Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 7/13/23 11:09, Thomas Zimmermann wrote: > Am 13.07.23 um 10:53 schrieb Michel Dänzer: >> On 7/13/23 10:49, Thomas Zimmermann wrote: >>> Am 13.07.23 um 10:32 schrieb Michel Dänzer: On 7/12/23 17:25, Jocelyn Falempe wrote: > On 12/07/2023 17:05, Sui Jingfeng wrote: >> On 2023/7/10 16:07, Jocelyn Falempe wrote: >> >>> On the other hand, are there any drawback to present a BMC connector >>> even when the hardware doesn't have it ? >> >> If not properly setting up, I think you will create two encoder and two >> connector in the system. > > Yes, but I think it won't have any visible effect for the end-user. I'm afraid user-space display servers would waste effort producing content for a non-existing BMC (assuming its connector status is connected or unknown). >>> >>> Right now, the BMC output works because the VGA status is always connected. >>> So nothing really changes. >> >> User-space display servers would generally produce different contents by >> default for the VGA & BMC connectors. > > Can you elaborate? How would the output differ? Per the other sub-thread, I didn't realize there's only a single CRTC. -- Earthling Michel Dänzer| https://redhat.com Libre software enthusiast | Mesa and Xwayland developer
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Am 13.07.23 um 10:53 schrieb Michel Dänzer: On 7/13/23 10:49, Thomas Zimmermann wrote: Am 13.07.23 um 10:32 schrieb Michel Dänzer: On 7/12/23 17:25, Jocelyn Falempe wrote: On 12/07/2023 17:05, Sui Jingfeng wrote: On 2023/7/10 16:07, Jocelyn Falempe wrote: On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Yes, but I think it won't have any visible effect for the end-user. I'm afraid user-space display servers would waste effort producing content for a non-existing BMC (assuming its connector status is connected or unknown). Right now, the BMC output works because the VGA status is always connected. So nothing really changes. User-space display servers would generally produce different contents by default for the VGA & BMC connectors. Can you elaborate? How would the output differ? -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 7/13/23 10:53, Jocelyn Falempe wrote: > On 13/07/2023 10:32, Michel Dänzer wrote: >> On 7/12/23 17:25, Jocelyn Falempe wrote: >>> On 12/07/2023 17:05, Sui Jingfeng wrote: On 2023/7/10 16:07, Jocelyn Falempe wrote: > On the other hand, are there any drawback to present a BMC connector even > when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. >>> >>> Yes, but I think it won't have any visible effect for the end-user. >> >> I'm afraid user-space display servers would waste effort producing content >> for a non-existing BMC (assuming its connector status is connected or >> unknown). >> >> > I think it's already the case, as AST's DP and VGA connectors currently > always report "connected" status. And they all share the same crtc, so there > is only one framebuffer, that is always active. "Single CRTC" is the piece of information I was missing. Never mind then. -- Earthling Michel Dänzer| https://redhat.com Libre software enthusiast | Mesa and Xwayland developer
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 7/13/23 10:49, Thomas Zimmermann wrote: > Am 13.07.23 um 10:32 schrieb Michel Dänzer: >> On 7/12/23 17:25, Jocelyn Falempe wrote: >>> On 12/07/2023 17:05, Sui Jingfeng wrote: On 2023/7/10 16:07, Jocelyn Falempe wrote: > On the other hand, are there any drawback to present a BMC connector even > when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. >>> >>> Yes, but I think it won't have any visible effect for the end-user. >> >> I'm afraid user-space display servers would waste effort producing content >> for a non-existing BMC (assuming its connector status is connected or >> unknown). > > Right now, the BMC output works because the VGA status is always connected. > So nothing really changes. User-space display servers would generally produce different contents by default for the VGA & BMC connectors. -- Earthling Michel Dänzer| https://redhat.com Libre software enthusiast | Mesa and Xwayland developer
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 13/07/2023 10:32, Michel Dänzer wrote: On 7/12/23 17:25, Jocelyn Falempe wrote: On 12/07/2023 17:05, Sui Jingfeng wrote: On 2023/7/10 16:07, Jocelyn Falempe wrote: On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Yes, but I think it won't have any visible effect for the end-user. I'm afraid user-space display servers would waste effort producing content for a non-existing BMC (assuming its connector status is connected or unknown). I think it's already the case, as AST's DP and VGA connectors currently always report "connected" status. And they all share the same crtc, so there is only one framebuffer, that is always active. Best regards, -- Jocelyn
