Re: [Dx4win] JT44 mode issue!
Well, I went to Ham Radio Deluxe. Not a freebee. A lot of folks seem to like the DX Lab suite. ___ 73, Jim - N4ST -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ROBERT DEGRIPPO Sent: Wednesday, January 20, 2016 06:07 To: Dx4win@mailman.qth.net Subject: Re: [Dx4win] JT44 mode issue! Any suggestions on a REPLACEMENT for DX4WIN. What if any of you dx4win users still here what did you go to? Bob Sent from my iPad > On Jan 20, 2016, at 3:59 AM, ON4AOI <on4...@skynet.be> wrote: > > Hi Ernie > > > I think something is set wrong in AWARDS Probably digital is not > marked Works here in all version that I can test. > > Guy ON4AOI-OT7K > > -Oorspronkelijk bericht- > Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Ernie Walls > Verzonden: woensdag 20 januari 2016 9:25 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] JT44 mode issue! > > I still use DX4Win, despite the authors complete lack of interest for > the past five or so years. > > But the problems I don't like with the program continue to add, and > have just about reached the limit of my patience. > > For instance, there is no way to easily maintain existing name and QTH > information in the 'Notes for this QSO' field when there is a change > in either/both the callsign owners name or, much more commonly, his > QTH. Not life threatening but, for me, irritating. Yes, you can use > the 'Notes for this call' box, but that's messy, to say the least. > > Then, I found out (as we all did) that DX4Win will not record a proper > signal report for JT type modes - so I make do with manually recording > it in the 'Notes for this QSO' box, and handwriting the report in the > body of my QSL card - I have a 'Comment' line on my card, so it doesn't look 'too' bad! > > Then, I found out that I could not correctly record my JT9 QSOs - > again a workaround, I make do with calling them 'JT44' QSOs, for the > sole purpose of 'housing' them within DX4Win. But the QSL card was now > looking distinctly messy before my 'manual intervention' corrects the > mess. Yes, I could use an external label printing program - but why should I have to? > > Today, quite by accident (in fact, absolutely by accident) I found > that, in recording 'JT9' QSOs as 'JT44' QSOs, that a JT44 QSO has no > effect (again, I repeat, NO effect) on my DXCC totals - it does not > update them. Unless someone can point out the error of my ways - in > which case I will gladly stand corrected. So, I temporarily recorded > all JT9 (JT44) QSOs as RTTY QSOs, and found two band/mode fills. > Remember, when you are a keen DXer, small fish are sweet! > > The bitterness/frustration that you can possibly note in my writing is > because a wonderful program, that I still fundamentally really like, > is becoming a bit of a laughing stock among my contemporary VK mates, > all of who have urged me to 'move on' to a more modern logger, or at > least one that is still supported. Because NONE of them have these sorts of problems. > > In fact, it is wasn't for the sensational efforts of Jim AD1C over the > past five years and the helpful hints to all over a long period from > Guy ON4AOI, I fear DX4Win would have already fallen over - 'cause it > is patently clear that Paul does not give a damn. > > So, two questions - > > (1) Can anyone verify that recording a QSO in 'JT44' mode doesn't > update DXCC totals - or, if it does, tell me where I went wrong, and > > (2) Does anyone actually know if Paul is still alive, and could ask > him what his intentions for DX4Win are. If it's to take no further > effective interest, just tell us. We could all move on. That's the easy bit. > > Sorry for the 'cry' - but, by God, it's getting so frustrating. > > Ernie Walls VK3FM > vk...@wallsy.com.au<mailto:vk...@wallsy.com.au> > Mobile 0418 301 483 > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listin
Re: [Dx4win] Win 7 64 or 32
Tom, I have been running DX4WIN with Win 7 64-bit for years. I have not had any problems. I think there was an LPT driver (?) that had to be installed to get the hardware CW keying working, but it has been so long ago that I don't remember the details. _ 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Tom Magarelli Sent: Friday, April 04, 2014 11:07 To: DX4WIN@mailman.qth.net Subject: [Dx4win] Win 7 64 or 32 Greetings I am currently in the process of upgrading from XP to Win 7 my question is will DX4WIN work under the 64 bit system ? I want to install the correct type that most Ham software will run. Thanks for your thoughts or personal experience Tom - WA2PNI __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] connection from radio to computer?
Folks have had the most success with an FTDI chipset USB-to-RS232 converters as opposed to the Prolific chipset converters. I have had good luck with Valley Enterprises and they come with a 10-foot cable. http://www.amazon.com/Valley-Enterprises-Serial-Adapter-Chipset/dp/B003N9TYW 0/ref=sr_1_2?ie=UTF8qid=1378515070sr=8-2keywords=Valley+FTDI 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w1ioo Sent: Friday, September 06, 2013 20:04 To: DX4WIN@mailman.qth.net Subject: [Dx4win] connection from radio to computer? Hi All I am replacing my desktop with a win 7 laptop. The radio is a Kenwood TS 950sdx. The interface is a Kenwood IF-232C to the old serial port on the desktop running XP. Is there a recommended dongle to connect the serial to USB port on laptop or is this not the way to go? I am running DX4WIN v8. Tnx Wally W1IOO __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] JT65 signal reports
John, I use WSJTX and JT-Alertx when working JT65a and JT9-1. There is a configuration option to write the mode and signal reports to the comment field. I am using a different logging program and this works fine with it and then I can import into DX4WIN the info in the comment field. You might see if it possible to write the ADIF file directly with the mode and signal report in the comment field which could then be imported to DX4WIN. Never tried it , so don't know for sure. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John Balsillie Sent: Tuesday, September 03, 2013 16:17 To: DX4WIN@mailman.qth.net Subject: [Dx4win] JT65 signal reports I see this has been discussed before by browsing the Archives but didn't find a solution. I'm running version 8.04 and maintaining a group log with imports from various other logging programmes which include JT65 QSOS with negative signal reports. However DX4Win wont accept a negative report and records a default 599. I need to be able to record a negative report in the correct field for QSLing Has there been a fix or upgrade I missed? John ZL1ALZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] USB to parallel port
Another vote for RT Systems. Expensive, but fewer headaches. Some foks have had success with less expensive converters based on the Prolific chipset, but some counterfeit chips along with a plethora of drivers and driver updates make these iffy in my book. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ALAN ZACK Sent: Monday, August 19, 2013 02:06 To: 'David Strout'; 'DX4WIN Reflector' Subject: Re: [Dx4win] USB to parallel port I have had good results with both the MFJ and RT Systems convertors, both available thru HRO and AES. I also have a couple from RIGBlaster (West Mountain Radio). They will not work with my FT-2000 to a PC or laptop. Alan, K7ACZ -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of David Strout Sent: Thursday, August 15, 2013 2:12 PM To: DX4WIN Reflector Subject: [Dx4win] USB to parallel port Need a suggestion for best USB to parallel port converter. Switching to WIN7 and want parallel port keying with DX4WIN. Thanks, Dave, W2YC __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] USB to parallel port
Don't know about USB to parallel, but I use an FTDI chipset USB to RS232 converter and then a photo-coupler interface to key my rigs and it works fine with DX4WIN. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of David Strout Sent: Thursday, August 15, 2013 17:12 To: DX4WIN Reflector Subject: [Dx4win] USB to parallel port Need a suggestion for best USB to parallel port converter. Switching to WIN7 and want parallel port keying with DX4WIN. Thanks, Dave, W2YC __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXLab
Yeah, I have 4000+ digital QSOs logged in DX4WIN where the mode and signal reports are stored in the comment field, because they are not compatible with the DX4WIN format. There are a few conveniences, simplicity and resistance to change that keep me using DX4WIN. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dick Flanagan Sent: Saturday, August 03, 2013 01:03 To: dx4win@mailman.qth.net Subject: Re: [Dx4win] DXLab SNIP My personal problem is that gradually some of my logging wants are becoming needs and at some point those needs will overcome my loyalty to Paul and DX4WIN. I don't need a Swiss Army Knife like DXLab, but I could use a few more sharp blades in my old reliable Boy Scout knife. Dick -- Dick Flanagan K7VC d...@k7vc.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Wish list
Alan, No debate that HRD has a learning curve, because it is very feature rich. For the particular issue you raise, looking up a call, one merely right clicks on the decoded call and select call and the window on the left will be auto populated with QRZ data such as name, QTH and locator grid, along with the current solar indices, and a list of bands if you have worked this station before. You can do this even before you make the contact or log the QSO. If you log the QSO, then from the logbook you can click QRZ and all of the gory details such as QSL route, mailing address, operator age, etc. will be filled in. I have used DX4WIN for quite a few years, but have been riding the fence for the last four, with most of my operating/contesting being done with HRD. HRD is OK for the casual contester, but it is certainly not top tier for that purpose. I primarily migrated to HRD because of the broad support of digital modes that are built in. 73, Jim - N4ST -Original Message- From: ALAN ZACK [mailto:k7...