Re: [Dx4win] County Report State After WY
Hi Mike, I started by making sure I got the same behavior as Bud was. I did. I looked in the QSO for data that looked "off". Didn't find anything. No 'DC" anywhere in the file. I sorted the file by the "state" field and sorted the file on "state". Then I removed all duplicates in the "State" field. There were 51 remaining records with the 51st one being 2 blanks. At this point, I decided to remove all records that didn't have a "state" present. Did this with an F8 with a "state" value of "!*" (all empty state fields). This confirmed (to me) that the issue was not an issue with the "state" value. At that point, I restored to the original file and, starting with AK, removed a state at a time; saved the log file, re-opened the log file and then looked for the gibberish. If I found it, I would go to the next state and repeat the scenario. Eventually I got to HI. When I removed "HI" QSOs, the gibberish went away! I restored the original log again. Now I removed, one county at a time, all QSOs that had a "county" present. This left 19 QSOs. I then started deleting each QSO, one at a time, until the gibberish went away. Removing the AH6AA QSO got rid of the gibberish! I thought I had seen in the past that there were AHxxx calls that were not US calls. Just for grins, I changed the call from AH6AA to KH6AA. The gibberish went away! I was done! :) All the above took several hours and probably over 100 SAVE and re-openings of the log! 73, Lee N7NU On Wed, Jun 2, 2021 at 6:52 AM Mike Cizek W0VTT wrote: > Thanks for posting this to the reflector, Lee. How did you figure out it > was AH6AA, who really is in KH6? > > > > > > 73, > > Mike Cizek W0VTT > > > > From: Lee Hallin > Sent: Wednesday, 2 June, 2021 08:49 > To: w...@arrl.net > Cc: DX4WIN Reflector ; Jim Reisert AD1C < > jjreis...@alum.mit.edu>; Mike Cizek W0VTT ; Paul Van > Der Eijk > Subject: Re: [Dx4win] County Report State After WY > > > > Glad it worked for you Bud! > > > > I'm a little surprised that it still was OK when you changed the call back > to AH6AA. In my testing, anytime I would remove AH6AA, the problem went > away and when I reverted back to the original log (that had AH6AA in it), I > would get the gibberish until I removed the AH6AA. > > > > I am glad everything is OK now and hope it continues to be! > > > > 73, > > Lee N7NU > > > > On Wed, Jun 2, 2021 at 3:04 AM Bud Governale w3ll...@gmail.com> > wrote: > > Hi Lee, > > > > Yes, you provided an easy solution. > > > > I searched for AH6AA and changed it to KH6AA, saved it, then exited and > restarted DX4WIN. > > The gibberish after WY in the county report was gone and the one worked > (W) in the county summary was gone. > > > > I then searched for KH6AA and changed it back to AH6AA and saved it. > > I exited and restarted DX4WIN. > > The gibberish after WY in the county report remained gone and the one > worked (W) in the county summary remained gone. > > > > I did not use your attached w3ll_new.zip file. > > > > Thanks Lee for spending the time to find an easy workable solution. Much > appreciated to Jim, Mike and Paul for their time. > > > > 73, > > > > Bud W3LL > > > > > > > > On Wed, Jun 2, 2021 at 4:05 AM Lee Hallin hall...@lanecc.edu> > wrote: > > Hi Bud, > > > > Well it took several hours but I think I figured it out (not sure why > though). If you search for call AH6AA on 5-30-21 and change the call (to > test my theory, I changed it) to KH6AA and save it. Exit DX4WIN and then > go back in. Try doing the County -> Listing and you should NOT get the > garbage line at the bottom. > > > > I "think" some AHxxx calls are not in the USA and I'm guessing AH6AA is > one of those. I'm guessing somehow that call throws DX4WIN off when doing > the tallying for counties. > > > > I attached w3ll_new.zip which contains w3ll_new2.dxl. I tried to make the > name unlikely to match a .dxl file you already have. This w3ll_new2.dxl > has the AH6AA call changed to KH6AA. To check it out, you can open the > w3ll_new2.dxl file directly (once unzipped) with DX4WIN. > > > > Let me know if the new file fixes the issue you were having. > > > > 73, > > Lee N7NU > > > > > > > > > > > > > > > > On Tue, Jun 1, 2021 at 5:50 PM Lee Hallin hall...@lanecc.edu> > wrote: > > Hi Bud, > > > > Good news (kinda) -- I get the same results that you saw. > > > > So far I haven't found any &quo