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Am 12.07.23 um 17:05 schrieb Sui Jingfeng: Hi, I'm here join to the discussion. Because I know a little about aspeed BMC. On 2023/7/10 16:07, Jocelyn Falempe wrote: On 07/07/2023 09:30, Thomas Zimmermann wrote: Hi Am 06.07.23 um 18:37 schrieb Jocelyn Falempe: [...] You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. Could work. That would be a connector and encoder of type 'virtual'? Not all ast devices have a BMC. Do you know how to detect its presence? Hum, I though all ast devices have a BMC, No, Thomas is right, not all ast devices have a BMC. I have two discrete AST BMC cards, see [1] for reference. I generally using the ast2400 BMC cards to testing patches and study drm/ast driver. It seems that this two cards are pure 2D display card, because they don't have a net interface(can not plug-in the net cable). [1] https://github.com/loongson-gfx/loongson_boards/blob/main/ast_bmc_cards/ast1400_and_ast2400.jpg Thanks for the info. Best regards Thomas and I don't see a way to detect that BMC is active or present. I think we better find one, then if the BMC is active (present). we could create a virtual encoder and connector safely. (It would be even better to know the browser's size, and automatically resize, like when using a VM. But I'm not sure the hardware/firmware is able to do this). I think it is not difficult, it just that need the firmware of your board to set a value to a register, (a scratch register) or something like that. But this really need you have the firmware (source code) to support this. Or you are luckily, if there somebody already done this for you. On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Best regards Thomas Best regards, -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Am 13.07.23 um 10:32 schrieb Michel Dänzer: On 7/12/23 17:25, Jocelyn Falempe wrote: On 12/07/2023 17:05, Sui Jingfeng wrote: On 2023/7/10 16:07, Jocelyn Falempe wrote: On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Yes, but I think it won't have any visible effect for the end-user. I'm afraid user-space display servers would waste effort producing content for a non-existing BMC (assuming its connector status is connected or unknown). Right now, the BMC output works because the VGA status is always connected. So nothing really changes. Best regards Thomas -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 7/12/23 17:25, Jocelyn Falempe wrote: > On 12/07/2023 17:05, Sui Jingfeng wrote: >> On 2023/7/10 16:07, Jocelyn Falempe wrote: >> >>> On the other hand, are there any drawback to present a BMC connector even >>> when the hardware doesn't have it ? >> >> If not properly setting up, I think you will create two encoder and two >> connector in the system. > > Yes, but I think it won't have any visible effect for the end-user. I'm afraid user-space display servers would waste effort producing content for a non-existing BMC (assuming its connector status is connected or unknown). -- Earthling Michel Dänzer| https://redhat.com Libre software enthusiast | Mesa and Xwayland developer
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 12/07/2023 17:05, Sui Jingfeng wrote: Hi, I'm here join to the discussion. Because I know a little about aspeed BMC. On 2023/7/10 16:07, Jocelyn Falempe wrote: On 07/07/2023 09:30, Thomas Zimmermann wrote: Hi Am 06.07.23 um 18:37 schrieb Jocelyn Falempe: [...] You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. Could work. That would be a connector and encoder of type 'virtual'? Not all ast devices have a BMC. Do you know how to detect its presence? Hum, I though all ast devices have a BMC, No, Thomas is right, not all ast devices have a BMC. I have two discrete AST BMC cards, see [1] for reference. I generally using the ast2400 BMC cards to testing patches and study drm/ast driver. It seems that this two cards are pure 2D display card, because they don't have a net interface(can not plug-in the net cable). [1] https://github.com/loongson-gfx/loongson_boards/blob/main/ast_bmc_cards/ast1400_and_ast2400.jpg Thanks for this picture, I didn't know about this discrete graphic cards, with PCIe connector. and I don't see a way to detect that BMC is active or present. I think we better find one, then if the BMC is active (present). we could create a virtual encoder and connector safely. (It would be even better to know the browser's size, and automatically resize, like when using a VM. But I'm not sure the hardware/firmware is able to do this). I think it is not difficult, it just that need the firmware of your board to set a value to a register, (a scratch register) or something like that. But this really need you have the firmware (source code) to support this. Yes, that's the difficult part. Or you are luckily, if there somebody already done this for you. On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Yes, but I think it won't have any visible effect for the end-user. -- Jocelyn Best regards Thomas Best regards,
