[Discuss-gnuradio] Implementation of ieee 802-11 transeiver
Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Implementation of ieee 802-11 transeiver
thanks a lot, it shows me this wafa@wafa-K46CB:~/pybombs$ ./pybombs env Settled on prefix: /home/wafa/target Initializing environmental variables... /home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/:/home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/ -- loading recipes --- Loading recipes ... Loading recipes ... done -- loading recipes finished -- Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target bash: source: /home/wafa/target: is a directory wafa@wafa-K46CB:~/pybombs$ /setup_env.sh is this mean that is ok ? 2014-05-10 19:43 GMT+02:00 Kiran Karra kiran.ka...@vt.edu: You may not have told pybombs to write out the environment. Goto your pybombs directory and type: ./pybombs env And that will wrote out the environment to the prefix directory. Then you should be able to source the environment script. On May 10, 2014 1:38:49 PM EDT, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error -- Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Implementation of ieee 802-11 transeiver
sorry this message is shown wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ 2014-05-10 19:53 GMT+02:00 Wafa Elhajhmida wafa.elhaj.hm...@gmail.com: thanks a lot, it shows me this wafa@wafa-K46CB:~/pybombs$ ./pybombs env Settled on prefix: /home/wafa/target Initializing environmental variables... /home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/:/home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/ -- loading recipes --- Loading recipes ... Loading recipes ... done -- loading recipes finished -- Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target bash: source: /home/wafa/target: is a directory wafa@wafa-K46CB:~/pybombs$ /setup_env.sh is this mean that is ok ? 2014-05-10 19:43 GMT+02:00 Kiran Karra kiran.ka...@vt.edu: You may not have told pybombs to write out the environment. Goto your pybombs directory and type: ./pybombs env And that will wrote out the environment to the prefix directory. Then you should be able to source the environment script. On May 10, 2014 1:38:49 PM EDT, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error -- Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Implementation of ieee 802-11 transeiver
You have a line break there accidentally, it should be on one line. If you run: echo source /home/wafa/target/setup_env.sh ~/.bashrc Then this will add the line to the end of your .bashrc startup file. Then type: source ~/.bashrc ...which will then activate it. Mike -- Mike Jameson M0MIK BSc MIET Email: m...@scanoo.com Web: http://scanoo.com On Sat, May 10, 2014 at 6:53 PM, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: thanks a lot, it shows me this wafa@wafa-K46CB:~/pybombs$ ./pybombs env Settled on prefix: /home/wafa/target Initializing environmental variables... /home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/:/home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/ -- loading recipes --- Loading recipes ... Loading recipes ... done -- loading recipes finished -- Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target bash: source: /home/wafa/target: is a directory wafa@wafa-K46CB:~/pybombs$ /setup_env.sh is this mean that is ok ? 2014-05-10 19:43 GMT+02:00 Kiran Karra kiran.ka...@vt.edu: You may not have told pybombs to write out the environment. Goto your pybombs directory and type: ./pybombs env And that will wrote out the environment to the prefix directory. Then you should be able to source the environment script. On May 10, 2014 1:38:49 PM EDT, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error -- Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Implementation of ieee 802-11 transeiver
thanks. I typed these commands wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ echo source /home/wafa/target/setup_env.sh ~/.bashrc wafa@wafa-K46CB:~/pybombs$ source ~/.bashrc plz what shall I do now to have gnuradio 3.7 2014-05-10 19:59 GMT+02:00 Mike Jameson m...@scanoo.com: You have a line break there accidentally, it should be on one line. If you run: echo source /home/wafa/target/setup_env.sh ~/.bashrc Then this will add the line to the end of your .bashrc startup file. Then type: source ~/.bashrc ...which will then activate it. Mike -- Mike Jameson M0MIK BSc MIET Email: m...@scanoo.com Web: http://scanoo.com On Sat, May 10, 2014 at 6:53 PM, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: thanks a lot, it shows me this wafa@wafa-K46CB:~/pybombs$ ./pybombs env Settled on prefix: /home/wafa/target Initializing environmental variables... /home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/:/home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/ -- loading recipes --- Loading recipes ... Loading recipes ... done -- loading recipes finished -- Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target bash: source: /home/wafa/target: is a directory wafa@wafa-K46CB:~/pybombs$ /setup_env.sh is this mean that is ok ? 2014-05-10 19:43 GMT+02:00 Kiran Karra kiran.ka...@vt.edu: You may not have told pybombs to write out the environment. Goto your pybombs directory and type: ./pybombs env And that will wrote out the environment to the prefix directory. Then you should be able to source the environment script. On May 10, 2014 1:38:49 PM EDT, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error -- Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] Implementation of ieee 802-11 transeiver
