[Bug 67178] New: discrete radeon HD 6400M/7400M intense heating even though it's "off"

2013-07-22 Thread bugzilla-dae...@freedesktop.org 
https://bugs.freedesktop.org/show_bug.cgi?id=67178

  Priority: medium
Bug ID: 67178
  Assignee: dri-devel at lists.freedesktop.org
   Summary: discrete radeon HD 6400M/7400M intense heating even
though it's "off"
  Severity: normal
Classification: Unclassified
OS: Linux (All)
  Reporter: tpo_deb at sourcepole.ch
  Hardware: x86-64 (AMD64)
Status: NEW
   Version: XOrg CVS
 Component: DRM/Radeon
   Product: DRI

kernel 3.11-rc1 (also tested with 3.10 from Debian, 3.7, 3,2)

# lspci -vnnn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
  Generation Core Processor Family Integrated Graphics Controller
  [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
  [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
  (prog-if ff)

This is a HP Pavillon dv7 6130ez

Sometimes, at random, the radeon card goes into full heat production mode. This
seems to occur a while (a few minutes?) after wakeup from resume, however I'm
not sure about that. Suspending and resuming the laptop a few times (1 <= x <=
~4) seems to calm the card down again.

Power consumption according to powertop goes from ~14W up to ~50W. This happens
even though the card should be in theory switched off. Aka:

  # cat /sys/kernel/debug/vgaswitcheroo/switch
  0:IGD:+:Pwr::00:02.0
  1:DIS: :Off::01:00.0

  # echo IGD > /sys/kernel/debug/vgaswitcheroo/switch
  # echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

doesn't seem to have no effect whatsoever.

It *seems* that setting "radeon.dpm=1" kernel boot options and then:

  # echo "battery" > /sys/class/drm/card$no/device/power_dpm_state

puts the card in an "active" but "relatively low" power consumption mode. It is
then using about 20W (instead of the "normal" ~14W) so it's continuously faning
out slightly warm air. And it "seems that when the card is running in this
mode, then it won't get so often, or ever (I'm not very sure) into the berserk
heating mode.

The lowest observed power consumption of the laptop is ~7W. It'd be very nice
if it'd be possible to shut the card down electrically via software and stay in
this 7W mode.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-- next part --
An HTML attachment was scrubbed...
URL:

[Bug 67178] New: discrete radeon HD 6400M/7400M intense heating even though it's off

2013-07-22 Thread bugzilla-daemon 
https://bugs.freedesktop.org/show_bug.cgi?id=67178

  Priority: medium
Bug ID: 67178
  Assignee: dri-devel@lists.freedesktop.org
   Summary: discrete radeon HD 6400M/7400M intense heating even
though it's off
  Severity: normal
Classification: Unclassified
OS: Linux (All)
  Reporter: tpo_...@sourcepole.ch
  Hardware: x86-64 (AMD64)
Status: NEW
   Version: XOrg CVS
 Component: DRM/Radeon
   Product: DRI

kernel 3.11-rc1 (also tested with 3.10 from Debian, 3.7, 3,2)

# lspci -vnnn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
  Generation Core Processor Family Integrated Graphics Controller
  [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
  [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
  (prog-if ff)

This is a HP Pavillon dv7 6130ez

Sometimes, at random, the radeon card goes into full heat production mode. This
seems to occur a while (a few minutes?) after wakeup from resume, however I'm
not sure about that. Suspending and resuming the laptop a few times (1 = x =
~4) seems to calm the card down again.

Power consumption according to powertop goes from ~14W up to ~50W. This happens
even though the card should be in theory switched off. Aka:

  # cat /sys/kernel/debug/vgaswitcheroo/switch
  0:IGD:+:Pwr::00:02.0
  1:DIS: :Off::01:00.0

  # echo IGD  /sys/kernel/debug/vgaswitcheroo/switch
  # echo OFF  /sys/kernel/debug/vgaswitcheroo/switch

doesn't seem to have no effect whatsoever.

It *seems* that setting radeon.dpm=1 kernel boot options and then:

  # echo battery  /sys/class/drm/card$no/device/power_dpm_state

puts the card in an active but relatively low power consumption mode. It is
then using about 20W (instead of the normal ~14W) so it's continuously faning
out slightly warm air. And it seems that when the card is running in this
mode, then it won't get so often, or ever (I'm not very sure) into the berserk
heating mode.

The lowest observed power consumption of the laptop is ~7W. It'd be very nice
if it'd be possible to shut the card down electrically via software and stay in
this 7W mode.

-- 
You are receiving this mail because:
You are the assignee for the bug.
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel