Re: [PATCH 0/4] drm/bridge/adv7511: add CEC support
On 10/08/17 11:08, Archit Taneja wrote: > > > On 08/10/2017 02:26 PM, Hans Verkuil wrote: >> On 10/08/17 10:49, Archit Taneja wrote: >>> Hi Hans, >>> >>> On 07/30/2017 06:37 PM, Hans Verkuil wrote: From: Hans VerkuilThis patch series adds CEC support to the drm adv7511/adv7533 drivers. I have tested this with the Qualcomm Dragonboard C410 (adv7533 based) and the Renesas R-Car Koelsch board (adv7511 based). Note: the Dragonboard needs this patch: https://patchwork.kernel.org/patch/9824773/ Archit, can you confirm that this patch will go to kernel 4.14? And the Koelsch board needs this 4.13 fix: https://patchwork.kernel.org/patch/9836865/ I only have the Koelsch board to test with, but it looks like other R-Car boards use the same adv7511. It would be nice if someone can add CEC support to the other R-Car boards as well. The main thing to check is if they all use the same 12 MHz fixed CEC clock source. Anyone who wants to test this will need the CEC utilities that are part of the v4l-utils git repository: git clone git://linuxtv.org/v4l-utils.git cd v4l-utils ./bootstrap.sh ./configure make sudo make install Now configure the CEC adapter as a Playback device: cec-ctl --playback Discover other CEC devices: cec-ctl -S >>> >>> I tried the instructions, and I get the following output. I don't think I >>> have >>> any CEC device connected, though. Is this the expected behaviour? >>> >>> #cec-ctl -S >>> Driver Info: >>> Driver Name: adv7511 >>> Adapter Name : 3-0039 >>> Capabilities : 0x000e >>> Logical Addresses >>> Transmit >>> Passthrough >>> Driver version : 4.13.0 >>> Available Logical Addresses: 3 >>> Physical Address : 1.0.0.0 >>> Logical Address Mask : 0x >>> CEC Version: 2.0 >>> Logical Addresses : 0 >>> >>> #cec-ctl --playback >>> [ 1038.761545] cec-3-0039: cec_thread_func: message 44 timed out! >> >> This isn't right. You shouldn't see this. It never receives an interrupt >> when the transmit has finished, which causes these time outs. >> >> What are you testing this on? The Dragonboard c410? > > Yes. On top of which kernel tree are these patches applied? I can try and reproduce it. Regards, Hans ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/4] drm/bridge/adv7511: add CEC support
On 08/10/2017 02:26 PM, Hans Verkuil wrote: On 10/08/17 10:49, Archit Taneja wrote: Hi Hans, On 07/30/2017 06:37 PM, Hans Verkuil wrote: From: Hans VerkuilThis patch series adds CEC support to the drm adv7511/adv7533 drivers. I have tested this with the Qualcomm Dragonboard C410 (adv7533 based) and the Renesas R-Car Koelsch board (adv7511 based). Note: the Dragonboard needs this patch: https://patchwork.kernel.org/patch/9824773/ Archit, can you confirm that this patch will go to kernel 4.14? And the Koelsch board needs this 4.13 fix: https://patchwork.kernel.org/patch/9836865/ I only have the Koelsch board to test with, but it looks like other R-Car boards use the same adv7511. It would be nice if someone can add CEC support to the other R-Car boards as well. The main thing to check is if they all use the same 12 MHz fixed CEC clock source. Anyone who wants to test this will need the CEC utilities that are part of the v4l-utils git repository: git clone git://linuxtv.org/v4l-utils.git cd v4l-utils ./bootstrap.sh ./configure make sudo make install Now configure the CEC adapter as a Playback device: cec-ctl --playback Discover other CEC devices: cec-ctl -S I tried the instructions, and I get the following output. I don't think I have any CEC device connected, though. Is this the expected behaviour? #cec-ctl -S Driver Info: Driver Name: adv7511 Adapter Name : 3-0039 Capabilities : 0x000e Logical Addresses Transmit Passthrough Driver version : 4.13.0 Available Logical Addresses: 3 Physical Address : 1.0.0.0 Logical Address Mask : 0x CEC Version: 2.0 Logical Addresses : 0 #cec-ctl --playback [ 1038.761545] cec-3-0039: cec_thread_func: message 44 timed out! This isn't right. You shouldn't see this. It never receives an interrupt when the transmit has finished, which causes these time outs. What are you testing this on? The Dragonboard c410? Yes. Can you check the cec clock frequency? It should be 19.2 MHz. Remember to apply this patch: https://patchwork.kernel.org/patch/9824773/ You probably did, but just in case... clk_summary does show bb_clk2 to be set to 19.2 Mhz. I applied a newer version of this patch, which got merged in clk-next: https://patchwork.kernel.org/patch/9845493/ I will try to apply the patch you use and check again. Thanks, Archit Regards, Hans Driver Info: Driver Name: adv7511 Adapter Name : 3-0039 Capabilities : 0x000e Logical Addresses Transmit Passthrough Driver version : 4.13.0 Available Logical Addresses: 3 Physical Address : 1.0.0.0 Logical Address Mask : 0x0010 CEC Version: 2.0 Vendor ID : 0x000c03 Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 4 Primary Device Type: Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features: None [ 1041.063605] cec-3-0039: cec_thread_func: message 4f a6 06 10 00 00 timed out! [ 1043.367482] cec-3-0039: cec_thread_func: message 4f 84 10 00 04 timed out! Thanks, Archit Regards, Hans Hans Verkuil (4): dt-bindings: adi,adv7511.txt: document cec clock arm: dts: qcom: add cec clock for apq8016 board arm: dts: renesas: add cec clock for Koelsch board drm: adv7511/33: add HDMI CEC support .../bindings/display/bridge/adi,adv7511.txt| 4 + arch/arm/boot/dts/r8a7791-koelsch.dts | 8 + arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 + drivers/gpu/drm/bridge/adv7511/Kconfig | 8 + drivers/gpu/drm/bridge/adv7511/Makefile| 1 + drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 ++- drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +- drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +- 9 files changed, 514 insertions(+), 50 deletions(-) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list
Re: [PATCH 0/4] drm/bridge/adv7511: add CEC support
On 10/08/17 10:49, Archit Taneja wrote: > Hi Hans, > > On 07/30/2017 06:37 PM, Hans Verkuil wrote: >> From: Hans Verkuil>> >> This patch series adds CEC support to the drm adv7511/adv7533 drivers. >> >> I have tested this with the Qualcomm Dragonboard C410 (adv7533 based) >> and the Renesas R-Car Koelsch board (adv7511 based). >> >> Note: the Dragonboard needs this patch: >> >> https://patchwork.kernel.org/patch/9824773/ >> >> Archit, can you confirm that this patch will go to kernel 4.14? >> >> And the Koelsch board needs this 4.13 fix: >> >> https://patchwork.kernel.org/patch/9836865/ >> >> I only have the Koelsch board to test with, but it looks like other >> R-Car boards use the same adv7511. It would be nice if someone can >> add CEC support to the other R-Car boards as well. The main thing >> to check is if they all use the same 12 MHz fixed CEC clock source. >> >> Anyone who wants to test this will need the CEC utilities that >> are part of the v4l-utils git repository: >> >> git clone git://linuxtv.org/v4l-utils.git >> cd v4l-utils >> ./bootstrap.sh >> ./configure >> make >> sudo make install >> >> Now configure the CEC adapter as a Playback device: >> >> cec-ctl --playback >> >> Discover other CEC devices: >> >> cec-ctl -S > > I tried the instructions, and I get the following output. I don't think I have > any CEC device connected, though. Is this the expected behaviour? > > #cec-ctl -S > Driver Info: > Driver Name: adv7511 > Adapter Name : 3-0039 > Capabilities : 0x000e > Logical Addresses > Transmit > Passthrough > Driver version : 4.13.0 > Available Logical Addresses: 3 > Physical Address : 1.0.0.0 > Logical Address Mask : 0x > CEC Version: 2.0 > Logical Addresses : 0 > > #cec-ctl --playback > [ 1038.761545] cec-3-0039: cec_thread_func: message 44 timed out! This isn't right. You shouldn't see this. It never receives an interrupt when the transmit has finished, which causes these time outs. What are you testing this on? The Dragonboard c410? Can you check the cec clock frequency? It should be 19.2 MHz. Remember to apply this patch: https://patchwork.kernel.org/patch/9824773/ You probably did, but just in case... Regards, Hans > Driver Info: > Driver Name: adv7511 > Adapter Name : 3-0039 > Capabilities : 0x000e > Logical Addresses > Transmit > Passthrough > Driver version : 4.13.0 > Available Logical Addresses: 3 > Physical Address : 1.0.0.0 > Logical Address Mask : 0x0010 > CEC Version: 2.0 > Vendor ID : 0x000c03 > Logical Addresses : 1 (Allow RC Passthrough) > > Logical Address : 4 > Primary Device Type: Playback > Logical Address Type : Playback > All Device Types : Playback > RC TV Profile : None > Device Features: > None > > > [ 1041.063605] cec-3-0039: cec_thread_func: message 4f a6 06 10 00 00 timed > out! > [ 1043.367482] cec-3-0039: cec_thread_func: message 4f 84 10 00 04 timed out! > > Thanks, > Archit > >> >> Regards, >> >> Hans >> >> Hans Verkuil (4): >>dt-bindings: adi,adv7511.txt: document cec clock >>arm: dts: qcom: add cec clock for apq8016 board >>arm: dts: renesas: add cec clock for Koelsch board >>drm: adv7511/33: add HDMI CEC support >> >> .../bindings/display/bridge/adi,adv7511.txt| 4 + >> arch/arm/boot/dts/r8a7791-koelsch.dts | 8 + >> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 + >> drivers/gpu/drm/bridge/adv7511/Kconfig | 8 + >> drivers/gpu/drm/bridge/adv7511/Makefile| 1 + >> drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 ++- >> drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 >> + >> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +- >> drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +- >> 9 files changed, 514 insertions(+), 50 deletions(-) >> create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c >> > ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/4] drm/bridge/adv7511: add CEC support
