Re: [Dx4win] Radio control with no serial port question

[Jesse Wall]

Todd,

You need to load the device drivers so it shows up as a com port. Then, you can 
double click it, go to the Port Settings tab, click advanced and set the com 
port you want to use.

Regards,
Jesse, KA8YYZ

--- tstr...@charter.net wrote:

From: "Todd" 
To: 
Subject: Re: [Dx4win] Radio control with no serial port question
Date: Tue, 29 Mar 2016 21:20:26 -0400

It shows up under system devices as an unknown device (didn’t know if I had 
some device driver for the radio on the old box I’m forgetting about?) as I can 
see it come and go if I plug/unplug the USB cable but doesn’t show up as a port 
option.  Is there a device driver I need installed for the radio (Yaesu FT920) 
that I’m totally forgetting about or something like that?  I feel stupid 
because I obviously had it working on the old computer but can’t get this one 
going. Both were/are running Vista but that’s a whole other story 

Howard – not radio settings, they are all fine (baud rate, etc.) it’s a com 
port connectivity issue.

Todd & Astrid
Astrid's Embroidery & Garment Printing
269-795-7297
www.astridsembroidery.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Brother DK-1209 Label Problem

[Jesse Wall]

Hello Eric,

I don't own that printer, but possible there is a margin setting in the printer 
driver. Check the printer properties.

73,
Jesse, KA8YYZ

--- ericrosenberg...@gmail.com wrote:

From: Eric Rosenberg 
To: DX4Win Reflector 
Subject: [Dx4win] Brother DK-1209 Label Problem
Date: Wed, 30 Dec 2015 23:21:38 -0500

I've started using a Brother one-label-at-a-time label maker, the 
QL-550, with DX4Win v8.05 It's a very nice printer, and much easier to 
deal with than a conventional printer and sheets of labels.

I first started out using DK-1201 labels, which are 1.1" x 3.5" (28.9mm 
x 90.3mm) which were fine other than that each label had to be trimmed 
as they are wider than the space on my card.

I then tried the DK-1209 label, which is 1.1" x 2.4" (28.9mm x 62mm). 
For some reason I cannot explain or figure out how to cure, the 
printable space in height is less than with the 1201 label, which is the 
same size.

I've tried adjusting all of the tweakable parameters in DX4Win, but 
can't expand that space.

Can anyone help?

Thanks, 73 & Happy New Year!

Eric W3DQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QSL Manager Window

[Jesse Wall]

Ron,

Close your log. Open the QSL Manager database, and make an entry with no 
manager. Use a date prior to your QSO. After that, it should show up without 
the manager.

73,
Jesse, KA8YYZ

--- wb3...@verizon.net wrote:

From: WB3AAL wb3...@verizon.net
To: dx4win@mailman.qth.net
Subject: [Dx4win] QSL Manager Window
Date: Wed, 06 Aug 2014 14:46:47 -0400

Hello,

 I have been doing some work in my log version 8.05.

I worked a DX station several times. The first three contact that I made
with the station had a QSL manager, now he does not. But the QSL manager
call sign keeps popping up in the window.

Any way of correcting this small issue? I am sure I am over looking
something.

73
Ron Polityka
WB3AAL


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] PSK Question

[Jesse Wall]

Also, in the same tab, set DX Alerts to None.

73, Jesse, KA8YYZ

--- sv1...@otenet.gr wrote:

From: Kostas SV1DPI sv1...@otenet.gr
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] PSK Question
Date: Tue, 27 May 2014 22:34:51 +0300

in filepreferences go to Packet1 tab.
In Audio/Voice box, select system beep.
This goes to the internal speaker which used to be in the old computers 
and not in the soundcard.

73 Kostas SV1DPI

Στις 27/5/2014 8:45 μμ, ο/η Carol Richards έγραψε:
 I am using DX4WIN, ver. 6.02. For PSK I use a Rig Blaster Advantage 
 with a built in USB card. In the preferences drop-down, there doesn't 
 seem to be anyway to turn off the audio announcements. Therefore I 
 need to set the computer speakers to mute. Unfortunately to operate 
 PSK, I need audio and as such, I need to turn the computer audio 
 setting back on. Needless to say, when I am operating PSK and there is 
 a call out, the audio call out goes out over the air. How do I get 
 around this problem?


 Carol
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Starting WAS Over

[Jesse Wall]

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Test

[Jesse Wall]

All,

Having issues posting. This is a test.

