Cc: Michael D Kinney <michael.d.kin...@intel.com> Cc: Kelly Steele <kelly.ste...@intel.com> Cc: Feng Tian <feng.t...@intel.com> Cc: Star Zeng <star.z...@intel.com> Cc: Liming Gao <liming....@intel.com> Cc: Chao Zhang <chao.b.zh...@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen....@intel.com> --- QuarkPlatformPkg/Readme.md | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/QuarkPlatformPkg/Readme.md b/QuarkPlatformPkg/Readme.md index 8f5b898..f925f9e 100644 --- a/QuarkPlatformPkg/Readme.md +++ b/QuarkPlatformPkg/Readme.md @@ -146,6 +146,8 @@ features on the build command line using ```-D``` flags. | ```SECURE_BOOT_ENABLE``` | FALSE | TRUE, FALSE | | ```MEASURED_BOOT_ENABLE``` | FALSE | TRUE, FALSE | | ```TPM_12_HARDWARE``` | NONE | NONE, LPC, ATMEL_I2C, INFINEON_I2C | +| ```CAPSULE_ENABLE``` | FALSE | TRUE, FALSE | +| ```RECOVERY_ENABLE``` | FALSE | TRUE, FALSE | * ```GALILEO``` - Used to specify the type of Intel(R) Galileo board type. The default is ```GEN2``` for the [Intel(R) Galileo Gen 2 Development Board]( @@ -199,6 +201,22 @@ features on the build command line using ```-D``` flags. has been tested with the [CryptoShield](https://www.sparkfun.com/products/13183) available from [SparkFun](https://www.sparkfun.com/). +* ```CAPSULE_ENABLE``` - Used to enable/disable capsule update features. + The default is FALSE for disabled. Add ```-D CAPSULE_ENABLE``` to the + build command line to enable capsule update features. + The build process generate capsule update image - QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap. + The user need copy QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap and CapsuleApp.efi + to a storage media attached to the Quark Board. + Then the user can boot to shell and run ```CapsuleApp QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap```. + In next reboot, the system firmware is updated. + +* ```RECOVERY_ENABLE``` - Used to enable/disable recovery features. + The default is FALSE for disabled. Add ```-D RECOVERY_ENABLE``` to the + build command line to enable recovery features. + The build process generates the recovery capsule image - QUARKREC.Cap. + Then the user need copy QUARKREC.Cap to a USB KEY, plug the USB KEY to the Quark Board. + In next boot, if a user runs ForceRecovery.efi in shell, or if a user presses the RESET button during power on, warm reset or REBOOT, + or if the FvMain is corrupted in flash, the system will boot into recovery mode. ### **Example Build Commands** -- 2.7.4.windows.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