Re: [Dx4win] County Report State After WY
Thanks for posting this to the reflector, Lee. How did you figure out it was AH6AA, who really is in KH6? 73, Mike Cizek W0VTT From: Lee Hallin Sent: Wednesday, 2 June, 2021 08:49 To: w...@arrl.net Cc: DX4WIN Reflector ; Jim Reisert AD1C ; Mike Cizek W0VTT ; Paul Van Der Eijk Subject: Re: [Dx4win] County Report State After WY Glad it worked for you Bud! I'm a little surprised that it still was OK when you changed the call back to AH6AA. In my testing, anytime I would remove AH6AA, the problem went away and when I reverted back to the original log (that had AH6AA in it), I would get the gibberish until I removed the AH6AA. I am glad everything is OK now and hope it continues to be! 73, Lee N7NU On Wed, Jun 2, 2021 at 3:04 AM Bud Governale mailto:w3ll...@gmail.com> > wrote: Hi Lee, Yes, you provided an easy solution. I searched for AH6AA and changed it to KH6AA, saved it, then exited and restarted DX4WIN. The gibberish after WY in the county report was gone and the one worked (W) in the county summary was gone. I then searched for KH6AA and changed it back to AH6AA and saved it. I exited and restarted DX4WIN. The gibberish after WY in the county report remained gone and the one worked (W) in the county summary remained gone. I did not use your attached w3ll_new.zip file. Thanks Lee for spending the time to find an easy workable solution. Much appreciated to Jim, Mike and Paul for their time. 73, Bud W3LL On Wed, Jun 2, 2021 at 4:05 AM Lee Hallin mailto:hall...@lanecc.edu> > wrote: Hi Bud, Well it took several hours but I think I figured it out (not sure why though). If you search for call AH6AA on 5-30-21 and change the call (to test my theory, I changed it) to KH6AA and save it. Exit DX4WIN and then go back in. Try doing the County -> Listing and you should NOT get the garbage line at the bottom. I "think" some AHxxx calls are not in the USA and I'm guessing AH6AA is one of those. I'm guessing somehow that call throws DX4WIN off when doing the tallying for counties. I attached w3ll_new.zip which contains w3ll_new2.dxl. I tried to make the name unlikely to match a .dxl file you already have. This w3ll_new2.dxl has the AH6AA call changed to KH6AA. To check it out, you can open the w3ll_new2.dxl file directly (once unzipped) with DX4WIN. Let me know if the new file fixes the issue you were having. 73, Lee N7NU On Tue, Jun 1, 2021 at 5:50 PM Lee Hallin mailto:hall...@lanecc.edu> > wrote: Hi Bud, Good news (kinda) -- I get the same results that you saw. So far I haven't found any "bad" state values. I'll do more digging... Lee N7NU On Tue, Jun 1, 2021 at 5:29 PM Bud Governale mailto:w3ll...@gmail.com> > wrote: Hi Lee, Thanks for the offer to find and fix the problem. Attached is the zipped dxl file. 73, Bud W3LL On Tue, Jun 1, 2021 at 8:15 PM Lee Hallin mailto:hall...@lanecc.edu> > wrote: Hi Bud, If you want, send me the .DXL file and I'll see what I can find. Shouldn't take long to find the culprit. If you send it tonight, I'll send it back later tonight or tomorrow. I can look at the data many different ways so I should be able to find the problem and fix it (or at least delete it). 73, Lee N7NU On Tue, Jun 1, 2021 at 12:08 PM Bud Governale mailto:w3ll...@gmail.com> > wrote: Hi Paul, Both the State and County reports show states in alphabetical order. I looked at every state listed in both reports and cannot see a DC state. 73, Bud W3LL On Mon, May 31, 2021 at 10:28 PM Paul van der Eijk mailto:pvandere...@gmail.com> > wrote: > Bud, > > Open the logbook window > select report > pick a report that will show the state field > sort by state > > You should be able to the suspicious state in that sorted list; > most likely it is DC > > (a previous version allowed DC to be imported as a valid state; > most likely produced by a contest program) > > --Paul > > On Mon, May 31, 2021 at 1:09 PM Bud Governale <mailto:w3ll...@gmail.com> > wrote: > >> I deleted W2JQZ. That did not solve the problem. The gibberish W is now >> W1ONK. >> W2JQZ was the first QSO in the log out of 340,731. >> W2JQZ was deleted. >> Now W1ONK is the first QSO in the log. >> >> It does not appear to be a DC State issue. >> >> How do I fix the problem? >> >> 73, >> >> Bud W3LL >> w...@arrl.net <mailto:w...@arrl.net> >> >> On Mon, May 31, 2021 at 11:06 AM Bud Governale > <mailto:w3ll...@gmail.com> > wrote: >> >> > Reports>WAS>Listing>OK >> > The listing ends at WY. No DC. >> > >> > F8>Enter DC in State box>enter >> > Result is no m
Re: [Dx4win] County Report State After WY
Glad it worked for you Bud! I'm a little surprised that it still was OK when you changed the call back to AH6AA. In my testing, anytime I would remove AH6AA, the problem went away and when I reverted back to the original log (that had AH6AA in it), I would get the gibberish until I removed the AH6AA. I am glad everything is OK now and hope it continues to be! 73, Lee N7NU On Wed, Jun 2, 2021 at 3:04 AM Bud Governale wrote: > Hi Lee, > > Yes, you provided an easy solution. > > I searched for AH6AA and changed it to KH6AA, saved it, then exited and > restarted DX4WIN. > The gibberish after WY in the county report was gone and the one worked > (W) in the county summary was gone. > > I then searched for KH6AA and changed it back to AH6AA and saved it. > I exited and restarted DX4WIN. > The gibberish after WY in the county report remained gone and the one > worked (W) in the county summary remained gone. > > I did not use your attached w3ll_new.zip file. > > Thanks Lee for spending the time to find an easy workable solution. Much > appreciated to Jim, Mike and Paul for their time. > > 73, > > Bud W3LL > > > > On Wed, Jun 2, 2021 at 4:05 AM Lee Hallin wrote: > >> Hi Bud, >> >> Well it took several hours but I think I figured it out (not sure why >> though). If you search for call AH6AA on 5-30-21 and change the call (to >> test my theory, I changed it) to KH6AA and save it. Exit DX4WIN and then >> go back in. Try doing the County -> Listing and you should NOT get the >> garbage line at the bottom. >> >> I "think" some AHxxx calls are not in the USA and I'm guessing AH6AA is >> one of those. I'm guessing somehow that call throws DX4WIN off when doing >> the tallying for counties. >> >> I attached w3ll_new.zip which contains w3ll_new2.dxl. I tried to make >> the name unlikely to match a .dxl file you already have. This >> w3ll_new2.dxl has the AH6AA call changed to KH6AA. To check it out, you >> can open the w3ll_new2.dxl file directly (once unzipped) with DX4WIN. >> >> Let me know if the new file fixes the issue you were having. >> >> 73, >> Lee N7NU >> >> >> >> >> >> >> >> On Tue, Jun 1, 2021 at 5:50 PM Lee Hallin wrote: >> >>> Hi Bud, >>> >>> Good news (kinda) -- I get the same results that you saw. >>> >>> So far I haven't found any "bad" state values. I'll do more digging... >>> >>> Lee N7NU >>> >>> On Tue, Jun 1, 2021 at 5:29 PM Bud Governale wrote: >>> Hi Lee, Thanks for the offer to find and fix the problem. Attached is the zipped dxl file. 73, Bud W3LL On Tue, Jun 1, 2021 at 8:15 PM Lee Hallin wrote: > Hi Bud, > > If you want, send me the .DXL file and I'll see what I can find. > Shouldn't take long to find the culprit. If you send it tonight, I'll > send > it back later tonight or tomorrow. > I can look at the data many different ways so I should be able to find > the problem and fix it (or at least delete it). > > 73, > Lee N7NU > > On Tue, Jun 1, 2021 at 12:08 PM Bud Governale > wrote: > >> Hi Paul, >> >> Both the State and County reports show states in alphabetical order. >> I looked at every state listed in both reports and cannot see a DC >> state. >> >> 73, >> >> Bud W3LL >> >> >> >> On Mon, May 31, 2021 at 10:28 PM Paul van der Eijk < >> pvandere...