Re: [PATCH v10 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding
Hello Hoegeun, On 02/21/2017 10:09 PM, Hoegeun Kwon wrote: > The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected > using MIPI-DSI interfaces. > > Signed-off-by: Donghwa Lee> Signed-off-by: Hyungwon Hwang > Signed-off-by: Hoegeun Kwon > Reviewed-by: Andrzej Hajda > Acked-by: Rob Herring > --- Reviewed-by: Javier Martinez Canillas Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v10 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by: Donghwa LeeSigned-off-by: Hyungwon Hwang Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Acked-by: Rob Herring --- .../bindings/display/panel/samsung,s6e3ha2.txt | 28 ++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt new file mode 100644 index 000..18854f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt @@ -0,0 +1,28 @@ +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + +Required properties: + - compatible: "samsung,s6e3ha2" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - enable-gpios: a GPIO spec for the panel enable pin (active high) + +Optional properties: + - te-gpios: a GPIO spec for the tearing effect synchronization signal +gpio pin (active high) + +Example: + { + ... + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <_reg>; + vci-supply = <_reg>; + reset-gpios = < 0 GPIO_ACTIVE_LOW>; + enable-gpios = < 5 GPIO_ACTIVE_HIGH>; + te-gpios = < 3 GPIO_ACTIVE_HIGH>; + }; +}; -- 1.9.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v10 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by: Donghwa LeeSigned-off-by: Hyungwon Hwang Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Acked-by: Rob Herring --- .../bindings/display/panel/samsung,s6e3ha2.txt | 28 ++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt new file mode 100644 index 000..18854f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt @@ -0,0 +1,28 @@ +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + +Required properties: + - compatible: "samsung,s6e3ha2" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - enable-gpios: a GPIO spec for the panel enable pin (active high) + +Optional properties: + - te-gpios: a GPIO spec for the tearing effect synchronization signal +gpio pin (active high) + +Example: + { + ... + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <_reg>; + vci-supply = <_reg>; + reset-gpios = < 0 GPIO_ACTIVE_LOW>; + enable-gpios = < 5 GPIO_ACTIVE_HIGH>; + te-gpios = < 3 GPIO_ACTIVE_HIGH>; + }; +}; -- 1.9.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel