From: Josh Cartwright <josh.cartwri...@ni.com>
Create an option CONFIG_LED_TRIGGER_PHY (default n), which will
create a set of led triggers for each instantiated PHY device. There is
one LED trigger per link-speed, per-phy.
This allows for a user to configure their system to allow a set of LEDs
to represent link state changes on the phy.
Signed-off-by: Josh Cartwright <josh.cartwri...@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sulli...@ni.com>
Signed-off-by: Zach Brown <zach.br...@ni.com>
---
drivers/net/phy/Kconfig | 13 +++-
drivers/net/phy/Makefile | 1 +
drivers/net/phy/phy.c | 1 +
drivers/net/phy/phy_device.c | 4 ++
drivers/net/phy/phy_led_triggers.c | 121 +++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 9 +++
include/linux/phy_led_triggers.h | 52 ++++++++++++++++
7 files changed, 200 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/phy/phy_led_triggers.c
create mode 100644 include/linux/phy_led_triggers.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1c3e07c..f233625 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -25,6 +25,18 @@ config MDIO_BCM_IPROC
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
+config LED_TRIGGER_PHY
+ bool "Support LED triggers for tracking link state"
+ depends on LEDS_TRIGGERS
+ ---help---
+ Adds support for a set of LED trigger events per-PHY. Link
+ state change will trigger the events, for consumption by an
+ LED class driver. There are triggers for each link speed,
+ and are of the form:
+ <mii bus id>:<phy>:<speed>
+
+ Where speed is one of: 10Mbps, 100Mbps, 1Gbps, 2.5Gbps, or 10Gbps.
+
config MDIO_BCM_UNIMAC
tristate "Broadcom UniMAC MDIO bus controller"
depends on HAS_IOMEM
@@ -40,7 +52,6 @@ config MDIO_BITBANG
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
drive the relevant pins.
-
If in doubt, say N.
config MDIO_BUS_MUX
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index e58667d..86d12cd 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -2,6 +2,7 @@
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
libphy-$(CONFIG_SWPHY) += swphy.o
+libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
obj-$(CONFIG_PHYLIB) += libphy.o
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f5721db..e5f9fee7 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -896,6 +896,7 @@ EXPORT_SYMBOL(phy_start);
static void phy_adjust_link(struct phy_device *phydev)
{
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
}
/**
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e977ba9..4671c13 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -30,6 +30,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/phy_led_triggers.h>
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>
@@ -57,6 +58,7 @@ static void phy_mdio_device_free(struct mdio_device *mdiodev)
static void phy_device_release(struct device *dev)
{
+ phy_led_triggers_unregister(to_phy_device(dev));
kfree(to_phy_device(dev));
}
@@ -345,6 +347,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus,
int addr, int phy_id,
dev->state = PHY_DOWN;
+ phy_led_triggers_register(dev);
+
mutex_init(&dev->lock);
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
INIT_WORK(&dev->phy_queue, phy_change);
diff --git a/drivers/net/phy/phy_led_triggers.c
b/drivers/net/phy/phy_led_triggers.c
new file mode 100644
index 0000000..32326d7
--- /dev/null
+++ b/drivers/net/phy/phy_led_triggers.c
@@ -0,0 +1,121 @@
+/* Copyright (C) 2016 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+static struct phy_led_trigger *phy_speed_to_led_trigger(struct phy_device *phy,
+ unsigned int speed)
+{
+ switch (speed) {
+ case SPEED_10:
+ return &phy->phy_led_trigger[0];
+ case SPEED_100:
+ return &phy->phy_led_trigger[1];
+ case SPEED_1000:
+ return &phy->phy_led_trigger[2];
+ case SPEED_2500:
+ return &phy->phy_led_trigger[3];
+ case SPEED_10000:
+ return &phy->phy_led_trigger[4];
+ default:
+ return NULL;
+ }
+}
+
+void phy_led_trigger_change_speed(struct phy_device *phy)
