Re: [Ekiga-list] Newbie questions
On 12/03/13 02:08, Tron wrote: The dialogue box about Ekiga not configuring ports was appearing EVERY time Ekiga started for BOTH 4.0.0 and 4.0.1. This was the case on BOTH computers tested (desktop and laptop both of which were behind the same firewall of my gateway). The required ports on my firewall (m0n0wall) were opened manually and verified as being open with PF Port Checker from both computers. Then maybe the STUN checking has a bug?! Less likely, but anyway: To verify this, start wireshark and start capturing right before ekiga starts, and stop it right after ekiga registers. Save the file of wireshark and give it to me. Pay attention that no confidential information is shown by wireshark and/or send it to me directly. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Please explain what is wireshark, how to use it and I'll be happy to give it a try. On 4/3/2013 3:01 AM, Eugen Dedu wrote: On 12/03/13 02:08, Tron wrote: The dialogue box about Ekiga not configuring ports was appearing EVERY time Ekiga started for BOTH 4.0.0 and 4.0.1. This was the case on BOTH computers tested (desktop and laptop both of which were behind the same firewall of my gateway). The required ports on my firewall (m0n0wall) were opened manually and verified as being open with PF Port Checker from both computers. Then maybe the STUN checking has a bug?! Less likely, but anyway: To verify this, start wireshark and start capturing right before ekiga starts, and stop it right after ekiga registers. Save the file of wireshark and give it to me. Pay attention that no confidential information is shown by wireshark and/or send it to me directly. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Le 03/04/2013 21:53, *Tron* wrote: Please explain what is wireshark, how to use it and I'll be happy to give it a try. Wireshark, formerly known as ethereal, is a very powerfull network tool: http://www.wireshark.org/ You have to learn few things for basic use: http://wiresharkdownloads.riverbed.com/video/wireshark/introduction-to-wireshark/ http://www.wireshark.org/download.html ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Hi, I put at http://eugen.dedu.free.fr/m.exe the latest ekiga (post 4.0.1) with a modification done between 4.0.0 and 4.0.1 removed. This is the only modification I see which could generate the problem you describe. Test it and tell if it gives the same results as 4.0.0 or not. On 12/03/13 02:08, Tron wrote: Hi Eugen and thank you again for your persistence in this matter :). Since I do not want to repeatedly install one version of Ekiga over the other and repeat the same tests over and over, I will just say that each test was repeated MANY times in each mode on each version of the program. The exact chronology of the actions taken and results observed is depicted exactly in this thread. Reading all entries from the start should answer your questions. But, for your convenience, here are my answers again: On 3/11/2013 10:21 AM, Eugen Dedu wrote: Polaris, you wrote that ekiga 4.0.0 works, but ekiga 4.0.1 does not. 4.0.0 worked better than 4.0.1. 01 couldn't even register to Ekiga.net and not even an echo test worked. But 00 never worked fully either - echo and call back tests worked (with video present) but calls to another person (only one person was called and calls were recieved from him multiple times within 30 minutes) only worked without video (ie: voice only). Only once, for a brief instant I saw an image of the other person at the very beginning of the call. After that the image disappeared and the call continued in voice only. The results of that test were described in February's thread: Ekiga test today. Do you always or most often receive the dialogue box about Ekiga did not manage to configure... when starting ekiga 4.0.0? But with 4.0.1? The dialogue box about Ekiga not configuring ports was appearing EVERY time Ekiga started for BOTH 4.0.0 and 4.0.1. This was the case on BOTH computers tested (desktop and laptop both of which were behind the same firewall of my gateway). The required ports on my firewall (m0n0wall) were opened manually and verified as being open with PF Port Checker from both computers. With 4.0.0, has it worked with several outgoing and incoming calls, or you have tested only once (calling once 5...@ekiga.net for ex.)? After I first installed 4.0.0, both echo and call back tests always worked with video (repeated MANY times). After I installed 4.0.1 over 4.0.0, nothing worked even once. Then two things were done: I installed Skype and installed 4.0.0 over 4.0.1 (don't remember which was done first). The roll back was done as per your request to run the -d 4 log on 4.0.0. But after the rollback, 4.0.0 didn't work as before. The echo test now always works with audio only (never with video) and the call back test now never works: Ekiga hangs as soon as I pick up after the system calls me back and this happens every time. Please do several tests, call and receive calls, and only afterwards answer this e-mail. I ask this because I am told that BOTH releases do not work for you in fact. As soon as the dialogue box appear (if it appears occasionally, say 10% of the time, then this is not a problem), the port forwarding does not function properly. In this case we try to PREVENT you from registering, since even if you do register, you will certainly have communication problems (non audio/video most of the time when calling or when called). ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Polaris, you wrote that ekiga 4.0.0 works, but ekiga 4.0.1 does not. Do you always or most often receive the dialogue box about Ekiga did not manage to configure... when starting ekiga 4.0.0? But with 4.0.1? With 4.0.0, has it worked with several outgoing and incoming calls, or you have tested only once (calling once 5...@ekiga.net for ex.)? Please do several tests, call and receive calls, and only afterwards answer this e-mail. I ask this because I am told that BOTH releases do not work for you in fact. As soon as the dialogue box appear (if it appears occasionally, say 10% of the time, then this is not a problem), the port forwarding does not function properly. In this case we try to PREVENT you from registering, since even if you do register, you will certainly have communication problems (non audio/video most of the time when calling or when called). -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Hi Eugen and thank you again for your persistence in this matter :). Since I do not want to repeatedly install one version of Ekiga over the other and repeat the same tests over and over, I will just say that each test was repeated MANY times in each mode on each version of the program. The exact chronology of the actions taken and results observed is depicted exactly in this thread. Reading all entries from the start should answer your questions. But, for your convenience, here are my answers again: On 3/11/2013 10:21 AM, Eugen Dedu wrote: Polaris, you wrote that ekiga 4.0.0 works, but ekiga 4.0.1 does not. 4.0.0 worked better than 4.0.1. 01 couldn't even register to Ekiga.net and not even an echo test worked. But 00 never worked fully either - echo and call back tests worked (with video present) but calls to another person (only one person was called and calls were recieved from him multiple times within 30 minutes) only worked without video (ie: voice only). Only once, for a brief instant I saw an image of the other person at the very beginning of the call. After that the image disappeared and the call continued in voice only. The results of that test were described in February's thread: Ekiga test today. Do you always or most often receive the dialogue box about Ekiga did not manage to configure... when starting ekiga 4.0.0? But with 4.0.1? The dialogue box about Ekiga not configuring ports was appearing EVERY time Ekiga started for BOTH 4.0.0 and 4.0.1. This was the case on BOTH computers tested (desktop and laptop both of which were behind the same firewall of my gateway). The required ports on my firewall (m0n0wall) were opened manually and verified as being open with PF Port Checker from both computers. With 4.0.0, has it worked with several outgoing and incoming calls, or you have tested only once (calling once 5...@ekiga.net for ex.)? After I first installed 4.0.0, both echo and call back tests always worked with video (repeated MANY times). After I installed 4.0.1 over 4.0.0, nothing worked even once. Then two things were done: I installed Skype and installed 4.0.0 over 4.0.1 (don't remember which was done first). The roll back was done as per your request to run the -d 4 log on 4.0.0. But after the rollback, 4.0.0 didn't work as before. The echo test now always works with audio only (never with video) and the call back test now never works: Ekiga hangs as soon as I pick up after the system calls me back and this happens every time. Please do several tests, call and receive calls, and only afterwards answer this e-mail. I ask this because I am told that BOTH releases do not work for you in fact. As soon as the dialogue box appear (if it appears occasionally, say 10% of the time, then this is not a problem), the port forwarding does not function properly. In this case we try to PREVENT you from registering, since even if you do register, you will certainly have communication problems (non audio/video most of the time when calling or when called). ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
I understand that it is annoying, but adding a checkbox means adding it to configuration files too, allow users to uncheck it, take into account users who forgot this, or worse users who change network (work-home) and where parameters are different etc. So we need to think a bit about that before implementing anything. On 04/03/13 03:06, Tron wrote: Re: the error message in 1. Since it may be difficult (or impossible?) for Ekiga to detect and/or configure ports on remote firewalls, perhaps a simpler (or at least quicker/temporary) solution would be to include an option checkbox in the error notice saying: check box not to be reminded of this next time Ekiga starts. On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Any chance of seeing this option in the next Ekiga version? On 3/3/2013 6:06 PM, Tron wrote: Re: the error message in 1. Since it may be difficult (or impossible?) for Ekiga to detect and/or configure ports on remote firewalls, perhaps a simpler (or at least quicker/temporary) solution would be to include an option checkbox in the error notice saying: check box not to be reminded of this next time Ekiga starts. On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
It could be fast. It will be in next 4.0.2 release. I can send you an .exe as soon as it is fixed. On 26/02/13 22:17, Polaris wrote: Thanks Eugen. I wonder how soon the fix will become available. Will it be included in 4.0.2 or earlier? On 2/26/2013 1:10 PM, Eugen Dedu wrote: Yes, I noticed where the problem is and think have found when the problem was introduced. I wait for the developer responsible of it to answer... On 26/02/13 21:50, Polaris wrote: Any luck figuring out my -d 4 logs? On 2/24/2013 4:50 PM, Polaris wrote: Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Awesome, thanks! So does that mean I can get an .exe even before 4.0.2 is released? On 2/27/2013 2:52 AM, Eugen Dedu wrote: It could be fast. It will be in next 4.0.2 release. I can send you an .exe as soon as it is fixed. On 26/02/13 22:17, Polaris wrote: Thanks Eugen. I wonder how soon the fix will become available. Will it be included in 4.0.2 or earlier? On 2/26/2013 1:10 PM, Eugen Dedu wrote: Yes, I noticed where the problem is and think have found when the problem was introduced. I wait for the developer responsible of it to answer... On 26/02/13 21:50, Polaris wrote: Any luck figuring out my -d 4 logs? On 2/24/2013 4:50 PM, Polaris wrote: Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Any luck figuring out my -d 4 logs? On 2/24/2013 4:50 PM, Polaris wrote: Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Yes, I noticed where the problem is and think have found when the problem was introduced. I wait for the developer responsible of it to answer... On 26/02/13 21:50, Polaris wrote: Any luck figuring out my -d 4 logs? On 2/24/2013 4:50 PM, Polaris wrote: Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Thanks Eugen. I wonder how soon the fix will become available. Will it be included in 4.0.2 or earlier? On 2/26/2013 1:10 PM, Eugen Dedu wrote: Yes, I noticed where the problem is and think have found when the problem was introduced. I wait for the developer responsible of it to answer... On 26/02/13 21:50, Polaris wrote: Any luck figuring out my -d 4 logs? On 2/24/2013 4:50 PM, Polaris wrote: Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Just reinstalled 4.0.0 as requested and ran the debug. At start up Ekiga behaved as after the original install of 4.0.0: no yellow triangle exclamation warning saying: Could not register to Ekiga.net in the system tray. But things went differently during tests . During the echo test could hear myself but this time there was no video of myself (just a bouncing ball). And during a call back test, I got a call back but then the program hung every time (no audio or video). The only change to the system I can think off, after the original install of Ekiga 4.0.0, was the installation of Skype. http://www.adrive.com/public/v2mpP8/ekiga-stderr.400.7z On 2/24/2013 1:17 PM, Eugen Dedu wrote: Just installing 4.0.0 is sufficient. On 24/02/13 21:47, Polaris wrote: The echo and call back tests always did work with 4.0.0 and never work now with 4.0.1 (an actual call to someone else was performed only once and did work with problems discussed in the thread Ekiga test today). Too bad you didn't ask me for this log before I got rid of 4.0.0 :) To roll back the version (under Win), should I do an uninstall of the newer version first? On 2/24/2013 12:28 PM, Eugen Dedu wrote: Could you install ekiga 4.0.0 and give me the same log (where it works)? It is at available at http://ftp.acc.umu.se/pub/gnome/binaries/win32/ekiga/4.0/ . Does it always work with 4.0.0 and always not work with 4.0.1? On 24/02/13 08:02, Polaris wrote: Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Ran |ekiga.exe -d 4| as instructed. Look the |ekiga-stderr.7z file attached (compressed with 7zip.)| Only actions performed were to try an echo and a call back test. Following that tried to exit Ekiga but got an OS message that Ekiga didn't shut down correctly. Please advise on the next step once you decipher the debug, Thanks. ekiga-stderr.txt On 2/23/2013 1:04 AM, Eugen Dedu wrote: On 22/02/13 21:45, Polaris wrote: Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... I would be interested to give me a log (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2) with ekiga 4.0.0 working and 4.0.1 not working. - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ekiga-stderr.7z Description: Binary data ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Re #1 (port error message): In case the details of my setup will help to figure out the reason, here they are: I was running Ekiga 4.0.0 under Win XP sp2 on a Pentium III box without any firewall on it. My firewall is m0n0wall running on a separate box acting as a gateway. If I can make calls just fine and in case, due to the particulars of my set up, Ekiga is unable to automatically test for open ports, is it possible to change something manually within Ekiga so as not to see this annoying message? Thanks. On 2/21/2013 7:43 AM, Eugen Dedu wrote: On 17/02/13 00:03, Polaris wrote: Re #1: I was able to call another Ekiga user and had him call me. We were able to repeat that several times; therefore the right ports are open - yet I keep getting the same annoying error message every time Ekiga starts. [the problems in our connections were described on the thread: 'Ekiga test today'] What to do next? As far aas I can say, it is not easy to find out if it will work or not, so that text message will remain there. We have to think about all that. Re #3: Is echo problem common place with Ekiga and is a head set the only way to eliminate it? Yes for both; alternatively, I have seen USB microphone+speaker which do, they say, echo cancellation, probably in hardware, but this needs to be tested. No VoIP free software has professional echo cancellation support. Regarding Video Quality: My camera supports res up to 720p, Ekiga is suppose to support up to 480p but the picture I observed on my screen was rather poor. Besides lighting, is there anything I can do to improve the picture? Use maximum available resolution in ekiga. Try also the video control small window in ekiga (lighting, contrast etc.), once the call window is shown. On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
On 22/02/13 20:07, Polaris wrote: Re #1 (port error message): In case the details of my setup will help to figure out the reason, here they are: I was running Ekiga 4.0.0 under Win XP sp2 on a Pentium III box without any firewall on it. My firewall is m0n0wall running on a separate box acting as a gateway. If I can make calls just fine and in case, due to the particulars of my set up, Ekiga is unable to automatically test for open ports, is it possible to change something manually within Ekiga so as not to see this annoying message? No, sorry. We will think about that. On 2/21/2013 7:43 AM, Eugen Dedu wrote: On 17/02/13 00:03, Polaris wrote: Re #1: I was able to call another Ekiga user and had him call me. We were able to repeat that several times; therefore the right ports are open - yet I keep getting the same annoying error message every time Ekiga starts. [the problems in our connections were described on the thread: 'Ekiga test today'] What to do next? As far aas I can say, it is not easy to find out if it will work or not, so that text message will remain there. We have to think about all that. Re #3: Is echo problem common place with Ekiga and is a head set the only way to eliminate it? Yes for both; alternatively, I have seen USB microphone+speaker which do, they say, echo cancellation, probably in hardware, but this needs to be tested. No VoIP free software has professional echo cancellation support. Regarding Video Quality: My camera supports res up to 720p, Ekiga is suppose to support up to 480p but the picture I observed on my screen was rather poor. Besides lighting, is there anything I can do to improve the picture? Use maximum available resolution in ekiga. Try also the video control small window in ekiga (lighting, contrast etc.), once the call window is shown. On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Re: open port error message Just installed 4.0.1 (over 4.0.0 on WinXP). The old port message is still there (no big surprise) but now I get another problem: In the system tray I get a yellow triangle exclamation warning saying: Could not register to Ekiga.net. Now even the echo test doesn't work, I get a message: Security check failed. So now Ekiga really doesn't work for me... - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
On 17/02/13 00:03, Polaris wrote: Re #1: I was able to call another Ekiga user and had him call me. We were able to repeat that several times; therefore the right ports are open - yet I keep getting the same annoying error message every time Ekiga starts. [the problems in our connections were described on the thread: 'Ekiga test today'] What to do next? As far aas I can say, it is not easy to find out if it will work or not, so that text message will remain there. We have to think about all that. Re #3: Is echo problem common place with Ekiga and is a head set the only way to eliminate it? Yes for both; alternatively, I have seen USB microphone+speaker which do, they say, echo cancellation, probably in hardware, but this needs to be tested. No VoIP free software has professional echo cancellation support. Regarding Video Quality: My camera supports res up to 720p, Ekiga is suppose to support up to 480p but the picture I observed on my screen was rather poor. Besides lighting, is there anything I can do to improve the picture? Use maximum available resolution in ekiga. Try also the video control small window in ekiga (lighting, contrast etc.), once the call window is shown. On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Re #1: I was able to call another Ekiga user and had him call me. We were able to repeat that several times; therefore the right ports are open - yet I keep getting the same annoying error message every time Ekiga starts. [the problems in our connections were described on the thread: 'Ekiga test today'] What to do next? Re #3: Is echo problem common place with Ekiga and is a head set the only way to eliminate it? Regarding Video Quality: My camera supports res up to 720p, Ekiga is suppose to support up to 480p but the picture I observed on my screen was rather poor. Besides lighting, is there anything I can do to improve the picture? On 2/12/2013 12:19 PM, Eugen Dedu wrote: On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
I would be happy to try but I need to know what date. el_gallo_a...@ekiga.net De: Polaris pola...@vfemail.net Para: ekiga-list@gnome.org Enviado: Miércoles 13 de febrero de 2013 14:28 Asunto: Re: [Ekiga-list] Newbie questions Eugen Dedu suggested that first I must check whether I can be called to. So could someone please call me tomorrow at sip:tr...@ekiga.net after 5 pm by GMT - 8 time ? If unable to connect with me, please make a note of the time of your attempt on the list. Much appreciated! Tron. - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
On 12/02/13 20:08, Polaris wrote: Hi, just installed Ekiga and have the following questions: 1. Connectivity: Every time Ekiga starts I get the following error message: http://imageshack.us/photo/my-images/577/ekigaporterror.jpg/ I have since manually opened all the required ports and verified that they are open with PFPortChecker but the same error message still pops up. In both Echo and Call back tests, I hear and see myself so is everything working properly and if so how do I prevent this message from appearing? Check whether you can be called too. See http://wiki.ekiga.org/index.php/Understanding_NAT/firewall_issues_with_SIP_clients_%28eg_ekiga%29 for some information. 2. To confirm that I am getting out there and to see how things work, I wanted to call someone but every person I tried in the address book was unavailable. Would someone be so kind as to make themselves available for a short chat (I can make myself available during most of the day and am in GMT - 8 )? 3. Audio: During the tests there was a lot of echo even after I enabled echo cancellation in preferences. What can I do to improve the sound? Echo cancellation is not high quality. Buy a headset. 4. Video: Is there a way to make the video conference window occupy the whole screen (my monitor is set to 1024x768)? Use fullscreen in View menu during conversation. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Eugen Dedu suggested that first I must check whether I can be called to. So could someone please call me tomorrow at sip:tr...@ekiga.net after 5 pm by GMT - 8 time ? If unable to connect with me, please make a note of the time of your attempt on the list. Much appreciated! Tron. - VFEmail.net - http://www.vfemail.net $14.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options! ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Joshua Tarplin wrote: Question #1: Where can I find the FAQ for this maillist? Maybe http://wiki.ekiga.org? Question #2: Assuming it's not one of the questions answered in the FAQ, what binary should I download for use on OpenSuSE 11.1? The Ekiga web page lists only those for BSD, OpenSolaris, Windows...and the sources, of course. We do not yet have a binary for OpenSUSE. Each distribution builds programs itself; it's not us who build for all distributions (with a few exceptions). Please check in their own repositories. Ask if you do not know how to do it. -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie questions
Question #2: Assuming it's not one of the questions answered in the FAQ, what binary should I download for use on OpenSuSE 11.1? The Ekiga web page lists only those for BSD, OpenSolaris, Windows...and the sources, of course. We do not yet have a binary for OpenSUSE. Each distribution builds programs itself; it's not us who build for all distributions (with a few exceptions). Please check in their own repositories. Ask if you do not know how to do it. Merci, mon ami! Joshua ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list