Re: [slim] SB3 voltage range
Thanks all. Really appreciate the comments. Will ask around if someone has another ps that I can test with but looking less likely as a possible cause. I will park it for a bit while I work on getting IRBlaster working with squeezelite which will influence my decision on doing the caps.. cheers davemal's Profile: http://forums.slimdevices.com/member.php?userid=21639 View this thread: http://forums.slimdevices.com/showthread.php?t=112024 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
[slim] SB3 voltage range
Hello, The last few months my SB3 has been resetting itself after random periods of time. I have ruled out wifi and done all the resets. My power supply is providing 4.9v with no load and 4.79/4.8v when powered up. Does anyone know if this is too low ? I have a second ps that I have tested with but it still rebooted and the voltage is similar at a shade under 5v. Just trying to see if anyone has experience with this - before I potentially waste money on a new ps to see if it is... Really, really want to rule everything out before going down the replace the caps route. cheers davemal's Profile: http://forums.slimdevices.com/member.php?userid=21639 View this thread: http://forums.slimdevices.com/showthread.php?t=112024 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Net::UDAP - SqueezeBox Receiver configuration tool
I am also having some trouble getting this working, with a boom. One of my booms has a dead screen and I want to set it up so that I can control it via iPeng. Before I had a brain explosion and did a fact reset, it was working aside from the screen. I booted with the '+' depressed but nothing is discovered. I tested the process with a working boom and it would not discover either. I am running Fedora 8 as a VM on a windows host with a direct connection (X-over cable) between my laptop and the boom. I put the boom end into another laptop and run wireshark and could confirm that the broadcasts are being sent out on the wire. When I run wireshark on the local machine with the boom connected, I see the broadcast go out but no response from the boom. So it seems that the boom is not responding for some reason. I have tried sending the discovery packet at various times during startup as well as after selecting 'English' and then both wired and wireless networks. Any ideas on what I could try to get the boom to respond ? Comments greatly appreciated. cheers davemal's Profile: http://forums.slimdevices.com/member.php?userid=21639 View this thread: http://forums.slimdevices.com/showthread.php?t=57861 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
