Re: [PATCH v9][ 6/8] staging: imx-drm: parallel display: add regulator support.

2014-03-06 Thread Philipp Zabel
Hi Denis,

Am Donnerstag, den 06.03.2014, 17:04 +0100 schrieb Denis Carikli:
 diff --git 
 a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt 
 b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
 index 2d24425..4dd7ce5 100644
 --- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
 +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
 @@ -28,6 +28,7 @@ Required properties:
  - compatible: Should be fsl,imx-parallel-display
  - crtc: the crtc this display is connected to, see below
  Optional properties:
 +- display-supply : phandle to the regulator device tree node if needed.

I'd very much prefer to not do this here. I have submitted a patch to
add drm_display support to this driver, so you can connect a drm_panel
compatible driver as output. The simple-panel driver already supports
supply regulator and backlight control.

regards
Philipp

  - interface_pix_fmt: How this display is connected to the
crtc. Currently supported types: rgb24, rgb565, bgr666, rgb666
  - edid: verbatim EDID data block describing attached display.
 diff --git a/drivers/staging/imx-drm/parallel-display.c 
 b/drivers/staging/imx-drm/parallel-display.c
 index 084500b..0e0c5ac 100644
 --- a/drivers/staging/imx-drm/parallel-display.c
 +++ b/drivers/staging/imx-drm/parallel-display.c
 @@ -24,6 +24,7 @@
  #include drm/drm_fb_helper.h
  #include drm/drm_crtc_helper.h
  #include drm/drm_panel.h
 +#include linux/regulator/consumer.h
  #include linux/videodev2.h
  #include video/of_display_timing.h
  
 @@ -36,6 +37,7 @@ struct imx_parallel_display {
   struct drm_connector connector;
   struct drm_encoder encoder;
   struct device *dev;
 + struct regulator *disp_reg;
   void *edid;
   int edid_len;
   u32 interface_pix_fmt;
 @@ -155,6 +157,9 @@ static void imx_pd_encoder_prepare(struct drm_encoder 
 *encoder)
  {
   struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
  
 + if (regulator_enable(imxpd-disp_reg))
 + dev_err(imxpd-dev, Failed to enable regulator.\n);
 +
   imx_drm_panel_format(encoder, imxpd-interface_pix_fmt);
  }
  
 @@ -170,6 +175,10 @@ static void imx_pd_encoder_mode_set(struct drm_encoder 
 *encoder,
  
  static void imx_pd_encoder_disable(struct drm_encoder *encoder)
  {
 + struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
 +
 + if (regulator_disable(imxpd-disp_reg))
 + dev_err(imxpd-dev, Failed to disable regulator.\n);
  }
  
  static struct drm_connector_funcs imx_pd_connector_funcs = {
 @@ -267,6 +276,10 @@ static int imx_pd_bind(struct device *dev, struct device 
 *master, void *data)
   if (ret)
   return ret;
  
 + imxpd-disp_reg = devm_regulator_get(dev, display);
 + if (IS_ERR(imxpd-disp_reg))
 + return PTR_ERR(imxpd-disp_reg);
 +
   dev_set_drvdata(dev, imxpd);
  
   return 0;


___
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel


Re: [PATCH v9][ 6/8] staging: imx-drm: parallel display: add regulator support.

2014-03-06 Thread Alexander Shiyan
Четверг,  6 марта 2014, 17:29 +01:00 от Philipp Zabel p.za...@pengutronix.de:
 Hi Denis,
 
 Am Donnerstag, den 06.03.2014, 17:04 +0100 schrieb Denis Carikli:
  diff --git 
  a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt 
  b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
  index 2d24425..4dd7ce5 100644
  --- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
  +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
  @@ -28,6 +28,7 @@ Required properties:
   - compatible: Should be fsl,imx-parallel-display
   - crtc: the crtc this display is connected to, see below
   Optional properties:
  +- display-supply : phandle to the regulator device tree node if needed.
 
 I'd very much prefer to not do this here. I have submitted a patch to
 add drm_display support to this driver, so you can connect a drm_panel
 compatible driver as output. The simple-panel driver already supports
 supply regulator and backlight control.
...
  +   imxpd-disp_reg = devm_regulator_get(dev, display);
  +   if (IS_ERR(imxpd-disp_reg))
  +   return PTR_ERR(imxpd-disp_reg);

And here we can see that this regulator is not optional.

---
___
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel