On Mon, 1 Nov 2021 at 11:01, tommy-huang wrote:
>
> The V-sync INTR_STS is differnet on AST2600.
> Change into general rule to handle it.
>
> Signed-off-by: tommy-huang
> ---
> drivers/gpu/drm/aspeed/aspeed_gfx.h | 2 ++
> drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 26 ++---
> 2 files changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index 96501152bafa..5eed9275bce7 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -12,6 +12,8 @@ struct aspeed_gfx {
> struct regmap *scu;
>
> u32 dac_reg;
> + u32 int_reg;
> + u32 int_clr_reg;
> u32 vga_scratch_reg;
> u32 throd_val;
> u32 scan_line_max;
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index b53fee6f1c17..1092060cb59c 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -60,6 +60,8 @@
>
> struct aspeed_gfx_config {
> u32 dac_reg;/* DAC register in SCU */
> + u32 int_status_reg; /* Interrupt status register */
This is the same for all supported chips; do you need to introduce the
variable for it?
> + u32 int_clear_reg; /* Interrupt clear register */
> u32 vga_scratch_reg;/* VGA scratch register in SCU */
> u32 throd_val; /* Default Threshold Seting */
> u32 scan_line_max; /* Max memory size of one scan line */
> @@ -67,6 +69,8 @@ struct aspeed_gfx_config {
>
> static const struct aspeed_gfx_config ast2400_config = {
> .dac_reg = 0x2c,
> + .int_status_reg = 0x60,
> + .int_clear_reg = 0x60,
> .vga_scratch_reg = 0x50,
> .throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
> .scan_line_max = 64,
> @@ -74,14 +78,26 @@ static const struct aspeed_gfx_config ast2400_config = {
>
> static const struct aspeed_gfx_config ast2500_config = {
> .dac_reg = 0x2c,
> + .int_status_reg = 0x60,
> + .int_clear_reg = 0x60,
> .vga_scratch_reg = 0x50,
> .throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
> .scan_line_max = 128,
> };
>
> +static const struct aspeed_gfx_config ast2600_config = {
> + .dac_reg = 0xc0,
> + .int_status_reg = 0x60,
> + .int_clear_reg = 0x68,
> + .vga_scratch_reg = 0x50,
> + .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
> + .scan_line_max = 128,
> +};
This patch combines adding the clear_reg functionality with support
for the 2600. Can you split them out; add int_clear_reg first, and
then add support for the 2600 in the following patch?
> +
> static const struct of_device_id aspeed_gfx_match[] = {
> { .compatible = "aspeed,ast2400-gfx", .data = _config },
> { .compatible = "aspeed,ast2500-gfx", .data = _config },
> + { .compatible = "aspeed,ast2600-gfx", .data = _config },
> { },
> };
> MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
> @@ -113,13 +129,15 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void
> *data)
> {
> struct drm_device *drm = data;
> struct aspeed_gfx *priv = to_aspeed_gfx(drm);
> - u32 reg;
> + u32 reg, clr_reg;
>
> - reg = readl(priv->base + CRT_CTRL1);
> + reg = readl(priv->base + priv->int_reg);
>
> if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
> drm_crtc_handle_vblank(>pipe.crtc);
> - writel(reg, priv->base + CRT_CTRL1);
> + clr_reg = (readl(priv->base + priv->int_clr_reg) |
> + CRT_CTRL_VERTICAL_INTR_STS);
> + writel(clr_reg, priv->base + priv->int_clr_reg);
You do not need to do read-modify-write.
On the 2500 you're writing back the value you read. On the 2600 all of
the bits are read only except the INTR_STS bit, which is W1C, so you
can use the value you read from CRT_CTRL1, so this should be enough:
writel(reg, priv->base + priv->int_clr_reg);
> return IRQ_HANDLED;
> }
>
> @@ -147,6 +165,8 @@ static int aspeed_gfx_load(struct drm_device *drm)
> config = match->data;
>
> priv->dac_reg = config->dac_reg;
> + priv->int_reg = config->int_status_reg;
> + priv->int_clr_reg = config->int_clear_reg;
> priv->vga_scratch_reg = config->vga_scratch_reg;
> priv->throd_val = config->throd_val;
> priv->scan_line_max = config->scan_line_max;
> --
> 2.17.1
>