@gmail.com> >> wrote: >> >> > Bud, >> > >> > Open the logbook window >> > select report >> > pick a report that will show the state field >> > sort by state >> > >> > You should be able to the suspicious state in that sorted list; >> > most likely it is DC >> > >> > (a previous version allowed DC to be imported as a valid state; >> > most likely produced by a contest program) >> > >> > --Paul >> > >> > On Mon, May 31, 2021 at 1:09 PM Bud Governale >> wrote: >> > >> >> I deleted W2JQZ. That did not solve the problem. The gibberish W >> is now >> >> W1ONK. >> >> W2JQZ was the first QSO in the log out of 340,731. >> >> W2JQZ was deleted. >> >> Now W1ONK is the first QSO in the log. >> >> >> >> It does not appear to be a DC State issue. >> >> >> >> How do I fix the problem? >> >> >> >> 73, >> >> >> >> Bud W3LL >> >> w...@arrl.net >> >> >> >> On Mon, May 31, 2021 at 11:06 AM Bud Governale >> wrote: >> >> >> >> > Reports>WAS>Listing>OK >> >> > The listing ends at WY. No DC. >> >> > >> >> > F8>Enter DC in State box>enter >> >> > Result is no matching qso found. >> >> > >> >> > A restart of DX4IN does not fix the problem. >> >> > >> >> > >> >> > >> >> > On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C < >> >> jjreis...@alum.mit.edu> >> >> > wrote: >> >> > >> >> >> You probably have a "DC" in one of your State fields. Remove >> it. >> >> >>
Re: [Dx4win] County Report State After WY
Hi Lee, Yes, you provided an easy solution. I searched for AH6AA and changed it to KH6AA, saved it, then exited and restarted DX4WIN. The gibberish after WY in the county report was gone and the one worked (W) in the county summary was gone. I then searched for KH6AA and changed it back to AH6AA and saved it. I exited and restarted DX4WIN. The gibberish after WY in the county report remained gone and the one worked (W) in the county summary remained gone. I did not use your attached w3ll_new.zip file. Thanks Lee for spending the time to find an easy workable solution. Much appreciated to Jim, Mike and Paul for their time. 73, Bud W3LL On Wed, Jun 2, 2021 at 4:05 AM Lee Hallin wrote: > Hi Bud, > > Well it took several hours but I think I figured it out (not sure why > though). If you search for call AH6AA on 5-30-21 and change the call (to > test my theory, I changed it) to KH6AA and save it. Exit DX4WIN and then > go back in. Try doing the County -> Listing and you should NOT get the > garbage line at the bottom. > > I "think" some AHxxx calls are not in the USA and I'm guessing AH6AA is > one of those. I'm guessing somehow that call throws DX4WIN off when doing > the tallying for counties. > > I attached w3ll_new.zip which contains w3ll_new2.dxl. I tried to make the > name unlikely to match a .dxl file you already have. This w3ll_new2.dxl > has the AH6AA call changed to KH6AA. To check it out, you can open the > w3ll_new2.dxl file directly (once unzipped) with DX4WIN. > > Let me know if the new file fixes the issue you were having. > > 73, > Lee N7NU > > > > > > > > On Tue, Jun 1, 2021 at 5:50 PM Lee Hallin wrote: > >> Hi Bud, >> >> Good news (kinda) -- I get the same results that you saw. >> >> So far I haven't found any "bad" state values. I'll do more digging... >> >> Lee N7NU >> >> On Tue, Jun 1, 2021 at 5:29 PM Bud Governale wrote: >> >>> Hi Lee, >>> >>> Thanks for the offer to find and fix the problem. >>> Attached is the zipped dxl file. >>> >>> 73, >>> >>> Bud W3LL >>> >>> On Tue, Jun 1, 2021 at 8:15 PM Lee Hallin wrote: >>> Hi Bud, If you want, send me the .DXL file and I'll see what I can find. Shouldn't take long to find the culprit. If you send it tonight, I'll send it back later tonight or tomorrow. I can look at the data many different ways so I should be able to find the problem and fix it (or at least delete it). 