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi, I'm here join to the discussion. Because I know a little about aspeed BMC. On 2023/7/10 16:07, Jocelyn Falempe wrote: On 07/07/2023 09:30, Thomas Zimmermann wrote: Hi Am 06.07.23 um 18:37 schrieb Jocelyn Falempe: [...] You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. Could work. That would be a connector and encoder of type 'virtual'? Not all ast devices have a BMC. Do you know how to detect its presence? Hum, I though all ast devices have a BMC, No, Thomas is right, not all ast devices have a BMC. I have two discrete AST BMC cards, see [1] for reference. I generally using the ast2400 BMC cards to testing patches and study drm/ast driver. It seems that this two cards are pure 2D display card, because they don't have a net interface(can not plug-in the net cable). [1] https://github.com/loongson-gfx/loongson_boards/blob/main/ast_bmc_cards/ast1400_and_ast2400.jpg and I don't see a way to detect that BMC is active or present. I think we better find one, then if the BMC is active (present). we could create a virtual encoder and connector safely. (It would be even better to know the browser's size, and automatically resize, like when using a VM. But I'm not sure the hardware/firmware is able to do this). I think it is not difficult, it just that need the firmware of your board to set a value to a register, (a scratch register) or something like that. But this really need you have the firmware (source code) to support this. Or you are luckily, if there somebody already done this for you. On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? If not properly setting up, I think you will create two encoder and two connector in the system. Best regards Thomas Best regards,
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 07/07/2023 09:30, Thomas Zimmermann wrote: Hi Am 06.07.23 um 18:37 schrieb Jocelyn Falempe: [...] You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. Could work. That would be a connector and encoder of type 'virtual'? Not all ast devices have a BMC. Do you know how to detect its presence? Hum, I though all ast devices have a BMC, and I don't see a way to detect that BMC is active or present. (It would be even better to know the browser's size, and automatically resize, like when using a VM. But I'm not sure the hardware/firmware is able to do this). On the other hand, are there any drawback to present a BMC connector even when the hardware doesn't have it ? Best regards Thomas Best regards, -- Jocelyn
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Am 06.07.23 um 18:37 schrieb Jocelyn Falempe: [...] You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. Could work. That would be a connector and encoder of type 'virtual'? Not all ast devices have a BMC. Do you know how to detect its presence? Best regards Thomas -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 06/07/2023 13:31, Jocelyn Falempe wrote: On 06/07/2023 12:26, Thomas Zimmermann wrote: Hi Am 06.07.23 um 11:16 schrieb Jocelyn Falempe: On 04/07/2023 18:45, Jocelyn Falempe wrote: On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. I've tested this approach, and it works. But on the server I'm testing, there are VGA and DP output. I think on a server that has only one DP output, if no monitor is connected, then no modes will be reported to userspace, and the remote BMC may not work ? You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. The result is that I get a black screen on the remote BMC. So maybe adding a remote/bmc connector will solve that. -- Jocelyn
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 06/07/2023 12:26, Thomas Zimmermann wrote: Hi Am 06.07.23 um 11:16 schrieb Jocelyn Falempe: On 04/07/2023 18:45, Jocelyn Falempe wrote: On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. I've tested this approach, and it works. But on the server I'm testing, there are VGA and DP output. I think on a server that has only one DP output, if no monitor is connected, then no modes will be reported to userspace, and the remote BMC may not work ? You could out-comment the VGA code in the ast driver for testing. Oh, Thanks for the idea, I will try that. -- Jocelyn Best regards Thomas Also I don't have physical access to the server, so I only tested when no monitor is plugged. I will send shortly a v2 with this change, so others can help me test this case. Best regards,