+{
+ struct phy_led_trigger *plt;
+
+ if (!phy->link)
+ goto out_change_speed;
+
+ if (phy->speed == 0)
+ return;
+
+ plt = phy_speed_to_led_trigger(phy, phy->speed);
+ if (!plt) {
+ netdev_alert(phy->attached_dev,
+ "Unsupported trigger speed %u (update
phy_led_trigger.c)\n",
+ phy->speed);
+ goto out_change_speed;
+ }
+
+ if (plt != phy->last_triggered) {
+ led_trigger_event(&phy->last_triggered->trigger, LED_OFF);
+ led_trigger_event(&plt->trigger, LED_FULL);
+ phy->last_triggered = plt;
+ }
+ return;
+
+out_change_speed:
+ if (phy->last_triggered) {
+ led_trigger_event(&phy->last_triggered->trigger,
+ LED_OFF);
+ phy->last_triggered = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(phy_led_trigger_change_speed);
+
+static int phy_led_trigger_register(struct phy_device *phy,
+ struct phy_led_trigger *plt, int i)
+{
+ static const char * const name_suffix[] = {
+ "10Mbps",
+ "100Mbps",
+ "1Gbps",
+ "2.5Gbps",
+ "10Gbps",
+ };
+ snprintf(plt->name, sizeof(plt->name), PHY_ID_FMT ":%s",
+ phy->mdio.bus->id, phy->mdio.addr, name_suffix[i]);
+ plt->trigger.name = plt->name;
+ return led_trigger_register(&plt->trigger);
+}
+
+static void phy_led_trigger_unregister(struct phy_led_trigger *plt)
+{
+ led_trigger_unregister(&plt->trigger);
+}
+
+int phy_led_triggers_register(struct phy_device *phy)
+{
+ int i, err;
+
+ for (i = 0; i < ARRAY_SIZE(phy->phy_led_trigger); i++) {
+ err = phy_led_trigger_register(phy, &phy->phy_led_trigger[i],
+ i);
+ if (err)
+ goto out_unreg;
+ }
+
+ phy->last_triggered = NULL;
+ phy_led_trigger_change_speed(phy);
+
+ return 0;
+
+out_unreg:
+ while (i--)
+ phy_led_trigger_unregister(&phy->phy_led_trigger[i]);
+ return err;
+}
+EXPORT_SYMBOL_GPL(phy_led_triggers_register);
+
+void phy_led_triggers_unregister(struct phy_device *phy)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(phy->phy_led_trigger); i++)
+ phy_led_trigger_unregister(&phy->phy_led_trigger[i]);
+}
+EXPORT_SYMBOL_GPL(phy_led_triggers_unregister);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2d24b28..32a756b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -25,6 +25,7 @@
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/mod_devicetable.h>
+#include <linux/phy_led_triggers.h>
#include <linux/atomic.h>
@@ -402,6 +403,14 @@ struct phy_device {
int link_timeout;
+#ifdef CONFIG_LED_TRIGGER_PHY
+ /*
+ * A led_trigger per SPEED_*
+ */
+ struct phy_led_trigger phy_led_trigger[PHY_LINK_LED_MAX_TRIGGERS];
+ struct phy_led_trigger *last_triggered;
+#endif
+
/*
* Interrupt number for this PHY
* -1 means no interrupt
diff --git a/include/linux/phy_led_triggers.h b/include/linux/phy_led_triggers.h
new file mode 100644
index 0000000..dfea5d6
--- /dev/null
+++ b/include/linux/phy_led_triggers.h
@@ -0,0 +1,52 @@
+/* Copyright (C) 2016 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PHY_LED_TRIGGERS
+#define __PHY_LED_TRIGGERS
+
+struct phy_device;
+
+#ifdef CONFIG_LED_TRIGGER_PHY
+
+#include <linux/leds.h>
+#include <linux/phy.h>
+
+#define PHY_LINK_LED_MAX_TRIGGERS 5
+#define PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE 7
+#define PHY_MII_BUS_ID_SIZE (20 - 3)
+
+#define PHY_LINK_LED_TRIGGER_NAME_SIZE (PHY_MII_BUS_ID_SIZE + \
+ FIELD_SIZEOF(struct mdio_device, addr)+\
+ PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE)
+
+struct phy_led_trigger {
+ struct led_trigger trigger;
+ char name[PHY_LINK_LED_TRIGGER_NAME_SIZE];
+};
+
+
+extern int phy_led_triggers_register(struct phy_device *phy);
+extern void phy_led_triggers_unregister(struct phy_device *phy);
+extern void phy_led_trigger_change_speed(struct phy_device *phy);
+
+#else
+
+static inline int phy_led_triggers_register(struct phy_device *phy)
+{
+ return 0;
+}
+static inline void phy_led_triggers_unregister(struct phy_device *phy) { }
+static inline void phy_led_trigger_change_speed(struct phy_device *phy) { }
+
+#endif
+
+#endif
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