73, Lee N7NU On Tue, Jun 1, 2021 at 12:08 PM Bud Governale wrote: > Hi Paul, > > Both the State and County reports show states in alphabetical order. > I looked at every state listed in both reports and cannot see a DC > state. > > 73, > > Bud W3LL > > > > On Mon, May 31, 2021 at 10:28 PM Paul van der Eijk < > pvandere...@gmail.com> > wrote: > > > Bud, > > > > Open the logbook window > > select report > > pick a report that will show the state field > > sort by state > > > > You should be able to the suspicious state in that sorted list; > > most likely it is DC > > > > (a previous version allowed DC to be imported as a valid state; > > most likely produced by a contest program) > > > > --Paul > > > > On Mon, May 31, 2021 at 1:09 PM Bud Governale > wrote: > > > >> I deleted W2JQZ. That did not solve the problem. The gibberish W is > now > >> W1ONK. > >> W2JQZ was the first QSO in the log out of 340,731. > >> W2JQZ was deleted. > >> Now W1ONK is the first QSO in the log. > >> > >> It does not appear to be a DC State issue. > >> > >> How do I fix the problem? > >> > >> 73, > >> > >> Bud W3LL > >> w...@arrl.net > >> > >> On Mon, May 31, 2021 at 11:06 AM Bud Governale > wrote: > >> > >> > Reports>WAS>Listing>OK > >> > The listing ends at WY. No DC. > >> > > >> > F8>Enter DC in State box>enter > >> > Result is no matching qso found. > >> > > >> > A restart of DX4IN does not fix the problem. > >> > > >> > > >> > > >> > On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C < > >> jjreis...@alum.mit.edu> > >> > wrote: > >> > > >> >> You probably have a "DC" in one of your State fields. Remove it. > >> >> Save your log. Re-start DX4WIN > >> >> > >> >> On Mon, May 31, 2021 at 5:48 AM Bud Governale > > >> wrote: > >> >> > > >> >> > Issue with County>reports>Listing > >> >> > > >> >> > The Reports>County>Summary shows a 1 (one) in Worked Mixed. > >> >> > Go to Reports>County>Listing: > >> >> > After the state WY there is a line for the next state. The > state is > >> >> blank, > >> >> > the county is gibberish and a W in the Mix column. > >> >> > Clicking on the W opens the Entry window showing W2JQZ, State > NY and > >> no > >> >> > county listed. > >>
Re: [Dx4win] County Report State After WY
> Both the State and County reports show states in alphabetical order. > I looked at every state listed in both reports and cannot see a DC state. Bud, I don't think that's what Paul meant. In the QSO window, use the Sort menu to sort by State. Use control-END to look at the last few QSOs in your log to see if there is an unusual value in the State field. Then while still sorted by State, use F8 and search for AK. When the first QSO comes up, type ESC and use the page-up key to go BACKWARD from that QSO. Again, see if there is an unusual value in the State field. This won't find state strings that are not state abbreviations, but lie somewhere between AK and WY. I'm not sure how to do it from this point, other than searching each of the 50 state abbreviations, using ESC, then see if earlier QSO(s) contain a non-state abbreviation. -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] County Report State After WY
Hi Paul, Both the State and County reports show states in alphabetical order. I looked at every state listed in both reports and cannot see a DC state. 73, Bud W3LL On Mon, May 31, 2021 at 10:28 PM Paul van der Eijk wrote: > Bud, > > Open the logbook window > select report > pick a report that will show the state field > sort by state > > You should be able to the suspicious state in that sorted list; > most likely it is DC > > (a previous version allowed DC to be imported as a valid state; > most likely produced by a contest program) > > --Paul > > On Mon, May 31, 2021 at 1:09 PM Bud Governale wrote: > >> I deleted W2JQZ. That did not solve the problem. The gibberish W is now >> W1ONK. >> W2JQZ was the first QSO in the log out of 340,731. >> W2JQZ was deleted. >> Now W1ONK is the first QSO in the log. >> >> It does not appear to be a DC State issue. >> >> How do I fix the problem? >> >> 73, >> >> Bud W3LL >> w...@arrl.net >> >> On Mon, May 31, 2021 at 11:06 AM Bud Governale wrote: >> >> > Reports>WAS>Listing>OK >> > The listing ends at WY. No DC. >> > >> > F8>Enter DC in State box>enter >> > Result is no matching qso found. >> > >> > A restart of DX4IN does not fix the problem. >> > >> > >> > >> > On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C < >> jjreis...@alum.mit.edu> >> > wrote: >> > >> >> You probably have a "DC" in one of your State fields. Remove it. >> >> Save your log. Re-start DX4WIN >> >> >> >> On Mon, May 31, 2021 at 5:48 AM Bud Governale >> wrote: >> >> > >> >> > Issue with County>reports>Listing >> >> > >> >> > The Reports>County>Summary shows a 1 (one) in Worked Mixed. >> >> > Go to Reports>County>Listing: >> >> > After the state WY there is a line for the next state. The state is >> >> blank, >> >> > the county is gibberish and a W in the Mix column. >> >> > Clicking on the W opens the Entry window showing W2JQZ, State NY and >> no >> >> > county listed. >> >> > >> >> > How do I remove the state after state WY? >> >> > >> >> > 73, >> >> > >> >> > Bud W3LL >> >> > w...@arrl.net >> >> > __ >> >> > DX4WIN mailing list >> >> > Home: http://mailman.qth.net/mailman/listinfo/dx4win >> >> > Help: http://mailman.qth.net/mmfaq.htm >> >> > Post: mailto:DX4WIN@mailman.qth.net >> >> > >> >> > This list hosted by: http://www.qsl.net >> >> > Please help support this email list: http://www.qsl.net/donate.html >> >> >> >> >> >> >> >> -- >> >> Jim Reisert AD1C, , https://www.ad1c.us >> >> >> > >> __ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > -- > ~ > DX4WIN logging software > Paul van der Eijk, KK4HD > BrookHill Data Systems LLC > http://www.dx4win.com > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] County Report State After WY
Bud, Open the logbook window select report pick a report that will show the state field sort by state You should be able to the suspicious state in that sorted list; most likely it is DC (a previous version allowed DC to be imported as a valid state; most likely produced by a contest program) --Paul On Mon, May 31, 2021 at 1:09 PM Bud Governale wrote: > I deleted W2JQZ. That did not solve the problem. The gibberish W is now > W1ONK. > W2JQZ was the first QSO in the log out of 340,731. > W2JQZ was deleted. > Now W1ONK is the first QSO in the log. > > It does not appear to be a DC State issue. > > How do I fix the problem? > > 73, > > Bud W3LL > w...@arrl.net > > On Mon, May 31, 2021 at 11:06 AM Bud Governale wrote: > > > Reports>WAS>Listing>OK > > The listing ends at WY. No DC. > > > > F8>Enter DC in State box>enter > > Result is no matching qso found. > > > > A restart of DX4IN does not fix the problem. > > > > > > > > On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C < > jjreis...@alum.mit.edu> > > wrote: > > > >> You probably have a "DC" in one of your State fields. Remove it. > >> Save your log. Re-start DX4WIN > >> > >> On Mon, May 31, 2021 at 5:48 AM Bud Governale > wrote: > >> > > >> > Issue with County>reports>Listing > >> > > >> > The Reports>County>Summary shows a 1 (one) in Worked Mixed. > >> > Go to Reports>County>Listing: > >> > After the state WY there is a line for the next state. The state is > >> blank, > >> > the county is gibberish and a W in the Mix column. > >> > Clicking on the W opens the Entry window showing W2JQZ, State NY and > no > >> > county listed. > >> > > >> > How do I remove the state after state WY? > >> > > >> > 73, > >> > > >> > Bud W3LL > >> > w...@arrl.net > >> > __ > >> > DX4WIN mailing list > >> > Home: http://mailman.qth.net/mailman/listinfo/dx4win > >> > Help: http://mailman.qth.net/mmfaq.htm > >> > Post: mailto:DX4WIN@mailman.qth.net > >> > > >> > This list hosted by: http://www.qsl.net > >> > Please help support this email list: http://www.qsl.net/donate.html > >> > >> > >> > >> -- > >> Jim Reisert AD1C, , https://www.ad1c.us > >> > > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- ~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] County Report State After WY