@cox.net] Sent: Thursday, August 01, 2013 15:00 To: 'Jim - N4ST'; 'Dx4win' Subject: RE: [Dx4win] Wish list I looked at HRD at the Visalia Intl DX Convention, even got a sample trial CD. I was looking at a way to use RTTY and digital modes directly from HRD where you could read what was being sent right within HRD and then send your reply. But it seems really complicated. He was using 2 monitors full of info. It would seem the learning curve would be big. When I asked how do you do a lookup of a station that you have just logged or are presently in QSO with it seemed like a difficult procedure on HRD whereas with DX4WIN you just have to have the CALLSIGN/MGR LOOKUP window (F3) open and click on the guys callsign and it takes you to his QRZ.COM lookup (or Buckmaster if you have it so programmed). Very simple. I'm not sure but is HRD both a contesting and a general logging program? I am now using DX4WIN as my general logger and to track awards (DXCC, IOTA, WPX) and printing QSL labels and N1MM as my contest logger. Jim has a FB conversion program to convert a contest ADIF file to a DX4WIN.DXQ file to import to DX4WIN. I just used it again after last weekend's IOTA contest and DX4WIN now shows I logged a few new IOTA's. Alan, K7ACZ -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim - N4ST Sent: Monday, July 29, 2013 9:32 PM To: 'Dx4win' Subject: Re: [Dx4win] Wish list I like the way HRD handles new modes. It has a user editable file that can be updated as needed and can be mapped to a current mode if required for uploading to eQSL or LoTW. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jay Hainline Sent: Monday, July 29, 2013 16:31 To: Dx4win Subject: Re: [Dx4win] Wish list DX4WIN is still lagging way behind on keeping up with the newer digital modes and the signal reports used. Very poor when it comes to logging JT65-HF and the signal reports sent/received and it does not know about JT9 yet for example. :-( Jay Hainline KA9CFD Colchester, IL EN40om __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Wish list
I like the way HRD handles new modes. It has a user editable file that can be updated as needed and can be mapped to a current mode if required for uploading to eQSL or LoTW. 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jay Hainline Sent: Monday, July 29, 2013 16:31 To: Dx4win Subject: Re: [Dx4win] Wish list DX4WIN is still lagging way behind on keeping up with the newer digital modes and the signal reports used. Very poor when it comes to logging JT65-HF and the signal reports sent/received and it does not know about JT9 yet for example. :-( Jay Hainline KA9CFD Colchester, IL EN40om __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Is there a blacklist feature for Cluster spots?
Ha, W3LPL has such a great antenna farm, I can't hear his spots even when they are from MD. Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Barry Sent: Tuesday, July 23, 2013 12:51 To: dx4win@mailman.qth.net Subject: [Dx4win] Is there a blacklist feature for Cluster spots? I'd like to block W3LPL spots, since his Skimmer aggregator makes my geographic filter useless, pulling in spots from everywhere. Is this possible? Tnx, Barry W2UP __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] LoTW problem v 1.14.1
Another advantage of the newer TQSL programs is that they automatically handle some of the newer digital modes without having to just blindly map them to a generic DATA mode. _ Jim - N4ST __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Reading radio frequency issue
Are you running any other programs that talk to your rig? Do you get any error message about the com ports when you start DX4WIN? If you have the radio com port enabled, seems like you should get either a com port not available or a radio timeout error message. _ Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ron Stone Sent: Saturday, May 25, 2013 07:35 To: dx4win@mailman.qth.net Subject: [Dx4win] Reading radio frequency issue For some odd reason, DX4Win is not reading my radio frequency. I had no issues with this before. Now when switching bands, the band stays fixed in Dx4Win and frequency window is locked on a particular frequency. I did not have this issue previously...worked perfectly. Any thoughts on a fix? Thanks Ron Stone __ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] New TQSL not ready for prime time
I have been using TQSL 1.14 beta for weeks and have experienced no issues. YMMV 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Joseph Orsak Sent: Wednesday, May 22, 2013 20:33 To: dx4win@mailman.qth.net Subject: [Dx4win] New TQSL not ready for prime time I think I'll be waiting a good long while before trying the new Trusted QSL: May 21, 2013: From the Trusted QSL software development team - We announced last week that TQSL 1.14 would be available today (20 May 2013). However, three defects were reported last week: a.. Incorrect behavior when the user specifies the wrong ITU zone b.. Incorrect behavior when TQSL is invoked via command line without the -l switch present c.. Incorrect behavior when processing an ADIF file containing duplicate QSOs when TQSL is running on MacOS These defects have been corrected, but we must test the corrected version before publicly releasing it. Expect the public release within the next 10 days. http://www.arrl.org/logbook-of-the-world 73, Joe W4WN __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ARRL Diamond DXCC Challenge