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Am 06.07.23 um 11:16 schrieb Jocelyn Falempe: On 04/07/2023 18:45, Jocelyn Falempe wrote: On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. I've tested this approach, and it works. But on the server I'm testing, there are VGA and DP output. I think on a server that has only one DP output, if no monitor is connected, then no modes will be reported to userspace, and the remote BMC may not work ? You could out-comment the VGA code in the ast driver for testing. Best regards Thomas Also I don't have physical access to the server, so I only tested when no monitor is plugged. I will send shortly a v2 with this change, so others can help me test this case. Best regards, -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On Thu, 06 Jul 2023, Jocelyn Falempe wrote: > Yes, so maybe a better way would be to add a remote/bmc connector, with > proper default resolution ? > That will better reflect what the hardware does. I'm afraid I don't know enough about the hardware or use case to say. BR, Jani. -- Jani Nikula, Intel Open Source Graphics Center
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 06/07/2023 11:32, Jani Nikula wrote: On Thu, 06 Jul 2023, Jocelyn Falempe wrote: On 04/07/2023 18:45, Jocelyn Falempe wrote: On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. I've tested this approach, and it works. \o/ But on the server I'm testing, there are VGA and DP output. I think on a server that has only one DP output, if no monitor is connected, then no modes will be reported to userspace, and the remote BMC may not work ? I couldn't say, but having the driver lie about the connected status to make it work feels wrong. Yes, so maybe a better way would be to add a remote/bmc connector, with proper default resolution ? That will better reflect what the hardware does. -- Jocelyn Also I don't have physical access to the server, so I only tested when no monitor is plugged. I will send shortly a v2 with this change, so others can help me test this case. Thanks, Jani. Best regards,
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On Thu, 06 Jul 2023, Jocelyn Falempe wrote: > On 04/07/2023 18:45, Jocelyn Falempe wrote: >> On 04/07/2023 16:54, Jani Nikula wrote: >>> On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. >>> >>> This conflates "monitor connected" and "EDID present", which are not >>> necessarily the same thing. >>> >>> The fallback in drm_helper_probe_single_connector_modes() is for no >>> modes, but connector status is connected or unknown. >> >> When debugging the issue, I found it surprising that the status is >> "connected" when nothing is plugged in the DP port. >>> >>> You could add a connector ->detect callback that returns disconnected >>> when there's no display, and the problem should go away. If there's no >>> ->detect callback, it'll default to connected. >> >> ok, I'll try that. I don't know how the hardware detect something is >> connected, but looking at the dp code, maybe checking >> "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. > > I've tested this approach, and it works. \o/ > But on the server I'm testing, > there are VGA and DP output. I think on a server that has only one DP > output, if no monitor is connected, then no modes will be reported to > userspace, and the remote BMC may not work ? I couldn't say, but having the driver lie about the connected status to make it work feels wrong. > Also I don't have physical access to the server, so I only tested when > no monitor is plugged. > > I will send shortly a v2 with this change, so others can help me test > this case. Thanks, Jani. > > Best regards, -- Jani Nikula, Intel Open Source Graphics Center
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 04/07/2023 18:45, Jocelyn Falempe wrote: On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. I've tested this approach, and it works. But on the server I'm testing, there are VGA and DP output. I think on a server that has only one DP output, if no monitor is connected, then no modes will be reported to userspace, and the remote BMC may not work ? Also I don't have physical access to the server, so I only tested when no monitor is plugged. I will send shortly a v2 with this change, so others can help me test this case. Best regards, -- Jocelyn Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe --- drivers/gpu/drm/ast/ast_mode.c | 26 -- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 36374828f6c8..8f7b7cc021c7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs .get_modes = ast_dp501_connector_helper_get_modes, }; +static int ast_dp_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + struct drm_display_mode *mode; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + /* + * When no monitor are detected, DP now default to 640x480 + * As aspeed is mostly used in remote server, and DP monitors are + * rarely attached, it's better to default to 1024x768 + */ + if (!connector->edid_blob_ptr) { Please try not to use connector->edid_blob_ptr for anything in drivers. The logic is complicated enough as it is, with the firmware and override EDIDs and everything, and makes future refactoring of EDID handling harder. Ok, I will try your other suggestion, and remove this. Thanks a lot for your comments.
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On 04/07/2023 16:54, Jani Nikula wrote: On Fri, 23 Jun 2023, Jocelyn Falempe wrote: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. When debugging the issue, I found it surprising that the status is "connected" when nothing is plugged in the DP port. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. ok, I'll try that. I don't know how the hardware detect something is connected, but looking at the dp code, maybe checking "AST_IO_CRTC_PORT,0xDC, ASTDP_LINK_SUCCESS" would be good enough. Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe --- drivers/gpu/drm/ast/ast_mode.c | 26 -- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 36374828f6c8..8f7b7cc021c7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs .get_modes = ast_dp501_connector_helper_get_modes, }; +static int ast_dp_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + struct drm_display_mode *mode; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + /* +* When no monitor are detected, DP now default to 640x480 +* As aspeed is mostly used in remote server, and DP monitors are +* rarely attached, it's better to default to 1024x768 +*/ + if (!connector->edid_blob_ptr) { Please try not to use connector->edid_blob_ptr for anything in drivers. The logic is complicated enough as it is, with the firmware and override EDIDs and everything, and makes future refactoring of EDID handling harder. Ok, I will try your other suggestion, and remove this. Thanks a lot for your comments. -- Jocelyn BR, Jani. + list_for_each_entry(mode, &connector->modes, head) { + if (mode->hdisplay == 1024 && mode->vdisplay == 768) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_sort(&connector->modes); + } + } + return ret; +} + static const struct drm_connector_funcs ast_dp501_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, @@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs static const struct drm_connector_funcs ast_astdp_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, base-commit: 0adec22702d497385dbdc52abb165f379a00efba
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
On Fri, 23 Jun 2023, Jocelyn Falempe wrote: > Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no > EDID on DP") > The default resolution is now 640x480 when no monitor is connected. > But Aspeed graphics is mostly used in servers, where no monitor > is attached. This also affects the "remote" resolution to 640x480, which is > inconvenient, and breaks the anaconda installer. > So when no EDID is present, set 1024x768 as preferred resolution. This conflates "monitor connected" and "EDID present", which are not necessarily the same thing. The fallback in drm_helper_probe_single_connector_modes() is for no modes, but connector status is connected or unknown. You could add a connector ->detect callback that returns disconnected when there's no display, and the problem should go away. If there's no ->detect callback, it'll default to connected. > Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") > Signed-off-by: Jocelyn Falempe > --- > drivers/gpu/drm/ast/ast_mode.c | 26 -- > 1 file changed, 24 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c > index 36374828f6c8..8f7b7cc021c7 100644 > --- a/drivers/gpu/drm/ast/ast_mode.c > +++ b/drivers/gpu/drm/ast/ast_mode.c > @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs > ast_dp501_connector_helper_funcs > .get_modes = ast_dp501_connector_helper_get_modes, > }; > > +static int ast_dp_probe_single_connector_modes(struct drm_connector > *connector, > +uint32_t maxX, uint32_t maxY) > +{ > + int ret; > + struct drm_display_mode *mode; > + > + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); > + /* > + * When no monitor are detected, DP now default to 640x480 > + * As aspeed is mostly used in remote server, and DP monitors are > + * rarely attached, it's better to default to 1024x768 > + */ > + if (!connector->edid_blob_ptr) { Please try not to use connector->edid_blob_ptr for anything in drivers. The logic is complicated enough as it is, with the firmware and override EDIDs and everything, and makes future refactoring of EDID handling harder. BR, Jani. > + list_for_each_entry(mode, &connector->modes, head) { > + if (mode->hdisplay == 1024 && mode->vdisplay == 768) > + mode->type |= DRM_MODE_TYPE_PREFERRED; > + drm_mode_sort(&connector->modes); > + } > + } > + return ret; > +} > + > static const struct drm_connector_funcs ast_dp501_connector_funcs = { > .reset = drm_atomic_helper_connector_reset, > - .fill_modes = drm_helper_probe_single_connector_modes, > + .fill_modes = ast_dp_probe_single_connector_modes, > .destroy = drm_connector_cleanup, > .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > @@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs > ast_astdp_connector_helper_funcs > > static const struct drm_connector_funcs ast_astdp_connector_funcs = { > .reset = drm_atomic_helper_connector_reset, > - .fill_modes = drm_helper_probe_single_connector_modes, > + .fill_modes = ast_dp_probe_single_connector_modes, > .destroy = drm_connector_cleanup, > .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > base-commit: 0adec22702d497385dbdc52abb165f379a00efba -- Jani Nikula, Intel Open Source Graphics Center
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
