Hi all
On Sun, Oct 2, 2022 at 8:45 AM Michael Trimarchi
wrote:
>
> The rockchip phy can be convigured in ttl mode. The phy is shared
> between lvds, dsi, ttl. The configuration that now I'm able to support
> has the display output on some set of pins on standard vop output
> and a set of pins using the ttl phy. The solution is not clean as I
> would like to have because some register that are used to enable
> the TTL, are in the same register area of the dsi controller.
> In order to test I must add the following
>
> dsi_dphy: phy@ff2e {
>
> reg = <0x0 0xff2e 0x0 0x1>,
> <0x0 0xff45 0x0 0x1>;
> ...
> }
>
> The problem here is the second region I have added is the same of
> dsi logic. Only one register is needed by the the phy driver
>
Is there anyone who has time to review it?
Michael
> Michael Trimarchi (4):
> phy: add PHY_MODE_TTL
> phy: rockchip: Add inno_is_valid_phy_mode
> phy: rockchip: Implement TTY phy mode
> drm/rockchip: rgb: Add dphy connection to rgb output
>
> drivers/gpu/drm/rockchip/rockchip_rgb.c | 18 +
> .../phy/rockchip/phy-rockchip-inno-dsidphy.c | 72 +++
> include/linux/phy/phy.h | 3 +-
> 3 files changed, 92 insertions(+), 1 deletion(-)
>
> --
> 2.34.1
>
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
mich...@amarulasolutions.com
__
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
i...@amarulasolutions.com
www.amarulasolutions.com
