RE: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
Hi Daniel, > On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote: > > NOTE: there are no compatibility problems with the previous version, > > since the device driver has not yet been included in any kernel. > > Only this dt-binding yaml file is already included in the > > "for-backlight-next" branch of the "backlight" kernel repository. > > No developer may have used it. > > I'm afraid I got confused by the fragmented MP3309C patches from all the > different patchsets. > > Please can you rebase whatever is left on v6.7-rc1 and send a single patchset > with all pending changes as a single patch set. > No problem, I'll do it! > > Thanks > > Daniel. Regards, Flavio
Re: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote: > NOTE: there are no compatibility problems with the previous version, > since the device driver has not yet been included in any kernel. > Only this dt-binding yaml file is already included in the > "for-backlight-next" branch of the "backlight" kernel repository. > No developer may have used it. I'm afraid I got confused by the fragmented MP3309C patches from all the different patchsets. Please can you rebase whatever is left on v6.7-rc1 and send a single patchset with all pending changes as a single patch set. Thanks Daniel.
Re: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
On Wed, Oct 25, 2023 at 05:50:57PM +0200, Flavio Suligoi wrote:
> The two properties:
>
> - max-brightness
> - default brightness
>
> are not really required, so they can be removed from the "required"
> section.
> The "max-brightness" is no longer used in the current version
> of the driver (it was used only in the first version).
> The "default-brightness", if omitted in the DT, is managed by the
> device driver, using a default value. This value depends on the dimming
> mode used:
>
> - for the "analog mode", via I2C commands, this value is fixed by
> hardware (=31)
> - while in case of pwm mode the default used is the last value of the
> brightness-levels array.
>
> Also the brightness-levels array is not required:
>
> - in "analog mode", via I2C commands, the brightness-level array is
> fixed by hardware (0..31).;
> - in pwm dimming mode, the driver uses a default array of 0..255 and
> the "default-brightness" is the last one, which is "255"
>
> NOTE: there are no compatibility problems with the previous version,
> since the device driver has not yet been included in any kernel.
> Only this dt-binding yaml file is already included in the
> "for-backlight-next" branch of the "backlight" kernel repository.
> No developer may have used it.
I'd argue
Fixes: 02c4e661658f ("dt-bindings: backlight: Add MPS MP3309C")
but that's up to Lee.
Acked-by: Conor Dooley
Thanks,
Conor.
>
> Other changes:
>
> - improve the backlight working mode description, in the "description"
> section
> - update the example, removing the "max-brightness" and introducing the
> "brightess-levels" property
>
> Signed-off-by: Flavio Suligoi
> ---
> .../bindings/leds/backlight/mps,mp3309c.yaml | 10 --
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> index 4191e33626f5..527a37368ed7 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> @@ -14,8 +14,8 @@ description: |
>programmable switching frequency to optimize efficiency.
>It supports two different dimming modes:
>
> - - analog mode, via I2C commands (default)
> - - PWM controlled mode.
> + - analog mode, via I2C commands, as default mode (32 dimming levels)
> + - PWM controlled mode (optional)
>
>The datasheet is available at:
>https://www.monolithicpower.com/en/mp3309c.html
> @@ -50,8 +50,6 @@ properties:
> required:
>- compatible
>- reg
> - - max-brightness
> - - default-brightness
>
> unevaluatedProperties: false
>
> @@ -66,8 +64,8 @@ examples:
> compatible = "mps,mp3309c";
> reg = <0x17>;
> pwms = <&pwm1 0 333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> -max-brightness = <100>;
> -default-brightness = <80>;
> +brightness-levels = <0 4 8 16 32 64 128 255>;
> +default-brightness = <6>;
> mps,overvoltage-protection-microvolt = <2400>;
> };
> };
> --
> 2.34.1
>
signature.asc
Description: PGP signature
[PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
The two properties: - max-brightness - default brightness are not really required, so they can be removed from the "required" section. The "max-brightness" is no longer used in the current version of the driver (it was used only in the first version). The "default-brightness", if omitted in the DT, is managed by the device driver, using a default value. This value depends on the dimming mode used: - for the "analog mode", via I2C commands, this value is fixed by hardware (=31) - while in case of pwm mode the default used is the last value of the brightness-levels array. Also the brightness-levels array is not required: - in "analog mode", via I2C commands, the brightness-level array is fixed by hardware (0..31).; - in pwm dimming mode, the driver uses a default array of 0..255 and the "default-brightness" is the last one, which is "255" NOTE: there are no compatibility problems with the previous version, since the device driver has not yet been included in any kernel. Only this dt-binding yaml file is already included in the "for-backlight-next" branch of the "backlight" kernel repository. No developer may have used it. Other changes: - improve the backlight working mode description, in the "description" section - update the example, removing the "max-brightness" and introducing the "brightess-levels" property Signed-off-by: Flavio Suligoi --- .../bindings/leds/backlight/mps,mp3309c.yaml | 10 -- 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml index 4191e33626f5..527a37368ed7 100644 --- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml @@ -14,8 +14,8 @@ description: | programmable switching frequency to optimize efficiency. It supports two different dimming modes: - - analog mode, via I2C commands (default) - - PWM controlled mode. + - analog mode, via I2C commands, as default mode (32 dimming levels) + - PWM controlled mode (optional) The datasheet is available at: https://www.monolithicpower.com/en/mp3309c.html @@ -50,8 +50,6 @@ properties: required: - compatible - reg - - max-brightness - - default-brightness unevaluatedProperties: false @@ -66,8 +64,8 @@ examples: compatible = "mps,mp3309c"; reg = <0x17>; pwms = <&pwm1 0 333 0>; /* 300 Hz --> (1/f) * 1*10^9 */ -max-brightness = <100>; -default-brightness = <80>; +brightness-levels = <0 4 8 16 32 64 128 255>; +default-brightness = <6>; mps,overvoltage-protection-microvolt = <2400>; }; }; -- 2.34.1
