case, as when testing for you I did not change the output device at all ! BUT I ALWAYS resize the fs to full sdcard capacity before doing anything Maybe its ANY operation rather than changing O/P device I'll give it a try when I get a minute and report back Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X=903953=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Installing extra packages on piCorePlayer
OK, today the GPIO pin suddenly started working as desired, but I had no idea which of the many things I fiddled with had done the trick. So I've spent a lot of time experimenting, being very methodical to try and find out what fixed it. Here's what I found. Bear in mind this is on a RPi4 using piCorePlayer 6.1.0. 1. Flash SD card with a fresh piCorePlayer image and boot up. 2. SSH in and check some things: a). GPIO 13 is in mode IN, voltage low. b). ps -ef shows squeezelite running with these options: *-o hw:CARD=ALSA -a 80 1* 3. Try playing a track: No audio, pause causes track to restart rather than pause, seek skips to position but then plays back a loop of about 5 secs. 4. Set power on/off to GPIO 13, active high. Squeezelite restarts. 5. readall.sh now shows GPIO in mode OUT, voltage high (even though player is off). 6. Switching player on & off makes no difference; GPIO 13 remains high at all times. 7. ps -ef shows squeezelite with options: *-o hw:CARD=ALSA -a 80 1 -G 13 H* 8. Try playing a track: no change, behaviour as in (3) above. 9. Restart squeezelite: no change. 10. Reboot piCorePlayer: no change. 11. Change audio output to RPiDAC and save, then back to analog audio and save. Squeezelite fails to restart. 12. Reboot. 13. Now we have a fully functioning player! a). GPIO 13 behaves as required: voltage low when player is off, high when player is on. b). Playback works correctly: pause pauses, seek skips as it should. c). ps -ef shows squeezelite options: *-o hw:CARD=ALSA -a 80 0 -G 13 H* So it would seem that switching the audio output device is the crucial step that gets everything going. (I speculate that the reason others say "it just works" is perhaps because they had already set their output device to something other than the default analog audio). I am also intruiged by the change in the parameters to the -a option that happened. That second parameter (0 instead of 1) is presumably the thing that got the audio output working. The documentation says that this is the "period count or size in bytes". No idea what that means. In summary, to get it working on the Pi4, the minimum sequence of steps is: 1. Flash SD card with piCorePlayer, boot up. 2. Set power on/off to desired GPIO. 3. Set audio output to something else, save. 4. Set audio output back to analog, save. 5. Reboot. 6. Player now behaves as expected. Mysteries that remain: 1. Why does changing the audio output fix the behaviour of the GPIO control? 2. Why did pause and seek do the wrong things until the audio output was fixed? (It's not like LMS has any idea that the player's output device is set up wrong). Thanks to everyone who helped me with this. It was a bit of an ordeal, but of course orders of magnitude less work than creating my own plugin, as I had originally thought I would need to do! Transporter -> ATC SCM100A cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=113507 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Call for testers! Daphile
mherger wrote: > > Does tidel work for daphile? I can not understand ... > > Please get in touch with the Daphile developer. Only he knows. > > -- > > Michael Does TIDAL work in LMS? vladislav's Profile: http://forums.slimdevices.com/member.php?userid=71115 View this thread: http://forums.slimdevices.com/showthread.php?t=99132 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss