Re: [Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
On Thu, May 26, 2011 at 3:08 AM, Marcus D. Leech mle...@ripnet.com wrote: On 05/25/2011 09:01 PM, Arturo Rinaldi wrote: i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : *export PATH=/usr/libexec/sdcc:$PATH *as written in the build guide but I still get the error in the configure process : *USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp.* Where am i wrong ? If I launch from terminal *$ sdcc -v * it returns : *$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)* thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. A few points: If you're using UHD, you don't need component USRP. Since Fedora 14, they have shipped SDCC version 3.0 which has different command names, and also some difference syntax for built-in variable-type intrinsics, so the USRP1 firmware won't build under SDCC-3.0 anyway. The configure script for Gnu Radio looks for SDCC using the SDCC version 2.X command names, and so for a system with SDCC 3.0, this will fail. But, once again, if you're using UHD (which I *strongly* recommend), you don't need the component usrp and gr-usrp to be built anyway. I haven't upgraded any of my systems to F15 yet, but when I do, expect the famous (almost!) build-gnuradio script to get updated to deal with F15. -- Principal Investigator Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org And if you do really want to get the usrp and gr-usrp components to build, you should be able to easily install a 2.9 version of SDCC. Tom ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
On either my Ubuntu box or my Fedora box, 2.9.0 fails. I used 2.8.0 and all is well. I get it from sdcc sourceforge site and was done in a few minutes. Bob On May 26, 2011 6:15 AM, Tom Rondeau trondeau1...@gmail.com wrote: On Thu, May 26, 2011 at 3:08 AM, Marcus D. Leech mle...@ripnet.com wrote: On 05/25/2011 09:01 PM, Arturo Rinaldi wrote: i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : *export PATH=/usr/libexec/sdcc:$PATH *as written in the build guide but I still get the error in the configure process : *USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp.* Where am i wrong ? If I launch from terminal *$ sdcc -v * it returns : *$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)* thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. A few points: If you're using UHD, you don't need component USRP. Since Fedora 14, they have shipped SDCC version 3.0 which has different command names, and also some difference syntax for built-in variable-type intrinsics, so the USRP1 firmware won't build under SDCC-3.0 anyway. The configure script for Gnu Radio looks for SDCC using the SDCC version 2.X command names, and so for a system with SDCC 3.0, this will fail. But, once again, if you're using UHD (which I *strongly* recommend), you don't need the component usrp and gr-usrp to be built anyway. I haven't upgraded any of my systems to F15 yet, but when I do, expect the famous (almost!) build-gnuradio script to get updated to deal with F15. -- Principal Investigator Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org And if you do really want to get the usrp and gr-usrp components to build, you should be able to easily install a 2.9 version of SDCC. Tom ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
Il 26/05/2011 13:05, Robert McGwier ha scritto: On either my Ubuntu box or my Fedora box, 2.9.0 fails. I used 2.8.0 and all is well. I get it from sdcc sourceforge site and was done in a few minutes. Bob On May 26, 2011 6:15 AM, Tom Rondeau trondeau1...@gmail.com mailto:trondeau1...@gmail.com wrote: On Thu, May 26, 2011 at 3:08 AM, Marcus D. Leech mle...@ripnet.com mailto:mle...@ripnet.com wrote: On 05/25/2011 09:01 PM, Arturo Rinaldi wrote: i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : *export PATH=/usr/libexec/sdcc:$PATH *as written in the build guide but I still get the error in the configure process : *USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp.* Where am i wrong ? If I launch from terminal *$ sdcc -v * it returns : *$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)* thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. A few points: If you're using UHD, you don't need component USRP. Since Fedora 14, they have shipped SDCC version 3.0 which has different command names, and also some difference syntax for built-in variable-type intrinsics, so the USRP1 firmware won't build under SDCC-3.0 anyway. The configure script for Gnu Radio looks for SDCC using the SDCC version 2.X command names, and so for a system with SDCC 3.0, this will fail. But, once again, if you're using UHD (which I *strongly* recommend), you don't need the component usrp and gr-usrp to be built anyway. I haven't upgraded any of my systems to F15 yet, but when I do, expect the famous (almost!) build-gnuradio script to get updated to deal with F15. -- Principal Investigator Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org http://www.sbrac.org And if you do really want to get the usrp and gr-usrp components to build, you should be able to easily install a 2.9 version of SDCC. Tom ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio thank you very much to all of you. I'll do my test on my Fedora 15 system as soon as possible. I think the best solution is to build 2.9.0-7 from source and then install. @ Bob never experienced any issue on Ubuntu with sdcc 2.9.0-5. I also remember that building from source on a Fedora 14 worked well like described in the guide on the gnuradio website. Best Regards to all, Arturo ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
