Getting rotation info is cheap so we can do it on demand.
This is done in preparation for the removal of struct drm_fb_helper_crtc.
Cc: Hans de Goede
Signed-off-by: Noralf Trønnes
Acked-by: Daniel Vetter
---
drivers/gpu/drm/drm_fb_helper.c | 131
include/drm/drm_fb_helper.h | 8 --
2 files changed, 65 insertions(+), 74 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index eda8b63f350d..2f71160cc904 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -388,6 +388,49 @@ int drm_fb_helper_debug_leave(struct fb_info *info)
}
EXPORT_SYMBOL(drm_fb_helper_debug_leave);
+/* Check if the plane can hw rotate to match panel orientation */
+static bool drm_fb_helper_panel_rotation(struct drm_mode_set *modeset,
+unsigned int *rotation)
+{
+ struct drm_connector *connector = modeset->connectors[0];
+ struct drm_plane *plane = modeset->crtc->primary;
+ u64 valid_mask = 0;
+ unsigned int i;
+
+ if (!modeset->num_connectors)
+ return false;
+
+ switch (connector->display_info.panel_orientation) {
+ case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+ *rotation = DRM_MODE_ROTATE_180;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+ *rotation = DRM_MODE_ROTATE_90;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+ *rotation = DRM_MODE_ROTATE_270;
+ break;
+ default:
+ *rotation = DRM_MODE_ROTATE_0;
+ }
+
+ /*
+* TODO: support 90 / 270 degree hardware rotation,
+* depending on the hardware this may require the framebuffer
+* to be in a specific tiling format.
+*/
+ if (*rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property)
+ return false;
+
+ for (i = 0; i < plane->rotation_property->num_values; i++)
+ valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+ if (!(*rotation & valid_mask))
+ return false;
+
+ return true;
+}
+
static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool
active)
{
struct drm_device *dev = fb_helper->dev;
@@ -428,10 +471,13 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper
*fb_helper, bool activ
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set =
_helper->crtc_info[i].mode_set;
struct drm_plane *primary = mode_set->crtc->primary;
+ unsigned int rotation;
- /* Cannot fail as we've already gotten the plane state above */
- plane_state = drm_atomic_get_new_plane_state(state, primary);
- plane_state->rotation = fb_helper->crtc_info[i].rotation;
+ if (drm_fb_helper_panel_rotation(mode_set, )) {
+ /* Cannot fail as we've already gotten the plane state
above */
+ plane_state = drm_atomic_get_new_plane_state(state,
primary);
+ plane_state->rotation = rotation;
+ }
ret = __drm_atomic_helper_set_config(mode_set, state);
if (ret != 0)
@@ -871,7 +917,6 @@ int drm_fb_helper_init(struct drm_device *dev,
if (!fb_helper->crtc_info[i].mode_set.connectors)
goto out_free;
fb_helper->crtc_info[i].mode_set.num_connectors = 0;
- fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
}
i = 0;
@@ -2500,62 +2545,6 @@ static int drm_pick_crtcs(struct drm_fb_helper
*fb_helper,
return best_score;
}
-/*
- * This function checks if rotation is necessary because of panel orientation
- * and if it is, if it is supported.
- * If rotation is necessary and supported, it gets set in fb_crtc.rotation.
- * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
- * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
- * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
- * the unsupported rotation.
- */
-static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
- struct drm_fb_helper_crtc *fb_crtc,
- struct drm_connector *connector)
-{
- struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
- uint64_t valid_mask = 0;
- int i, rotation;
-
- fb_crtc->rotation = DRM_MODE_ROTATE_0;
-
- switch (connector->display_info.panel_orientation) {
- case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
- rotation = DRM_MODE_ROTATE_180;
- break;
- case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
- rotation = DRM_MODE_ROTATE_90;
- break;
- case