Thanks,
Jesse

_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Starting WAS Over

[Jesse Wall]

Hello all,
Since I moved, I have to start Worked All States over, due to the 50 mile rule. 
So, I went in the awards preferences and changed the start date for all WAS 
awards to the date I moved. However, when I pull up a summary, I get 
infromation from the start of my log.
Why does it not calculate from the new start date?
Thanks,
Jesse, KA8YYZ 


_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Starting WAS Over

[Jesse Wall]

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] LoTW Upload

[Jesse Wall]

Hugh,
After you do an upload, go to Find Call and search your call? This option says 
it is the callsign's last upload. I haven't tested this myself. I'm waiting 
until the backlog clears before I do an upload again.

73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net wrote:

From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 104, Issue 11
Date: Sat, 08 Dec 2012 12:00:02 -0500

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of DX4WIN digest...


Today's Topics:

   1. Re: LoTW file upload (ON4AOI)
   2. Re: How to find what new countries I worked (David Kozinn, K2DBK)


--

Message: 1
Date: Sat, 8 Dec 2012 10:25:58 +0100
From: ON4AOI on4...@skynet.be
To: 'Hugh Phillips K7XM' jacsh...@mho.com
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] LoTW file upload
Message-ID: 002401cdd526$084d4e50$18e7eaf0$@be
Content-Type: text/plain;   charset=us-ascii

Hugh
It only shows up when you have uploaded those files.
No trace afterwards, if b4 28/11/2012 you probably need to upload
Again due the BUG they fixed late evening on 28 November


Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Hugh Phillips K7XM
Verzonden: zaterdag 8 december 2012 1:56
Aan: DX4WIN@mailman.qth.net
Onderwerp: [Dx4win] LoTW file upload

I have uploaded two TQ8 files to LoTW recently.
Shouldn't those show up somewhere even though they have not been processed
by LoTW ?
I can't seem to find them, unless I'm not looking in the right place
Using Dx4Win v8.05...

73
Hugh
K7XM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--

Message: 2
Date: Sat, 08 Dec 2012 11:44:57 -0500
From: David Kozinn, K2DBK k2...@arrl.net
To: Jim Reisert AD1C jjreis...@alum.mit.edu
Cc: DX4WIN Reflector dx4win@mailman.qth.net
Subject: Re: [Dx4win] How to find what new countries I worked
Message-ID: 50c36e89.7040...@arrl.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Well for me, the clublog feature was exactly what I wanted in this case, 
but I can see where there might be other variations as well. None of the 
examples that I can think of (including the one I started this thread 
with) are must have things, but rather fall into the category of 
interesting things you can find out.

On 12/7/2012 8:08 PM, Jim Reisert AD1C wrote:
 On Tue, Dec 4, 2012 at 8:10 PM, David Kozinn, K2DBK k2...@arrl.net wrote:

 Actually, that is  the perfect solution, and one I'd forgotten about. (I've
 been a member of Club Log for a long, long time.) That actually gives me the
 exact information that I was looking for. Thanks for mentioning it.
 This works for all-time new ones, but not, for example, if I want to
 see if I worked any new countries during CQWW CW for the CQ DX
 Marathon in 2012. A while back, I wrote a quick-and-dirty program to
 display the first time a new country was worked, given an ADIF file as
 input.  It was never meant for release, but I could add filtering to
 it.  That way you could export whatever portion of your log you cared
 about (to ADIF) and run the report against that.

 But it would be better if Paul could build this into the program.  If
 I recall, KD7P/N7XR's logging program (whose name escapes me at the
 moment) was able to do this, back in the mid-1990's!

 - Jim

 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


-- 
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk



--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 104, Issue 11
***




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] LoTW Upload

[Jesse Wall]

Hugh,
After you do an upload, go to Find Call and search your call? This option says 
it is the callsign's last upload. I haven't tested this myself. I'm waiting 
until the backlog clears before I do an upload again.

73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net wrote:

From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 104, Issue 11
Date: Sat, 08 Dec 2012 12:00:02 -0500

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of DX4WIN digest...


