RE: [EXT] Re: [PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ
Hi Alexander, Thanks your comments, > -Original Message- > From: Alexander Stein > Sent: 2024年1月17日 17:47 > To: dmitry.barysh...@linaro.org; andrzej.ha...@intel.com; > neil.armstr...@linaro.org; Laurent Pinchart > ; jo...@kwiboo.se; > jernej.skra...@gmail.com; airl...@gmail.com; dan...@ffwll.ch; > robh...@kernel.org; krzysztof.kozlowski...@linaro.org; > shawn...@kernel.org; s.ha...@pengutronix.de; feste...@gmail.com; > vk...@kernel.org; dri-devel@lists.freedesktop.org; > devicet...@vger.kernel.org; linux-arm-ker...@lists.infradead.org; > linux-ker...@vger.kernel.org; linux-...@lists.infradead.org; Sandor Yu > > Cc: ker...@pengutronix.de; dl-linux-imx ; Sandor Yu > ; Oliver Brown ; > s...@ravnborg.org > Subject: [EXT] Re: [PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for > i.MX8MQ > > Caution: This is an external email. Please take care when clicking links or > opening attachments. When in doubt, report the message using the 'Report > this email' button > > > Hi Sandor, > > thanks for the update. > > Am Mittwoch, 10. Januar 2024, 02:08:48 CET schrieb Sandor Yu: > > Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ. > > > > Cadence HDP-TX PHY could be put in either DP mode or HDMI mode base > on > > the configuration chosen. > > HDMI PHY mode is configurated in the driver. > > > > Signed-off-by: Sandor Yu > > Tested-by: Alexander Stein > > --- > > v11->v12: > > - Adjust clk disable order. > > - Return error code to replace -1 for function wait_for_ack(). > > - Use bool for variable pclk_in. > > - Add year 2024 to copyright. > > > > drivers/phy/freescale/Kconfig | 10 + > > drivers/phy/freescale/Makefile | 1 + > > drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 959 > > > > 3 files changed, 970 insertions(+) > > create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > > > > diff --git a/drivers/phy/freescale/Kconfig > > b/drivers/phy/freescale/Kconfig index c39709fd700ac..14f47b7cc77ab > > 100644 > > --- a/drivers/phy/freescale/Kconfig > > +++ b/drivers/phy/freescale/Kconfig > > @@ -45,6 +45,16 @@ config PHY_FSL_IMX8MQ_DP > > Enable this to support the Cadence HDPTX DP PHY driver > > on i.MX8MQ SOC. > > > > +config PHY_FSL_IMX8MQ_HDMI > > + tristate "Freescale i.MX8MQ HDMI PHY support" > > + depends on OF && HAS_IOMEM > > + depends on COMMON_CLK > > + select GENERIC_PHY > > + select CDNS_MHDP_HELPER > > + help > > + Enable this to support the Cadence HDPTX HDMI PHY driver > > + on i.MX8MQ SOC. > > + > > endif > > > > config PHY_FSL_LYNX_28G > > diff --git a/drivers/phy/freescale/Makefile > > b/drivers/phy/freescale/Makefile index 47e5285209fa8..1380ac31c2ead > > 100644 > > --- a/drivers/phy/freescale/Makefile > > +++ b/drivers/phy/freescale/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0-only > > obj-$(CONFIG_PHY_FSL_IMX8MQ_DP) += > phy-fsl-imx8mq-dp.o > > +obj-$(CONFIG_PHY_FSL_IMX8MQ_HDMI)+= phy-fsl-imx8mq-hdmi.o > > obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o > > obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o > > obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)+= phy-fsl-imx8-mipi-dphy.o > > diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > > b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c new file mode 100644 > > index 0..9e03c726f290c > > --- /dev/null > > +++ b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > > @@ -0,0 +1,959 @@ > > [snip] > > +int cdns_hdptx_hdmi_phy_valid(struct phy *phy, enum phy_mode mode, > > +int > > submode, + union phy_configure_opts > *opts) > > This function can be made static. > OK, thanks! B.R Sandor > Thanks and best regards, > Alexander > > > +{ > > + u32 rate = opts->hdmi.pixel_clk_rate; > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(pixel_clk_output_ctrl_table); i++) > > + if (rate == > pixel_clk_output_ctrl_table[i].pixel_clk_freq_min) > > + return 0; > > + > > + return -EINVAL; > > +} > > + > > +static int cdns_hdptx_hdmi_phy_init(struct phy *phy) { > > + return 0; > > +} > > + > > +static int cdns_hdptx_hdmi_configure(struct phy *phy, > > + union phy_configure_opts *opts) > { > > + struct cdns_hdp
Re: [PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ
Hi Sandor, thanks for the update. Am Mittwoch, 10. Januar 2024, 02:08:48 CET schrieb Sandor Yu: > Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ. > > Cadence HDP-TX PHY could be put in either DP mode or > HDMI mode base on the configuration chosen. > HDMI PHY mode is configurated in the driver. > > Signed-off-by: Sandor Yu > Tested-by: Alexander Stein > --- > v11->v12: > - Adjust clk disable order. > - Return error code to replace -1 for function wait_for_ack(). > - Use bool for variable pclk_in. > - Add year 2024 to copyright. > > drivers/phy/freescale/Kconfig | 10 + > drivers/phy/freescale/Makefile | 1 + > drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 959 > 3 files changed, 970 insertions(+) > create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > > diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig > index c39709fd700ac..14f47b7cc77ab 100644 > --- a/drivers/phy/freescale/Kconfig > +++ b/drivers/phy/freescale/Kconfig > @@ -45,6 +45,16 @@ config PHY_FSL_IMX8MQ_DP > Enable this to support the Cadence HDPTX DP PHY driver > on i.MX8MQ SOC. > > +config PHY_FSL_IMX8MQ_HDMI > + tristate "Freescale i.MX8MQ HDMI PHY support" > + depends on OF && HAS_IOMEM > + depends on COMMON_CLK > + select GENERIC_PHY > + select CDNS_MHDP_HELPER > + help > + Enable this to support the Cadence HDPTX HDMI PHY driver > + on i.MX8MQ SOC. > + > endif > > config PHY_FSL_LYNX_28G > diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile > index 47e5285209fa8..1380ac31c2ead 100644 > --- a/drivers/phy/freescale/Makefile > +++ b/drivers/phy/freescale/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0-only > obj-$(CONFIG_PHY_FSL_IMX8MQ_DP) += phy-fsl-imx8mq-dp.o > +obj-$(CONFIG_PHY_FSL_IMX8MQ_HDMI)+= phy-fsl-imx8mq-hdmi.o > obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o > obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o > obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)+= phy-fsl-imx8-mipi-dphy.o > diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c new file mode 100644 > index 0..9e03c726f290c > --- /dev/null > +++ b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c > @@ -0,0 +1,959 @@ > [snip] > +int cdns_hdptx_hdmi_phy_valid(struct phy *phy, enum phy_mode mode, int > submode, + union phy_configure_opts *opts) This function can be made static. Thanks and best regards, Alexander > +{ > + u32 rate = opts->hdmi.pixel_clk_rate; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(pixel_clk_output_ctrl_table); i++) > + if (rate == pixel_clk_output_ctrl_table[i].pixel_clk_freq_min) > + return 0; > + > + return -EINVAL; > +} > + > +static int cdns_hdptx_hdmi_phy_init(struct phy *phy) > +{ > + return 0; > +} > + > +static int cdns_hdptx_hdmi_configure(struct phy *phy, > + union phy_configure_opts *opts) > +{ > + struct cdns_hdptx_hdmi_phy *cdns_phy = phy_get_drvdata(phy); > + int ret; > + > + cdns_phy->pixel_clk_rate = opts->hdmi.pixel_clk_rate; > + cdns_phy->color_space = opts->hdmi.color_space; > + cdns_phy->bpc = opts->hdmi.bpc; > + > + /* Check HDMI FW alive before HDMI PHY init */ > + ret = hdptx_phy_check_alive(cdns_phy); > + if (!ret) { > + dev_err(cdns_phy->dev, "NO HDMI FW running\n"); > + return -ENXIO; > + } > + > + /* Configure PHY */ > + if (hdptx_hdmi_phy_cfg(cdns_phy, cdns_phy->pixel_clk_rate) < 0) { > + dev_err(cdns_phy->dev, "failed to set phy pclock\n"); > + return -EINVAL; > + } > + > + ret = hdptx_hdmi_phy_power_up(cdns_phy); > + if (ret < 0) > + return ret; > + > + hdptx_hdmi_phy_set_vswing(cdns_phy); > + > + return 0; > +} > + > +static const struct phy_ops cdns_hdptx_hdmi_phy_ops = { > + .init = cdns_hdptx_hdmi_phy_init, > + .configure = cdns_hdptx_hdmi_configure, > + .power_on = cdns_hdptx_hdmi_phy_on, > + .power_off = cdns_hdptx_hdmi_phy_off, > + .validate = cdns_hdptx_hdmi_phy_valid, > + .owner = THIS_MODULE, > +}; > + > +static int cdns_hdptx_hdmi_phy_probe(struct platform_device *pdev) > +{ > + struct cdns_hdptx_hdmi_phy *cdns_phy; > + struct device *dev = >dev; > + struct device_node *node = dev->of_node; > + struct phy_provider *phy_provider; > + struct resource *res; > + struct phy *phy; > + int ret; > + > + cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL); > + if (!cdns_phy) > + return -ENOMEM; > + > + dev_set_drvdata(dev, cdns_phy); > + cdns_phy->dev = dev; > + mutex_init(_phy->mbox_mutex); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + return -ENODEV; > +
[PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ
Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ. Cadence HDP-TX PHY could be put in either DP mode or HDMI mode base on the configuration chosen. HDMI PHY mode is configurated in the driver. Signed-off-by: Sandor Yu Tested-by: Alexander Stein --- v11->v12: - Adjust clk disable order. - Return error code to replace -1 for function wait_for_ack(). - Use bool for variable pclk_in. - Add year 2024 to copyright. drivers/phy/freescale/Kconfig | 10 + drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 959 3 files changed, 970 insertions(+) create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig index c39709fd700ac..14f47b7cc77ab 100644 --- a/drivers/phy/freescale/Kconfig +++ b/drivers/phy/freescale/Kconfig @@ -45,6 +45,16 @@ config PHY_FSL_IMX8MQ_DP Enable this to support the Cadence HDPTX DP PHY driver on i.MX8MQ SOC. +config PHY_FSL_IMX8MQ_HDMI + tristate "Freescale i.MX8MQ HDMI PHY support" + depends on OF && HAS_IOMEM + depends on COMMON_CLK + select GENERIC_PHY + select CDNS_MHDP_HELPER + help + Enable this to support the Cadence HDPTX HDMI PHY driver + on i.MX8MQ SOC. + endif config PHY_FSL_LYNX_28G diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile index 47e5285209fa8..1380ac31c2ead 100644 --- a/drivers/phy/freescale/Makefile +++ b/drivers/phy/freescale/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PHY_FSL_IMX8MQ_DP)+= phy-fsl-imx8mq-dp.o +obj-$(CONFIG_PHY_FSL_IMX8MQ_HDMI) += phy-fsl-imx8mq-hdmi.o obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c new file mode 100644 index 0..9e03c726f290c --- /dev/null +++ b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cadence High-Definition Multimedia Interface (HDMI) PHY driver + * + * Copyright (C) 2022-2024 NXP Semiconductor, Inc. + */ +#include +#include +#include +#include +#include +#include +#include + +#define ADDR_PHY_AFE 0x8 + +/* PHY registers */ +#define CMN_SSM_BIAS_TMR 0x0022 +#define CMN_PLLSM0_USER_DEF_CTRL 0x002f +#define CMN_PSM_CLK_CTRL 0x0061 +#define CMN_CDIAG_REFCLK_CTRL 0x0062 +#define CMN_PLL0_VCOCAL_START 0x0081 +#define CMN_PLL0_VCOCAL_INIT_TMR 0x0084 +#define CMN_PLL0_VCOCAL_ITER_TMR 0x0085 +#define CMN_TXPUCAL_CTRL 0x00e0 +#define CMN_TXPDCAL_CTRL 0x00f0 +#define CMN_TXPU_ADJ_CTRL 0x0108 +#define CMN_TXPD_ADJ_CTRL 0x010c +#define CMN_DIAG_PLL0_FBH_OVRD 0x01c0 +#define CMN_DIAG_PLL0_FBL_OVRD 0x01c1 +#define CMN_DIAG_PLL0_OVRD 0x01c2 +#define CMN_DIAG_PLL0_TEST_MODE0x01c4 +#define CMN_DIAG_PLL0_V2I_TUNE 0x01c5 +#define CMN_DIAG_PLL0_CP_TUNE 0x01c6 +#define CMN_DIAG_PLL0_LF_PROG 0x01c7 +#define CMN_DIAG_PLL0_PTATIS_TUNE1 0x01c8 +#define CMN_DIAG_PLL0_PTATIS_TUNE2 0x01c9 +#define CMN_DIAG_PLL0_INCLK_CTRL 0x01ca +#define CMN_DIAG_PLL0_PXL_DIVH 0x01cb +#define CMN_DIAG_PLL0_PXL_DIVL 0x01cc +#define CMN_DIAG_HSCLK_SEL 0x01e0 +#define XCVR_PSM_RCTRL 0x4001 +#define TX_TXCC_CAL_SCLR_MULT_00x4047 +#define TX_TXCC_CPOST_MULT_00_00x404c +#define XCVR_DIAG_PLLDRC_CTRL 0x40e0 +#define XCVR_DIAG_PLLDRC_CTRL 0x40e0 +#define XCVR_DIAG_HSCLK_SEL0x40e1 +#define XCVR_DIAG_BIDI_CTRL0x40e8 +#define TX_PSC_A0 0x4100 +#define TX_PSC_A1 0x4101 +#define TX_PSC_A2 0x4102 +#define TX_PSC_A3 0x4103 +#define TX_DIAG_TX_CTRL0x41e0 +#define TX_DIAG_TX_DRV 0x41e1 +#define TX_DIAG_BGREF_PREDRV_DELAY 0x41e7 +#define TX_DIAG_ACYA_0 0x41ff +#define TX_DIAG_ACYA_1 0x43ff +#define TX_DIAG_ACYA_2 0x45ff +#define TX_DIAG_ACYA_3 0x47ff +#define TX_ANA_CTRL_REG_1 0x5020 +#define TX_ANA_CTRL_REG_2 0x5021 +#define TX_DIG_CTRL_REG_2