Re: [PATCH 1/3] drm: panel: simple: Allow timing constraints, not fixed delays
On Tue, Oct 27, 2020 at 08:23:18PM +0100, Daniel Vetter wrote:
> On Tue, Oct 27, 2020 at 06:14:59PM +0100, Thierry Reding wrote:
> > On Tue, Oct 27, 2020 at 09:45:54AM -0700, Douglas Anderson wrote:
> > > The simple panel code currently allows panels to define fixed delays
> > > at certain stages of initialization. These work OK, but they don't
> > > really map all that clearly to the requirements presented in many
> > > panel datasheets. Instead of defining a fixed delay, those datasheets
> > > provide a timing diagram and specify a minimum amount of time that
> > > needs to pass from event A to event B.
> > >
> > > Because of the way things are currently defined, most panels end up
> > > over-delaying. One prime example here is that a number of panels I've
> > > looked at define the amount of time that must pass between turning a
> > > panel off and turning it back on again. Since there is no way to
> > > specify this, many developers have listed this as the "unprepare"
> > > delay. However, if nobody ever tried to turn the panel on again in
> > > the next 500 ms (or whatever the delay was) then this delay was
> > > pointless. It's better to do the delay only in the case that someone
> > > tried to turn the panel on too quickly.
> > >
> > > Let's support specifying delays as constraints. We'll start with the
> > > one above and also a second one: the minimum time between prepare
> > > being done and doing the enable. On the panel I'm looking at, there's
> > > an 80 ms minimum time between HPD being asserted by the panel and
> > > setting the backlight enable GPIO. By specifying as a constraint we
> > > can enforce this without over-delaying. Specifically the link
> > > training is allowed to happen in parallel with this delay so adding a
> > > fixed 80 ms delay isn't ideal.
> > >
> > > Signed-off-by: Douglas Anderson
> > > ---
> > >
> > > drivers/gpu/drm/panel/panel-simple.c | 51
> > > 1 file changed, 44 insertions(+), 7 deletions(-)
> >
> > This has always been bugging me a bit about the current setup, so I very
> > much like this idea.
> >
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > > b/drivers/gpu/drm/panel/panel-simple.c
> > > index 2be358fb46f7..cbbe71a2a940 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -92,6 +92,19 @@ struct panel_desc {
> > > unsigned int unprepare;
> > > } delay;
> > >
> > > + /**
> > > + * @prepare_to_enable_ms: If this many milliseconds hasn't passed after
> > > + *prepare finished, add a delay to the start
> > > + *of enable.
> > > + * @unprepare_to_prepare_ms: If this many milliseconds hasn't passed
> > > + * unprepare finished, add a delay to the
> > > + * start of prepare.
> >
> > I find this very difficult to understand and it's also not clear from
> > this what exactly the delay is. Perhaps this can be somewhat clarified
> > Something like the below perhaps?
> >
> > @prepare_to_enable_ms: The minimum time, in milliseconds, that
> > needs to have passed between when prepare finished and enable
> > may begin. If at enable time less time has passed since
> > prepare finished, the driver waits for the remaining time.
>
> Also maybe split the kerneldoc into the sub-structure (this should work I
> think), so that you can go really wild on formatting :-)
I have a patch somewhere where I inlined all the comments and polished
them a bit. Will try to dig it up in the weekend.
It was motivated by a small W=1 detour.
Sam
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/3] drm: panel: simple: Allow timing constraints, not fixed delays
On Tue, Oct 27, 2020 at 06:14:59PM +0100, Thierry Reding wrote:
> On Tue, Oct 27, 2020 at 09:45:54AM -0700, Douglas Anderson wrote:
> > The simple panel code currently allows panels to define fixed delays
> > at certain stages of initialization. These work OK, but they don't
> > really map all that clearly to the requirements presented in many
> > panel datasheets. Instead of defining a fixed delay, those datasheets
> > provide a timing diagram and specify a minimum amount of time that
> > needs to pass from event A to event B.