Today's Topics:

   1. Re: LoTW file upload (ON4AOI)
   2. Re: How to find what new countries I worked (David Kozinn, K2DBK)


--

Message: 1
Date: Sat, 8 Dec 2012 10:25:58 +0100
From: ON4AOI on4...@skynet.be
To: 'Hugh Phillips K7XM' jacsh...@mho.com
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] LoTW file upload
Message-ID: 002401cdd526$084d4e50$18e7eaf0$@be
Content-Type: text/plain;   charset=us-ascii

Hugh
It only shows up when you have uploaded those files.
No trace afterwards, if b4 28/11/2012 you probably need to upload
Again due the BUG they fixed late evening on 28 November


Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Hugh Phillips K7XM
Verzonden: zaterdag 8 december 2012 1:56
Aan: DX4WIN@mailman.qth.net
Onderwerp: [Dx4win] LoTW file upload

I have uploaded two TQ8 files to LoTW recently.
Shouldn't those show up somewhere even though they have not been processed
by LoTW ?
I can't seem to find them, unless I'm not looking in the right place
Using Dx4Win v8.05...

73
Hugh
K7XM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--

Message: 2
Date: Sat, 08 Dec 2012 11:44:57 -0500
From: David Kozinn, K2DBK k2...@arrl.net
To: Jim Reisert AD1C jjreis...@alum.mit.edu
Cc: DX4WIN Reflector dx4win@mailman.qth.net
Subject: Re: [Dx4win] How to find what new countries I worked
Message-ID: 50c36e89.7040...@arrl.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Well for me, the clublog feature was exactly what I wanted in this case, 
but I can see where there might be other variations as well. None of the 
examples that I can think of (including the one I started this thread 
with) are must have things, but rather fall into the category of 
interesting things you can find out.

On 12/7/2012 8:08 PM, Jim Reisert AD1C wrote:
 On Tue, Dec 4, 2012 at 8:10 PM, David Kozinn, K2DBK k2...@arrl.net wrote:

 Actually, that is  the perfect solution, and one I'd forgotten about. (I've
 been a member of Club Log for a long, long time.) That actually gives me the
 exact information that I was looking for. Thanks for mentioning it.
 This works for all-time new ones, but not, for example, if I want to
 see if I worked any new countries during CQWW CW for the CQ DX
 Marathon in 2012. A while back, I wrote a quick-and-dirty program to
 display the first time a new country was worked, given an ADIF file as
 input.  It was never meant for release, but I could add filtering to
 it.  That way you could export whatever portion of your log you cared
 about (to ADIF) and run the report against that.

 But it would be better if Paul could build this into the program.  If
 I recall, KD7P/N7XR's logging program (whose name escapes me at the
 moment) was able to do this, back in the mid-1990's!

 - Jim

 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


-- 
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk



--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 104, Issue 11
***




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] LoTW Upload

[Jesse Wall]

Hugh,
After you do an upload, go to Find Call and search your call? This option says 
it is the callsign's last upload. I haven't tested this myself. I'm waiting 
until the backlog clears before I do an upload again.

73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net wrote:

From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 104, Issue 11
Date: Sat, 08 Dec 2012 12:00:02 -0500

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of DX4WIN digest...


Today's Topics:

   1. Re: LoTW file upload (ON4AOI)
   2. Re: How to find what new countries I worked (David Kozinn, K2DBK)


--

Message: 1
Date: Sat, 8 Dec 2012 10:25:58 +0100
From: ON4AOI on4...@skynet.be
To: 'Hugh Phillips K7XM' jacsh...@mho.com
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] LoTW file upload
Message-ID: 002401cdd526$084d4e50$18e7eaf0$@be
Content-Type: text/plain;   charset=us-ascii

Hugh
It only shows up when you have uploaded those files.
No trace afterwards, if b4 28/11/2012 you probably need to upload
Again due the BUG they fixed late evening on 28 November


Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Hugh Phillips K7XM
Verzonden: zaterdag 8 december 2012 1:56
Aan: DX4WIN@mailman.qth.net
Onderwerp: [Dx4win] LoTW file upload

I have uploaded two TQ8 files to LoTW recently.
Shouldn't those show up somewhere even though they have not been processed
by LoTW ?
I can't seem to find them, unless I'm not looking in the right place
Using Dx4Win v8.05...

73
Hugh
K7XM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--

Message: 2
Date: Sat, 08 Dec 2012 11:44:57 -0500
From: David Kozinn, K2DBK k2...@arrl.net
To: Jim Reisert AD1C jjreis...@alum.mit.edu
Cc: DX4WIN Reflector dx4win@mailman.qth.net
Subject: Re: [Dx4win] How to find what new countries I worked
Message-ID: 50c36e89.7040...@arrl.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Well for me, the clublog feature was exactly what I wanted in this case, 
but I can see where there might be other variations as well. None of the 
examples that I can think of (including the one I started this thread 
with) are must have things, but rather fall into the category of 
interesting things you can find out.

On 12/7/2012 8:08 PM, Jim Reisert AD1C wrote:
 On Tue, Dec 4, 2012 at 8:10 PM, David Kozinn, K2DBK k2...@arrl.net wrote:

 Actually, that is  the perfect solution, and one I'd forgotten about. (I've
 been a member of Club Log for a long, long time.) That actually gives me the
 exact information that I was looking for. Thanks for mentioning it.
 This works for all-time new ones, but not, for example, if I want to
 see if I worked any new countries during CQWW CW for the CQ DX
 Marathon in 2012. A while back, I wrote a quick-and-dirty program to
 display the first time a new country was worked, given an ADIF file as
 input.  It was never meant for release, but I could add filtering to
 it.  That way you could export whatever portion of your log you cared
 about (to ADIF) and run the report against that.

 But it would be better if Paul could build this into the program.  If
 I recall, KD7P/N7XR's logging program (whose name escapes me at the
 moment) was able to do this, back in the mid-1990's!

 - Jim

 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


-- 
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk



--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 104, Issue 11
***




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] No telnet connection

[Jesse Wall]

Tom,

Check in Preferences, on the Packet1 tab, that the Cluster interface Type is 
set to regular and the COM Port is set to TCP/IP.

73,
Jesse
KA8YYZ


Message: 1
Date: Thu, 2 Aug 2012 22:59:50 -0700 (PDT)
From: Tom Horton k5...@sbcglobal.net
Subject: [Dx4win] No telnet connection
To: DX4WIN Dx4win@mailman.qth.net
Message-ID:
1343973590.34133.yahoomailclas...@web83107.mail.mud.yahoo.com
Content-Type: text/plain; charset=us-ascii

I have had to totally reload all the programs on my computer. In doing so, I 
cannot seem to get the Telnet cluster going again. The window comes up and if I 
try to connect, I don't get the possible links to connect to any more.
Suggestions anyone?
Tom K5IID

Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery..
-- Winston Churchill

Democracy depends on well-informed voters; absent that, it is all mud flowing 
down hill.
--Charles Harpole

Luck is a dividend of sweat. The more you sweat, the luckier you get.

If you don't like my signature? Too Bad! But I will use it because it is what I 
believe. 

K5IID Tom Horton Hillsboro, TX
E sorter for ARRL W5 bureau
Same call for 55 years!

--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 100, Issue 2
**




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and Windows 7

[Jesse Wall]

Steve,

  I have DX4WIN version 8.05 installed on both Win7-64 bit and 32-bit. Runs 
with no problem. If you use the LPT port for CW keying you have to install a 
driver (No experience her, as I use my keyer and paddle).

  Install was no problem in the default folder. If you try to install in the 
Program Files or Program Files (x86) folder, you may run into some issues. 
Windows 7 denies browsing access to these folders by default and it causes 
problems with some apps, so I really recommend you install to C:\dx4winxxx.

73, 

Jesse, KA8YYZ

--- dx4win-requ...@mailman.qth.net wrote:

From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 93, Issue 27
Date: Wed, 25 Jan 2012 12:06:06 -0500

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than Re: Contents of DX4WIN digest...


Today's Topics:

   1. DX4WIN  and  Windows 7 (Steve GW4BLE)
   2. Re: DX4WIN  and  Windows 7 (S.K.)
   3. Re: DX4WIN  and  Windows 7 (Kostas Stamatis)
   4. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)
   5. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)
   6. Re: DX4WIN and Windows 7 (Kurt Zimmerman)
   7. Re: DX4WIN  and  Windows 7 (Mel)
   8. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)


--

Message: 1
Date: Tue, 24 Jan 2012 18:24:40 -
From: Steve GW4BLE steve.gw4...@btconnect.com
Subject: [Dx4win] DX4WIN  and  Windows 7
To: Dx4win@mailman.qth.net
Message-ID: 000101ccdac5$71b21350$551639f0$@gw4...@btconnect.com
Content-Type: text/plain;   charset=us-ascii

My old faithful PC running XP is getting a bit long in the tooth, so I have
a new W7 machine on order.

