[Elecraft] [K3] SubRx COR issue only in 'Diversty' mode?

[Jessie Oberreuter]

 My K3 (#286) just came back from the mothership with new syths and a 
SubRx (my first time with a KRX3! Woohoo!) and I'm seeing an odd bit of 
behavior:


	- If I'm running just the main receiver, xtal filter transitions 
are smooth and silent as usual.


	- If I'm running dual receive with independent VFOs (linked or 
unlinked, but NOT in 'diversity' mode), crystal filter transitions are 
independently smooth and silent on both the main and the sub, with the sub 
using the AUX antenna or sharing the main antenna.


	- The moment I switch to diversity mode proper, a relay clicks and 
the SubRx loses its antenna, as if the Carrier Operated Relay just 
activated.  If I then change the filter bandwidth, each time the xtal 
filter changes, I get a relay click, and a burst of sound from the SubRx 
(like the COR just turned off for a moment), and then another click and 
I'm back to no antenna.  Doesn't matter if I select the main or AUX 
antenna -- the COR stays engaged so long as I am in diversity mode.


 AFAICT, there's no hardware difference between these states, so my 
best guess would be that I have a bit loose in my config data or I've run 
into an upgrade/firmware bug.  I've tried toggling SPLIT, toggling RFI 
Detect, and trasmitting -- just in case it was something uninitialized -- 
but the COR stays with me whenever I'm in diversity.  Thoughts?


 BTW, love the new toy!

-kb7psg
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Kenneth Christiansen]

Hi to the group

I have wanted option 2 for several years. I have asked for it a couple of times 
but never heard anything back. My shack is small and my portable operation is 
even smaller. I always send with macros but trying to read the small screen on 
the K3S is a problem. I have a KX3 and PX3 and find the PX3 works just the way 
I want except it will not work with the K3S.

Thanks for the bandwidth and I hope soon we get the ability to display the TX 
and RX information on the {3. I feel this is even more. Important for my 
contest operation even if my scores are low.

73

Ken W0CZ

Sent from my iPad

> On Aug 26, 2016, at 11:15 AM, Joe Stone (KF5WBO)  
> wrote:
> 
> Thank you, Art.
> 
> We've been discussing two new features on this thread ...
> 
> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
> connect a PX3 to an SVGA large screen.
> 
> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
> write,
> 
>  * text decoded by the K3, and
>  * text to be transmitted
> 
> to the P3 TFT-LCD display (without the need for a P3SVGA).
> 
> If you're interested in one or both of these new features, please reply to
> this thread.  This is how Wayne prioritizes new products / features.
> 
> Please take into consideration that for many (most?) KX3 owners, the KX3
> serves as their one and only one HF rig.  While the jokes about lugging an
> SVGA monitor to a mountain peak are clever, they fail to recognize the
> reality that a majority of KX3 operating hours are spent at the home QTH.
> 
> 73's
> 
> Joe
> KF5WBO
> 
> 
>> Wayne, 
>> 
>> If you are looking for interested parties, I for one would be interested —
>> also
>> along with that mythical BIG amplifier if you ever get the itch again — hi
>> hi 
>> 
>> 73, 
>> 
>> Art Peters, K0ACP
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w...@i29.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Wizkers:Radio update: KX2/KX3/K3 rig controller for Mac, Windows, Linux, Android and Chromebooks

[Clay Autery]

Please confirm...

Supports K3s yes or no?

Thanks!  73,

__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 8/26/2016 4:11 PM, Edouard Lafargue wrote:
> Hi everyone,
>
>Just a quick note on the latest release of Wizkers:Radio which went live
> earlier this week.
>
>For Elecraft users, this latest version introduces pixel-perfect fonts
> for the LCD screen, which in my humble opinion look absolutely great. I can
> say that since I am not the author, we owe those to Richar, OK3AR, many
> thanks to him for this!
>
>  This might sound like a gimmick, but when using Wizkers:Radio over a
> VNC link to remotely control an Elecraft rig, it is actually quite nice to
> have a realistic rendering of the rig front panel.
>
> More details below:
> http://forum.wizkers.io/t/wizkers-radio-0-2-6-released/146
>
> Ed
> W6ELA

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 ant control

[Fred Jensen]

If you have more than one antenna for a band (I did before we moved), 
the KAT500 Utility allows you to enable them for a particular band and 
choose which will be the default when the K3 goes to that band.  If you 
want the other(s), you press the ANT button on the KA%500, and it will 
cycle through the 3 antenna connectors that are enabled for that band. 
I don't know of any other way to do that from the K3.


73,

Fred K6DGW
Sparks NV
Washoe County DM09dn

On 8/26/2016 4:12 PM, Cady, Fred wrote:

In a way you can.  Once you have selected an antenna for a particular
band, when you return to that band it will automatically be
selected.

Cheers,

Fred KE7X


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 ant control

[Cady, Fred]

In a way you can.  Once you have selected an antenna for a particular band, 
when you return to that band it will automatically be selected.

Cheers,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com.




From: Elecraft  on behalf of Brian D. Comer 

Sent: Friday, August 26, 2016 4:17 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 ant control

Can I change the KAT500 ant selection from the K3s

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fc...@montana.edu

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Jim Finan]

Both sound good to me...

Jim Finan
AB4AC ‎
Sent from my BlackBerry 10 smartphone.
  Original Message  
From: Michael Wong
Sent: Friday, August 26, 2016 6:09 PM
To: Steve
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and 
Decoded Text to Native P3 Screen

+1 on HDMI (or DisplayPort).

> On Aug 26, 2016, at 3:06 PM, Steve  wrote:
> 
> #1 but with HDMI...
> 
> 73, steve WB3LGC
> 
> 
> On 8/26/2016 12:15 PM, Joe Stone (KF5WBO) wrote:
>> Thank you, Art.
>> 
>> We've been discussing two new features on this thread ...
>> 
>> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
>> connect a PX3 to an SVGA large screen.
>> 
>> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
>> write,
>> 
>> * text decoded by the K3, and
>> * text to be transmitted
>> 
>> to the P3 TFT-LCD display (without the need for a P3SVGA).
>> 
>> If you're interested in one or both of these new features, please reply to
>> this thread. This is how Wayne prioritizes new products / features.
>> 
>> Please take into consideration that for many (most?) KX3 owners, the KX3
>> serves as their one and only one HF rig. While the jokes about lugging an
>> SVGA monitor to a mountain peak are clever, they fail to recognize the
>> reality that a majority of KX3 operating hours are spent at the home QTH.
>> 
>> 73's
>> 
>> Joe
>> KF5WBO
>> 
>> 
>>> Wayne,
>>> 
>>> If you are looking for interested parties, I for one would be interested —
>>> also
>>> along with that mythical BIG amplifier if you ever get the itch again — hi
>>> hi
>>> 
>>> 73,
>>> 
>>> Art Peters, K0ACP
>> 
>> 
>> --
>> View this message in context: 
>> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to sm.shearer...@gmail.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to michaelw...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jimfi...@att.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Andrew Hebden]

Yes please, #1 with HDMI
Andrew G8BYB



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to connect a PX3 to an SVGA large screen.

[Gerard Elijzen]

Feature 1 for me. Would be very nice as I use the KX3 from my RV.

Thanks
Gerard VK2JNG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KAT500 ant control

[Brian D. Comer]

Can I change the KAT500 ant selection from the K3s

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Michael Blake]

+2 on HDMI or DisplayPort.