> >
> > Because of the way things are currently defined, most panels end up
> > over-delaying. One prime example here is that a number of panels I've
> > looked at define the amount of time that must pass between turning a
> > panel off and turning it back on again. Since there is no way to
> > specify this, many developers have listed this as the "unprepare"
> > delay. However, if nobody ever tried to turn the panel on again in
> > the next 500 ms (or whatever the delay was) then this delay was
> > pointless. It's better to do the delay only in the case that someone
> > tried to turn the panel on too quickly.
> >
> > Let's support specifying delays as constraints. We'll start with the
> > one above and also a second one: the minimum time between prepare
> > being done and doing the enable. On the panel I'm looking at, there's
> > an 80 ms minimum time between HPD being asserted by the panel and
> > setting the backlight enable GPIO. By specifying as a constraint we
> > can enforce this without over-delaying. Specifically the link
> > training is allowed to happen in parallel with this delay so adding a
> > fixed 80 ms delay isn't ideal.
> >
> > Signed-off-by: Douglas Anderson
> > ---
> >
> > drivers/gpu/drm/panel/panel-simple.c | 51
> > 1 file changed, 44 insertions(+), 7 deletions(-)
>
> This has always been bugging me a bit about the current setup, so I very
> much like this idea.
>
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 2be358fb46f7..cbbe71a2a940 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -92,6 +92,19 @@ struct panel_desc {
> > unsigned int unprepare;
> > } delay;
> >
> > + /**
> > +* @prepare_to_enable_ms: If this many milliseconds hasn't passed after
> > +*prepare finished, add a delay to the start
> > +*of enable.
> > +* @unprepare_to_prepare_ms: If this many milliseconds hasn't passed
> > +* unprepare finished, add a delay to the
> > +* start of prepare.
>
> I find this very difficult to understand and it's also not clear from
> this what exactly the delay is. Perhaps this can be somewhat clarified
> Something like the below perhaps?
>
> @prepare_to_enable_ms: The minimum time, in milliseconds, that
> needs to have passed between when prepare finished and enable
> may begin. If at enable time less time has passed since
> prepare finished, the driver waits for the remaining time.
Also maybe split the kerneldoc into the sub-structure (this should work I
think), so that you can go really wild on formatting :-)
You could even include diagrams or at least ascii art and stuff ...
-Daniel
>
> > +*/
> > + struct {
> > + unsigned int prepare_to_enable_ms;
> > + unsigned int unprepare_to_prepare_ms;
> > + } timing_constraints;
> > +
> > u32 bus_format;
> > u32 bus_flags;
> > int connector_type;
> > @@ -99,10 +112,12 @@ struct panel_desc {
> >
> > struct panel_simple {
> > struct drm_panel base;
> > - bool prepared;
>
> I understand how you're trying to reuse the value of prepared_time to
> replace this flag, but I find the logic very hard to understand now.
>
> > bool enabled;
> > bool no_hpd;
> >
> > + ktime_t prepared_time;
> > + ktime_t unprepared_time;
> > +
> > const struct panel_desc *desc;
> >
> > struct regulator *supply;
> > @@ -230,6 +245,21 @@ static int panel_simple_get_non_edid_modes(struct
> > panel_simple *panel,
> > return num;
> > }
> >
> > +static void panel_simple_enforce_constraint(ktime_t start_ktime,
> > + unsigned int min_ms)
> > +{
> > + ktime_t now_ktime, min_ktime;
> > +
> > + if (!min_ms)
> > + return;
> > +
> > + min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
> > + now_ktime = ktime_get();
> > +
> > + if (ktime_before(now_ktime, min_ktime))
> > + msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
> > +}
> > +
> > static int panel_simple_disable(struct drm_panel *panel)
> > {
> > struct panel_simple *p = to_panel_simple(panel);
> > @@ -249,18 +279,19 @@ static int panel_simple_unprepare(struct drm_panel
> > *panel)
> >
Re: [PATCH 1/3] drm: panel: simple: Allow timing constraints, not fixed delays
On Tue, Oct 27, 2020 at 09:45:54AM -0700, Douglas Anderson wrote:
> The simple panel code currently allows panels to define fixed delays
> at certain stages of initialization. These work OK, but they don't
> really map all that clearly to the requirements presented in many
> panel datasheets. Instead of defining a fixed delay, those datasheets
> provide a timing diagram and specify a minimum amount of time that
> needs to pass from event A to event B.
>
> Because of the way things are currently defined, most panels end up
> over-delaying. One prime example here is that a number of panels I've
> looked at define the amount of time that must pass between turning a
> panel off and turning it back on again. Since there is no way to
> specify this, many developers have listed this as the "unprepare"
> delay. However, if nobody ever tried to turn the panel on again in
> the next 500 ms (or whatever the delay was) then this delay was
> pointless. It's better to do the delay only in the case that someone
> tried to turn the panel on too quickly.
>
> Let's support specifying delays as constraints. We'll start with the
> one above and also a second one: the minimum time between prepare
> being done and doing the enable. On the panel I'm looking at, there's
> an 80 ms minimum time between HPD being asserted by the panel and
> setting the backlight enable GPIO. By specifying as a constraint we
> can enforce this without over-delaying. Specifically the link
> training is allowed to happen in parallel with this delay so adding a
> fixed 80 ms delay isn't ideal.
>
> Signed-off-by: Douglas Anderson
> ---
>
> drivers/gpu/drm/panel/panel-simple.c | 51
> 1 file changed, 44 insertions(+), 7 deletions(-)
This has always been bugging me a bit about the current setup, so I very
much like this idea.
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 2be358fb46f7..cbbe71a2a940 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -92,6 +92,19 @@ struct panel_desc {
> unsigned int unprepare;
> } delay;
>
> + /**
> + * @prepare_to_enable_ms: If this many milliseconds hasn't passed after
> + *prepare finished, add a delay to the start
> + *of enable.
> + * @unprepare_to_prepare_ms: If this many milliseconds hasn't passed
> + * unprepare finished, add a delay to the
> + * start of prepare.
I find this very difficult to understand and it's also not clear from
this what exactly the delay is. Perhaps this can be somewhat clarified
Something like the below perhaps?
@prepare_to_enable_ms: The minimum time, in milliseconds, that
needs to have passed between when prepare finished and enable
may begin. If at enable time less time has passed since
prepare finished, the driver waits for the remaining time.
> + */
> + struct {
> + unsigned int prepare_to_enable_ms;
> + unsigned int unprepare_to_prepare_ms;
> + } timing_constraints;
> +
> u32 bus_format;
> u32 bus_flags;
> int connector_type;
> @@ -99,10 +112,12 @@ struct panel_desc {
>
> struct panel_simple {
> struct drm_panel base;
> - bool prepared;
I understand how you're trying to reuse the value of prepared_time to
replace this flag, but I find the logic very hard to understand now.
> bool enabled;
> bool no_hpd;
>
> + ktime_t prepared_time;
> + ktime_t unprepared_time;
> +
> const struct panel_desc *desc;
>
> struct regulator *supply;
> @@ -230,6 +245,21 @@ static int panel_simple_get_non_edid_modes(struct
> panel_simple *panel,
> return num;
> }
>
> +static void panel_simple_enforce_constraint(ktime_t start_ktime,
> + unsigned int min_ms)
> +{
> + ktime_t now_ktime, min_ktime;
> +
> + if (!min_ms)
> + return;
> +
> + min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
> + now_ktime = ktime_get();
> +
> + if (ktime_before(now_ktime, min_ktime))
> + msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
> +}
> +
> static int panel_simple_disable(struct drm_panel *panel)
> {
> struct panel_simple *p = to_panel_simple(panel);
> @@ -249,18 +279,19 @@ static int panel_simple_unprepare(struct drm_panel
> *panel)
> {
> struct panel_simple *p = to_panel_simple(panel);
>
> - if (!p->prepared)
> + if (!p->prepared_time)
> return 0;
Here for example I now need to actively think about what exactly
!prepared_time actually means, when all it really means is that we're
checking if the panel has already been enabled.