cross your fingers and run gnuradio-companion at the command prompt :) -- Mike Jameson M0MIK BSc MIET Email: m...@scanoo.com Web: http://scanoo.com On Sat, May 10, 2014 at 7:06 PM, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: thanks. I typed these commands wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ echo source /home/wafa/target/setup_env.sh ~/.bashrc wafa@wafa-K46CB:~/pybombs$ source ~/.bashrc plz what shall I do now to have gnuradio 3.7 2014-05-10 19:59 GMT+02:00 Mike Jameson m...@scanoo.com: You have a line break there accidentally, it should be on one line. If you run: echo source /home/wafa/target/setup_env.sh ~/.bashrc Then this will add the line to the end of your .bashrc startup file. Then type: source ~/.bashrc ...which will then activate it. Mike -- Mike Jameson M0MIK BSc MIET Email: m...@scanoo.com Web: http://scanoo.com On Sat, May 10, 2014 at 6:53 PM, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: thanks a lot, it shows me this wafa@wafa-K46CB:~/pybombs$ ./pybombs env Settled on prefix: /home/wafa/target Initializing environmental variables... /home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/:/home/wafa/target/python/:/home/wafa/target/lib/python2.6/site-packages/:/home/wafa/target/lib64/python2.6/site-packages/:/home/wafa/target/lib/python2.6/dist-packages/:/home/wafa/target/lib64/python2.6/dist-packages/:/home/wafa/target/lib/python2.7/site-packages/:/home/wafa/target/lib64/python2.7/site-packages/:/home/wafa/target/lib/python2.7/dist-packages/:/home/wafa/target/lib64/python2.7/dist-packages/ -- loading recipes --- Loading recipes ... Loading recipes ... done -- loading recipes finished -- Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: source /home/wafa/target/setup_env.sh wafa@wafa-K46CB:~/pybombs$ source /home/wafa/target bash: source: /home/wafa/target: is a directory wafa@wafa-K46CB:~/pybombs$ /setup_env.sh is this mean that is ok ? 2014-05-10 19:43 GMT+02:00 Kiran Karra kiran.ka...@vt.edu: You may not have told pybombs to write out the environment. Goto your pybombs directory and type: ./pybombs env And that will wrote out the environment to the prefix directory. Then you should be able to source the environment script. On May 10, 2014 1:38:49 PM EDT, Wafa Elhajhmida wafa.elhaj.hm...@gmail.com wrote: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I tried to install gnuradio 3.7 byPyBOMBS in this link http://gnuradio.org/redmine/projects/pybombs/wiki/QuickStart When I typed this command *./pybombs install gnuradio* it works. But when I typed this command wafa@wafa-K46CB:~/pybombs$ source $prefix/setup_env.sh it shows me this: bash: /setup_env.sh: No such file or directory wafa@wafa-K46CB:~/pybombs$ plz how to deal with this error. In fact, when I typed /pybombs install gnuradio it asks me to enter prefix and other staffs I have just typed enter when it asked me to put these variables. is this can harm . what sall I do to correct this error -- Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Discuss-gnuradio] implementation of ieee 802-11 transeiver
Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I arrive to the step IT++, when I typed sudo port install itpp it shows me : wafa@wafa-K46CB:~$ sudo port install itpp sudo: port: command not found plz how to deal with this error. Best regards, Wafa ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Re: [Discuss-gnuradio] implementation of ieee 802-11 transeiver
I tested sudo apt-get install libitpp-dev and it works 2014-05-10 20:37 GMT+02:00 Wafa Elhajhmida wafa.elhaj.hm...@gmail.com: Hi, I would like to implement a transceiver in USRP E 110 with gnuradio. For that I found a code concerning an implementation of ieee 802-11 of a transeiver with USRP N 210 descibed in this https://github.com/bastibl/gr-ieee802-11. To implement it I followed the script read me mentionned in this link https://github.com/bastibl/gr-ieee802-11. But when I arrive to the step IT++, when I typed sudo port install itpp it shows me : wafa@wafa-K46CB:~$ sudo port install itpp sudo: port: command not found plz how to deal with this error. Best regards, Wafa ___ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