73 - Mike - K9JRI







> On Aug 26, 2016, at 6:08 PM, Michael Wong  wrote:
> 
> +1 on HDMI (or DisplayPort).
> 
>> On Aug 26, 2016, at 3:06 PM, Steve > > wrote:
>> 
>> #1 but with HDMI...
>> 
>> 73, steve WB3LGC
>> 
>> 
>> On 8/26/2016 12:15 PM, Joe Stone (KF5WBO) wrote:
>>> Thank you, Art.
>>> 
>>> We've been discussing two new features on this thread ...
>>> 
>>> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
>>> connect a PX3 to an SVGA large screen.
>>> 
>>> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
>>> write,
>>> 
>>>  * text decoded by the K3, and
>>>  * text to be transmitted
>>> 
>>> to the P3 TFT-LCD display (without the need for a P3SVGA).
>>> 
>>> If you're interested in one or both of these new features, please reply to
>>> this thread.  This is how Wayne prioritizes new products / features.
>>> 
>>> Please take into consideration that for many (most?) KX3 owners, the KX3
>>> serves as their one and only one HF rig.  While the jokes about lugging an
>>> SVGA monitor to a mountain peak are clever, they fail to recognize the
>>> reality that a majority of KX3 operating hours are spent at the home QTH.
>>> 
>>> 73's
>>> 
>>> Joe
>>> KF5WBO
>>> 
>>> 
 Wayne,
 
 If you are looking for interested parties, I for one would be interested —
 also
 along with that mythical BIG amplifier if you ever get the itch again — hi
 hi
 
 73,
 
 Art Peters, K0ACP
>>> 
>>> 
>>> --
>>> View this message in context: 
>>> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to sm.shearer...@gmail.com
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to michaelw...@mac.com 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft@mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> 
> Message delivered to k9...@mac.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Michael Wong]

+1 on HDMI (or DisplayPort).

> On Aug 26, 2016, at 3:06 PM, Steve  wrote:
> 
> #1 but with HDMI...
> 
> 73, steve WB3LGC
> 
> 
> On 8/26/2016 12:15 PM, Joe Stone (KF5WBO) wrote:
>> Thank you, Art.
>> 
>> We've been discussing two new features on this thread ...
>> 
>> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
>> connect a PX3 to an SVGA large screen.
>> 
>> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
>> write,
>> 
>>   * text decoded by the K3, and
>>   * text to be transmitted
>> 
>> to the P3 TFT-LCD display (without the need for a P3SVGA).
>> 
>> If you're interested in one or both of these new features, please reply to
>> this thread.  This is how Wayne prioritizes new products / features.
>> 
>> Please take into consideration that for many (most?) KX3 owners, the KX3
>> serves as their one and only one HF rig.  While the jokes about lugging an
>> SVGA monitor to a mountain peak are clever, they fail to recognize the
>> reality that a majority of KX3 operating hours are spent at the home QTH.
>> 
>> 73's
>> 
>> Joe
>> KF5WBO
>> 
>> 
>>> Wayne,
>>> 
>>> If you are looking for interested parties, I for one would be interested —
>>> also
>>> along with that mythical BIG amplifier if you ever get the itch again — hi
>>> hi
>>> 
>>> 73,
>>> 
>>> Art Peters, K0ACP
>> 
>> 
>> --
>> View this message in context: 
>> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to sm.shearer...@gmail.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to michaelw...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Steve]

#1 but with HDMI...

73, steve WB3LGC


On 8/26/2016 12:15 PM, Joe Stone (KF5WBO) wrote:

Thank you, Art.

We've been discussing two new features on this thread ...

Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
connect a PX3 to an SVGA large screen.

Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
write,

   * text decoded by the K3, and
   * text to be transmitted

to the P3 TFT-LCD display (without the need for a P3SVGA).

If you're interested in one or both of these new features, please reply to
this thread.  This is how Wayne prioritizes new products / features.

Please take into consideration that for many (most?) KX3 owners, the KX3
serves as their one and only one HF rig.  While the jokes about lugging an
SVGA monitor to a mountain peak are clever, they fail to recognize the
reality that a majority of KX3 operating hours are spent at the home QTH.

73's

Joe
KF5WBO



Wayne,

If you are looking for interested parties, I for one would be interested —
also
along with that mythical BIG amplifier if you ever get the itch again — hi
hi

73,

Art Peters, K0ACP



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sm.shearer...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Art Peters]

Joe,

Thanks for asking, at this point, I’m looking for Feature #1, as I only have a 
KX-Line.

However, next spring, I am contemplating a full K-Line and would find value in 
#2 at that time.