(cc: some people from commit fae7d186403e) Am 04.07.23 um 16:19 schrieb Thomas Zimmermann: Hi Jocelyn Am 23.06.23 um 11:46 schrieb Jocelyn Falempe: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. By "remote resolution", you mean the display mode that the BMC uses? So when no EDID is present, set 1024x768 as preferred resolution. Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") This commit says that 640x480 is the designated failsafe mode if no EDID is available. Therefore, I think we should not override it unconditionally. The ast driver is no special in that case. But I see why you're doing this change. I think any solution should be implemented in drm_helper_probe_single_connector_modes(). But before we solve this in the kernel, is it possible to delegate this to userspace? If no EDID has been given, userspace could try a non-failsafe display mode. Best regards Thomas Signed-off-by: Jocelyn Falempe --- drivers/gpu/drm/ast/ast_mode.c | 26 -- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 36374828f6c8..8f7b7cc021c7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs .get_modes = ast_dp501_connector_helper_get_modes, }; +static int ast_dp_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + struct drm_display_mode *mode; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + /* + * When no monitor are detected, DP now default to 640x480 + * As aspeed is mostly used in remote server, and DP monitors are + * rarely attached, it's better to default to 1024x768 + */ + if (!connector->edid_blob_ptr) { + list_for_each_entry(mode, &connector->modes, head) { + if (mode->hdisplay == 1024 && mode->vdisplay == 768) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_sort(&connector->modes); + } + } + return ret; +} + static const struct drm_connector_funcs ast_dp501_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, @@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs static const struct drm_connector_funcs ast_astdp_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, base-commit: 0adec22702d497385dbdc52abb165f379a00efba -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
Re: [PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Hi Jocelyn Am 23.06.23 um 11:46 schrieb Jocelyn Falempe: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. By "remote resolution", you mean the display mode that the BMC uses? So when no EDID is present, set 1024x768 as preferred resolution. Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") This commit says that 640x480 is the designated failsafe mode if no EDID is available. Therefore, I think we should not override it unconditionally. The ast driver is no special in that case. But I see why you're doing this change. I think any solution should be implemented in drm_helper_probe_single_connector_modes(). But before we solve this in the kernel, is it possible to delegate this to userspace? If no EDID has been given, userspace could try a non-failsafe display mode. Best regards Thomas Signed-off-by: Jocelyn Falempe --- drivers/gpu/drm/ast/ast_mode.c | 26 -- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 36374828f6c8..8f7b7cc021c7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs .get_modes = ast_dp501_connector_helper_get_modes, }; +static int ast_dp_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + struct drm_display_mode *mode; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + /* +* When no monitor are detected, DP now default to 640x480 +* As aspeed is mostly used in remote server, and DP monitors are +* rarely attached, it's better to default to 1024x768 +*/ + if (!connector->edid_blob_ptr) { + list_for_each_entry(mode, &connector->modes, head) { + if (mode->hdisplay == 1024 && mode->vdisplay == 768) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_sort(&connector->modes); + } + } + return ret; +} + static const struct drm_connector_funcs ast_dp501_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, @@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs static const struct drm_connector_funcs ast_astdp_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, base-commit: 0adec22702d497385dbdc52abb165f379a00efba -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) OpenPGP_signature Description: OpenPGP digital signature
[PATCH] drm/ast: Fix default resolution when no monitor is connected on DP
Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the "remote" resolution to 640x480, which is inconvenient, and breaks the anaconda installer. So when no EDID is present, set 1024x768 as preferred resolution. Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe --- drivers/gpu/drm/ast/ast_mode.c | 26 -- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 36374828f6c8..8f7b7cc021c7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1589,9 +1589,31 @@ static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs .get_modes = ast_dp501_connector_helper_get_modes, }; +static int ast_dp_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + struct drm_display_mode *mode; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + /* +* When no monitor are detected, DP now default to 640x480 +* As aspeed is mostly used in remote server, and DP monitors are +* rarely attached, it's better to default to 1024x768 +*/ + if (!connector->edid_blob_ptr) { + list_for_each_entry(mode, &connector->modes, head) { + if (mode->hdisplay == 1024 && mode->vdisplay == 768) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_sort(&connector->modes); + } + } + return ret; +} + static const struct drm_connector_funcs ast_dp501_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, @@ -1678,7 +1700,7 @@ static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs static const struct drm_connector_funcs ast_astdp_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = ast_dp_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, base-commit: 0adec22702d497385dbdc52abb165f379a00efba -- 2.40.1