Perhaps we could provide a tiny helper to make this clearer?
static inline bool
[PATCH 1/3] drm: panel: simple: Allow timing constraints, not fixed delays
The simple panel code currently allows panels to define fixed delays
at certain stages of initialization. These work OK, but they don't
really map all that clearly to the requirements presented in many
panel datasheets. Instead of defining a fixed delay, those datasheets
provide a timing diagram and specify a minimum amount of time that
needs to pass from event A to event B.
Because of the way things are currently defined, most panels end up
over-delaying. One prime example here is that a number of panels I've
looked at define the amount of time that must pass between turning a
panel off and turning it back on again. Since there is no way to
specify this, many developers have listed this as the "unprepare"
delay. However, if nobody ever tried to turn the panel on again in
the next 500 ms (or whatever the delay was) then this delay was
pointless. It's better to do the delay only in the case that someone
tried to turn the panel on too quickly.
Let's support specifying delays as constraints. We'll start with the
one above and also a second one: the minimum time between prepare
being done and doing the enable. On the panel I'm looking at, there's
an 80 ms minimum time between HPD being asserted by the panel and
setting the backlight enable GPIO. By specifying as a constraint we
can enforce this without over-delaying. Specifically the link
training is allowed to happen in parallel with this delay so adding a
fixed 80 ms delay isn't ideal.
Signed-off-by: Douglas Anderson
---
drivers/gpu/drm/panel/panel-simple.c | 51
1 file changed, 44 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 2be358fb46f7..cbbe71a2a940 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -92,6 +92,19 @@ struct panel_desc {
unsigned int unprepare;
} delay;
+ /**
+* @prepare_to_enable_ms: If this many milliseconds hasn't passed after
+*prepare finished, add a delay to the start
+*of enable.
+* @unprepare_to_prepare_ms: If this many milliseconds hasn't passed
+* unprepare finished, add a delay to the
+* start of prepare.
+*/
+ struct {
+ unsigned int prepare_to_enable_ms;
+ unsigned int unprepare_to_prepare_ms;
+ } timing_constraints;
+
u32 bus_format;
u32 bus_flags;
int connector_type;
@@ -99,10 +112,12 @@ struct panel_desc {
struct panel_simple {
struct drm_panel base;
- bool prepared;
bool enabled;
bool no_hpd;
+ ktime_t prepared_time;
+ ktime_t unprepared_time;
+
const struct panel_desc *desc;
struct regulator *supply;
@@ -230,6 +245,21 @@ static int panel_simple_get_non_edid_modes(struct
panel_simple *panel,
return num;
}
+static void panel_simple_enforce_constraint(ktime_t start_ktime,
+ unsigned int min_ms)
+{
+ ktime_t now_ktime, min_ktime;
+
+ if (!min_ms)
+ return;
+
+ min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
+ now_ktime = ktime_get();
+
+ if (ktime_before(now_ktime, min_ktime))
+ msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
+}
+
static int panel_simple_disable(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
@@ -249,18 +279,19 @@ static int panel_simple_unprepare(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
- if (!p->prepared)
+ if (!p->prepared_time)
return 0;
gpiod_set_value_cansleep(p->enable_gpio, 0);
regulator_disable(p->supply);
+ p->prepared_time = 0;
+ p->unprepared_time = ktime_get();
+
if (p->desc->delay.unprepare)
msleep(p->desc->delay.unprepare);
- p->prepared = false;
-
return 0;
}
@@ -296,9 +327,12 @@ static int panel_simple_prepare(struct drm_panel *panel)
int err;
int hpd_asserted;
- if (p->prepared)
+ if (p->prepared_time)
return 0;
+ panel_simple_enforce_constraint(p->unprepared_time,
+
p->desc->timing_constraints.unprepare_to_prepare_ms);
+
err = regulator_enable(p->supply);
if (err < 0) {
dev_err(panel->dev, "failed to enable supply: %d\n", err);
@@ -333,7 +367,7 @@ static int panel_simple_prepare(struct drm_panel *panel)
}
}
- p->prepared = true;
+ p->prepared_time = ktime_get();
return 0;
}
@@ -348,6 +382,9 @@ static int panel_simple_enable(struct drm_panel *panel)
if (p->desc->delay.enable)