Alan, The Diamond Challenge had a means to import an ADIF file to populate the spreadsheet, but when I tried it last Fall, it did not work properly. You might try it, to see if they got it fixed. If you can't find the link, maybe they gave up on the implementation and removed it. (?) It's a little painful, but I just did it by hand. Oddly, when you enter the data by hand, less information is required. The Challenge Award on your DXCC awards page is a completely separate award. It is based on your number of band-countries. You need 1000 points to qualify. You are getting close, keep DXing! :-) 73, Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ALAN ZACK Sent: Friday, February 22, 2013 03:31 To: 'Jim Reisert AD1C'; 'DX4WIN Reflector' Cc: Violette, Daniel R Subject: Re: [Dx4win] ARRL Diamond DXCC Challenge Diamond DXCC Challenge Award I kind of forgot about this until I was just looking around the ARRL Awards page. If I am reading correctly you can still submit your application anytime during 2013. I have found the Diamond DXCC Challenge Award excel worksheet scorecard on the ARRL website. I wonder if there is a quick way to import entries from DX4WIN to this excel scorecard as is done with the CQ DX Marathon conversion program. Has anyone found a simple way to get the info either to this score card or some sort of a list that can be submitted as the Diamond DXCC Challenge Award record sheet that is meant to be filled out manually? I am also confused with what is the challenge shown on my LOTW account status. On the bottom of the list in the awards column there is a challenge line that shows AWARDED: 947, TOTAL---/CURRENT 957. I don't know what this is. Is it related to the Diamond DXCC Challenge Award? TIA 73 Alan, K7ACZ -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim Reisert AD1C Sent: Monday, January 09, 2012 6:40 AM To: DX4WIN Reflector Subject: [Dx4win] ARRL Diamond DXCC Challenge Hi Folks, I have been on vacation since 12/22 and just returned home yesterday. It is going to take me a while to catch up on the E-mail I have missed, so please be patient. I understand that the ARRL has released a new DXCC award for 2012 called the Diamond DXCC: http://www.arrl.org/diamond-dxcc I have not read any of the reflector postings and have only skimmed the award rules. I assume people want to know how to track this award in DX4WIN. The easiest way to track this award in DX4WIN would be for me to create a custom award module listing all 231 Diamond DXCC entities. This is similar to what I did for the Fred Fish Memorial Award (6 meter VUCC). You will be able to set the custom award fields for the DXCC entities you work that qualify for the award, but there will be no spot filtering, etc. in DX4WIN. However, you could still generate a needed list report, for example. The ARRL also has an Excel spreadsheet you can download to track your progress. I could do something similar to what I do for CQ DX Marathon, i.e. a program to filter the QSOs from an ADIF file you export from DX4WIN, into a similarly-formatted spreadsheet file that you could copy/paste into the ARRL spreadsheet. Either of these two solutions will take me some time to implement. Please be patient and I'll try to have something before the end of the month. 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX LOTW versus DX4WIN
Yeah, I'm only averaging 1 or 2 per day being added to my WPX Mixed total. I did go in and manually add some just to see it work, but at 12 cents each, I will get my WPX 1000 endorsement sticker via eQSL instead of paying $120 to LoTW. I am a big big fan of LoTW, but not in this case. A while back you could buy credits for your QSLs from LoTW and if you bought in bulk, the price went down, now it's a flat 12 cents each. Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim Reisert AD1C Sent: Monday, July 16, 2012 01:57 To: dx4win@mailman.qth.net Subject: Re: [Dx4win] WPX LOTW versus DX4WIN My experience is similar. With over 100K QSOs, DX4WIN reports that I should have over 2000 WPX confirmed on LoTW alone. The LoTW web site shows 238. A week after I wrote this, and my total is up to a whopping 252 mixed prefixes. Wow. Something's going really slowly... 73 - Jim AD1C __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX LOTW versus DX4WIN
Patience grasshopper. WPX has just gone live on LoTW and it is crunching through the millions of records in the background. You can read that status message when you first log onto LoTW on the home page. ARRL will post when the WPX processing is up to date. I currently have more DXCC credits than WPX credits. Jim - N4ST -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Robert Garceau Sent: Saturday, July 07, 2012 08:15 To: dx4win@mailman.qth.net Subject: [Dx4win] WPX LOTW versus DX4WIN I must be missing something. I have uploaded over 73,000 QSO to LOTW and have 26,451 QSL records. However, I only have 184 mix WPX. For that many QSL records, I would have expected a ton of unique call signs. DX4WIN shows 750 WPX confirmed. Maybe I need to download the WPX file from LOTW and do a cross check? Bob Bob Garceau, W1EQ DXCC Honor Roll Triple Play Award #5 DXCC Challenge - 2019 band/countries Ex. K1YRP, USA-CA All Counties #342 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Getting a registration Key
Sent in my order last Saturday and had the registration key on Sunday. Less than 24 hours. Jim - N4ST -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bear Sent: Tuesday, February 04, 2003 17:09 To: Dx4win@mailman.qth.net Subject: [Dx4win] Getting a registration Key Has anyone been able to get their version of 6.0 registered yet? I used the online order form Friday night and haven't heard anything yet. I more worried that my order wasn't received properly than anything I know Steve said he was busy with the upgrades and I'm wondering if others here on the list have had any luck... Thanks Larry W0FLY --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
