Re: [Duplicity-team] Duplicity 0.8.21 Released

[Kenneth Loafman]

Hi,

Problem solved.  Finally managed to figure it out.  0.8.21.postN is a valid
release name.  After much fiddling around there is now a *one-time only*
post release called *0.8.21.post7* (yes, it took that much trial and
terror).  This has no changes other than to setup.py which have now been
backed out.  Post releases are a real PITA, but at least anyone upgrading
using pypi normally will upgrade to 0.8.21.  Note this only exists on pypi
and only because I needed to do a workaround to overcome their fascist
rules.  The instructions given previously will also give you what you want.

...Thanks,
...Ken


On Fri, Nov 12, 2021 at 9:32 AM Kenneth Loafman  wrote:

> Hi,
>
> I had a problem on PyPi in that I deleted version 0.8.21, intending to
> replace it.  PyPi does not allow you to reuse a name and in my process
> 0.8.22 was an impossible fix for many reasons.
>
> For now, use *pip3 install -U
> https://launchpad.net/duplicity/0.8-series/0.8.21/+download/duplicity-0.8.21.tar.gz
> *
>  since
> that's all that PyPi has anyway.
>
> Or do a one time *pip3 install -U --pre duplicity* which will pick up
> 0.8.22.dev2 (only minor changes).
>
> ...Thanks,
> ...Ken
>
>
> On Tue, Nov 9, 2021 at 11:36 AM Kenneth Loafman 
> wrote:
>
>> You can see the full details of the changes in GitLab
>>  and Launchpad
>>  milestone pages and
>> CHANGELOG
>> .
>>
>> There are multiple options both stable and latest:
>>
>>- Stable snap builds - “sudo snap install duplicity —classic"
>>- Latest snap builds - “sudo snap install duplicity —classic —edge"
>>- Stable pip3 builds - “sudo pip3 install duplicity"
>>- Latest pip3 builds - “sudo pip3 install --pre duplicity"
>>- Stable duplicity PPA -
>>
>> https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-release-git
>>
>> 
>>- Latest duplicity PPA -
>>
>> https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-develop-git
>>- Stable tarball install - https://launchpad.net/duplicity/+download
>>- Source - https://gitlab.com/duplicity/duplicity
>>
>> The pip3 stable install will be delayed until I resolve a problem on
>> pypi.  Use latest for now.
>>
>> *Note 1: UNINSTALL duplicity first if it was installed from a different
>> source.*
>> *Note 2: Launchpad PPAs contain builds for Bionic 18.04, Focal 20.04,
>> Hirsute 20.10, Impish 21.04, and Jammy 21.10.*
>> *Note 3: Xenial 16.04 works with Snap and Pip installs, but cannot be
>> built under Launchpad PPAs at the moment**.*
>>
>> ...Thanks,
>> ...Ken
>>
>>
___
Mailing list: https://launchpad.net/~duplicity-team
Post to : duplicity-team@lists.launchpad.net
Unsubscribe : https://launchpad.net/~duplicity-team
More help   : https://help.launchpad.net/ListHelp

Re: [Duplicity-team] Duplicity 0.8.21 Released

[Kenneth Loafman]

Hi,

I had a problem on PyPi in that I deleted version 0.8.21, intending to
replace it.  PyPi does not allow you to reuse a name and in my process
0.8.22 was an impossible fix for many reasons.

For now, use *pip3 install -U
https://launchpad.net/duplicity/0.8-series/0.8.21/+download/duplicity-0.8.21.tar.gz
*
since
that's all that PyPi has anyway.

Or do a one time *pip3 install -U --pre duplicity* which will pick up
0.8.22.dev2 (only minor changes).

...Thanks,
...Ken


On Tue, Nov 9, 2021 at 11:36 AM Kenneth Loafman  wrote:

> You can see the full details of the changes in GitLab
>  and Launchpad
>  milestone pages and
> CHANGELOG
> .
>
> There are multiple options both stable and latest:
>
>- Stable snap builds - “sudo snap install duplicity —classic"
>- Latest snap builds - “sudo snap install duplicity —classic —edge"
>- Stable pip3 builds - “sudo pip3 install duplicity"
>- Latest pip3 builds - “sudo pip3 install --pre duplicity"
>- Stable duplicity PPA -
>
> https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-release-git
>
> 
>- Latest duplicity PPA -
>
> https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-develop-git
>- Stable tarball install - https://launchpad.net/duplicity/+download
>- Source - https://gitlab.com/duplicity/duplicity
>
> The pip3 stable install will be delayed until I resolve a problem on
> pypi.  Use latest for now.
>
> *Note 1: UNINSTALL duplicity first if it was installed from a different
> source.*
> *Note 2: Launchpad PPAs contain builds for Bionic 18.04, Focal 20.04,
> Hirsute 20.10, Impish 21.04, and Jammy 21.10.*
> *Note 3: Xenial 16.04 works with Snap and Pip installs, but cannot be
> built under Launchpad PPAs at the moment**.*
>
> ...Thanks,
> ...Ken
>
>
___
Mailing list: https://launchpad.net/~duplicity-team
Post to : duplicity-team@lists.launchpad.net
Unsubscribe : https://launchpad.net/~duplicity-team
More help   : https://help.launchpad.net/ListHelp

[Duplicity-team] Duplicity 0.8.21 Released

[Kenneth Loafman]

You can see the full details of the changes in GitLab
 and Launchpad
 milestone pages and
CHANGELOG
.

There are multiple options both stable and latest:

   - Stable snap builds - “sudo snap install duplicity —classic"
   - Latest snap builds - “sudo snap install duplicity —classic —edge"
   - Stable pip3 builds - “sudo pip3 install duplicity"
   - Latest pip3 builds - “sudo pip3 install --pre duplicity"
   - Stable duplicity PPA -
   
https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-release-git
   

   - Latest duplicity PPA -
   
https://code.launchpad.net/~duplicity-team/+archive/ubuntu/duplicity-develop-git
   - Stable tarball install - https://launchpad.net/duplicity/+download
   - Source - https://gitlab.com/duplicity/duplicity

The pip3 stable install will be delayed until I resolve a problem on pypi.
Use latest for now.

*Note 1: UNINSTALL duplicity first if it was installed from a different
source.*
*Note 2: Launchpad PPAs contain builds for Bionic 18.04, Focal 20.04,
Hirsute 20.10, Impish 21.04, and Jammy 21.10.*
*Note 3: Xenial 16.04 works with Snap and Pip installs, but cannot be built
under Launchpad PPAs at the moment**.*

...Thanks,
...Ken
___
Mailing list: https://launchpad.net/~duplicity-team
Post to : duplicity-team@lists.launchpad.net
Unsubscribe : https://launchpad.net/~duplicity-team
More help   : https://help.launchpad.net/ListHelp