Hi Hans, On 07/30/2017 06:37 PM, Hans Verkuil wrote: From: Hans VerkuilThis patch series adds CEC support to the drm adv7511/adv7533 drivers. I have tested this with the Qualcomm Dragonboard C410 (adv7533 based) and the Renesas R-Car Koelsch board (adv7511 based). Note: the Dragonboard needs this patch: https://patchwork.kernel.org/patch/9824773/ Archit, can you confirm that this patch will go to kernel 4.14? And the Koelsch board needs this 4.13 fix: https://patchwork.kernel.org/patch/9836865/ I only have the Koelsch board to test with, but it looks like other R-Car boards use the same adv7511. It would be nice if someone can add CEC support to the other R-Car boards as well. The main thing to check is if they all use the same 12 MHz fixed CEC clock source. Anyone who wants to test this will need the CEC utilities that are part of the v4l-utils git repository: git clone git://linuxtv.org/v4l-utils.git cd v4l-utils ./bootstrap.sh ./configure make sudo make install Now configure the CEC adapter as a Playback device: cec-ctl --playback Discover other CEC devices: cec-ctl -S I tried the instructions, and I get the following output. I don't think I have any CEC device connected, though. Is this the expected behaviour? #cec-ctl -S Driver Info: Driver Name: adv7511 Adapter Name : 3-0039 Capabilities : 0x000e Logical Addresses Transmit Passthrough Driver version : 4.13.0 Available Logical Addresses: 3 Physical Address : 1.0.0.0 Logical Address Mask : 0x CEC Version: 2.0 Logical Addresses : 0 #cec-ctl --playback [ 1038.761545] cec-3-0039: cec_thread_func: message 44 timed out! Driver Info: Driver Name: adv7511 Adapter Name : 3-0039 Capabilities : 0x000e Logical Addresses Transmit Passthrough Driver version : 4.13.0 Available Logical Addresses: 3 Physical Address : 1.0.0.0 Logical Address Mask : 0x0010 CEC Version: 2.0 Vendor ID : 0x000c03 Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 4 Primary Device Type: Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features: None [ 1041.063605] cec-3-0039: cec_thread_func: message 4f a6 06 10 00 00 timed out! [ 1043.367482] cec-3-0039: cec_thread_func: message 4f 84 10 00 04 timed out! Thanks, Archit Regards, Hans Hans Verkuil (4): dt-bindings: adi,adv7511.txt: document cec clock arm: dts: qcom: add cec clock for apq8016 board arm: dts: renesas: add cec clock for Koelsch board drm: adv7511/33: add HDMI CEC support .../bindings/display/bridge/adi,adv7511.txt| 4 + arch/arm/boot/dts/r8a7791-koelsch.dts | 8 + arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 + drivers/gpu/drm/bridge/adv7511/Kconfig | 8 + drivers/gpu/drm/bridge/adv7511/Makefile| 1 + drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 ++- drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +- drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +- 9 files changed, 514 insertions(+), 50 deletions(-) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 0/4] drm/bridge/adv7511: add CEC support
On 07/30/2017 06:37 PM, Hans Verkuil wrote: From: Hans VerkuilThis patch series adds CEC support to the drm adv7511/adv7533 drivers. I have tested this with the Qualcomm Dragonboard C410 (adv7533 based) and the Renesas R-Car Koelsch board (adv7511 based). Note: the Dragonboard needs this patch: https://patchwork.kernel.org/patch/9824773/ Archit, can you confirm that this patch will go to kernel 4.14? Yes, it's been queued to clk-next. Thanks, Archit And the Koelsch board needs this 4.13 fix: https://patchwork.kernel.org/patch/9836865/ I only have the Koelsch board to test with, but it looks like other R-Car boards use the same adv7511. It would be nice if someone can add CEC support to the other R-Car boards as well. The main thing to check is if they all use the same 12 MHz fixed CEC clock source. Anyone who wants to test this will need the CEC utilities that are part of the v4l-utils git repository: git clone git://linuxtv.org/v4l-utils.git cd v4l-utils ./bootstrap.sh ./configure make sudo make install Now configure the CEC adapter as a Playback device: cec-ctl --playback Discover other CEC devices: cec-ctl -S Regards, Hans Hans Verkuil (4): dt-bindings: adi,adv7511.txt: document cec clock arm: dts: qcom: add cec clock for apq8016 board arm: dts: renesas: add cec clock for Koelsch board drm: adv7511/33: add HDMI CEC support .../bindings/display/bridge/adi,adv7511.txt| 4 + arch/arm/boot/dts/r8a7791-koelsch.dts | 8 + arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 + drivers/gpu/drm/bridge/adv7511/Kconfig | 8 + drivers/gpu/drm/bridge/adv7511/Makefile| 1 + drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 ++- drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +- drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +- 9 files changed, 514 insertions(+), 50 deletions(-) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel