Hi Ton - As always, I recommend using MacPorts to do your dirty work;
check out the GR install guide
http://gnuradio.org/redmine/projects/gnuradio/wiki/MacInstall . Once
'port' is installed, getting GR is as simple as sudo port install
gnuradio.
For sdrplay: If you check out the Gqrx forum, you'll find a related
discussion here:
https://groups.google.com/forum/#!topic/gqrx/OtTNWVTTjFU . I offer a
patch for MacPorts' gr-osmosdr port that installs sdrplay as an optional
variant. What the OP found is, and this is not a great surprise, is that
sdrplay isn't really ready for OSX yet.
You can use Homebrew for GR, and a few folks I know do. I prefer to not
do that, because Homebrew installs into /usr/local, which is a standard
search path for most Unix-y tools is prone to being found before other
paths.
I you want specific help, email me off list. Homebrew is not my
specialty, but I'll do what I can.
Good luck! - MLD
On Sat, Aug 15, 2015, at 10:56 AM, Ton Machielsen wrote:
Mac OSX 10.10.4 gnuradio 3.7.7.1 homebrew Trying to get the SDPplay to
work using gr-osmosdr
I tried an innocent brew install gnuradio. That went wrong on the fact
that gnuradio was compiled against the homebrew python and when
launched uses the Darwin python as discussed here:
https://github.com/titanous/homebrew-gnuradio/issues/7. Haven't found
a good solution to that problem yet.
Then i used the workaround to export
DYLD_FRAMEWORK_PATH=/usr/local/lib:$DYLD_FRAMEWORK_PATH, uninstalled
gnuradio and installed it again. That went ok until i built gr-osmosdr
with the ENABLE_NONFREE option. Then the problem came back again.
Then i tried to build gnuradio from source hoping it would use the
system python and the problem would go away. That took a few hours
only to result in the same error.
So i removed all the dependencies and built those from source as well.
Now when building gnuradio i get the following error:
== cmake .. -DCMAKE_PREFIX_PATH=/usr/local/Cellar/gnuradio/3.7.7.1
== -DENABLE_DOXYGEN=Off -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPIL
== make make install
Error: No such file or directory -
/usr/local/Cellar/gnuradio/3.7.7.1/etc/gnuradio/conf.d/grc.conf
What's going on? Is there not a relative simple way to build gnuradio
on a Mac? I got all those problems while following the instructions on
https://github.com/metacollin/homebrew-gnuradio
Any suggestions would be appreciated,
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