On Thu, May 26, 2011 at 12:31 PM, Arturo Rinaldi arty.n...@gmail.comwrote: Il 26/05/2011 13:05, Robert McGwier ha scritto: On either my Ubuntu box or my Fedora box, 2.9.0 fails. I used 2.8.0 and all is well. I get it from sdcc sourceforge site and was done in a few minutes. Bob On May 26, 2011 6:15 AM, Tom Rondeau trondeau1...@gmail.com wrote: On Thu, May 26, 2011 at 3:08 AM, Marcus D. Leech mle...@ripnet.com wrote: On 05/25/2011 09:01 PM, Arturo Rinaldi wrote: i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : *export PATH=/usr/libexec/sdcc:$PATH *as written in the build guide but I still get the error in the configure process : *USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp.* Where am i wrong ? If I launch from terminal *$ sdcc -v * it returns : *$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)* thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. A few points: If you're using UHD, you don't need component USRP. Since Fedora 14, they have shipped SDCC version 3.0 which has different command names, and also some difference syntax for built-in variable-type intrinsics, so the USRP1 firmware won't build under SDCC-3.0 anyway. The configure script for Gnu Radio looks for SDCC using the SDCC version 2.X command names, and so for a system with SDCC 3.0, this will fail. But, once again, if you're using UHD (which I *strongly* recommend), you don't need the component usrp and gr-usrp to be built anyway. I haven't upgraded any of my systems to F15 yet, but when I do, expect the famous (almost!) build-gnuradio script to get updated to deal with F15. -- Principal Investigator Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org And if you do really want to get the usrp and gr-usrp components to build, you should be able to easily install a 2.9 version of SDCC. Tom ___ Discuss-gnuradio mailing listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio thank you very much to all of you. I'll do my test on my Fedora 15 system as soon as possible. I think the best solution is to build 2.9.0-7 from source and then install. @ Bob never experienced any issue on Ubuntu with sdcc 2.9.0-5. I also remember that building from source on a Fedora 14 worked well like described in the guide on the gnuradio website. Best Regards to all, Arturo Thanks all. I've built using SDCC 2.9.0 in Ubuntu, which is the native version in 11.04, with no problems. So I didn't build or install it from another package. If someone else is having issues with a 2.9 version and can confirm Bob's problem, let me know. Tom ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : /export PATH=/usr/libexec/sdcc:$PATH /as written in the build guide but I still get the error in the configure process : /USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp./ Where am i wrong ? If I launch from terminal /$ sdcc -v / it returns : /$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)/ thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Building gnuradio 3.3.0 on Fedora 15 (issue with SDCC)
On 05/25/2011 09:01 PM, Arturo Rinaldi wrote: i have an issue regarding the SDCC executable in the building of gnuradio 3.3.0 on Fedora 15. I set up the PATH in my *.bashrc* file as : /export PATH=/usr/libexec/sdcc:$PATH /as written in the build guide but I still get the error in the configure process : /USRP requires sdcc. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. Not building component usrp./ Where am i wrong ? If I launch from terminal /$ sdcc -v / it returns : /$ SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Apr 13 2011) (Linux)/ thx in advance. All the others pre-requisites are fully satisfied. Regards, Arturo. A few points: If you're using UHD, you don't need component USRP. Since Fedora 14, they have shipped SDCC version 3.0 which has different command names, and also some difference syntax for built-in variable-type intrinsics, so the USRP1 firmware won't build under SDCC-3.0 anyway. The configure script for Gnu Radio looks for SDCC using the SDCC version 2.X command names, and so for a system with SDCC 3.0, this will fail. But, once again, if you're using UHD (which I *strongly* recommend), you don't need the component usrp and gr-usrp to be built anyway. I haven't upgraded any of my systems to F15 yet, but when I do, expect the famous (almost!) build-gnuradio script to get updated to deal with F15. -- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