73,

Art Peters, K0ACP
k0...@k0acp.com



> On Aug 26, 2016, at 12:15 PM, Joe Stone (KF5WBO)  
> wrote:
> 
> Thank you, Art.
> 
> We've been discussing two new features on this thread ...
> 
> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
> connect a PX3 to an SVGA large screen.
> 
> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
> write,
> 
>  * text decoded by the K3, and
>  * text to be transmitted
> 
> to the P3 TFT-LCD display (without the need for a P3SVGA).
> 
> If you're interested in one or both of these new features, please reply to
> this thread.  This is how Wayne prioritizes new products / features.
> 
> Please take into consideration that for many (most?) KX3 owners, the KX3
> serves as their one and only one HF rig.  While the jokes about lugging an
> SVGA monitor to a mountain peak are clever, they fail to recognize the
> reality that a majority of KX3 operating hours are spent at the home QTH.
> 
> 73's
> 
> Joe
> KF5WBO
> 
> 
>> Wayne, 
>> 
>> If you are looking for interested parties, I for one would be interested —
>> also
>> along with that mythical BIG amplifier if you ever get the itch again — hi
>> hi 
>> 
>> 73, 
>> 
>> Art Peters, K0ACP
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k0...@k0acp.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Wizkers:Radio update: KX2/KX3/K3 rig controller for Mac, Windows, Linux, Android and Chromebooks

[Edouard Lafargue]

Hi everyone,

   Just a quick note on the latest release of Wizkers:Radio which went live
earlier this week.

   For Elecraft users, this latest version introduces pixel-perfect fonts
for the LCD screen, which in my humble opinion look absolutely great. I can
say that since I am not the author, we owe those to Richar, OK3AR, many
thanks to him for this!

 This might sound like a gimmick, but when using Wizkers:Radio over a
VNC link to remotely control an Elecraft rig, it is actually quite nice to
have a realistic rendering of the rig front panel.

More details below:
http://forum.wizkers.io/t/wizkers-radio-0-2-6-released/146

Ed
W6ELA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Michael Wong]

I vote for Feature 1, having recently acquired a PX3. I run an SDRPlay with 
various software radio UIs on my laptop and having the PX3 outputting VGA (or 
DisplayPort perhaps) would probably simplify my setup by replacing the laptop 
with a flatscreen monitor. 



> On Aug 26, 2016, at 9:15 AM, Joe Stone (KF5WBO)  
> wrote:
> 
> Thank you, Art.
> 
> We've been discussing two new features on this thread ...
> 
> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
> connect a PX3 to an SVGA large screen.
> 
> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
> write,
> 
>  * text decoded by the K3, and
>  * text to be transmitted
> 
> to the P3 TFT-LCD display (without the need for a P3SVGA).
> 
> If you're interested in one or both of these new features, please reply to
> this thread.  This is how Wayne prioritizes new products / features.
> 
> Please take into consideration that for many (most?) KX3 owners, the KX3
> serves as their one and only one HF rig.  While the jokes about lugging an
> SVGA monitor to a mountain peak are clever, they fail to recognize the
> reality that a majority of KX3 operating hours are spent at the home QTH.
> 
> 73's
> 
> Joe
> KF5WBO
> 
> 
>> Wayne, 
>> 
>> If you are looking for interested parties, I for one would be interested —
>> also
>> along with that mythical BIG amplifier if you ever get the itch again — hi
>> hi 
>> 
>> 73, 
>> 
>> Art Peters, K0ACP
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to michaelw...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[GRANT YOUNGMAN]

There would also need to be a way to easily toggle between the text display and 
the TXMON display by a function key assignment that would toggle between them 
perhaps. There’s only so much screen real estate.  Or perhaps a small TXMON 
window in one corner somewhere.

Of course, if you don’t use TXMON it doesn’t matter, but for those of us that 
do ... it would.  

Grant NQ5T


> On Aug 26, 2016, at 1:20 PM, Phil Hystad  wrote:
> 
> I will vote for Feature #2.  I am neutral on Feature #1 as I do not currently 
> own a PX3 and using
> a display screen along with it (if I do purchase a PX3 someday) is not in my 
> plans.
> 
> 73, phil, K7PEH
> 
> 
>> 
>> 
>> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
>> write,
>> 
>> * text decoded by the K3, and
>> * text to be transmitted
>> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Phil Hystad]

I will vote for Feature #2.  I am neutral on Feature #1 as I do not currently 
own a PX3 and using
a display screen along with it (if I do purchase a PX3 someday) is not in my 
plans.

73, phil, K7PEH


> On Aug 26, 2016, at 9:15 AM, Joe Stone (KF5WBO)  
> wrote:
> 
> Thank you, Art.
> 
> We've been discussing two new features on this thread ...
> 
> Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
> connect a PX3 to an SVGA large screen.
> 
> Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
> write,
> 
>  * text decoded by the K3, and
>  * text to be transmitted
> 
> to the P3 TFT-LCD display (without the need for a P3SVGA).
> 
> If you're interested in one or both of these new features, please reply to
> this thread.  This is how Wayne prioritizes new products / features.
> 
> Please take into consideration that for many (most?) KX3 owners, the KX3
> serves as their one and only one HF rig.  While the jokes about lugging an
> SVGA monitor to a mountain peak are clever, they fail to recognize the
> reality that a majority of KX3 operating hours are spent at the home QTH.
> 
> 73's
> 
> Joe
> KF5WBO
> 
> 
>> Wayne, 
>> 
>> If you are looking for interested parties, I for one would be interested —
>> also
>> along with that mythical BIG amplifier if you ever get the itch again — hi
>> hi 
>> 
>> 73, 
>> 
>> Art Peters, K0ACP
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phys...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[Jim Brown]

Don has pointed out the SPKR + PHONES toggle. Many of us assign it to 
one of the PF buttons, PF1 or PF2. I choose PF2, which is a "long push" 
of XIT. The manual tells how to do that.


73, Jim K9YC

On Fri,8/26/2016 4:12 AM, 2EØLDZ wrote:

Unless anyone knows how, it would be great to have selectivity between the rear 
panel headset audio and the speaker, internal or external.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

[Joe Stone (KF5WBO)]

Thank you, Art.

We've been discussing two new features on this thread ...

Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to
connect a PX3 to an SVGA large screen.

Feature #2. Elecraft (Paul Saffren, N6HZ) to modify the P3 firmware to
write,

  * text decoded by the K3, and
  * text to be transmitted

to the P3 TFT-LCD display (without the need for a P3SVGA).

If you're interested in one or both of these new features, please reply to
this thread.  This is how Wayne prioritizes new products / features.

Please take into consideration that for many (most?) KX3 owners, the KX3
serves as their one and only one HF rig.  While the jokes about lugging an
SVGA monitor to a mountain peak are clever, they fail to recognize the
reality that a majority of KX3 operating hours are spent at the home QTH.

73's

Joe
KF5WBO


> Wayne, 
> 
> If you are looking for interested parties, I for one would be interested —
> also
> along with that mythical BIG amplifier if you ever get the itch again — hi
> hi 
> 
> 73, 
> 
> Art Peters, K0ACP



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/PX3-PX3SVGA-P3-PX3-to-SVGA-Large-Screen-and-Decoded-Text-to-Native-P3-Screen-tp7621828.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX2 QUESTION

[Cady, Fred]

Yes, but you cannot use RTS and DTR for CW keying and PTT unless you split them 
out from the serial cable.

Cheers,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com (KX2 books 
available very soon)



From: Elecraft  on behalf of Robert 'RC' 
Conley 
Sent: Friday, August 26, 2016 7:57 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] KX2 QUESTION

will the KX2 interface with a computer as my K3 does for computer control?