I deleted W2JQZ. That did not solve the problem. The gibberish W is now W1ONK. W2JQZ was the first QSO in the log out of 340,731. W2JQZ was deleted. Now W1ONK is the first QSO in the log. It does not appear to be a DC State issue. How do I fix the problem? 73, Bud W3LL w...@arrl.net On Mon, May 31, 2021 at 11:06 AM Bud Governale wrote: > Reports>WAS>Listing>OK > The listing ends at WY. No DC. > > F8>Enter DC in State box>enter > Result is no matching qso found. > > A restart of DX4IN does not fix the problem. > > > > On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C > wrote: > >> You probably have a "DC" in one of your State fields. Remove it. >> Save your log. Re-start DX4WIN >> >> On Mon, May 31, 2021 at 5:48 AM Bud Governale wrote: >> > >> > Issue with County>reports>Listing >> > >> > The Reports>County>Summary shows a 1 (one) in Worked Mixed. >> > Go to Reports>County>Listing: >> > After the state WY there is a line for the next state. The state is >> blank, >> > the county is gibberish and a W in the Mix column. >> > Clicking on the W opens the Entry window showing W2JQZ, State NY and no >> > county listed. >> > >> > How do I remove the state after state WY? >> > >> > 73, >> > >> > Bud W3LL >> > w...@arrl.net >> > __ >> > DX4WIN mailing list >> > Home: http://mailman.qth.net/mailman/listinfo/dx4win >> > Help: http://mailman.qth.net/mmfaq.htm >> > Post: mailto:DX4WIN@mailman.qth.net >> > >> > This list hosted by: http://www.qsl.net >> > Please help support this email list: http://www.qsl.net/donate.html >> >> >> >> -- >> Jim Reisert AD1C, , https://www.ad1c.us >> > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] County Report State After WY
Reports>WAS>Listing>OK The listing ends at WY. No DC. F8>Enter DC in State box>enter Result is no matching qso found. A restart of DX4IN does not fix the problem. On Mon, May 31, 2021 at 10:40 AM Jim Reisert AD1C wrote: > You probably have a "DC" in one of your State fields. Remove it. > Save your log. Re-start DX4WIN > > On Mon, May 31, 2021 at 5:48 AM Bud Governale wrote: > > > > Issue with County>reports>Listing > > > > The Reports>County>Summary shows a 1 (one) in Worked Mixed. > > Go to Reports>County>Listing: > > After the state WY there is a line for the next state. The state is > blank, > > the county is gibberish and a W in the Mix column. > > Clicking on the W opens the Entry window showing W2JQZ, State NY and no > > county listed. > > > > How do I remove the state after state WY? > > > > 73, > > > > Bud W3LL > > w...@arrl.net > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > -- > Jim Reisert AD1C, , https://www.ad1c.us > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] County Report State After WY
You probably have a "DC" in one of your State fields. Remove it. Save your log. Re-start DX4WIN On Mon, May 31, 2021 at 5:48 AM Bud Governale wrote: > > Issue with County>reports>Listing > > The Reports>County>Summary shows a 1 (one) in Worked Mixed. > Go to Reports>County>Listing: > After the state WY there is a line for the next state. The state is blank, > the county is gibberish and a W in the Mix column. > Clicking on the W opens the Entry window showing W2JQZ, State NY and no > county listed. > > How do I remove the state after state WY? > > 73, > > Bud W3LL > w...@arrl.net > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -- Jim Reisert AD1C, , https://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] County Report State After WY
Issue with County>reports>Listing The Reports>County>Summary shows a 1 (one) in Worked Mixed. Go to Reports>County>Listing: After the state WY there is a line for the next state. The state is blank, the county is gibberish and a W in the Mix column. Clicking on the W opens the Entry window showing W2JQZ, State NY and no county listed. How do I remove the state after state WY? 73, Bud W3LL w...@arrl.net __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