This may well have been covered off on previous posts, I admit to not yet
having done a complete search, but what's the current thinking on pit falls
to be aware of when doing a new installation ?

(this, or similar, will be on the microHAM   Writelog reflectors also, so
apologies if you read  this more than  once)


Steve
GW4BLE



--

Message: 2
Date: Tue, 24 Jan 2012 10:24:35 -0800 (PST)
From: S.K. k...@yahoo.com
Subject: Re: [Dx4win] DX4WIN  and  Windows 7
To: Steve GW4BLE steve.gw4...@btconnect.com,
Dx4win@mailman.qth.net Dx4win@mailman.qth.net
Message-ID:
1327429475.18296.yahoomail...@web130102.mail.mud.yahoo.com
Content-Type: text/plain; charset=iso-8859-1

This is timely... I have a Windows 7 64-bit machine on order as well, and have 
the same questions.


Sean Kutzko
Amateur Radio KX9X



 From: Steve GW4BLE steve.gw4...@btconnect.com
To: Dx4win@mailman.qth.net 
Sent: Tuesday, January 24, 2012 1:24 PM
Subject: [Dx4win] DX4WIN  and  Windows 7
 
My old faithful PC running XP is getting a bit long in the tooth, so I have
a new W7 machine on order.

This may well have been covered off on previous posts, I admit to not yet
having done a complete search, but what's the current thinking on pit falls
to be aware of when doing a new installation ?

(this, or similar, will be on the microHAM?  Writelog reflectors also, so
apologies if you read? this more than? once)


Steve
GW4BLE

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

--

Message: 3
Date: Tue, 24 Jan 2012 22:06:31 +0200
From: Kostas Stamatis sv1...@otenet.gr
Subject: Re: [Dx4win] DX4WIN  and  Windows 7
To: REFLECTOR dx4win dx4win@mailman.qth.net
Message-ID: 333ADE2DB4F44CF1A3D303850747F572@sv1dpimain
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=original

GL with the new computers.
I prefer XP for ham use but i use win 7 in my laptop which occasionaly use 
for ham radio. Install dx4win outside programs directory. MMTTY also. 
Generally ham programs is good to install outside programs directory. This 
is probably because our programs usually update themselves. Writelog goes to 
its default directory but is has solved many problems it had at the start. 
Microham router works ok but you can not manage soundcard via router 
anymore. Windows keeps this function for them.
Finally i think that win7 are good, maybe better than xp for general use but 
not for ham radio... Ofcourse this is my opinion only
73 Kostas sv1dpi

- Original Message - 
From: S.K. k...@yahoo.com
To: Steve GW4BLE steve.gw4...@btconnect.com; 

Re: [Dx4win] QRZ Error : Database not found

[Jesse Wall]

Hello Toshimi,

  I have not tried the QRZ database installed locally, but you may want to try 
installing it in another location besides Program Files x86). All of the 
Program Files folders in Windows 7 have the browse option set in the security 
tab to EVERYONE - DENY. This may be your problem. In Windows DENY access 
overrides ALLOWED permissions. I have had this issue with a couple of programs.

  Try installing to something like C:\QRZDB

 Please let all of us know if this worked or not.

Good luck,
Jesse
KA8YYZ

--- dx4win-requ...@mailman.qth.net wrote:

Message: 3
Date: Thu, 1 Dec 2011 09:05:01 +0900
From: Toshimi Horie je2...@gmail.com
Subject: [Dx4win] QRZ Error : Database not found
To: dx4win@mailman.qth.net dx4win@mailman.qth.net
Message-ID:
cadu7z+yh0fcbvgavcxset_qf5cyns5xo6qjko9yyzgyyekb...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1

Hi all. I am JE2UFF.

I checked archives this ref. Since it dose not solve, I would like to ask
you. A problem is QRZ Error : Is is Database not found. Now I used QRZ
Database install to HDD drive.
It can used stand alone, no problem. However, I can used it with dx4win
that problem happen.
I set up EXT Data tab for install drive. But not found. If choose CD-ROM
drive that no problem. I can used it with dx4win.

Why can not used HDD drive.

I tried two kind of types.
C:?Program Files(86)?QRZ Ham Radio?callbk
C:?Program Files(86)?QRZ Ham Radio?callbk?

Each path as same as QRZ Error.

Please advice for me.

My condition as follows

Windws7 64bit

Best regards

de JE2UFF




_
Netscape.  Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html