--
Live Long and Prosper
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fc...@montana.edu

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[2EØLDZ]

Don 

Thanks. I have found it and set it up as a custom button. Now to make further 
adjustments

73
Trevor Clapp
M6LDZ
2E0LDZ
l...@chopcat.co.uk 

RADIO BLOG 

07900 49 77 11





> On 26 Aug 2016, at 14:04, Don Wilhelm  wrote:
> 
> Trevor,
> 
> Turn in the manual to the listing of menu items.  There you will find what 
> characteristics of the K3S (or any radio for that manner) can be altered to 
> suit your desires and operating practices.
> While the default settings are OK, they are set for the "average" user (if 
> that really exists).  Each of us has our own preferences and the K3S has a 
> lot of things that can be altered for the individual and his/her station 
> requirements.
> 
> Those menu items are not typically used during normal operating, but look at 
> them as "setup" capabilities.  Once setup is complete, you should not have to 
> change those menu items frequently.
> 
> 73,
> Don W3FPR
> 
> On 8/26/2016 8:47 AM, 2EØLDZ wrote:
>> you guys are brilliant thanks.  you can tell i have only had it a few days - 
>> excelled all expectations and I can’t wait to get the K3 utility for mac 
>> that will allow full programming of the K-Pod
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX2 computer rig control

[Robert 'RC' Conley]

To be more specific with my K3 I'm using N1MM classic for contest logging
and sometime N3FJP regular logging. These work very fine with K3/100. Just
wish to make certain that I will not need a completely new system
RC
 KC5WA

-- 
Live Long and Prosper
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX2 QUESTION

[David F. Reed]

It does work great for me; probably depends on the rig control software you
are using; I use DXLabs Commander (and the rest of the suite).

73 de Dave, W5SV

On Fri, Aug 26, 2016 at 8:57 AM, Robert 'RC' Conley 
wrote:

> will the KX2 interface with a computer as my K3 does for computer control?
>
> --
> Live Long and Prosper
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w5sv.d...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX2 QUESTION

[Robert 'RC' Conley]

will the KX2 interface with a computer as my K3 does for computer control?

-- 
Live Long and Prosper
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[Don Wilhelm]

Trevor,

Turn in the manual to the listing of menu items.  There you will find 
what characteristics of the K3S (or any radio for that manner) can be 
altered to suit your desires and operating practices.
While the default settings are OK, they are set for the "average" user 
(if that really exists).  Each of us has our own preferences and the K3S 
has a lot of things that can be altered for the individual and his/her 
station requirements.


Those menu items are not typically used during normal operating, but 
look at them as "setup" capabilities.  Once setup is complete, you 
should not have to change those menu items frequently.


73,
Don W3FPR

On 8/26/2016 8:47 AM, 2EØLDZ wrote:
you guys are brilliant thanks.  you can tell i have only had it a few 
days - excelled all expectations and I can’t wait to get the K3 
utility for mac that will allow full programming of the K-Pod


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[2EØLDZ]

you guys are brilliant thanks.  you can tell i have only had it a few days - 
excelled all expectations and I can’t wait to get the K3 utility for mac that 
will allow full programming of the K-Pod

cheers
Trevor



Trevor Clapp
M6LDZ
2E0LDZ
l...@chopcat.co.uk 

RADIO BLOG 

07900 49 77 11





> On 26 Aug 2016, at 13:42, Don Wilhelm  wrote:
> 
> Trevor,
> 
> Just turn SPKR+PHones on in the K3(K3S) menu.
> In voice modes, you are likely to get audio feedback unless you turn the MON 
> to zero.
> 
> 73,
> Don W3FPR
> 
> On 8/26/2016 7:12 AM, 2EØLDZ wrote:
>> Unless anyone knows how, it would be great to have selectivity between the 
>> rear panel headset audio and the speaker, internal or external.
>> 
>> Why?
>> 
>> When we are contesting we use headsets but when setting up you want to hear 
>> the audio without headsets on and sometimes, in the middle of the action, 
>> you want to share the audio with someone to clarify something without going 
>> round the back and unplugging the headset leads.
>> 
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[Dave Fugleberg]

Check out the SPKR+PH setting in the menu. Turn on when you want to hear
the speakers. You can program a PF key to toggle that mode if you want.
On Fri, Aug 26, 2016 at 6:12 AM 2EØLDZ  wrote:

> Unless anyone knows how, it would be great to have selectivity between the
> rear panel headset audio and the speaker, internal or external.
>
> Why?
>
> When we are contesting we use headsets but when setting up you want to
> hear the audio without headsets on and sometimes, in the middle of the
> action, you want to share the audio with someone to clarify something
> without going round the back and unplugging the headset leads.
>
> I am guessing that the rear phones and front phones are common so any one
> disconnects the speakers.  Would it be possible to link the front phones to
> the FP Mic selection, which seems sort of logical.  Then you could switch
> to the hand mic to demonstrate/share and then back to the headset with RP
> mic.
>
> Just a suggestion!
>
>
> Trevor Clapp
> M6LDZ
> 2E0LDZ
> l...@chopcat.co.uk 
>
> RADIO BLOG 
>
> 07900 49 77 11
>
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave.w...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Speaker Suggestions K3S

[Don Wilhelm]

Trevor,

Just turn SPKR+PHones on in the K3(K3S) menu.
In voice modes, you are likely to get audio feedback unless you turn the 
MON to zero.


73,
Don W3FPR

On 8/26/2016 7:12 AM, 2EØLDZ wrote:

Unless anyone knows how, it would be great to have selectivity between the rear 
panel headset audio and the speaker, internal or external.

Why?

When we are contesting we use headsets but when setting up you want to hear the 
audio without headsets on and sometimes, in the middle of the action, you want 
to share the audio with someone to clarify something without going round the 
back and unplugging the headset leads.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [P3] [PX3][PX3SVGA ] Display Text Decoding on the screen

[Art Peters]

Wayne,

If you are looking for interested parties, I for one would be interested — also 
along with that mythical BIG amplifier if you ever get the itch again — hi hi 

73,

Art Peters, K0ACP
k0...@k0acp.com



> On Aug 24, 2016, at 11:52 PM, Wayne Burdick  wrote:
> 
> Hi Joe,
> 
> The hooks are in place, but I can't say for sure that we'll offer one.
> 
> 73,
> Wayne
> N6KR
> 
> 
> On Aug 24, 2016, at 8:39 PM, "Joe Stone (KF5WBO)"  > wrote:
> 
>> 
>> Thank you, Wayne.  On a related topic ...
>> 
>> What's the history of the PX3SVGA (i.e., an internal SVGA large screen
>> adapter for the PX3) or lack there of?
>> 
>> 73's
>> 
>> Joe
>> KF5WBO
>> 
>> 
>> 
>> --
>> View this message in context: 
>> http://elecraft.365791.n2.nabble.com/P3-Px3-Display-Text-Decoding-on-the-screen-tp7621750p7621786.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@elecraft.com 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft@mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> 
> Message delivered to k0...@k0acp.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Speaker Suggestions K3S

[2EØLDZ]

Unless anyone knows how, it would be great to have selectivity between the rear 
panel headset audio and the speaker, internal or external.

Why?

When we are contesting we use headsets but when setting up you want to hear the 
audio without headsets on and sometimes, in the middle of the action, you want 
to share the audio with someone to clarify something without going round the 
back and unplugging the headset leads.

I am guessing that the rear phones and front phones are common so any one 
disconnects the speakers.  Would it be possible to link the front phones to the 
FP Mic selection, which seems sort of logical.  Then you could switch to the 
hand mic to demonstrate/share and then back to the headset with RP mic.

Just a suggestion!


Trevor Clapp
M6LDZ
2E0LDZ
l...@chopcat.co.uk 

RADIO BLOG 

07900 49 77 11





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Utility for Mac

[Robert Brock]

There are two aspects in the terminal mode pertaining to CW that need
adjustment.  There is no auto scrolling for typed text to be transmitted in
the bottom panel and the separation bar between received and transmitted
text is frozen and can't be moved.  I don't use the received text per se but
wold like to be able to set more rom for transmitted text.  Both of these
were corrected in the Windiows version but not the Mac version.  

I contacted Howard and he said these were on the list, but that was more
than six months ago.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Utility-for-Mac-tp7621792p7621816.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com